ref: b12b052a7196b4ff50cf12ccd92e9cdd308aa82f
dir: /sys/src/9/kw/usbehci.h/
/* override default macros from ../port/usb.h */
#undef dprint
#undef ddprint
#undef deprint
#undef ddeprint
#define dprint if(ehcidebug)print
#define ddprint if(ehcidebug>1)print
#define deprint if(ehcidebug || ep->debug)print
#define ddeprint if(ehcidebug>1 || ep->debug>1)print
typedef struct Ctlr Ctlr;
typedef struct Ecapio Ecapio;
typedef struct Eopio Eopio;
typedef struct Edbgio Edbgio;
typedef struct Isoio Isoio;
typedef struct Poll Poll;
typedef struct Qh Qh;
typedef struct Qtree Qtree;
#pragma incomplete Ctlr;
#pragma incomplete Ecapio;
#pragma incomplete Eopio;
#pragma incomplete Edbgio;
#pragma incomplete Isoio;
#pragma incomplete Poll;
#pragma incomplete Qh;
#pragma incomplete Qtree;
/*
* EHCI interface registers and bits
*/
enum
{
Cnports = 0xF, /* nport bits in Ecapio parms. */
Cdbgportshift = 20, /* debug port in Ecapio parms. */
Cdbgportmask = 0xF,
C64 = 1, /* 64-bits, in Ecapio capparms. */
Ceecpshift = 8, /* extended capabilities ptr. in */
Ceecpmask = 8, /* the Ecapio capparms reg. */
Clegacy = 1, /* legacy support cap. id */
CLbiossem = 2, /* legacy cap. bios sem. */
CLossem = 3, /* legacy cap. os sem */
/* typed links */
Lterm = 1,
Litd = 0<<1,
Lqh = 1<<1,
Lsitd = 2<<1,
Lfstn = 3<<1, /* we don't use these */
/* Cmd reg. */
Cstop = 0x00000, /* stop running */
Crun = 0x00001, /* start operation */
Chcreset = 0x00002, /* host controller reset */
Cflsmask = 0x0000C, /* frame list size bits */
Cfls1024 = 0x00000, /* frame list size 1024 */
Cfls512 = 0x00004, /* frame list size 512 frames */
Cfls256 = 0x00008, /* frame list size 256 frames */
Cpse = 0x00010, /* periodic sched. enable */
Case = 0x00020, /* async sched. enable */
Ciasync = 0x00040, /* interrupt on async advance doorbell */
Citc1 = 0x10000, /* interrupt threshold ctl. 1 µframe */
Citc4 = 0x40000, /* same. 2 µframes */
/* ... */
Citc8 = 0x80000, /* same. 8 µframes (can go up to 64) */
/* Sts reg. */
Sasyncss = 0x08000, /* aync schedule status */
Speriodss = 0x04000, /* periodic schedule status */
Srecl = 0x02000, /* reclamnation (empty async sched.) */
Shalted = 0x01000, /* h.c. is halted */
Sasync = 0x00020, /* interrupt on async advance */
Sherr = 0x00010, /* host system error */
Sfrroll = 0x00008, /* frame list roll over */
Sportchg = 0x00004, /* port change detect */
Serrintr = 0x00002, /* error interrupt */
Sintr = 0x00001, /* interrupt */
Sintrs = 0x0003F, /* interrupts status */
/* Intr reg. */
Iusb = 0x01, /* intr. on usb */
Ierr = 0x02, /* intr. on usb error */
Iportchg = 0x04, /* intr. on port change */
Ifrroll = 0x08, /* intr. on frlist roll over */
Ihcerr = 0x10, /* intr. on host error */
Iasync = 0x20, /* intr. on async advance enable */
Iall = 0x3F, /* all interrupts */
/* Config reg. */
Callmine = 1, /* route all ports to us */
/* Portsc reg. */
Pspresent = 0x00000001, /* device present */
Psstatuschg = 0x00000002, /* Pspresent changed */
Psenable = 0x00000004, /* device enabled */
Pschange = 0x00000008, /* Psenable changed */
Psresume = 0x00000040, /* resume detected */
Pssuspend = 0x00000080, /* port suspended */
Psreset = 0x00000100, /* port reset */
Pspower = 0x00001000, /* port power on */
Psowner = 0x00002000, /* port owned by companion */
Pslinemask = 0x00000C00, /* line status bits */
Pslow = 0x00000400, /* low speed device */
/* Debug port csw reg. */
Cowner = 0x40000000, /* port owned by ehci */
Cenable = 0x10000000, /* debug port enabled */
Cdone = 0x00010000, /* request is done */
Cbusy = 0x00000400, /* port in use by a driver */
Cerrmask= 0x00000380, /* error code bits */
Chwerr = 0x00000100, /* hardware error */
Cterr = 0x00000080, /* transaction error */
Cfailed = 0x00000040, /* transaction did fail */
Cgo = 0x00000020, /* execute the transaction */
Cwrite = 0x00000010, /* request is a write */
Clen = 0x0000000F, /* data len */
/* Debug port pid reg. */
Prpidshift = 16, /* received pid */
Prpidmask = 0xFF,
Pspidshift = 8, /* sent pid */
Pspidmask = 0xFF,
Ptokshift = 0, /* token pid */
Ptokmask = 0xFF,
Ptoggle = 0x00008800, /* to update toggles */
Ptogglemask = 0x0000FF00,
/* Debug port addr reg. */
Adevshift = 8, /* device address */
Adevmask = 0x7F,
Aepshift = 0, /* endpoint number */
Aepmask = 0xF,
};
/*
* Capability registers (hw)
*/
struct Ecapio
{
ulong cap; /* 00 controller capability register */
ulong parms; /* 04 structural parameters register */
ulong capparms; /* 08 capability parameters */
ulong portroute; /* 0c not on the CS5536 */
};
/*
* Debug port registers (hw)
*/
struct Edbgio
{
ulong csw; /* control and status */
ulong pid; /* USB pid */
uchar data[8]; /* data buffer */
ulong addr; /* device and endpoint addresses */
};
struct Poll
{
Lock;
Rendez;
int must;
int does;
};
struct Ctlr
{
Rendez; /* for waiting to async advance doorbell */
Lock; /* for ilock. qh lists and basic ctlr I/O */
QLock portlck; /* for port resets/enable... (and doorbell) */
int active; /* in use or not */
Ecapio* capio; /* Capability i/o regs */
Eopio* opio; /* Operational i/o regs */
void* (*tdalloc)(ulong,int,ulong);
void* (*dmaalloc)(ulong);
void (*dmafree)(void*);
int nframes; /* 1024, 512, or 256 frames in the list */
ulong* frames; /* periodic frame list (hw) */
Qh* qhs; /* async Qh circular list for bulk/ctl */
Qtree* tree; /* tree of Qhs for the periodic list */
int ntree; /* number of dummy qhs in tree */
Qh* intrqhs; /* list of (not dummy) qhs in tree */
Isoio* iso; /* list of active Iso I/O */
ulong load;
ulong isoload;
int nintr; /* number of interrupts attended */
int ntdintr; /* number of intrs. with something to do */
int nqhintr; /* number of async td intrs. */
int nisointr; /* number of periodic td intrs. */
int nreqs;
Poll poll;
};
/*
* Kirkwood-specific stuff
*/
/*
* Operational registers (hw)
*/
struct Eopio
{
ulong cmd; /* 00 command */
ulong sts; /* 04 status */
ulong intr; /* 08 interrupt enable */
ulong frno; /* 0c frame index */
ulong seg; /* 10 bits 63:32 of EHCI datastructs (unused) */
ulong frbase; /* 14 frame list base addr, 4096-byte boundary */
ulong link; /* 18 link for async list */
uchar d2c[0x40-0x1c]; /* 1c dummy */
ulong config; /* 40 1: all ports default-routed to this HC */
ulong portsc[1]; /* 44 Port status and control, one per port */
/*
* these are present on the Kirkwood USB controller.
* are they standard now? Marvell doesn't document them publically.
*/
uchar _pad0[0x64-0x48];
ulong otgsc;
ulong usbmode;
ulong epsetupsts;
ulong epprime;
ulong epflush;
ulong epsts;
ulong epcompl;
ulong epctl[6];
/* freescale registers */
uchar _pad1[0x2c0-0x98];
ulong snoop1;
ulong snoop2;
ulong agecntthresh;
ulong prictl; /* priority control */
ulong sictl; /* system interface control */
uchar _pad2[0x3c0-0x2d4];
ulong ctl;
};
extern int ehcidebug;
void ehcilinkage(Hci *hp);
void ehcimeminit(Ctlr *ctlr);
void ehcirun(Ctlr *ctlr, int on);
#define dmaflush(clean, addr, len)