ref: b94490d84161673a6d3945adabae9787b713534d
dir: /src/scopes/ft2_scopes.c/
// for finding memory leaks in debug mode with Visual Studio
#if defined _DEBUG && defined _MSC_VER
#include <crtdbg.h>
#endif
#include <stdint.h>
#include <stdbool.h>
#include <math.h> // modf()
#ifndef _WIN32
#include <unistd.h> // usleep()
#endif
#include "../ft2_header.h"
#include "../ft2_events.h"
#include "../ft2_config.h"
#include "../ft2_audio.h"
#include "../ft2_gui.h"
#include "../ft2_midi.h"
#include "../ft2_bmp.h"
#include "../ft2_mouse.h"
#include "../ft2_video.h"
#include "../ft2_tables.h"
#include "../ft2_structs.h"
#include "../ft2_hpc.h"
#include "ft2_scopes.h"
#include "ft2_scopedraw.h"
static volatile bool scopesUpdatingFlag, scopesDisplayingFlag;
static hpc_t scopeHpc;
static volatile scope_t scope[MAX_CHANNELS];
static SDL_Thread *scopeThread;
lastChInstr_t lastChInstr[MAX_CHANNELS]; // global
int32_t getSamplePosition(uint8_t ch)
{
if (ch >= song.numChannels)
return -1;
volatile scope_t *sc = &scope[ch];
// cache some stuff
volatile bool active = sc->active;
volatile int32_t position = sc->position;
volatile int32_t sampleEnd = sc->sampleEnd;
if (!active || sampleEnd == 0)
return -1;
if (position >= 0 && position < sampleEnd)
return position;
return -1; // not active or overflown
}
void stopAllScopes(void)
{
// wait for scopes to finish updating
while (scopesUpdatingFlag);
volatile scope_t *sc = scope;
for (int32_t i = 0; i < MAX_CHANNELS; i++, sc++)
sc->active = false;
// wait for scope displaying to be done (safety)
while (scopesDisplayingFlag);
}
// toggle mute
static void setChannel(int32_t chNr, bool on)
{
channel_t *ch = &channel[chNr];
ch->channelOff = !on;
if (ch->channelOff)
{
ch->efx = 0;
ch->efxData = 0;
ch->realVol = 0;
ch->outVol = 0;
ch->oldVol = 0;
ch->dFinalVol = 0.0;
ch->outPan = 128;
ch->oldPan = 128;
ch->finalPan = 128;
ch->status = IS_Vol;
ch->keyOff = true; // non-FT2 bug fix for stuck piano keys
}
scope[chNr].wasCleared = false;
}
static void drawScopeNumber(uint16_t scopeXOffs, uint16_t scopeYOffs, uint8_t chNr, bool outline)
{
scopeXOffs++;
scopeYOffs++;
chNr++;
if (outline)
{
if (chNr < 10) // one digit?
{
charOutOutlined(scopeXOffs, scopeYOffs, PAL_MOUSEPT, '0' + chNr);
}
else
{
charOutOutlined(scopeXOffs, scopeYOffs, PAL_MOUSEPT, chDecTab1[chNr]);
charOutOutlined(scopeXOffs + 7, scopeYOffs, PAL_MOUSEPT, chDecTab2[chNr]);
}
}
else
{
if (chNr < 10) // one digit?
{
charOut(scopeXOffs, scopeYOffs, PAL_MOUSEPT, '0' + chNr);
}
else
{
charOut(scopeXOffs, scopeYOffs, PAL_MOUSEPT, chDecTab1[chNr]);
charOut(scopeXOffs + 7, scopeYOffs, PAL_MOUSEPT, chDecTab2[chNr]);
}
}
}
static void redrawScope(int32_t ch)
{
int32_t i;
int32_t chansPerRow = (uint32_t)song.numChannels >> 1;
int32_t chanLookup = chansPerRow - 1;
const uint16_t *scopeLens = scopeLenTab[chanLookup];
// get x,y,len for scope according to channel (we must do it this way since 'len' can differ!)
uint16_t x = 2;
uint16_t y = 94;
uint16_t scopeLen = 0; // prevent compiler warning
for (i = 0; i < song.numChannels; i++)
{
scopeLen = scopeLens[i];
if (i == chansPerRow) // did we reach end of row?
{
// yes, go one row down
x = 2;
y += 39;
}
if (i == ch)
break;
// adjust position to next channel
x += scopeLen + 3;
}
drawFramework(x, y, scopeLen + 2, 38, FRAMEWORK_TYPE2);
// draw mute graphics if channel is muted
if (!editor.chnMode[i])
{
const uint16_t muteGfxLen = scopeMuteBMP_Widths[chanLookup];
const uint16_t muteGfxX = x + ((scopeLen - muteGfxLen) >> 1);
blitFastClipX(muteGfxX, y + 6, bmp.scopeMute+scopeMuteBMP_Offs[chanLookup], 162, scopeMuteBMP_Heights[chanLookup], muteGfxLen);
if (config.ptnChnNumbers)
drawScopeNumber(x + 1, y + 1, (uint8_t)i, true);
}
scope[ch].wasCleared = false;
}
void refreshScopes(void)
{
for (int32_t i = 0; i < MAX_CHANNELS; i++)
scope[i].wasCleared = false;
}
static void channelMode(int32_t chn)
{
int32_t i;
assert(chn < song.numChannels);
bool m = mouse.leftButtonPressed && !mouse.rightButtonPressed;
bool m2 = mouse.rightButtonPressed && mouse.leftButtonPressed;
if (m2)
{
bool test = false;
for (i = 0; i < song.numChannels; i++)
{
if (i != chn && !editor.chnMode[i])
test = true;
}
if (test)
{
for (i = 0; i < song.numChannels; i++)
editor.chnMode[i] = true;
}
else
{
for (i = 0; i < song.numChannels; i++)
editor.chnMode[i] = (i == chn);
}
}
else if (m)
{
editor.chnMode[chn] ^= 1;
}
else
{
if (editor.chnMode[chn])
{
config.multiRecChn[chn] ^= 1;
}
else
{
config.multiRecChn[chn] = true;
editor.chnMode[chn] = true;
m = true;
}
}
for (i = 0; i < song.numChannels; i++)
setChannel(i, editor.chnMode[i]);
if (m2)
{
for (i = 0; i < song.numChannels; i++)
redrawScope(i);
}
else
{
redrawScope(chn);
}
}
bool testScopesMouseDown(void)
{
int32_t i;
if (!ui.scopesShown)
return false;
if (mouse.y >= 95 && mouse.y <= 169 && mouse.x >= 3 && mouse.x <= 288)
{
if (mouse.y > 130 && mouse.y < 134)
return true;
int32_t chansPerRow = (uint32_t)song.numChannels >> 1;
const uint16_t *scopeLens = scopeLenTab[chansPerRow-1];
// find out if we clicked inside a scope
uint16_t x = 3;
for (i = 0; i < chansPerRow; i++)
{
if (mouse.x >= x && mouse.x < x+scopeLens[i])
break;
x += scopeLens[i]+3;
}
if (i == chansPerRow)
return true; // scope framework was clicked instead
int32_t chanToToggle = i;
if (mouse.y >= 134) // second row of scopes?
chanToToggle += chansPerRow; // yes, increase lookup offset
channelMode(chanToToggle);
return true;
}
return false;
}
static void scopeTrigger(int32_t ch, const sample_t *s, int32_t playOffset)
{
volatile scope_t tempState;
volatile scope_t *sc = &scope[ch];
int32_t length = s->length;
int32_t loopStart = s->loopStart;
int32_t loopLength = s->loopLength;
int32_t loopEnd = s->loopStart + s->loopLength;
uint8_t loopType = GET_LOOPTYPE(s->flags);
bool sample16Bit = !!(s->flags & SAMPLE_16BIT);
if (s->dataPtr == NULL || length < 1)
{
sc->active = false; // shut down scope (illegal parameters)
return;
}
tempState = *sc; // get copy of current scope state
if (loopLength < 1) // disable loop if loopLength is below 1
loopType = 0;
if (sample16Bit)
tempState.base16 = (const int16_t *)s->dataPtr;
else
tempState.base8 = s->dataPtr;
tempState.sample16Bit = sample16Bit;
tempState.loopType = loopType;
tempState.direction = 1; // forwards
tempState.sampleEnd = (loopType == LOOP_OFF) ? length : loopEnd;
tempState.loopStart = loopStart;
tempState.loopLength = loopLength;
tempState.position = playOffset;
tempState.positionFrac = 0;
// if position overflows (f.ex. through 9xx command), shut down scopes
if (tempState.position >= tempState.sampleEnd)
{
sc->active = false;
return;
}
tempState.active = true;
/* Update live scope now.
** In theory it -can- be written to in the middle of a cached read,
** then the read thread writes its own non-updated cached copy back and
** the trigger never happens. So far I have never seen it happen,
** so it's probably very rare. Yes, this is not good coding...
*/
*sc = tempState; // set new scope state
}
static void updateScopes(void)
{
scopesUpdatingFlag = true;
volatile scope_t *sc = scope;
for (int32_t i = 0; i < song.numChannels; i++, sc++)
{
volatile scope_t s = *sc; // get copy of current scope state
if (!s.active)
continue; // scope is not active
// scope position update
s.positionFrac += s.delta;
const uint32_t wholeSamples = (uint32_t)(s.positionFrac >> SCOPE_FRAC_BITS);
s.positionFrac &= SCOPE_FRAC_MASK;
if (s.direction == 1)
s.position += wholeSamples; // forwards
else
s.position -= wholeSamples; // backwards
// handle loop wrapping or sample end
if (s.direction == -1 && s.position < s.loopStart) // sampling backwards (definitely pingpong loop)
{
s.direction = 1; // change direction to forwards
if (s.loopLength >= 2)
s.position = s.loopStart + ((s.loopStart - s.position - 1) % s.loopLength);
else
s.position = s.loopStart;
assert(s.position >= s.loopStart && s.position < s.sampleEnd);
}
else if (s.position >= s.sampleEnd)
{
uint32_t loopOverflowVal;
if (s.loopLength >= 2)
loopOverflowVal = (s.position - s.sampleEnd) % s.loopLength;
else
loopOverflowVal = 0;
if (s.loopType == LOOP_DISABLED)
{
s.active = false;
}
else if (s.loopType == LOOP_FORWARD)
{
s.position = s.loopStart + loopOverflowVal;
assert(s.position >= s.loopStart && s.position < s.sampleEnd);
}
else // pingpong loop
{
s.direction = -1; // change direction to backwards
s.position = (s.sampleEnd - 1) - loopOverflowVal;
assert(s.position >= s.loopStart && s.position < s.sampleEnd);
}
}
assert(s.position >= 0);
*sc = s; // set new scope state
}
scopesUpdatingFlag = false;
}
void drawScopes(void)
{
scopesDisplayingFlag = true;
int32_t chansPerRow = (uint32_t)song.numChannels >> 1;
const uint16_t *scopeLens = scopeLenTab[chansPerRow-1];
uint16_t scopeXOffs = 3;
uint16_t scopeYOffs = 95;
int16_t scopeLineY = 112;
for (int32_t i = 0; i < song.numChannels; i++)
{
// if we reached the last scope on the row, go to first scope on the next row
if (i == chansPerRow)
{
scopeXOffs = 3;
scopeYOffs = 134;
scopeLineY = 151;
}
const uint16_t scopeDrawLen = scopeLens[i];
if (!editor.chnMode[i]) // scope muted (mute graphics blit()'ed elsewhere)
{
scopeXOffs += scopeDrawLen+3; // align x to next scope
continue;
}
const scope_t s = scope[i]; // cache scope to lower thread race condition issues
if (s.active && s.volume > 0 && !audio.locked)
{
// scope is active
scope[i].wasCleared = false;
// clear scope background
clearRect(scopeXOffs, scopeYOffs, scopeDrawLen, SCOPE_HEIGHT);
// draw scope
bool linedScopesFlag = !!(config.specialFlags & LINED_SCOPES);
scopeDrawRoutineTable[(linedScopesFlag * 6) + (s.sample16Bit * 3) + s.loopType](&s, scopeXOffs, scopeLineY, scopeDrawLen);
}
else
{
// scope is inactive
volatile scope_t *sc = &scope[i];
if (!sc->wasCleared)
{
// clear scope background
clearRect(scopeXOffs, scopeYOffs, scopeDrawLen, SCOPE_HEIGHT);
// draw empty line
hLine(scopeXOffs, scopeLineY, scopeDrawLen, PAL_PATTEXT);
sc->wasCleared = true;
}
}
// draw channel numbering (if enabled)
if (config.ptnChnNumbers)
drawScopeNumber(scopeXOffs, scopeYOffs, (uint8_t)i, false);
// draw rec. symbol (if enabled)
if (config.multiRecChn[i])
blit(scopeXOffs + 1, scopeYOffs + 31, bmp.scopeRec, 13, 4);
scopeXOffs += scopeDrawLen+3; // align x to next scope
}
scopesDisplayingFlag = false;
}
void drawScopeFramework(void)
{
drawFramework(0, 92, 291, 81, FRAMEWORK_TYPE1);
for (int32_t i = 0; i < song.numChannels; i++)
redrawScope(i);
}
void handleScopesFromChQueue(chSyncData_t *chSyncData, uint8_t *scopeUpdateStatus)
{
volatile scope_t *sc = scope;
syncedChannel_t *ch = chSyncData->channels;
for (int32_t i = 0; i < song.numChannels; i++, sc++, ch++)
{
const uint8_t status = scopeUpdateStatus[i];
if (status & IS_Vol)
sc->volume = ch->scopeVolume;
if (status & IS_Period)
sc->delta = ch->scopeDelta;
if (status & IS_Trigger)
{
if (instr[ch->instrNum] != NULL)
{
scopeTrigger(i, &instr[ch->instrNum]->smp[ch->smpNum], ch->smpStartPos);
// set some stuff used by Smp. Ed. for sampling position line
if (ch->instrNum == 130 || (ch->instrNum == editor.curInstr && ch->smpNum == editor.curSmp))
editor.curSmpChannel = (uint8_t)i;
lastChInstr[i].instrNum = ch->instrNum;
lastChInstr[i].smpNum = ch->smpNum;
}
else
{
// empty instrument, shut down scope
scope[i].active = false;
lastChInstr[i].instrNum = 255;
lastChInstr[i].smpNum = 255;
}
}
}
}
static int32_t SDLCALL scopeThreadFunc(void *ptr)
{
// this is needed for scope stability (confirmed)
SDL_SetThreadPriority(SDL_THREAD_PRIORITY_HIGH);
hpc_SetDurationInHz(&scopeHpc, SCOPE_HZ);
hpc_ResetCounters(&scopeHpc);
while (editor.programRunning)
{
editor.scopeThreadBusy = true;
updateScopes();
editor.scopeThreadBusy = false;
hpc_Wait(&scopeHpc);
}
(void)ptr;
return true;
}
bool initScopes(void)
{
scopeThread = SDL_CreateThread(scopeThreadFunc, NULL, NULL);
if (scopeThread == NULL)
{
showErrorMsgBox("Couldn't create channel scope thread!");
return false;
}
SDL_DetachThread(scopeThread);
return true;
}