ref: 368119aabab5bd92e9fcf5829575229263515731
parent: 70e5e62f3dbd19f0e9300fa7bba670c7ee93dcd2
author: Ethan Hugg <ehugg@cisco.com>
date: Sun Dec 8 23:56:50 EST 2013
Initial Commit
--- /dev/null
+++ b/testbin/AutoBuild_Linux.sh
@@ -1,0 +1,128 @@
+#!/bin/bash
+
+usage="this file must located in ../testbin/ based on our code structure "
+echo $usage
+
+CurDir=`pwd`
+EncoderMakeDir="../codec/build/linux/enc/"
+DecoderMakeDir="../codec/build/linux/dec/"
+VPMakeDir="../processing/build/linux/"
+
+CodecBinDir="../codec/build/linux/bin/"
+VPBinDir="../bin/linux"
+
+let "EncoderBuildFlag=1"
+let "DecoderBuildFlag=1"
+let "VPBuildFlag=1"
+MakefileLogFile="${CurDir}/CodecVPBuild.log"+
+#************************************************
+#call Encoder make file
+echo "encoder building....."
+cd ${EncoderMakeDir}+make clean >${MakefileLogFile}+make >>${MakefileLogFile}+
+cd ${CurDir}+cd ${CodecBinDir}+if [ ! -e welsenc.a ]
+then
+ let "EncoderBuildFlag=0"
+fi
+
+if [ ! -e welsenc.so ]
+then
+ let "EncoderBuildFlag=0"
+fi
+
+if [ ! -e welsenc.exe ]
+then
+ let "EncoderBuildFlag=0"
+fi
+
+if [ "$EncoderBuildFlag" -eq 1 ]
+then
+ echo "encoder build success!"
+else
+ echo "encoder build failed!"
+fi
+
+#************************************************
+#call Decoder make file
+echo "decoder building....."
+cd ${CurDir}+cd ${DecoderMakeDir}+make clean >>${MakefileLogFile}+make >>${MakefileLogFile}+
+cd ${CurDir}+cd ${CodecBinDir}+if [ ! -e welsdec.a ]
+then
+ let "DecoderBuildFlag=0"
+fi
+
+if [ ! -e welsdec.so ]
+then
+ let "DecoderBuildFlag=0"
+fi
+
+if [ ! -e welsdec.exe ]
+then
+ let "DecoderBuildFlag=0"
+fi
+
+if [ "$DecoderBuildFlag" -eq 1 ]
+then
+ echo "decoder build success!"
+else
+ echo "decoder build failed!"
+fi
+
+#************************************************
+#call VP make file
+echo "VP building....."
+cd ${CurDir}+cd ${VPMakeDir}+make clean >>${MakefileLogFile}+make >>${MakefileLogFile}+
+cd ${CurDir}+cd ${VPBinDir}+if [ ! -e libwelsvp.so ]
+then
+ let "VPBuildFlag=0"
+fi
+
+if [ "$VPBuildFlag" -eq 1 ]
+then
+ echo "VP build success!"
+else
+ echo "VP build failed!"
+fi
+
+
+#****************************
+cd ${CurDir}+rm -f *.a *.exe *.so
+
+for file in ${CodecBinDir}/*+do
+ cp ${file} ./+ echo "file ${file} under ../openh264/bin/"+done
+
+for file in ${VPBinDir}/*+do
+ cp ${file} ./+ echo "file ${file} under ../openh264/bin/"+done
+
+
+
+
+
+
+
+
+
--- /dev/null
+++ b/testbin/AutoBuild_Windows_VS2008.bat
@@ -1,0 +1,59 @@
+echo off
+SET usage="this file must located in ..\testbin\ based on our code structure "
+echo %usage%
+
+echo "Auto build of openH264 by VS2008"
+
+SET VCBUILDEXE="C:\Program Files (x86)\Microsoft Visual Studio 9.0\VC\vcpackages\vcbuild.exe"
+
+SET CurDir=%~dp0
+SET EncoderProjectDir="..\codec\build\win32\enc\"
+SET DecoderProjectDir="..\codec\build\win32\dec\"
+SET VPProjectDir="..\processing\build\win32\"
+
+SET CodecBinDir="..\codec\build\win32\bin\"
+SET VPBinDir="..\processing\bin\"
+
+SET EncoderBuildFlag=1
+SET DecoderBuildFlag=1
+SET VPBuildFlag=1
+SET MakefileLogFile="${CurDir}\CodecVPBuild.log"
+
+rem ************************************************
+rem call VP build
+echo "Welsvp Building....."
+cd %VPProjectDir%
+rem vcclean
+%VCBUILDEXE% WelsVP_2008.vcproj
+
+
+rem ************************************************
+rem call WelsEncoder build
+echo "WelsEncoder Building....."
+
+cd %CurDir%
+cd %EncoderProjectDir%
+rem vcclean
+%VCBUILDEXE% WelsEncCore.vcproj
+%VCBUILDEXE% WelsEncPlus.vcproj
+%VCBUILDEXE% encConsole.vcproj
+
+rem ************************************************
+rem call WelsDecoder build
+echo "WelsDecoder Building....."
+
+cd %CurDir%
+cd %DecoderProjectDir%
+rem vcclean
+%VCBUILDEXE% WelsDecCore.vcproj
+%VCBUILDEXE% WelsDecPlus.vcproj
+%VCBUILDEXE% decConsole.vcproj
+
+cd %CurDir%
+echo "this is the end of auto build..."
+pause
+
+rem TBD
+
+
+
--- /dev/null
+++ b/testbin/AutoBuild_Windows_VS2010.bat
@@ -1,0 +1,66 @@
+echo off
+SET usage="this file must located in ..\testbin\ based on our code structure "
+echo %usage%
+echo "Auto build of openH264 by VS2010"
+
+SET VCENVSETBAT="C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin\vcvars32.bat"
+
+Rem ************************************************
+rem reset the dev env for VS2010
+echo "reset the developing env for VS2010"
+call %VCENVSETBAT%
+
+
+SET VCMSBUILDEXE_RELEASE=MSbuild /t:Rebuild /p:Configuration=Release
+SET VCMSBUILDEXE_DEBUG=MSbuild /t:Rebuild /p:Configuration=Debug
+
+SET CurDir=%~dp0
+SET EncoderProjectDir="..\codec\build\win32\enc\"
+SET DecoderProjectDir="..\codec\build\win32\dec\"
+SET VPProjectDir="..\processing\build\win32\"
+
+SET CodecBinDir="..\codec\build\win32\bin\"
+SET VPBinDir="..\processing\bin\"
+
+SET EncoderBuildFlag=1
+SET DecoderBuildFlag=1
+SET VPBuildFlag=1
+SET MakefileLogFile="${CurDir}\CodecVPBuild.log"
+
+
+
+rem ************************************************
+rem call WelsEncoder build
+echo "WelsEncoder Building....."
+
+cd %CurDir%
+cd %EncoderProjectDir%
+echo current directory is %EncoderProjectDir%
+rem vcclean
+
+echo %VCMSBUILDEXE_RELEASE% WelsEncoder_2010.sln
+%VCMSBUILDEXE_RELEASE% WelsEncoder_2010.sln
+%VCMSBUILDEXE_DEBUG% WelsEncoder_2010.sln
+
+rem ************************************************
+rem call WelsDecoder build
+echo "WelsDecoder Building....."
+
+cd %CurDir%
+cd %DecoderProjectDir%
+echo current directory is %DecoderProjectDir%
+rem vcclean
+
+echo %VCMSBUILDEXE_RELEASE% WelsDecoder_2010.sln
+
+%VCMSBUILDEXE_RELEASE% WelsDecoder_2010.sln
+%VCMSBUILDEXE_DEBUG% WelsDecoder_2010.sln
+
+cd %CurDir%
+echo "this is the end of auto build..."
+pause
+
+rem TBD
+
+
+
--- /dev/null
+++ b/testbin/AutoBuild_Windows_VS2012.bat
@@ -1,0 +1,66 @@
+echo off
+SET usage="this file must located in ..\testbin\ based on our code structure "
+echo %usage%
+echo "Auto build of openH264 by VS2012"
+
+SET VCENVSETBAT="C:\Program Files (x86)\Microsoft Visual Studio 11.0\VC\bin\vcvars32.bat"
+
+Rem ************************************************
+rem reset the dev env for VS2012
+echo "reset the developing env for VS2012"
+call %VCENVSETBAT%
+
+
+SET VCMSBUILDEXE_RELEASE=MSbuild /t:Rebuild /p:Configuration=Release
+SET VCMSBUILDEXE_DEBUG=MSbuild /t:Rebuild /p:Configuration=Debug
+
+SET CurDir=%~dp0
+SET EncoderProjectDir="..\codec\build\win32\enc\"
+SET DecoderProjectDir="..\codec\build\win32\dec\"
+SET VPProjectDir="..\processing\build\win32\"
+
+SET CodecBinDir="..\codec\build\win32\bin\"
+SET VPBinDir="..\processing\bin\"
+
+SET EncoderBuildFlag=1
+SET DecoderBuildFlag=1
+SET VPBuildFlag=1
+SET MakefileLogFile="${CurDir}\CodecVPBuild.log"
+
+
+
+rem ************************************************
+rem call WelsEncoder build
+echo "WelsEncoder Building....."
+
+cd %CurDir%
+cd %EncoderProjectDir%
+echo current directory is %EncoderProjectDir%
+rem vcclean
+
+echo %VCMSBUILDEXE_RELEASE% WelsEncoder_2012.sln
+%VCMSBUILDEXE_RELEASE% WelsEncoder_2012.sln
+%VCMSBUILDEXE_DEBUG% WelsEncoder_2012.sln
+
+rem ************************************************
+rem call WelsDecoder build
+echo "WelsDecoder Building....."
+
+cd %CurDir%
+cd %DecoderProjectDir%
+echo current directory is %DecoderProjectDir%
+rem vcclean
+
+echo %VCMSBUILDEXE_RELEASE% WelsDecoder_2012.sln
+
+%VCMSBUILDEXE_RELEASE% WelsDecoder_2012.sln
+%VCMSBUILDEXE_DEBUG% WelsDecoder_2012.sln
+
+cd %CurDir%
+echo "this is the end of auto build..."
+pause
+
+rem TBD
+
+
+
--- /dev/null
+++ b/testbin/AutoClean_Linux.sh
@@ -1,0 +1,53 @@
+#!/bin/bash
+
+usage="this file must located in ../testbin/ based on our code structure "
+echo $usage
+
+CurDir=`pwd`
+EncoderMakeDir="../codec/build/linux/enc/"
+DecoderMakeDir="../codec/build/linux/dec/"
+VPMakeDir="../processing/build/linux/"
+
+CodecBinDir="../codec/build/linux/bin/"
+VPBinDir="../bin/linux"
+
+let "EncoderBuildFlag=1"
+let "DecoderBuildFlag=1"
+let "VPBuildFlag=1"
+MakefileLogFile="${CurDir}/CodecVPBuild.log"+
+#************************************************
+#call Encoder make file
+echo "encoder cleanning....."
+cd ${EncoderMakeDir}+make clean >${MakefileLogFile}+#make >>${MakefileLogFile}+
+
+
+#************************************************
+#call Decoder make file
+echo "decoder cleanning....."
+cd ${CurDir}+cd ${DecoderMakeDir}+make clean >>${MakefileLogFile}+#make >>${MakefileLogFile}+
+
+
+#************************************************
+#call VP make file
+echo "VP cleanning....."
+cd ${CurDir}+cd ${VPMakeDir}+make clean >>${MakefileLogFile}+#make >>${MakefileLogFile}+
+cd ${CurDir}+
+rm -f *.exe *.so *.a *.log
+rm -fr ../bin # remove the bin directory
+
+
+
+
--- /dev/null
+++ b/testbin/CmdLineExample.sh
@@ -1,0 +1,6 @@
+chmod 777 ../bin/linux/welsenc.exe
+../bin/linux/welsenc.exe welsenc_vd_1d.cfg
+../bin/linux/welsenc.exe welsenc_vd_rc.cfg
+
+../bin/linux/welsdec.exe test_vd_1d.264 test_vd_1d.yuv
+../bin/linux/welsdec.exe test_vd_1d.264 test_vd_rc.yuv
--- /dev/null
+++ b/testbin/CmdLineReadMe
@@ -1,0 +1,20 @@
+/* Instant Runable Configurations */
+//for encoder configure files
+welsenc_vd_1d.cfg
+welsenc_vd_rc.cfg
+
+//the actual generated decoder EXE files are in folder ../bin/win32/release/ with Release build
+//user may copy "decConsole.exe" and "welsdec.dll" into ../bin
+//Now assume the generated EXE files are in folder ../bin
+
+Example Command Line for encoding in Windows:
+../bin/encConsole.exe welsenc_vd_1d.cfg
+../bin/encConsole.exe welsenc_vd_rc.cfg
+
+Example Command Line for decoding in Windows
+../bin/decConsole.exe welsenc_vd_1d.264 welsenc_vd_1d.yuv
+../bin/decConsole.exe welsenc_vd_rc.264 welsenc_vd_rc.yuv
+
+Example shell script for Linux for encoder & decoder:
+CmdLineExample.sh
+
--- /dev/null
+++ b/testbin/layer2.cfg
@@ -1,0 +1,39 @@
+# Layer Configuration File
+
+
+#============================== INPUT / OUTPUT ==============================
+SourceWidth 640 # Input frame width
+SourceHeight 384 # Input frame height
+FrameRateIn 24 # Input frame rate [Hz]
+FrameRateOut 24 # Output frame rate [Hz]
+InputFile CiscoVT2people_640x384_24fps.yuv # Input file
+ReconFile rec_layer2.yuv # Reconstructed file
+
+#============================== CODING ==============================
+ProfileIdc 66 # value of profile_idc (or 0 for auto detection)
+
+InitialQP 24 # Quantization parameters for base quality layer
+#================================ RATE CONTROL ===============================
+SpatialBitrate 600 # Unit: kbps, controled by DisableRC also
+#============================== MultiSlice Slice Argument ==============================
+# for S/M Slice(s) mode settings
+SliceMode 0 # 0: sigle slice mode; >0: multiple slices mode, see below;
+SliceSize 1500
+SliceNum 1 # multiple slices number specified
+
+SlicesAssign0 960 # count number of MBs in slice #0
+SlicesAssign1 0 # count number of MBs in slice #1
+SlicesAssign2 0 # count number of MBs in slice #2
+SlicesAssign3 0 # count number of MBs in slice #3 -- seting here is for better testing
+SlicesAssign4 0 # count number of MBs in slice #4
+SlicesAssign5 0 # count number of MBs in slice #5
+SlicesAssign6 0 # count number of MBs in slice #6
+SlicesAssign7 0 # count number of MBs in slice #7
+
+### DESIGN OF SLICE MODE ####
+# 0 SM_SINGLE_SLICE | SliceNum==1
+# 1 SM_FIXEDSLCNUM_SLICE | according to SliceNum | Enabled dynamic slicing for multi-thread
+# 2 SM_RASTER_SLICE | according to SlicesAssign | Need input of MB numbers each slice. In addition, if other constraint in slice_argument is presented, need to follow the constraints. Typically if MB num and slice size are both constrained, re-encoding may be involved.
+# 3 SM_ROWMB_SLICE | according to PictureMBHeight | Typical of single row of mbs each slice?+ slice size constraint which including re-encoding
+# 4 SM_DYN_SLICE | according to SliceSize | Dynamic slicing (have no idea about slice_nums until encoding current frame)
+
--- /dev/null
+++ b/testbin/layer2_vd.cfg
@@ -1,0 +1,39 @@
+# Layer Configuration File
+
+
+#============================== INPUT / OUTPUT ==============================
+SourceWidth 640 # Input frame width
+SourceHeight 384 # Input frame height
+FrameRateIn 24 # Input frame rate [Hz]
+FrameRateOut 24 # Output frame rate [Hz]
+InputFile CiscoVT2people_640x384_24fps.yuv # Input file
+ReconFile rec_layer2.yuv # Reconstructed file
+
+#============================== CODING ==============================
+ProfileIdc 66 # value of profile_idc (or 0 for auto detection)
+
+InitialQP 24 # Quantization parameters for base quality layer
+#================================ RATE CONTROL ===============================
+SpatialBitrate 600 # Unit: kbps, controled by DisableRC also
+#============================== MultiSlice Slice Argument ==============================
+# for S/M Slice(s) mode settings
+SliceMode 0 # 0: sigle slice mode; >0: multiple slices mode, see below;
+SliceSize 1500
+SliceNum 1 # multiple slices number specified
+
+SlicesAssign0 960 # count number of MBs in slice #0
+SlicesAssign1 0 # count number of MBs in slice #1
+SlicesAssign2 0 # count number of MBs in slice #2
+SlicesAssign3 0 # count number of MBs in slice #3 -- seting here is for better testing
+SlicesAssign4 0 # count number of MBs in slice #4
+SlicesAssign5 0 # count number of MBs in slice #5
+SlicesAssign6 0 # count number of MBs in slice #6
+SlicesAssign7 0 # count number of MBs in slice #7
+
+### DESIGN OF SLICE MODE, 100804, Sijia ####
+# 0 SM_SINGLE_SLICE | SliceNum==1
+# 1 SM_FIXEDSLCNUM_SLICE | according to SliceNum | Enabled dynamic slicing for multi-thread
+# 2 SM_RASTER_SLICE | according to SlicesAssign | Need input of MB numbers each slice. In addition, if other constraint in slice_argument is presented, need to follow the constraints. Typically if MB num and slice size are both constrained, re-encoding may be involved.
+# 3 SM_ROWMB_SLICE | according to PictureMBHeight | Specially for TP. Typical of single row of mbs each slice?+ slice size constraint which including re-encoding
+# 4 SM_DYN_SLICE | according to SliceSize | Dynamic slicing (have no idea about slice_nums until encoding current frame)
+
--- /dev/null
+++ b/testbin/layer2_vd_rc.cfg
@@ -1,0 +1,39 @@
+# Layer Configuration File
+
+
+#============================== INPUT / OUTPUT ==============================
+SourceWidth 640 # Input frame width
+SourceHeight 384 # Input frame height
+FrameRateIn 24 # Input frame rate [Hz]
+FrameRateOut 24 # Output frame rate [Hz]
+InputFile CiscoVT2people_640x384_24fps.yuv # Input file
+ReconFile rec_layer2.yuv # Reconstructed file
+
+#============================== CODING ==============================
+ProfileIdc 66 # value of profile_idc (or 0 for auto detection)
+
+InitialQP 24 # Quantization parameters for base quality layer
+#================================ RATE CONTROL ===============================
+SpatialBitrate 600 # Unit: kbps, controled by DisableRC also
+#============================== MultiSlice Slice Argument ==============================
+# for S/M Slice(s) mode settings
+SliceMode 0 # 0: sigle slice mode; >0: multiple slices mode, see below;
+SliceSize 1500
+SliceNum 1 # multiple slices number specified
+
+SlicesAssign0 960 # count number of MBs in slice #0
+SlicesAssign1 0 # count number of MBs in slice #1
+SlicesAssign2 0 # count number of MBs in slice #2
+SlicesAssign3 0 # count number of MBs in slice #3 -- seting here is for better testing
+SlicesAssign4 0 # count number of MBs in slice #4
+SlicesAssign5 0 # count number of MBs in slice #5
+SlicesAssign6 0 # count number of MBs in slice #6
+SlicesAssign7 0 # count number of MBs in slice #7
+
+### DESIGN OF SLICE MODE, 100804, Sijia ####
+# 0 SM_SINGLE_SLICE | SliceNum==1
+# 1 SM_FIXEDSLCNUM_SLICE | according to SliceNum | Enabled dynamic slicing for multi-thread
+# 2 SM_RASTER_SLICE | according to SlicesAssign | Need input of MB numbers each slice. In addition, if other constraint in slice_argument is presented, need to follow the constraints. Typically if MB num and slice size are both constrained, re-encoding may be involved.
+# 3 SM_ROWMB_SLICE | according to PictureMBHeight | Specially for TP. Typical of single row of mbs each slice?+ slice size constraint which including re-encoding
+# 4 SM_DYN_SLICE | according to SliceSize | Dynamic slicing (have no idea about slice_nums until encoding current frame)
+
--- /dev/null
+++ b/testbin/welsenc.cfg
@@ -1,0 +1,63 @@
+# Cisco Scalable H.264/AVC Extension Encoder Configuration File
+
+#============================== GENERAL ==============================
+OutputFile test.264 # Bitstream file
+MaxFrameRate 30 # Maximum frame rate [Hz]
+FramesToBeEncoded -1 # Number of frames (at input frame rate)
+
+GOPSize 4 # GOP Size (at maximum frame rate), 16
+IntraPeriod 0 # Intra Period ( multipler of GoP size or -1)
+EnableSpsPpsIDAddition 1
+
+EnableFrameCropping 1 # enable frame cropping flag
+
+#============================== LOOP FILTER ==============================
+LoopFilterDisableIDC 0 # Loop filter idc (0: on, 1: off,
+ # 2: on except for slice boundaries,
+ # 3: two stage. slice boundries on in second stage
+ # 4: Luma on but Chroma off (w.r.t. idc=0)
+ # 5: Luma on except on slice boundaries, but Chroma off in enh. layer (w.r.t. idc=2)
+ # 6: Luma on in two stage. slice boundries on in second stage, but Chroma off (w.r.t. idc=3)
+LoopFilterAlphaC0Offset 0 # AlphaOffset(-6..+6): valid range
+LoopFilterBetaOffset 0 # BetaOffset (-6..+6): valid range
+
+InterLayerLoopFilterDisableIDC 0 # filter idc for inter-layer deblocking (0: on, 1: off,
+ # 2: on except for slice boundaries,
+ # 3: two stage. slice boundries on in second stage
+ # 4: Luma on but Chroma off in enh. layer (w.r.t. idc=0)
+ # 5: Luma on except on slice boundaries, but Chroma off in enh. layer (w.r.t. idc=2)
+ # 6: Luma on in two stage. slice boundries on in second stage, but Chroma off (w.r.t. idc=3)
+InterLayerLoopFilterAlphaC0Offset 0 # AlphaOffset for inter-layer deblocking
+InterLayerLoopFilterBetaOffset 0 # BetaOffset for inter-layer deblocking
+
+#============================== SOFTWARE IMPLEMENTATION ==============================
+MultipleThreadIdc 1 # 0: auto(dynamic imp. internal encoder); 1: multiple threads imp. disabled; > 1: count number of threads;
+
+#============================== RATE CONTROL ==============================
+EnableRC 1 # ENABLE RC
+TargetBitrate 5000 # Unit: kbps, controled by EnableRC also
+
+#============================== DENOISE CONTROL ==============================
+EnableDenoise 0 # Enable Denoise (1: enable, 0: disable)
+
+#============================== SCENE CHANGE DETECTION CONTROL =======================
+EnableSceneChangeDetection 1 # Enable Scene Change Detection (1: enable, 0: disable)
+
+#============================== BACKGROUND DETECTION CONTROL ==============================
+EnableBackgroundDetection 1 # BGD control(1: enable, 0: disable)
+
+#============================== ADAPTIVE QUANTIZATION CONTROL =======================
+EnableAdaptiveQuantization 1 # Enable Adaptive Quantization (1: enable, 0: disable)
+
+#============================== LONG TERM REFERENCE CONTROL ==============================
+EnableLongTermReference 0 # Enable Long Term Reference (1: enable, 0: disable)
+LtrMarkPeriod 30 # Long Term Reference Marking Period
+
+#============================== LAYER DEFINITION ==============================
+PrefixNALAddingCtrl 0 # Control flag of adding prefix unit (0: off, 1: on)
+ # It shall always be on in SVC contexts (i.e. when there are CGS/MGS/spatial enhancement layers)
+ # Can be disabled when no inter spatial layer prediction in case of its value as 0
+NumLayers 1 # Number of layers
+//LayerCfg layer0.cfg # Layer 0 configuration file
+//LayerCfg layer1.cfg # Layer 1 configuration file
+LayerCfg layer2.cfg # Layer 2 configuration file
--- /dev/null
+++ b/testbin/welsenc_vd_1d.cfg
@@ -1,0 +1,63 @@
+# Cisco Scalable H.264/AVC Extension Encoder Configuration File
+
+#============================== GENERAL ==============================
+OutputFile test_vd_1d.264 # Bitstream file
+MaxFrameRate 30 # Maximum frame rate [Hz]
+FramesToBeEncoded -1 # Number of frames (at input frame rate)
+
+GOPSize 4 # GOP Size (at maximum frame rate), 16
+IntraPeriod 0 # Intra Period ( multipler of GoP size or -1)
+EnableSpsPpsIDAddition 1
+
+EnableFrameCropping 1 # enable frame cropping flag
+
+#============================== LOOP FILTER ==============================
+LoopFilterDisableIDC 0 # Loop filter idc (0: on, 1: off,
+ # 2: on except for slice boundaries,
+ # 3: two stage. slice boundries on in second stage
+ # 4: Luma on but Chroma off (w.r.t. idc=0)
+ # 5: Luma on except on slice boundaries, but Chroma off in enh. layer (w.r.t. idc=2)
+ # 6: Luma on in two stage. slice boundries on in second stage, but Chroma off (w.r.t. idc=3)
+LoopFilterAlphaC0Offset 0 # AlphaOffset(-6..+6): valid range
+LoopFilterBetaOffset 0 # BetaOffset (-6..+6): valid range
+
+InterLayerLoopFilterDisableIDC 0 # filter idc for inter-layer deblocking (0: on, 1: off,
+ # 2: on except for slice boundaries,
+ # 3: two stage. slice boundries on in second stage
+ # 4: Luma on but Chroma off in enh. layer (w.r.t. idc=0)
+ # 5: Luma on except on slice boundaries, but Chroma off in enh. layer (w.r.t. idc=2)
+ # 6: Luma on in two stage. slice boundries on in second stage, but Chroma off (w.r.t. idc=3)
+InterLayerLoopFilterAlphaC0Offset 0 # AlphaOffset for inter-layer deblocking
+InterLayerLoopFilterBetaOffset 0 # BetaOffset for inter-layer deblocking
+
+#============================== SOFTWARE IMPLEMENTATION ==============================
+MultipleThreadIdc 1 # 0: auto(dynamic imp. internal encoder); 1: multiple threads imp. disabled; > 1: count number of threads;
+
+#============================== RATE CONTROL ==============================
+EnableRC 0 # ENABLE RC
+TargetBitrate 5000 # Unit: kbps, controled by EnableRC also
+
+#============================== DENOISE CONTROL ==============================
+EnableDenoise 0 # Enable Denoise (1: enable, 0: disable)
+
+#============================== SCENE CHANGE DETECTION CONTROL =======================
+EnableSceneChangeDetection 1 # Enable Scene Change Detection (1: enable, 0: disable)
+
+#============================== BACKGROUND DETECTION CONTROL ==============================
+EnableBackgroundDetection 1 # BGD control(1: enable, 0: disable)
+
+#============================== ADAPTIVE QUANTIZATION CONTROL =======================
+EnableAdaptiveQuantization 0 # Enable Adaptive Quantization (1: enable, 0: disable)
+
+#============================== LONG TERM REFERENCE CONTROL ==============================
+EnableLongTermReference 1 # Enable Long Term Reference (1: enable, 0: disable)
+LtrMarkPeriod 30 # Long Term Reference Marking Period
+
+#============================== LAYER DEFINITION ==============================
+PrefixNALAddingCtrl 0 # Control flag of adding prefix unit (0: off, 1: on)
+ # It shall always be on in SVC contexts (i.e. when there are CGS/MGS/spatial enhancement layers)
+ # Can be disabled when no inter spatial layer prediction in case of its value as 0
+NumLayers 1 # Number of layers
+//LayerCfg layer0_vd.cfg # Layer 0 configuration file
+//LayerCfg layer1_vd.cfg # Layer 1 configuration file
+LayerCfg layer2_vd.cfg # Layer 2 configuration file
--- /dev/null
+++ b/testbin/welsenc_vd_rc.cfg
@@ -1,0 +1,63 @@
+# Cisco Scalable H.264/AVC Extension Encoder Configuration File
+
+#============================== GENERAL ==============================
+OutputFile test_vd_rc.264 # Bitstream file
+MaxFrameRate 30 # Maximum frame rate [Hz]
+FramesToBeEncoded -1 # Number of frames (at input frame rate), -1
+
+GOPSize 8 # GOP Size (at maximum frame rate), 16
+IntraPeriod 0 # Intra Period ( multipler of GoP size or -1)
+EnableSpsPpsIDAddition 1
+
+EnableFrameCropping 1 # enable frame cropping flag
+
+#============================== LOOP FILTER ==============================
+LoopFilterDisableIDC 0 # Loop filter idc (0: on, 1: off,
+ # 2: on except for slice boundaries,
+ # 3: two stage. slice boundries on in second stage
+ # 4: Luma on but Chroma off (w.r.t. idc=0)
+ # 5: Luma on except on slice boundaries, but Chroma off in enh. layer (w.r.t. idc=2)
+ # 6: Luma on in two stage. slice boundries on in second stage, but Chroma off (w.r.t. idc=3)
+LoopFilterAlphaC0Offset 0 # AlphaOffset(-6..+6): valid range
+LoopFilterBetaOffset 0 # BetaOffset (-6..+6): valid range
+
+InterLayerLoopFilterDisableIDC 0 # filter idc for inter-layer deblocking (0: on, 1: off,
+ # 2: on except for slice boundaries,
+ # 3: two stage. slice boundries on in second stage
+ # 4: Luma on but Chroma off in enh. layer (w.r.t. idc=0)
+ # 5: Luma on except on slice boundaries, but Chroma off in enh. layer (w.r.t. idc=2)
+ # 6: Luma on in two stage. slice boundries on in second stage, but Chroma off (w.r.t. idc=3)
+InterLayerLoopFilterAlphaC0Offset 0 # AlphaOffset for inter-layer deblocking
+InterLayerLoopFilterBetaOffset 0 # BetaOffset for inter-layer deblocking
+
+#============================== SOFTWARE IMPLEMENTATION ==============================
+MultipleThreadIdc 1 # 0: auto(dynamic imp. internal encoder); 1: multiple threads imp. disabled; > 1: count number of threads;
+
+#============================== RATE CONTROL ==============================
+EnableRC 1 # ENABLE RC
+TargetBitrate 600 # Unit: kbps, controled by EnableRC also
+
+#============================== DENOISE CONTROL ==============================
+EnableDenoise 1 # Enable Denoise (1: enable, 0: disable)
+
+#============================== SCENE CHANGE DETECTION CONTROL =======================
+EnableSceneChangeDetection 1 # Enable Scene Change Detection (1: enable, 0: disable)
+
+#============================== BACKGROUND DETECTION CONTROL ==============================
+EnableBackgroundDetection 1 # BGD control(1: enable, 0: disable)
+
+#============================== ADAPTIVE QUANTIZATION CONTROL =======================
+EnableAdaptiveQuantization 1 # Enable Adaptive Quantization (1: enable, 0: disable)
+
+#============================== LONG TERM REFERENCE CONTROL ==============================
+EnableLongTermReference 1 # Enable Long Term Reference (1: enable, 0: disable)
+LtrMarkPeriod 30 # Long Term Reference Marking Period
+
+#============================== LAYER DEFINITION ==============================
+PrefixNALAddingCtrl 0 # Control flag of adding prefix unit (0: off, 1: on)
+ # It shall always be on in SVC contexts (i.e. when there are CGS/MGS/spatial enhancement layers)
+ # Can be disabled when no inter spatial layer prediction in case of its value as 0
+NumLayers 1 # Number of layers
+//LayerCfg layer0_vd.cfg # Layer 0 configuration file
+//LayerCfg layer1_vd.cfg # Layer 1 configuration file
+LayerCfg layer2_vd_rc.cfg # Layer 2 configuration file