ref: d6839757dffdf592ae300726a64e0f3199a9cd56
dir: /libfaad/sbr_dec.c/
/*
** FAAD - Freeware Advanced Audio Decoder
** Copyright (C) 2002 M. Bakker
**
** This program is free software; you can redistribute it and/or modify
** it under the terms of the GNU General Public License as published by
** the Free Software Foundation; either version 2 of the License, or
** (at your option) any later version.
**
** This program is distributed in the hope that it will be useful,
** but WITHOUT ANY WARRANTY; without even the implied warranty of
** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
** GNU General Public License for more details.
**
** You should have received a copy of the GNU General Public License
** along with this program; if not, write to the Free Software
** Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
**
** $Id: sbr_dec.c,v 1.3 2002/04/23 21:08:26 menno Exp $
**/
/*
SBR Decoder overview:
To achieve a synchronized output signal, the following steps have to be
acknowledged in the decoder:
- The bitstream parser divides the bitstream into two parts; the AAC
core coder part and the SBR part.
- The SBR bitstream part is fed to the bitstream de-multiplexer followed
by de-quantization The raw data is Huffman decoded.
- The AAC bitstream part is fed to the AAC core decoder, where the
bitstream data of the current frame is decoded, yielding a time domain
audio signal block of 1024 samples. The block length could easily be
adapted to other sizes e.g. 960.
- The core coder audio block is fed to the analysis QMF bank using a
delay of 1312 samples.
- The analysis QMF bank performs the filtering of the delayed core coder
audio signal. The output from the filtering is stored in the matrix
Xlow. The output from the analysis QMF bank is delayed tHFGen subband
samples, before being fed to the synthesis QMF bank. To achieve
synchronization tHFGen = 32, i.e. the value must equal the number of
subband samples corresponding to one frame.
- The HF generator calculates XHigh given the matrix XLow. The process
is guided by the SBR data contained in the current frame.
- The envelope adjuster calculates the matrix Y given the matrix XHigh
and the SBR envelope data, extracted from the SBR bitstream. To
achieve synchronization, tHFAdj has to be set to tHFAdj = 0, i.e. the
envelope adjuster operates on data delayed tHFGen subband samples.
- The synthesis QMF bank operates on the delayed output from the analysis
QMF bank and the output from the envelope adjuster.
*/
#include "common.h"
#ifdef SBR
#include "sbr_syntax.h"
#include "sbr_qmf.h"
#endif