ref: a617bf31cb29614eae92649034696100726ba87d
dir: /Makefile/
#!/usr/bin/make -f # -*- makefile -*- # # This makefile contains simple rules to prepare, compile, test, and install # aubio. Try one of the following rules: # # $ make configure # $ make build # $ make install # $ make test_python WAFCMD=python waf #WAFOPTS:= # turn on verbose mode WAFOPTS += --verbose # build wafopts WAFOPTS += --destdir $(DESTDIR) # multiple jobs WAFOPTS += --jobs 4 # if HAVE_AUBIO_DOUBLE is defined, pass --enable-double to waf # python/lib/moresetuptools.py also checks for HAVE_AUBIO_DOUBLE WAFOPTS += $(shell [ -z $(HAVE_AUBIO_DOUBLE) ] || echo --enable-double ) PIPOPTS += --verbose DESTDIR:=$(PWD)/build/dist PYDESTDIR:=$(PWD)/build/pydist # default install locations PREFIX?=/usr/local EXEC_PREFIX?=$(PREFIX) LIBDIR?=$(PREFIX)/lib INCLUDEDIR?=$(PREFIX)/include DATAROOTDIR?=$(PREFIX)/share MANDIR?=$(DATAROOTDIR)/man # default nose2 command NOSE2?=nose2 -N 4 --verbose SOX=sox TESTSOUNDS := python/tests/sounds LCOVOPTS += --rc lcov_branch_coverage=1 all: build checkwaf: @[ -f waf ] || make getwaf getwaf: ./scripts/get_waf.sh expandwaf: getwaf [ -d wafilb ] || rm -fr waflib $(WAFCMD) --help > /dev/null mv .waf*/waflib . && rm -fr .waf* sed '/^#==>$$/,$$d' waf > waf2 && mv waf2 waf chmod +x waf && chmod -R go-w waflib cleanwaf: rm -rf waf waflib .waf* configure: checkwaf $(WAFCMD) configure $(WAFOPTS) build: configure $(WAFCMD) build $(WAFOPTS) install: # install $(WAFCMD) install $(WAFOPTS) list_installed: find $(DESTDIR) -ls | sed 's|$(DESTDIR)|/«destdir»|' list_installed_python: pip show -f aubio list_all_installed: list_installed list_installed_python uninstall: # uninstall $(WAFCMD) uninstall $(WAFOPTS) delete_install: rm -rf $(PWD)/dist/test build_python: # build python-aubio, using locally built libaubio if found python ./setup.py build build_python_extlib: # build python-aubio using (locally) installed libaubio [ -f $(DESTDIR)/$(INCLUDEDIR)/aubio/aubio.h ] [ -d $(DESTDIR)/$(LIBDIR) ] [ -f $(DESTDIR)/$(LIBDIR)/pkgconfig/aubio.pc ] PKG_CONFIG_PATH=$(DESTDIR)/$(LIBDIR)/pkgconfig \ CFLAGS="-I$(DESTDIR)/$(INCLUDEDIR)" \ LDFLAGS="-L$(DESTDIR)/$(LIBDIR)" \ make build_python deps_python: # install or upgrade python requirements pip install $(PIPOPTS) --requirement requirements.txt # use pip or distutils? install_python: install_python_with_pip uninstall_python: uninstall_python_with_pip #install_python: install_python_with_distutils #uninstall_python: uninstall_python_with_distutils install_python_with_pip: # install package pip install $(PIPOPTS) . uninstall_python_with_pip: # uninstall package ( pip show aubio | grep -l aubio > /dev/null ) && \ pip uninstall -y -v aubio || echo "info: aubio package is not installed" install_python_with_distutils: ./setup.py install $(PIPOPTS) $(DISTUTILSOPTS) uninstall_python_with_distutils: #./setup.py uninstall [ -d $(PYDESTDIR)/$(LIBDIR) ] && echo Warning: did not clean $(PYDESTDIR)/$(LIBDIR) || true force_uninstall_python: # ignore failure if not installed -make uninstall_python local_dylib: # DYLD_LIBRARY_PATH is no more on mac os # create links from ~/lib/lib* to build/src/lib* [ -f $(PWD)/build/src/libaubio.[0-9].dylib ] && ( mkdir -p ~/lib && cp -prv build/src/libaubio.[0-9].dylib ~/lib ) || true test_python: export LD_LIBRARY_PATH=$(DESTDIR)/$(LIBDIR) test_python: export PYTHONPATH=$(PYDESTDIR)/$(LIBDIR) test_python: local_dylib # run test with installed package # ./python/tests/run_all_tests --verbose # run with nose2, multiple processes $(NOSE2) clean_python: ./setup.py clean check_clean_python: # check cleaning a second time works make clean_python make clean_python clean: checkwaf # optionnaly clean before build -$(WAFCMD) clean # remove possible left overs -rm -rf doc/_build check_clean: # check cleaning after build works $(WAFCMD) clean # check cleaning a second time works $(WAFCMD) clean distclean: $(WAFCMD) distclean -rm -rf doc/_build/ -rm -rf doc/web/ check_distclean: make distclean distcheck: checkwaf $(WAFCMD) distcheck $(WAFOPTS) help: $(WAFCMD) --help create_test_sounds: -[ -z `which $(SOX)` ] && ( echo $(SOX) could not be found) || true -mkdir -p $(TESTSOUNDS) -$(SOX) -r 44100 -b 16 -n "$(TESTSOUNDS)/44100Hz_1f_silence.wav" trim 0 1s -$(SOX) -r 22050 -b 16 -n "$(TESTSOUNDS)/22050Hz_5s_brownnoise.wav" synth 5 brownnoise vol 0.9 -$(SOX) -r 32000 -b 16 -n "$(TESTSOUNDS)/32000Hz_127f_sine440.wav" synth 127s sine 440 vol 0.9 -$(SOX) -r 8000 -b 16 -n "$(TESTSOUNDS)/8000Hz_30s_silence.wav" trim 0 30 -$(SOX) -r 48000 -b 32 -n "$(TESTSOUNDS)/48000Hz_60s_sweep.wav" synth 60 sine 100-20000 vol 0.9 -$(SOX) -r 44100 -b 16 -n "$(TESTSOUNDS)/44100Hz_44100f_sine441.wav" synth 44100s sine 441 vol 0.9 -$(SOX) -r 44100 -b 16 -n "$(TESTSOUNDS)/44100Hz_100f_sine441.wav" synth 100s sine 441 vol 0.9 # build only libaubio, no python-aubio test_lib_only: clean distclean configure build install list_installed # additionally, clean after a fresh build test_lib_only_clean: test_lib_only uninstall check_clean check_distclean # build libaubio, build and test python-aubio against it test_lib_python: force_uninstall_python deps_python \ clean_python clean distclean \ configure build build_python \ install install_python \ test_python \ list_all_installed test_lib_python_clean: test_lib_python \ uninstall_python uninstall \ check_clean_python \ check_clean \ check_distclean # build libaubio, install it, build python-aubio against it test_lib_install_python: force_uninstall_python deps_python \ clean_python distclean \ configure build \ install \ build_python_extlib \ install_python \ test_python \ list_all_installed test_lib_install_python_clean: test_lib_install_python \ uninstall_python \ delete_install \ check_clean_python \ check_distclean # build a python-aubio that includes libaubio test_python_only: force_uninstall_python deps_python \ clean_python clean distclean \ build_python \ install_python \ test_python \ list_installed_python test_python_only_clean: test_python_only \ uninstall_python \ check_clean_python coverage_cycle: coverage_zero_counters coverage_report coverage_zero_counters: lcov --zerocounters --directory . coverage: export CFLAGS=--coverage coverage: export LDFLAGS=--coverage coverage: export PYTHONPATH=$(PWD)/python/lib coverage: export LD_LIBRARY_PATH=$(PWD)/build/src coverage: force_uninstall_python deps_python \ clean_python clean distclean build local_dylib # capture coverage after running c tests lcov $(LCOVOPTS) --capture --no-external --directory . \ --output-file build/coverage_lib.info # build and test python pip install -v -e . # run tests, with python coverage coverage run `which nose2` # capture coverage again lcov $(LCOVOPTS) --capture --no-external --directory . \ --output-file build/coverage_python.info # merge both coverage info files lcov $(LCOVOPTS) -a build/coverage_python.info -a build/coverage_lib.info \ --output-file build/coverage.info # remove tests lcov $(LCOVOPTS) --remove build/coverage.info '*/ooura_fft8g*' \ --output-file build/coverage_lib.info # make sure we don't build the doc, which builds a temporary python module coverage_report: export WAFOPTS += --disable-docs coverage_report: coverage # generate report with lcov's genhtml genhtml build/coverage_lib.info --output-directory build/coverage_c \ --branch-coverage --highlight --legend # generate python report with coverage python package coverage report coverage html -d build/coverage_python # show links to generated reports for i in $$(ls build/coverage_*/index.html); do echo file://$(PWD)/$$i; done sphinx: configure $(WAFCMD) sphinx $(WAFOPTS) doxygen: configure $(WAFCMD) doxygen $(WAFOPTS) manpages: configure $(WAFCMD) manpages $(WAFOPTS) html: doxygen sphinx docs: html manpages dist: distclean expandwaf $(WAFCMD) dist