ref: 60ecd07e6d3f5786c8723dc9172c35d580fdadc8
dir: /man/3/logfs/
.TH LOGFS 3 .SH NAME logfs \- log-structured file system for flash devices .SH SYNOPSIS .B bind -b '#ʟ' /dev .PP .B /dev/logfsctl .br .B /dev/logfsusers .br .BI /dev/logfs name .br .BI /dev/logfs name boot .PP .B echo fsys .I name .B config .I flash-device .B "> /dev/logfsctl" .br .B echo fsys .I name .B format .I boot-area-size .B "> /dev/logfsctl" .br .B echo fsys .I name .B open .B "> /dev/logfsctl" .br .BI "mount -Ac /dev/logfs" name .I dir .SH DESCRIPTION .I Logfs is a driver level implementation of the Inferno log structured filesystem, a file system designed with modern flash devices (such as NAND flash) in mind. .I Logfs is itself hardware independent, requiring other devices to provide the physical medium. Currently only .IR flash (3) devices are supported. .PP The file system maintains two storage regions on the same medium: a log-structured hierarchical file system that implements all the functionality communicable by the 9P protocol (see .IR intro (5)), and a boot partition that offers a fixed amount of flat storage suitable for holding such things as a kernel boot image, boot parameters etc. The boot partition can be accessed and updated without understanding all but the simplest facts about the hierarchical file system, making it easy to implement boot loaders with small footprints. .PP The physical layout of the file system varies from medium to medium, so that the specialised features of the medium can be accounted for. .PP The user table is maintained in memory; there is one table, shared between all file systems supported by this driver. There is no distinction between users and groups: a user is a group with one member. The user table records a mapping between uids and unames, as well as recording the leader and members of each group. A .I uid is a string naming a user or group that is stored in the file system. A .I uname is the string naming a user or group that is used in file system protocol messages (see .IR intro (5)). There is a distinction so that unames can be safely reused, even though uids cannot. .PP Configuration and control of the file systems is by writing commands to .BR /dev/logfsctl : .TP .BI fsys " name" .br Sets the current file system to .IR name , which must be configured. Subsequent commands, not prefixed with .BI fsys name\fR, will by applied to the name file system. .TP .BI [fsys " name\f5] config\fI flash-device" .br Configures file system .I name to be written to .BI flash (3) device .IR flash-device . This does not initialise or format the filesystem, but simply bind .I name to .IR flash-device . For each configured .IR name , two files appear in the device name space, .BI /dev/logfs name and .BI /dev/logfs name\f5boot\fI. The former serves the 9P protocol giving access to the hierarchical file system; the latter is a fixed size file that represents the boot partition. .TP .BI [fsys " name\f5] format \fIbootsize" .br Formats the underlying medium as a .I logfs format file system. Sufficent storage is set aside to create a boot partition of at least .I bootsize bytes. Some medium implementations (eg, for NAND flash) store file system parameters (eg, location, size and boot partition size) to enable automatic location of file systems and improve bad block detection. These must be part of the boot partition so that they are easily accessible to boot loaders, so such medium implementations may also enforce a minimum size for the boot partition. .TP .BI [fsys " name\f5] open [-P] [-W]" .br Initialises the specified file system, and makes it available for use. The file system structure is verified, bad blocks are repaired and, in the case of the log structured file system, and the log replayed to regenerate the directory structure. The .B -W option reduces the permission control on .IR wstat (5) requests. Specifically it allows the .BR uid , .BR gid , .BR mtime , and .B perm to be changed by anyone. The .B -P option removes all file access controls, allowing anyone to open any file in any mode. .TP .BI [fsys " name\f5] sweep" .br Forces the log to be swept, if it has been written to since last being swept. The log is normally swept automatically when space is low. .TP .BI [fsys " name\f5] sync" .br Flush any buffered log or data to the underlying device. Use before shutting down the system if the device is not unmounted. (See notes below.) .TP .BI [fsys " name\f5] trace [\fIlevel\f5]" .br If .I level is non-zero, internal diagnostics for the log file system are enabled at the given level. If .I level is zero, or missing, tracing is disabled. .TP .BI [fsys " name\f5] unconfig" .br removes the configuration. The file system must not be mounted, or the boot partition open, before doing this. .TP .BI uname " uname uid" .TP .BI uname " uname \f5:\fPuid" .br adds the user with uname .I uname and uid .I uid to the in-memory table .TP .BI uname " uname \f5%\fPnewname" .br renames .I uname to .IR newname , throughout the user table .TP .BI uname " uname \f5=\fPleader" .br sets the group leader to the uname .I leader .TP .BI uname " uname \f5=" .br removes the group leader; then all members are leaders .TP .BI uname " uname \f5+\fPmember" .br add the uname .I member to the group .TP .BI uname " uname \f5-\fPmember" .br removes the uname .I member from the group .SS Notes The file system log may be subject to a small amount of buffering for efficiency purposes; therefore, it is necessary to unmount the file system before disconnecting the power to avoid losing recent updates. Failure to do this does not result in inconsistencies in the file system, but some recent changes will be lost. Equivalently, a .IR wstat (5) of any file or directory, with all fields set to .I no change (also known as a .I wstat .IR flush) will cause the log to be written to disk. Note that during a dismount, and also a .I wstat .IR flush , a .I wstat flush is also applied to the underlying .IR flash (3) device. Furthermore, since some buffering is used on the log, needless use of .I wstat flush will consume log space more rapidly than normal, although it will be recovered during the next sweep. .PP The log is automatically swept when space is low, so there is not normally any need to use the .B sweep command. .SH SOURCE .B /liblogfs .br .B /libnandfs .br .B /emu/port/devlogfs.c .br .B /os/port/devlogfs.c .SH SEE ALSO .IR flash (3), .IR ftl (3), .IR kfs (4) .SH BUGS The only medium currently supported is NAND flash. This is detected by recognising the manufacturer and device ids supplied by the status file of the .IR flash (3) device.