ref: 75c92428225428c8fde2d015f010e608a0b12f1d
dir: /os/sa1110/l.s/
#include "mem.h" /* * Entered here from the boot loader with * supervisor mode, interrupts disabled; * MMU, IDC and WB disabled. */ TEXT _startup(SB), $-4 MOVW $setR12(SB), R12 /* static base (SB) */ MOVW $(PsrDirq|PsrDfiq|PsrMsvc), R1 /* ensure SVC mode with interrupts disabled */ MOVW R1, CPSR MOVW $(MACHADDR+BY2PG-4), R13 /* stack; 4 bytes for link */ BL main(SB) dead: B dead BL _div(SB) /* hack to get _div etc loaded */ TEXT getcpuid(SB), $-4 MRC CpMMU, 0, R0, C(CpCPUID), C(0) RET TEXT mmugetctl(SB), $-4 MRC CpMMU, 0, R0, C(CpControl), C(0) RET TEXT mmugetdac(SB), $-4 MRC CpMMU, 0, R0, C(CpDAC), C(0) RET TEXT mmugetfar(SB), $-4 MRC CpMMU, 0, R0, C(CpFAR), C(0) RET TEXT mmugetfsr(SB), $-4 MRC CpMMU, 0, R0, C(CpFSR), C(0) RET TEXT mmuputdac(SB), $-4 MCR CpMMU, 0, R0, C(CpDAC), C(0) RET TEXT mmuputfsr(SB), $-4 MCR CpMMU, 0, R0, C(CpFSR), C(0) RET TEXT mmuputttb(SB), $-4 MCR CpMMU, 0, R0, C(CpTTB), C(0) RET TEXT mmuputctl(SB), $-4 MCR CpMMU, 0, R0, C(CpControl), C(0) MOVW R0, R0 MOVW R0, R0 RET TEXT tlbinvalidateall(SB), $-4 MCR CpMMU, 0, R0, C(CpTLBops), C(7) RET TEXT tlbinvalidate(SB), $-4 MCR CpMMU, 0, R0, C(CpTLBops), C(7), 1 RET TEXT mmuenable(SB), $-4 MOVW $1, R1 MCR CpMMU, 0, R1, C(CpDAC), C(3) /* set domain 0 to client */ /* disable and flush all caches and TLB's before (re-)enabling MMU */ MOVW $(CpCi32 | CpCd32 | (1<<6) | CpCsystem), R1 MRC CpMMU, 0, R1, C(CpControl), C(0) MOVW $0, R1 /* disable everything */ MCR CpMMU, 0, R1, C(CpCacheCtl), C(7), 0 /* Flush I&D Caches */ MCR CpMMU, 0, R1, C(CpCacheCtl), C(10), 4 /* drain write buffer */ MCR CpMMU, 0, R1, C(CpTLBops), C(7), 0 /* Flush I&D TLB */ MCR CpMMU, 0, R1, C(CpRBops), C(0), 0 /* Flush Read Buffer */ /* enable desired mmu mode (R0) */ MCR CpMMU, 0, R0, C(1), C(0) MOVW R0, R0 MOVW R0, R0 MOVW R0, R0 MOVW R0, R0 RET /* start running in remapped area */ TEXT setr13(SB), $-4 MOVW 4(FP), R1 MOVW CPSR, R2 BIC $PsrMask, R2, R3 ORR R0, R3 MOVW R3, CPSR MOVW R13, R0 MOVW R1, R13 MOVW R2, CPSR RET TEXT vectors(SB), $-4 MOVW 0x18(R15), R15 /* reset */ MOVW 0x18(R15), R15 /* undefined */ MOVW 0x18(R15), R15 /* SWI */ MOVW 0x18(R15), R15 /* prefetch abort */ MOVW 0x18(R15), R15 /* data abort */ MOVW 0x18(R15), R15 /* reserved */ MOVW 0x18(R15), R15 /* IRQ */ MOVW 0x18(R15), R15 /* FIQ */ TEXT vtable(SB), $-4 WORD $_vsvc(SB) /* reset, in svc mode already */ WORD $_vund(SB) /* undefined, switch to svc mode */ WORD $_vsvc(SB) /* swi, in svc mode already */ WORD $_vpab(SB) /* prefetch abort, switch to svc mode */ WORD $_vdab(SB) /* data abort, switch to svc mode */ WORD $_vsvc(SB) /* reserved */ WORD $_virq(SB) /* IRQ, switch to svc mode */ WORD $_vfiq(SB) /* FIQ, switch to svc mode */ TEXT _vund(SB), $-4 MOVM.DB [R0-R3], (R13) MOVW $PsrMund, R0 B _vswitch TEXT _vsvc(SB), $-4 MOVW.W R14, -4(R13) MOVW CPSR, R14 MOVW.W R14, -4(R13) BIC $PsrMask, R14 ORR $(PsrDirq|PsrDfiq|PsrMsvc), R14 MOVW R14, CPSR MOVW $PsrMsvc, R14 MOVW.W R14, -4(R13) B _vsaveu TEXT _vpab(SB), $-4 MOVM.DB [R0-R3], (R13) MOVW $PsrMabt, R0 B _vswitch TEXT _vdab(SB), $-4 MOVM.DB [R0-R3], (R13) MOVW $(PsrMabt+1), R0 B _vswitch TEXT _vfiq(SB), $-4 /* FIQ */ MOVM.DB [R0-R3], (R13) MOVW $PsrMfiq, R0 B _vswitch TEXT _virq(SB), $-4 /* IRQ */ MOVM.DB [R0-R3], (R13) MOVW $PsrMirq, R0 _vswitch: /* switch to svc mode */ MOVW SPSR, R1 MOVW R14, R2 MOVW R13, R3 MOVW CPSR, R14 BIC $PsrMask, R14 ORR $(PsrDirq|PsrDfiq|PsrMsvc), R14 MOVW R14, CPSR MOVM.DB.W [R0-R2], (R13) MOVM.DB (R3), [R0-R3] _vsaveu: /* Save Registers */ MOVW.W R14, -4(R13) /* save link */ MCR CpMMU, 0, R0, C(0), C(0), 0 SUB $8, R13 MOVM.DB.W [R0-R12], (R13) MOVW R0, R0 /* gratuitous noop */ MOVW $setR12(SB), R12 /* static base (SB) */ MOVW R13, R0 /* argument is ureg */ SUB $8, R13 /* space for arg+lnk*/ BL trap(SB) _vrfe: /* Restore Regs */ MOVW CPSR, R0 /* splhi on return */ ORR $(PsrDirq|PsrDfiq), R0, R1 MOVW R1, CPSR ADD $(8+4*15), R13 /* [r0-R14]+argument+link */ MOVW (R13), R14 /* restore link */ MOVW 8(R13), R0 MOVW R0, SPSR MOVM.DB.S (R13), [R0-R14] /* restore user registers */ MOVW R0, R0 /* gratuitous nop */ ADD $12, R13 /* skip saved link+type+SPSR*/ RFE /* MOVM.IA.S.W (R13), [R15] */ TEXT splhi(SB), $-4 MOVW CPSR, R0 ORR $(PsrDirq), R0, R1 MOVW R1, CPSR MOVW $(MACHADDR), R6 MOVW R14, (R6) /* m->splpc */ RET TEXT spllo(SB), $-4 MOVW CPSR, R0 BIC $(PsrDirq|PsrDfiq), R0, R1 MOVW R1, CPSR RET TEXT splx(SB), $-4 MOVW $(MACHADDR), R6 MOVW R14, (R6) /* m->splpc */ TEXT splxpc(SB), $-4 MOVW R0, R1 MOVW CPSR, R0 MOVW R1, CPSR RET TEXT spldone(SB), $-4 RET TEXT islo(SB), $-4 MOVW CPSR, R0 AND $(PsrDirq), R0 EOR $(PsrDirq), R0 RET TEXT splfhi(SB), $-4 MOVW CPSR, R0 ORR $(PsrDfiq|PsrDirq), R0, R1 MOVW R1, CPSR RET TEXT splflo(SB), $-4 MOVW CPSR, R0 BIC $(PsrDfiq), R0, R1 MOVW R1, CPSR RET TEXT getcpsr(SB), $-4 MOVW CPSR, R0 RET TEXT getspsr(SB), $-4 MOVW SPSR, R0 RET TEXT getcallerpc(SB), $-4 MOVW 0(R13), R0 RET TEXT _tas(SB), $-4 MOVW R0, R1 MOVW $0xDEADDEAD, R2 SWPW R2, (R1), R0 RET TEXT setlabel(SB), $-4 MOVW R13, 0(R0) /* sp */ MOVW R14, 4(R0) /* pc */ MOVW $0, R0 RET TEXT gotolabel(SB), $-4 MOVW 0(R0), R13 /* sp */ MOVW 4(R0), R14 /* pc */ MOVW $1, R0 RET /* * flush the whole icache */ TEXT icflushall(SB), $-4 MCR CpMMU, 0, R0, C(CpCacheCtl), C(5), 0 MOVW R0,R0 MOVW R0,R0 MOVW R0,R0 MOVW R0,R0 RET /* * write back whole data cache and drain write buffer */ TEXT dcflushall(SB), $-4 _dcflushall: MOVW $(DCFADDR), R0 ADD $8192, R0, R1 dcflushall1: MOVW.P CACHELINESZ(R0), R2 CMP R1,R0 BNE dcflushall1 MCR CpMMU, 0, R0, C(CpCacheCtl), C(10), 4 /* drain write buffer */ MOVW R0,R0 MOVW R0,R0 MOVW R0,R0 MOVW R0,R0 RET /* * write back a given region and drain write buffer */ TEXT dcflush(SB), $-4 MOVW 4(FP), R1 CMP $(4*1024), R1 BGE _dcflushall ADD R0, R1 BIC $(CACHELINESZ-1), R0 dcflush1: MCR CpMMU, 0, R0, C(CpCacheCtl), C(10), 1 /* clean entry */ ADD $CACHELINESZ, R0 CMP R1, R0 BLO dcflush1 MCR CpMMU, 0, R0, C(CpCacheCtl), C(10), 4 /* drain write buffer */ MOVW R0,R0 MOVW R0,R0 MOVW R0,R0 MOVW R0,R0 RET /* * write back mini data cache */ TEXT minidcflush(SB), $-4 MOVW $(MCFADDR), R0 ADD $(16*CACHELINESZ), R0, R1 wbbflush: MOVW.P CACHELINESZ(R0), R2 CMP R1,R0 BNE wbbflush MCR CpMMU, 0, R0, C(CpCacheCtl), C(10), 4 /* drain write buffer */ MOVW R0,R0 MOVW R0,R0 MOVW R0,R0 MOVW R0,R0 RET /* * invalidate data caches (main and mini) */ TEXT dcinval(SB), $-4 MCR CpMMU, 0, R0, C(CpCacheCtl), C(6), 0 RET /* for devboot */ TEXT gotopc(SB), $-4 MOVW R0, R1 MOVW $0, R0 MOVW R1, PC RET /* * See page 9-26 of the SA1110 developer's manual. * trap copies this to a cache-aligned area. */ TEXT _idlemode(SB), $-4 MOVW $UCDRAMZERO, R1 MOVW R0,R0 MOVW R0,R0 MOVW R0,R0 MOVW R0,R0 MOVW R0,R0 MOVW R0,R0 MOVW R0,R0 /* the following must be on a cache line boundary */ MCR CpPWR, 0, R0, C(CpTest), C(0x2), 2 /* disable clock switching */ MOVW (R1), R0 /* non-cacheable memory read */ MCR CpPWR, 0, R0, C(CpTest), C(0x8), 2 MCR CpPWR, 0, R0, C(CpTest), C(0x2), 1 /* enable clock switching */ RET /* * the following code is considerably modified from the * sleep code by nemo@gsyc.escet.urjc.es for Plan 9, but that's * where it started. in particular, there's no need to save regs in all modes, * since here we're called from kernel main level (a kproc) so nothing is live; * the only regs needed are the various R13s, but we have trap restore them on resume. * similarly there's no need to save SPSR, CPSR, etc. (even CpPID isn't really needed here). */ #define MDREFR_k1db2 (1<<22) #define MDREFR_slfrsh (1<<31) /* self refresh */ #define MDREFR_e1pin (1<<20) #define MSC_rt ((3<<16)|(3<<0)) #define MDCFNG_de ((3<<16)|(3<<0)) /* dram enable, banks (3 2), (1 0) */ TEXT suspenditall(SB), $-4 MOVW.W R14, -4(R13) /* push mmu state on stack */ MRC CpMMU, 0, R1, C(CpDAC), C(0) MRC CpMMU, 0, R2, C(CpTTB), C(0) MRC CpMMU, 0, R3, C(CpPID), C(0) MRC CpMMU, 0, R4, C(CpControl), C(0) MOVM.DB.W [R1-R4], (R13) /* if pspr by convention held a stack pointer pointing to a pc we wouldn't need power_state */ MOVW R13, power_state+0(SB) BL dcflushall(SB) /* don't write DRAM after this */ MOVW $PHYSPOWER, R3 /* put resume address in scratchpad for boot loader */ MOVW $power_resume+0(SB), R2 MOVW R2, 0x8(R3) /* pspr */ /* disable clock switching */ MCR CpPWR, 0, R1, C(CpTest), C(0x2), 2 /* adjust mem timing first to avoid processor bug causing hang */ MOVW $MDCNFG, R5 MOVW 0x1c(R5), R2 ORR $(MDREFR_k1db2), R2 MOVW R2, 0x1c(R5) /* set PLL to lower speed w/ delay */ MOVW $(120*206),R0 l11: SUB $1,R0 BGT l11 MOVW $0, R2 MOVW R2, 0x14(R3) /* ppcr */ MOVW $(120*206),R0 l12: SUB $1,R0 BGT l12 /* * SA1110 fix for various suspend bugs in pre-B4 chips (err. 14-16, 18): * set up register values here for use in code below that is at most * one cache line (32 bytes) long, to run without DRAM. */ /* 1. clear RT in MSCx (R1, R7, R8) without changing other bits */ MOVW 0x10(R5), R1 /* MSC0 */ BIC $(MSC_rt), R1 MOVW 0x14(R5), R7 /* MSC1 */ BIC $(MSC_rt), R7 MOVW 0x2c(R5), R8 /* MSC2 */ BIC $(MSC_rt), R8 /* 2. clear DRI0-11 in MDREFR (R4) without changing other bits */ MOVW 0x1c(R5), R4 BIC $(0xfff0), R4 /* 3. set SLFRSH in MDREFR (R6) without changing other bits */ ORR $(MDREFR_slfrsh), R4, R6 /* 4. clear DE in MDCNFG (R9), and any other bits desired */ MOVW 0x0(R5), R9 BIC $(MDCFNG_de), R9 /* 5. clear SLFRSH and E1PIN (R10), without changing other bits */ BIC $(MDREFR_slfrsh), R4, R10 BIC $(MDREFR_e1pin), R10 /* 6. force sleep mode in PMCR (R2) */ MOVW $1,R2 MOVW suspendcode+0(SB), R0 B (R0) /* off to do it */ /* * the following is copied by trap.c to a cache-aligned area (suspendcode), * so that it can all run during disabling of DRAM */ TEXT _suspendcode(SB), $-4 /* 1: clear RT field of all MSCx registers */ MOVW R1, 0x10(R5) MOVW R7, 0x14(R5) MOVW R8, 0x2c(R5) /* 2: clear DRI field in MDREFR */ MOVW R4, 0x1c(R5) /* 3: set SLFRSH bit in MDREFR */ MOVW R6, 0x1c(R5) /* 4: clear DE bits in MDCFNG */ MOVW R9, 0x0(R5) /* 5: clear SLFRSH and E1PIN in MDREFR */ MOVW R10, 0x1c(R5) /* 6: suspend request */ MOVW R2, 0x0(R3) /* pmcr */ B 0(PC) /* wait for it */ /* * The boot loader comes here after the resume. */ TEXT power_resume(SB), $-4 MOVW $(PsrDirq|PsrDfiq|PsrMsvc), R0 MOVW R0, CPSR /* svc mode, interrupts off */ MOVW $setR12(SB), R12 /* flush caches */ MCR CpMMU, 0, R0, C(CpCacheCtl), C(7), 0 /* drain prefetch */ MOVW R0,R0 MOVW R0,R0 MOVW R0,R0 MOVW R0,R0 /* drain write buffer */ MCR CpMMU, 0, R0, C(CpCacheCtl), C(10), 4 /* flush tlb */ MCR CpMMU, 0, R0, C(CpTLBops), C(7) /* restore state */ MOVW power_state+0(SB), R13 MOVM.IA.W (R13), [R1-R4] MOVW.P 4(R13), R14 MCR CpMMU, 0, R1, C(CpDAC), C(0x0) MCR CpMMU, 0, R2, C(CpTTB), C(0x0) MCR CpMMU, 0, R3, C(CpPID), C(0x0) MCR CpMMU, 0, R4, C(CpControl), C(0x0) /* enable cache and mmu */ MOVW R0,R0 MOVW R0,R0 MOVW R0,R0 MOVW R0,R0 /* flush i&d caches */ MCR CpMMU, 0, R0, C(CpCacheCtl), C(7) /* flush tlb */ MCR CpMMU, 0, R0, C(CpTLBops), C(7) /* drain prefetch */ MOVW R0,R0 MOVW R0,R0 MOVW R0,R0 MOVW R0,R0 /* enable clock switching */ MCR CpPWR, 0, R1, C(CpTest), C(1), 2 RET GLOBL power_state+0(SB), $4 /* for debugging sleep code: */ TEXT fastreset(SB), $-4 MOVW $PHYSRESET, R7 MOVW $1, R1 MOVW R1, (R7) RET