ref: 76b565d8b219c8db94a882e93725b4ab735414de
dir: /os/cerf405/l.s/
#include "mem.h" #define MB (1024*1024) /* * common ppc special purpose registers */ #define DSISR 18 #define SRR0 26 /* Saved Registers (exception) */ #define SRR1 27 #define SPRG0 272 /* Supervisor Private Registers */ #define SPRG1 273 #define SPRG2 274 #define SPRG3 275 #define TBRU 269 /* Time base Upper/Lower (Reading) */ #define TBRL 268 #define TBWU 285 /* Time base Upper/Lower (Writing) */ #define TBWL 284 #define PVR 287 /* Processor Version */ /* * 4xx-specific special purpose registers of interest here */ #define ICCR 1019 /* instruction cache control */ #define DCCR 1018 /* data cache control */ #define DBCR0 1010 /* debug control register 0 */ #define DCWR 964 /* data cache write-through */ #define PID 945 /* TLB process ID */ #define CCR0 947 /* core configuration register 0 */ #define SLER 955 /* storage little-endian */ #define SU0R 956 /* storage user-defined 0 */ #define SRR2 990 #define SRR3 991 /* SPRGn up to 7, if needed, on the 400 series */ #define DEAR 961 /* data error address */ #define ESR 980 /* exception syndrome */ #define EVPR 982 /* exception vector prefix */ #define PIT 987 /* interval timer */ #define SGR 953 /* storage guarded */ #define TCR 986 /* timer control */ #define TSR 984 /* timer status */ #define ZPR 944 /* zone protection */ /* * 4xx-specific(?) device control registers */ #define OCM0_DSCNTL 0x1B /* OCM data-side control register */ /* use of SPRG registers in save/restore */ #define SAVER0 SPRG0 #define SAVER1 SPRG1 #define SAVELR SPRG2 #define SAVEXX SPRG3 /* special instruction definitions */ #define BDNZ BC 16,0, #define BDNE BC 0,2, #define TLBIA WORD $((31<<26)|(370<<1)) #define TLBSYNC WORD $((31<<26)|(566<<1)) #define MFTB(tbr,d) WORD $((31<<26)|((d)<<21)|((tbr&0x1f)<<16)|(((tbr>>5)&0x1f)<<11)|(371<<1)) /* 603/603e specific: load tlb entries */ #define TLBLD(x) WORD $((31<<26)|(978<<1)|((x&0x1F)<<11)) #define TLBLI(x) WORD $((31<<26)|(1010<<1)|((x&0x1F)<<11)) /* 400 models; perhaps others */ #define ICCCI(a,b) WORD $((31<<26)|((a)<<16)|((b)<<11)|(966<<1)) #define DCCCI(a,b) WORD $((31<<26)|((a)<<16)|((b)<<11)|(454<<1)) /* these follow the source -> dest ordering */ #define DCREAD(s,t) WORD $((31<<26)|((t)<<21)|((s)<<11)|(486<<1)) #define DCRF(n) ((((n)>>5)&0x1F)|(((n)&0x1F)<<5)) #define MTDCR(s,n) WORD $((31<<26)|((s)<<21)|(DCRF(n)<<11)|(451<<1)) #define MFDCR(n,t) WORD $((31<<26)|((t)<<21)|(DCRF(n)<<11)|(323<<1)) #define TLBRELO(a,t) WORD $((31<<26)|((t)<<21)|((a)<<16)|(1<<11)|(946<<1)) #define TLBREHI(a,t) WORD $((31<<26)|((t)<<21)|((a)<<16)|(0<<11)|(946<<1)) #define TLBWELO(s,a) WORD $((31<<26)|((s)<<21)|((a)<<16)|(1<<11)|(978<<1)) #define TLBWEHI(s,a) WORD $((31<<26)|((s)<<21)|((a)<<16)|(0<<11)|(978<<1)) #define TLBSX(a,b,t) WORD $((31<<26)|((t)<<21)|((a)<<16)|((b)<<11)|(914<<1)) #define TLBSXCC(a,b,t) WORD $((31<<26)|((t)<<21)|((a)<<16)|((b)<<11)|(914<<1)|1) #define WRTMSR_EE(s) WORD $((31<<26)|((s)<<21)|(131<<1)) #define WRTMSR_EEI(e) WORD $((31<<26)|((e)<<16)|(163<<1)) /* on some models mtmsr doesn't synchronise enough (eg, 603e) */ #define MSRSYNC SYNC; ISYNC /* on the 400 series, the prefetcher madly fetches across RFI, sys call, and others; use BR 0(PC) to stop */ #define RFI WORD $((19<<26)|(50<<1)); BR 0(PC) #define RFCI WORD $((19<<26)|(51<<1)); BR 0(PC) #define UREGSPACE (UREGSIZE+8) /* could define STEP to set an LED to mark progress */ #define STEP(x) /* * Boot first processor */ TEXT start(SB), $-4 MOVW MSR, R3 RLWNM $0, R3, $~MSR_EE, R3 OR $MSR_ME, R3 ISYNC MOVW R3, MSR /* turn off interrupts but enable traps */ MSRSYNC MOVW $0, R0 /* except during trap handling, R0 is zero from now on */ MOVW R0, CR MOVW $setSB-KZERO(SB), R2 /* SB until mmu on */ /* * reset the caches and disable them until mmu on */ MOVW R0, SPR(ICCR) ICCCI(0, 2) /* the errata reveals that EA is used; we'll use SB */ ISYNC MOVW $((CACHEWAYSIZE/CACHELINESZ)-1), R3 MOVW R3, CTR MOVW R0, R3 dcinv: DCCCI(0,3) ADD $32, R3 BDNZ dcinv /* cache is copy-back, disabled; no user-defined 0; big endian throughout */ MOVW R0, SPR(DCWR) MOVW R0, SPR(DCCR) MOVW R0, SPR(SU0R) MOVW R0, SPR(SLER) ISYNC /* guard everything above 0x20000000 */ MOVW $~(0xF000<<16), R3 MOVW R3, SPR(SGR) ISYNC /* set access to LED */ MOVW $PHYSGPIO, R4 MOVW $(1<<31), R6 MOVW $(0xC000<<16), R5 MOVW 4(R4), R3 OR R6, R3 MOVW R3, 4(R4) /* tcr set */ MOVW 0x18(R4), R3 ANDN R6, R3 MOVW R3, 0x18(R4) /* odr reset */ MOVW 8(R4), R3 ANDN R5, R3 MOVW R3, 8(R4) /* osrh uses or */ MOVW 0x10(R4), R3 ANDN R5, R3 MOVW R3, 0x10(R4) /* tsr uses tcr */ MOVW $(1<<31), R4 /* reset MAL */ MTDCR(0x180, 4) /* MOVW $'H', R3 BL uartputc(SB) MOVW $'\n', R3 BL uartputc(SB) */ /* * set other system configuration values */ MOVW R0, SPR(PIT) MOVW $~0, R3 MOVW R3, SPR(TSR) STEP(1) BL kernelmmu(SB) /* now running with correct addresses, mmu on */ MOVW $setSB(SB), R2 /* enable caches for kernel 128mb in real mode; data is copy-back */ MOVW R0, SPR(DCWR) MOVW $(1<<31), R3 MOVW R3, SPR(DCCR) MOVW R3, SPR(ICCR) /* BL ledoff(SB) MOVW $0x800, R8 MOVW R8, LR BL (LR) BR 0(PC) */ STEP(2) /* no kfpinit on 4xx */ MOVW $mach0(SB), R(MACH) ADD $(MACHSIZE-8), R(MACH), R1 SUB $4, R(MACH), R3 ADD $4, R1, R4 clrmach: MOVWU R0, 4(R3) CMP R3, R4 BNE clrmach MOVW R0, R(USER) MOVW R0, 0(R(MACH)) MOVW $edata(SB), R3 MOVW $end(SB), R4 ADD $4, R4 SUB $4, R3 clrbss: MOVWU R0, 4(R3) CMP R3, R4 BNE clrbss STEP(3) BL main(SB) BR 0(PC) TEXT kernelmmu(SB), $-4 TLBIA ISYNC SYNC /* make following TLB entries shared, TID=PID=0 */ MOVW R0, SPR(PID) /* all zones are supervisor, access controlled by TLB */ MOVW R0, SPR(ZPR) /* map various things 1:1 */ MOVW $tlbtab-KZERO(SB), R4 MOVW $tlbtabe-KZERO(SB), R5 SUB R4, R5 MOVW $(2*4), R6 DIVW R6, R5 SUB $4, R4 MOVW R5, CTR MOVW R0, R3 ltlb: MOVWU 4(R4), R5 /* TLBHI */ TLBWEHI(5,3) MOVWU 4(R4), R5 /* TLBLO */ TLBWELO(5,3) ADD $1, R3 BDNZ ltlb MOVW LR, R3 OR $KZERO, R3 MOVW R3, SPR(SRR0) MOVW MSR, R4 OR $(MSR_IR|MSR_DR), R4 MOVW R4, SPR(SRR1) RFI /* resume in kernel mode in caller */ TEXT ledoff(SB), $0 MOVW $PHYSGPIO, R4 MOVW 0(R4), R3 RLWNM $0, R3, $~(1<<31), R3 /* LED off */ MOVW R3, 0(R4) RETURN TEXT splhi(SB), $0 MOVW MSR, R3 RLWNM $0, R3, $~MSR_EE, R4 SYNC MOVW R4, MSR MSRSYNC MOVW LR, R31 MOVW R31, 4(R(MACH)) /* save PC in m->splpc */ RETURN TEXT splx(SB), $0 MOVW MSR, R4 RLWMI $0, R3, $MSR_EE, R4 RLWNMCC $0, R3, $MSR_EE, R5 BNE splx0 MOVW LR, R31 MOVW R31, 4(R(MACH)) /* save PC in m->splpc */ splx0: SYNC MOVW R4, MSR MSRSYNC RETURN TEXT splxpc(SB), $0 MOVW MSR, R4 RLWMI $0, R3, $MSR_EE, R4 RLWNMCC $0, R3, $MSR_EE, R5 SYNC MOVW R4, MSR MSRSYNC RETURN TEXT spllo(SB), $0 MFTB(TBRL, 3) MOVW R3, spltbl(SB) MOVW MSR, R3 OR $MSR_EE, R3, R4 SYNC MOVW R4, MSR MSRSYNC RETURN TEXT spldone(SB), $0 RETURN TEXT islo(SB), $0 MOVW MSR, R3 RLWNM $0, R3, $MSR_EE, R3 RETURN TEXT setlabel(SB), $-4 MOVW LR, R31 MOVW R1, 0(R3) MOVW R31, 4(R3) MOVW $0, R3 RETURN TEXT gotolabel(SB), $-4 MOVW 4(R3), R31 MOVW R31, LR MOVW 0(R3), R1 MOVW $1, R3 RETURN TEXT tlbwelo(SB), $-4 MOVW v+4(FP), R5 SYNC TLBWELO(5, 3) ISYNC SYNC RETURN TEXT tlbwehi(SB), $-4 MOVW v+4(FP), R5 SYNC TLBWEHI(5, 3) ISYNC SYNC RETURN TEXT tlbrehi(SB), $-4 TLBREHI(3, 3) RETURN TEXT tlbrelo(SB), $-4 TLBRELO(3, 3) RETURN TEXT tlbsxcc(SB), $-4 TLBSXCC(0, 3, 3) BEQ tlbsxcc0 MOVW $-1, R3 /* not found */ tlbsxcc0: RETURN /* * enter with stack set and mapped. * on return, SB (R2) has been set, and R3 has the Ureg*, * the MMU has been re-enabled, kernel text and PC are in KSEG, * R(MACH) has been set, and R0 contains 0. * * this can be simplified in the Inferno regime */ TEXT saveureg(SB), $-4 /* * save state */ MOVMW R2, 48(R1) /* r2:r31 */ MOVW $setSB(SB), R2 MOVW SPR(SAVER1), R4 MOVW R4, 44(R1) MOVW SPR(SAVER0), R5 MOVW R5, 40(R1) MOVW CTR, R6 MOVW R6, 36(R1) MOVW XER, R4 MOVW R4, 32(R1) MOVW CR, R5 MOVW R5, 28(R1) MOVW SPR(SAVELR), R6 /* LR */ MOVW R6, 24(R1) /* pad at 20(R1) */ /* old PC(16) and status(12) saved earlier */ MOVW SPR(SAVEXX), R0 MOVW R0, 8(R1) /* cause/vector */ ADD $8, R1, R3 /* Ureg* */ STWCCC R3, (R1) /* break any pending reservations */ MOVW $0, R0 /* compiler/linker expect R0 to be zero */ MOVW MSR, R5 OR $(MSR_IR|MSR_DR), R5 /* enable MMU */ MOVW R5, SPR(SRR1) MOVW LR, R31 OR $KZERO, R31 /* return PC in KSEG0 */ MOVW R31, SPR(SRR0) SYNC ISYNC RFI /* returns to trap handler */ TEXT icflush(SB), $-4 /* icflush(virtaddr, count) */ MOVW n+4(FP), R4 CMP R4, R0 BLE icf1 RLWNM $0, R3, $~(CACHELINESZ-1), R5 SUB R5, R3 ADD R3, R4 ADD $(CACHELINESZ-1), R4 SRAW $CACHELINELOG, R4 MOVW R4, CTR icf0: ICBI (R5) ADD $CACHELINESZ, R5 BDNZ icf0 icf1: ISYNC RETURN /* * flush to store and invalidate globally */ TEXT dcflush(SB), $-4 /* dcflush(virtaddr, count) */ SYNC MOVW n+4(FP), R4 RLWNM $0, R3, $~(CACHELINESZ-1), R5 CMP R4, $0 BLE dcf1 SUB R5, R3 ADD R3, R4 ADD $(CACHELINESZ-1), R4 SRAW $CACHELINELOG, R4 MOVW R4, CTR dcf0: DCBF (R5) ADD $CACHELINESZ, R5 BDNZ dcf0 SYNC dcf1: ISYNC MOVW R5, R3 /* check its operation */ RETURN /* * invalidate without flush, globally */ TEXT dcinval(SB), $-4 /* dcinval(virtaddr, count) */ SYNC MOVW n+4(FP), R4 RLWNM $0, R3, $~(CACHELINESZ-1), R5 CMP R4, $0 BLE dci1 SUB R5, R3 ADD R3, R4 ADD $(CACHELINESZ-1), R4 SRAW $CACHELINELOG, R4 MOVW R4, CTR dci0: DCBI (R5) ADD $CACHELINESZ, R5 BDNZ dci0 SYNC ISYNC dci1: RETURN TEXT dccci(SB), $-4 SYNC DCCCI(0, 3) ISYNC RETURN TEXT _tas(SB), $0 SYNC MOVW R3, R4 MOVW $0xdeaddead,R5 tas1: DCBF (R4) /* fix for 603x bug */ LWAR (R4), R3 CMP R3, $0 BNE tas0 STWCCC R5, (R4) BNE tas1 tas0: SYNC ISYNC RETURN TEXT gettbl(SB), $0 MFTB(TBRL, 3) RETURN TEXT gettbu(SB), $0 MFTB(TBRU, 3) RETURN TEXT getpvr(SB), $0 MOVW SPR(PVR), R3 RETURN TEXT getcallerpc(SB), $-4 MOVW 0(R1), R3 RETURN TEXT getdear(SB), $0 MOVW SPR(DEAR), R3 RETURN TEXT getdsisr(SB), $0 MOVW SPR(DSISR), R3 RETURN TEXT getmsr(SB), $0 MOVW MSR, R3 RETURN TEXT putmsr(SB), $0 SYNC MOVW R3, MSR MSRSYNC RETURN TEXT putevpr(SB), $0 MOVW R3, SPR(EVPR) RETURN TEXT getesr(SB), $0 MOVW SPR(ESR), R3 RETURN TEXT putesr(SB), $0 MOVW R3, SPR(ESR) RETURN TEXT getpit(SB), $0 MOVW SPR(PIT), R3 RETURN TEXT putpit(SB), $0 MOVW R3, SPR(PIT) RETURN TEXT gettsr(SB), $0 MOVW SPR(TSR), R3 RETURN TEXT puttsr(SB), $0 MOVW R3, SPR(TSR) RETURN TEXT puttcr(SB), $0 MOVW R3, SPR(TCR) RETURN TEXT eieio(SB), $0 EIEIO RETURN TEXT gotopc(SB), $0 MOVW R3, CTR MOVW LR, R31 /* for trace back */ BR (CTR) TEXT getccr0(SB), $-4 MOVW SPR(CCR0), R3 RETURN TEXT dcread(SB), $-4 MOVW 4(FP), R4 MOVW SPR(CCR0), R5 RLWNM $0, R5, $~0xFF, R5 OR R4, R5 MOVW R5, SPR(CCR0) SYNC ISYNC DCREAD(3, 3) RETURN TEXT getdcr(SB), $-4 MOVW $_getdcr(SB), R5 SLW $3, R3 ADD R3, R5 MOVW R5, CTR BR (CTR) TEXT putdcr(SB), $-4 MOVW $_putdcr(SB), R5 SLW $3, R3 ADD R3, R5 MOVW R5, CTR MOVW 8(R1), R3 BR (CTR) TEXT firmware(SB), $0 MOVW $(3<<28), R3 MOVW R3, SPR(DBCR0) /* system reset */ BR 0(PC) /* * byte swapping of arrays of long and short; * could possibly be avoided with more changes to drivers */ TEXT swabl(SB), $0 MOVW v+4(FP), R4 MOVW n+8(FP), R5 SRAW $2, R5, R5 MOVW R5, CTR SUB $4, R4 SUB $4, R3 swabl1: ADD $4, R3 MOVWU 4(R4), R7 MOVWBR R7, (R3) BDNZ swabl1 RETURN TEXT swabs(SB), $0 MOVW v+4(FP), R4 MOVW n+8(FP), R5 SRAW $1, R5, R5 MOVW R5, CTR SUB $2, R4 SUB $2, R3 swabs1: ADD $2, R3 MOVHZU 2(R4), R7 MOVHBR R7, (R3) BDNZ swabs1 RETURN TEXT legetl(SB), $0 MOVWBR (R3), R3 RETURN TEXT lesetl(SB), $0 MOVW v+4(FP), R4 MOVWBR R4, (R3) RETURN TEXT legets(SB), $0 MOVHBR (R3), R3 RETURN TEXT lesets(SB), $0 MOVW v+4(FP), R4 MOVHBR R4, (R3) RETURN TEXT itlbmiss(SB), $-4 BR traps TEXT dtlbmiss(SB), $-4 BR traps /* * traps force memory mapping off. * this code goes to much effort to restore it; * (a little more effort than needed for the Inferno environment) */ TEXT trapvec(SB), $-4 traps: MOVW LR, R0 pagefault: /* * map data virtually and make space to save */ MOVW R0, SPR(SAVEXX) /* vector */ trapcomm: MOVW R1, SPR(SAVER1) SYNC ISYNC MOVW MSR, R0 OR $(MSR_DR|MSR_ME), R0 /* make data space usable */ SYNC MOVW R0, MSR MSRSYNC SUB $UREGSPACE, R1 MOVW SPR(SRR0), R0 /* save SRR0/SRR1 now, since DLTB might be missing stack page */ MOVW R0, LR MOVW SPR(SRR1), R0 RLWNM $0, R0, $~MSR_WE, R0 /* remove wait state */ MOVW R0, 12(R1) /* save status: could take DLTB miss here */ MOVW LR, R0 MOVW R0, 16(R1) /* old PC */ BL saveureg(SB) BL trap(SB) BR restoreureg /* * critical trap/interrupt */ TEXT trapcvec(SB), $-4 MOVW LR, R0 /* for now we'll just restore the state to the conventions that trap expects, since we don't use critical intrs yet */ MOVW R0, SPR(SAVEXX) MOVW SPR(SRR2), R0 MOVW R0, SPR(SRR0) MOVW SPR(SRR3), R0 MOVW R0, SPR(SRR1) BR trapcomm TEXT intrvec(SB), $-4 MOVW LR, R0 /* * map data virtually and make space to save */ MOVW R0, SPR(SAVEXX) /* vector */ MOVW R1, SPR(SAVER1) SYNC ISYNC MOVW MSR, R0 OR $MSR_DR, R0 /* make data space usable */ SYNC MOVW R0, MSR MSRSYNC SUB $UREGSPACE, R1 MFTB(TBRL, 0) MOVW R0, intrtbl(SB) MOVW SPR(SRR0), R0 MOVW R0, LR MOVW SPR(SRR1), R0 RLWNM $0, R0, $~MSR_WE, R0 /* remove wait state */ MOVW R0, 12(R1) MOVW LR, R0 MOVW R0, 16(R1) BL saveureg(SB) MFTB(TBRL, 5) MOVW R5, isavetbl(SB) BL intr(SB) /* * restore state from Ureg and return from trap/interrupt */ restoreureg: MOVMW 48(R1), R2 /* r2:r31 */ /* defer R1 */ MOVW 40(R1), R0 MOVW R0, SPR(SAVER0) MOVW 36(R1), R0 MOVW R0, CTR MOVW 32(R1), R0 MOVW R0, XER MOVW 28(R1), R0 MOVW R0, CR /* CR */ MOVW 24(R1), R0 MOVW R0, SPR(SAVELR) /* LR */ /* pad, skip */ MOVW 16(R1), R0 MOVW R0, SPR(SRR0) /* old PC */ MOVW 12(R1), R0 MOVW R0, SPR(SRR1) /* old MSR */ /* cause, skip */ MOVW 44(R1), R1 /* old SP */ MOVW SPR(SAVELR), R0 MOVW R0, LR MOVW SPR(SAVER0), R0 RFI TEXT mul64fract(SB), $0 MOVW a0+8(FP), R9 MOVW a1+4(FP), R10 MOVW b0+16(FP), R4 MOVW b1+12(FP), R5 MULLW R10, R5, R13 /* c2 = lo(a1*b1) */ MULLW R10, R4, R12 /* c1 = lo(a1*b0) */ MULHWU R10, R4, R7 /* hi(a1*b0) */ ADD R7, R13 /* c2 += hi(a1*b0) */ MULLW R9, R5, R6 /* lo(a0*b1) */ MULHWU R9, R5, R7 /* hi(a0*b1) */ ADDC R6, R12 /* c1 += lo(a0*b1) */ ADDE R7, R13 /* c2 += hi(a0*b1) + carry */ MULHWU R9, R4, R7 /* hi(a0*b0) */ ADDC R7, R12 /* c1 += hi(a0*b0) */ ADDE R0, R13 /* c2 += carry */ MOVW R12, 4(R3) MOVW R13, 0(R3) RETURN GLOBL mach0+0(SB), $MACHSIZE GLOBL spltbl+0(SB), $4 GLOBL intrtbl+0(SB), $4 GLOBL isavetbl+0(SB), $4