ref: a5cb451b299b03f44154fac5780b6a57ca130ce0
dir: /man/9/radiobutton/
.TH RADIOBUTTON 9 .SH NAME radiobutton \- Create and manipulate radiobutton widgets .SH SYNOPSIS \f5radiobutton\fI \fIpathName \fR?\fIoptions\fR? .SH STANDARD OPTIONS .EX -activebackground -disabledcolor -justify -activeforeground -font -relief -anchor -foreground -takefocus -background -highlightcolor -text -bitmap -highlightthickness -underline -borderwidth -image .EE .SH "WIDGET-SPECIFIC OPTIONS" .TP .B -command \fIcommand\fP Specifies a Tk command to associate with the button. This command is typically invoked when mouse button 1 is released over the button window. The button's global variable (\f5-variable\fR option) will be updated before the command is invoked. .TP .B -height \fIdist\fP Specifies a desired height for the button. If this option isn't specified, the button's desired height is computed from the size of the image or bitmap or text being displayed in it. .TP .B -indicatoron \fIboolean\fP Specifies whether or not the indicator should be drawn. If false, the \f5relief\fP option is ignored and the widget's relief is always \f5sunken\fP if the widget is selected and \f5raised\fP otherwise. .TP .B -selectcolor \fIcolour\fP Specifies a background colour to use when the button is selected. If \f5indicatoron\fR is true, the colour applies to the indicator. If \f5indicatoron\fR is false, this colour is used as the background for the entire widget, in place of \f5background\fR or \f5activebackground\fR, whenever the widget is selected. If specified as an empty string, no special colour is used for displaying when the widget is selected. .ig .TP .B -selectimage \fIimage\fP Specifies an image to display (in place of the \f5image\fR option) when the radiobutton is selected. This option is ignored unless the \f5image\fR option has been specified. .. .TP .B -state \fIstate\fP Specifies one of three states for the radiobutton: \f5normal\fR, \f5active\fR, or \f5disabled\fR. In normal state the radiobutton is displayed using the \f5foreground\fR and \f5background\fR options. The active state is typically used when the pointer is over the radiobutton. In active state the radiobutton is displayed using the \f5activeforeground\fR and \f5activebackground\fR options. Disabled state means that the radiobutton should be insensitive: the default bindings will refuse to activate the widget and will ignore mouse button presses. In this state the \f5disabledcolor\fR and \f5background\fR options determine how the radiobutton is displayed. .TP .B -value \fIstring\fP Specifies value to store in the button's associated variable whenever this button is selected. .TP .B -variable \fIstring\fP Specifies name of global variable to set whenever this button is selected. Changes in this variable also cause the button to select or deselect itself. Defaults to the value \f5selectedButton\fR. .TP .B -width \fIdist\fP Specifies a desired width for the button. If this option isn't specified, the button's desired width is computed from the size of the image or bitmap or text being displayed in it. .SH DESCRIPTION The \f5radiobutton\fR command creates a new window (given by the \fIpathName\fR argument) and makes it into a radiobutton widget. Additional options, described above, may be specified on the command line to configure aspects of the radiobutton such as its colours, font, text, and initial relief. The \f5radiobutton\fR command returns its \fIpathName\fR argument. At the time this command is invoked, there must not exist a window named \fIpathName\fR. .PP A radiobutton is a widget that displays a textual string, bitmap or image and a circle called an \fIindicator\fR. If text is displayed, it must all be in a single font, but it can occupy multiple lines on the screen (if it contains newlines) and one of the characters may optionally be underlined using the \f5underline\fR option. A radiobutton has all of the behaviour of a simple button: it can display itself in either of three different ways, according to the \f5state\fR option; it can be made to appear raised, sunken, or flat; and it invokes a Tk command whenever mouse button 1 is clicked over the check button. .PP In addition, radiobuttons can be \fIselected\fR. If a radiobutton is selected, the indicator is normally drawn as a circle containing a disc (possibly in a special colour), and a Tk variable associated with the radiobutton is set to a particular value. If the radiobutton is not selected, the indicator is drawn as an empty circle. Typically, several radiobuttons share a single variable and the value of the variable indicates which radiobutton is to be selected. When a radiobutton is selected it sets the value of the variable to indicate that fact; each radiobutton also monitors the value of the variable and automatically selects and deselects itself when the variable's value changes. By default the variable \f5selectedButton\fR is used; its contents give the name of the button that is selected, or the empty string if no button associated with that variable is selected. The name of the variable for a radiobutton, plus the variable to be stored into it, may be modified with options on the command line. Configuration options may also be used to modify the way the indicator is displayed (or whether it is displayed at all). By default a radiobutton is configured to select itself on button clicks. .SH "WIDGET COMMAND" The \f5radiobutton\fR command creates a new Tk command whose name is \fIpathName\fR. This command may be used to invoke various operations on the widget. It has the following general form: .RS .EX \fIpathName option \fR?\fIarg arg ...\fR? .EE .RE \fIOption\fR and the \fIarg\fRs determine the exact behaviour of the command. The following commands are possible for radiobutton widgets: .TP \fIpathName \f5cget\fR \fIoption\fR Returns the current value of the configuration option given by \fIoption\fR. \fIOption\fR may have any of the values accepted by the \f5radiobutton\fR command. .TP \fIpathName \f5configure\fR ?\fIoption\fR? ?\fIvalue option value ...\fR? Query or modify the configuration options of the widget. If no \fIoption\fR is specified, returns a list of all of the available options for \fIpathName\fR. If one or more \fIoption-value\fR pairs are specified, the command modifies the given widget option(s) to have the given value(s); in this case the command returns an empty string. \fIOption\fR may have any of the values accepted by the \f5radiobutton\fR command. .TP \fIpathName \f5deselect\fR Deselects the radiobutton and sets the associated variable to an empty string. If this radiobutton was not currently selected, the command has no effect. .TP \fIpathName \f5invoke\fR Does just what would have happened if the user invoked the radiobutton with the mouse: selects the button and invokes its associated Tk command, if there is one. The return value is the return value from the Tk command, or an empty string if there is no command associated with the radiobutton. This command is ignored if the radiobutton's state is \f5disabled\fR. .TP \fIpathName \f5select\fR Selects the radiobutton and sets the associated variable to the value corresponding to this widget. .SH BINDINGS Tk automatically creates bindings for radiobuttons that give them the following default behaviour: .IP [1] The radiobutton activates whenever the mouse passes over it and deactivates whenever the mouse leaves the radiobutton. .IP [2] When mouse button 1 is pressed over a radiobutton it is invoked (it becomes selected and the command associated with the button is invoked, if there is one). .PP If the radiobutton's state is \f5disabled\fR then none of the above actions occur: the radiobutton is completely non-responsive. .PP The behaviour of radiobuttons can be changed by defining new bindings for individual widgets. .SH SEE ALSO .IR button (9), .IR checkbutton (9), .IR choicebutton (9), .IR options (9), .IR types (9)