ref: a5cb451b299b03f44154fac5780b6a57ca130ce0
dir: /os/ipaq1110/lcd.c/
#include "u.h" #include "mem.h" #include "../port/lib.h" #include "dat.h" #include "draw.h" #include "fns.h" #include "io.h" #include <memdraw.h> #include "screen.h" #define DPRINT if(1)iprint enum { /* lccr0 */ EnableCtlr = 1<<0, /* controller enable */ IsColour = 0<<1, IsMono = 1<<1, SinglePanel = 0<<2, DualPanel = 1<<2, DisableDone = 1<<3, DisableBAU = 1<<4, DisableErr = 1<<5, PassivePanel = 0<<7, ActivePanel = 1<<7, BigEndian = 1<<8, DoublePixel = 1<<9, /* 19:12 is palette dma delay */ /* lcsr */ CtlrReady = 1<<0, /* lccr3 */ VsyncLow = 1<<20, HsyncLow = 1<<21, PixelClockLow = 1<<22, OELow = 1<<23, }; typedef struct { Vdisplay; LCDparam; ushort* palette; uchar* upper; uchar* lower; } LCDdisplay; static LCDdisplay *vd; // current active display void lcd_setcolor(ulong p, ulong r, ulong g, ulong b) { if(vd->pbs == 0 && p > 15 || vd->pbs == 1 && p > 255 || vd->pbs == 2) return; vd->palette[p] = (vd->pbs<<12) | ((r>>(32-4))<<8) | ((g>>(32-4))<<4) | (b>>(32-4)); } static void disablelcd(void) { LcdReg *lcd = LCDREG; int i; /* if LCD enabled, turn off and wait for current frame to end */ if(lcd->lccr0 & EnableCtlr) { lcd->lccr0 &= ~EnableCtlr; for(i=0; i < 50 && !(lcd->lcsr & CtlrReady); i++) delay(5); } } static void setlcdmode(LCDdisplay *vd) { LCDmode *p; int ppf, pclk, clockdiv; ulong v, c; LcdReg *lcd = LCDREG; GpioReg *gpio = GPIOREG; p = (LCDmode*)&vd->Vmode; ppf = ((((p->x+p->sol_wait+p->eol_wait) * (p->mono ? 1 : 3)) >> (3-p->mono)) + p->hsync_wid) * (p->y/(p->dual+1)+p->vsync_hgt+ p->sof_wait+p->eof_wait); pclk = ppf*p->hz; clockdiv = ((m->cpuhz/pclk) >> 1)-2; DPRINT(" oclockdiv=%d\n", clockdiv); clockdiv=0x10; disablelcd(); lcd->lccr0 = 0; /* reset it */ DPRINT(" pclk=%d clockdiv=%d\n", pclk, clockdiv); lcd->lccr3 = (clockdiv << 0) | (p->acbias_lines << 8) | (p->lines_per_int << 16) | VsyncLow | HsyncLow; /* vsync active low, hsync active low */ lcd->lccr2 = (((p->y/(p->dual+1))-1) << 0) | (p->vsync_hgt << 10) | (p->eof_wait << 16) | (p->sof_wait << 24); lcd->lccr1 = ((p->x-16) << 0) | (p->hsync_wid << 10) | (p->eol_wait << 16) | (p->sol_wait << 24); // enable LCD controller, CODEC, and lower 4/8 data bits (for tft/dual) v = p->obits < 12? 0: p->obits < 16? 0x3c: 0x3fc; c = p->obits == 12? 0x3c0: 0; gpio->gafr |= v; gpio->gpdr |= v | c; gpio->gpcr = c; lcd->dbar1 = PADDR(vd->palette); if(vd->dual) lcd->dbar2 = PADDR(vd->lower); // Enable LCD lcd->lccr0 = EnableCtlr | (p->mono?IsMono:IsColour) | (p->palette_delay << 12) | (p->dual ? DualPanel : SinglePanel) | (p->active? ActivePanel: PassivePanel) | DisableDone | DisableBAU | DisableErr; // recalculate actual HZ pclk = (m->cpuhz/(clockdiv+2)) >> 1; p->hz = pclk/ppf; archlcdenable(1); iprint("lccr0=%8.8lux lccr1=%8.8lux lccr2=%8.8lux lccr3=%8.8lux\n", lcd->lccr0, lcd->lccr1, lcd->lccr2, lcd->lccr3); } static LCDdisplay main_display; /* TO DO: limits us to a single display */ Vdisplay* lcd_init(LCDmode *p) { int palsize; int fbsize; vd = &main_display; vd->Vmode = *p; vd->LCDparam = *p; DPRINT("%dx%dx%d: hz=%d\n", vd->x, vd->y, vd->depth, vd->hz); /* */ palsize = vd->pbs==1? 256 : 16; fbsize = palsize*2+(((vd->x*vd->y) * vd->depth) >> 3); if((vd->palette = xspanalloc(fbsize+CACHELINESZ+512, CACHELINESZ, 0)) == nil) /* at least 16-byte alignment */ panic("no vidmem, no party..."); vd->palette[0] = (vd->pbs<<12); vd->palette = minicached(vd->palette); vd->upper = (uchar*)(vd->palette + palsize); vd->bwid = (vd->x << vd->pbs) >> 1; vd->lower = vd->upper+((vd->bwid*vd->y) >> 1); vd->fb = vd->upper; DPRINT(" fbsize=%d p=%p u=%p l=%p\n", fbsize, vd->palette, vd->upper, vd->lower); /* */ setlcdmode(vd); return vd; } void lcd_flush(void) { if(conf.useminicache) minidcflush(); else dcflushall(); /* need more precise addresses */ } void blankscreen(int blank) { if (blank) { disablelcd(); archlcdenable(0); } else { archlcdenable(1); setlcdmode(&main_display); } }