ref: b5bc6572b0a82c52ab04bcf25e1ed76700deb246
dir: /os/manga/archmanga.c/
/* * Manga Balance Plus */ #include "u.h" #include "../port/lib.h" #include "mem.h" #include "dat.h" #include "fns.h" #include "../port/error.h" #include "io.h" #include "../port/netif.h" #include "etherif.h" #include "../port/flashif.h" enum { /* GPIO assignment ... */ Maxmac= 4, /* number of MAC addresses taken from EEPROM */ }; static uchar macaddrs[Maxmac][Eaddrlen] = { [0] {0x00, 0x10, 0xa1, 0x00, 0x10, 0x01}, [1] {0x00, 0x11, 0x6E, 0x00, 0x4A, 0xD4}, [2] {0x00, 0x10, 0xa1, 0x00, 0x20, 0x01}, /* TO DO */ }; void archreset(void) { /* TO DO: set GPIO and other key registers? */ GPIOREG->iopm |= (1<<GPIO_status_orange_o)|(1<<GPIO_status_green_o); GPIOREG->iopm &= ~(1<<GPIO_button_i); GPIOREG->iopd &= ~(1<<GPIO_status_orange_o); GPIOREG->iopd &= ~(1<<GPIO_status_green_o); GPIOREG->iopc |= 0x8888; m->cpuhz = 166000000; /* system clock is 125 = 5*CLOCKFREQ */ m->delayloop = m->cpuhz/1000; /* uartdebuginit(); */ } void ledset(int n) { int s; s = splhi(); if(n) GPIOREG->iopd |= 1<<GPIO_status_green_o; else GPIOREG->iopd &= ~(1<<GPIO_status_green_o); splx(s); } void archconfinit(void) { ulong *p; p = KADDR(PHYSMEMCR+0x30); conf.topofmem = (((p[0]>>22)<<16)|0xFFFF)+1; // w = PMGRREG->ppcr & 0x1f; // m->cpuhz = CLOCKFREQ*(27*2*2); } void archuartpower(int, int) { } void kbdinit(void) { } void archreboot(void) { dcflushall(); GPIOREG->iopd |= 1<<GPIO_status_green_o; GPIOREG->iopd &= ~(1<<GPIO_status_orange_o); // mmuputctl(mmugetctl() & ~CpCaltivec); /* restore bootstrap's vectors */ // RESETREG->rsrr = 1; /* software reset */ for(;;) //spllo(); splhi(); } void archflashwp(Flash*, int) { } /* * for devflash.c:/^flashreset * retrieve flash type, virtual base and length and return 0; * return -1 on error (no flash) */ int archflashreset(int bank, Flash *f) { ulong *p; int w; p = KADDR(PHYSMEMCR+0x10); iprint("Flash %8.8lux %8.8lux %8.8lux\n", p[0], p[1], p[4]); w = p[4]&3; if(bank > 0 || w == 0) return -1; if(w == 3) w = 4; f->type = "cfi8"; f->addr = (void*)FLASHMEM; f->size = 0; f->width = w; f->interleave = 0; return 0; } /* * set ether parameters: the contents should be derived from EEPROM or NVRAM */ int archether(int ctlno, Ether *ether) { ether->nopt = 0; ether->itype = IRQ; switch(ctlno){ case 0: sprint(ether->type, "ks8695"); ether->mem = PHYSWANDMA; ether->port = 0; ether->irq = IRQwmrps; break; case 1: sprint(ether->type, "ks8695"); ether->mem = PHYSLANDMA; ether->port = 1; ether->irq = IRQlmrps; ether->maxmtu = ETHERMAXTU+4; /* 802.1[pQ] tags */ break; case 2: sprint(ether->type, "rtl8139"); ether->mem = 0; ether->port = 0; ether->irq = -1; break; default: return -1; } memmove(ether->ea, macaddrs[ctlno], Eaddrlen); return 1; } /* * TO DO: extract some boot data from user area of flash */ void eepromscan(void) { }