ref: d57b2c66ba189f5bb32dcee6c24942f99e62788e
dir: /external/SDL2/test/acinclude.m4/
# Configure paths for SDL
# Sam Lantinga 9/21/99
# stolen from Manish Singh
# stolen back from Frank Belew
# stolen from Manish Singh
# Shamelessly stolen from Owen Taylor
# serial 1
dnl AM_PATH_SDL([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS
dnl
AC_DEFUN([AM_PATH_SDL2],
[dnl
dnl Get the cflags and libraries from the sdl2-config script
dnl
AC_ARG_WITH(sdl-prefix,[ --with-sdl-prefix=PFX Prefix where SDL is installed (optional)],
sdl_prefix="$withval", sdl_prefix="")
AC_ARG_WITH(sdl-exec-prefix,[ --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)],
sdl_exec_prefix="$withval", sdl_exec_prefix="")
AC_ARG_ENABLE(sdltest, [ --disable-sdltest Do not try to compile and run a test SDL program],
, enable_sdltest=yes)
min_sdl_version=ifelse([$1], ,0.9.0,$1)
if test "x$sdl_prefix$sdl_exec_prefix" = x ; then
PKG_CHECK_MODULES([SDL], [sdl2 >= $min_sdl_version],
[sdl_pc=yes],
[sdl_pc=no])
else
sdl_pc=no
if test x$sdl_exec_prefix != x ; then
sdl_config_args="$sdl_config_args --exec-prefix=$sdl_exec_prefix"
if test x${SDL_CONFIG+set} != xset ; then
SDL_CONFIG=$sdl_exec_prefix/bin/sdl2-config
fi
fi
if test x$sdl_prefix != x ; then
sdl_config_args="$sdl_config_args --prefix=$sdl_prefix"
if test x${SDL_CONFIG+set} != xset ; then
SDL_CONFIG=$sdl_prefix/bin/sdl2-config
fi
fi
fi
if test "x$sdl_pc" = xyes ; then
no_sdl=""
SDL_CONFIG="pkg-config sdl2"
else
as_save_PATH="$PATH"
if test "x$prefix" != xNONE && test "$cross_compiling" != yes; then
PATH="$prefix/bin:$prefix/usr/bin:$PATH"
fi
AC_PATH_PROG(SDL_CONFIG, sdl2-config, no, [$PATH])
PATH="$as_save_PATH"
AC_MSG_CHECKING(for SDL - version >= $min_sdl_version)
no_sdl=""
if test "$SDL_CONFIG" = "no" ; then
no_sdl=yes
else
SDL_CFLAGS=`$SDL_CONFIG $sdl_config_args --cflags`
SDL_LIBS=`$SDL_CONFIG $sdl_config_args --libs`
sdl_major_version=`$SDL_CONFIG $sdl_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
sdl_minor_version=`$SDL_CONFIG $sdl_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
sdl_micro_version=`$SDL_CONFIG $sdl_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
if test "x$enable_sdltest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
ac_save_CXXFLAGS="$CXXFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $SDL_CFLAGS"
CXXFLAGS="$CXXFLAGS $SDL_CFLAGS"
LIBS="$LIBS $SDL_LIBS"
dnl
dnl Now check if the installed SDL is sufficiently new. (Also sanity
dnl checks the results of sdl2-config to some extent
dnl
rm -f conf.sdltest
AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "SDL.h"
char*
my_strdup (char *str)
{
char *new_str;
if (str)
{
new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char));
strcpy (new_str, str);
}
else
new_str = NULL;
return new_str;
}
int main (int argc, char *argv[])
{
int major, minor, micro;
char *tmp_version;
/* This hangs on some systems (?)
system ("touch conf.sdltest");
*/
{ FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); }
/* HP/UX 9 (%@#!) writes to sscanf strings */
tmp_version = my_strdup("$min_sdl_version");
if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
printf("%s, bad version string\n", "$min_sdl_version");
exit(1);
}
if (($sdl_major_version > major) ||
(($sdl_major_version == major) && ($sdl_minor_version > minor)) ||
(($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro)))
{
return 0;
}
else
{
printf("\n*** 'sdl2-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version);
printf("*** of SDL required is %d.%d.%d. If sdl2-config is correct, then it is\n", major, minor, micro);
printf("*** best to upgrade to the required version.\n");
printf("*** If sdl2-config was wrong, set the environment variable SDL_CONFIG\n");
printf("*** to point to the correct copy of sdl2-config, and remove the file\n");
printf("*** config.cache before re-running configure\n");
return 1;
}
}
],, no_sdl=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
CFLAGS="$ac_save_CFLAGS"
CXXFLAGS="$ac_save_CXXFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
if test "x$no_sdl" = x ; then
AC_MSG_RESULT(yes)
else
AC_MSG_RESULT(no)
fi
fi
if test "x$no_sdl" = x ; then
ifelse([$2], , :, [$2])
else
if test "$SDL_CONFIG" = "no" ; then
echo "*** The sdl2-config script installed by SDL could not be found"
echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in"
echo "*** your path, or set the SDL_CONFIG environment variable to the"
echo "*** full path to sdl2-config."
else
if test -f conf.sdltest ; then
:
else
echo "*** Could not run SDL test program, checking why..."
CFLAGS="$CFLAGS $SDL_CFLAGS"
CXXFLAGS="$CXXFLAGS $SDL_CFLAGS"
LIBS="$LIBS $SDL_LIBS"
AC_TRY_LINK([
#include <stdio.h>
#include "SDL.h"
int main(int argc, char *argv[])
{ return 0; }
#undef main
#define main K_and_R_C_main
], [ return 0; ],
[ echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding SDL or finding the wrong"
echo "*** version of SDL. If it is not finding SDL, you'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
[ echo "*** The test program failed to compile or link. See the file config.log for the"
echo "*** exact error that occured. This usually means SDL was incorrectly installed"
echo "*** or that you have moved SDL since it was installed. In the latter case, you"
echo "*** may want to edit the sdl2-config script: $SDL_CONFIG" ])
CFLAGS="$ac_save_CFLAGS"
CXXFLAGS="$ac_save_CXXFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
SDL_CFLAGS=""
SDL_LIBS=""
ifelse([$3], , :, [$3])
fi
AC_SUBST(SDL_CFLAGS)
AC_SUBST(SDL_LIBS)
rm -f conf.sdltest
])
# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-
# serial 1 (pkg-config-0.24)
#
# Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# PKG_PROG_PKG_CONFIG([MIN-VERSION])
# ----------------------------------
AC_DEFUN([PKG_PROG_PKG_CONFIG],
[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
m4_pattern_allow([^PKG_CONFIG(_PATH)?$])
AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
fi
if test -n "$PKG_CONFIG"; then
_pkg_min_version=m4_default([$1], [0.9.0])
AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
PKG_CONFIG=""
fi
fi[]dnl
])# PKG_PROG_PKG_CONFIG
# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
#
# Check to see whether a particular set of modules exists. Similar
# to PKG_CHECK_MODULES(), but does not set variables or print errors.
#
# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
# only at the first occurence in configure.ac, so if the first place
# it's called might be skipped (such as if it is within an "if", you
# have to call PKG_CHECK_EXISTS manually
# --------------------------------------------------------------
AC_DEFUN([PKG_CHECK_EXISTS],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
if test -n "$PKG_CONFIG" && \
AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
m4_default([$2], [:])
m4_ifvaln([$3], [else
$3])dnl
fi])
# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
# ---------------------------------------------
m4_define([_PKG_CONFIG],
[if test -n "$$1"; then
pkg_cv_[]$1="$$1"
elif test -n "$PKG_CONFIG"; then
PKG_CHECK_EXISTS([$3],
[pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`],
[pkg_failed=yes])
else
pkg_failed=untried
fi[]dnl
])# _PKG_CONFIG
# _PKG_SHORT_ERRORS_SUPPORTED
# -----------------------------
AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
_pkg_short_errors_supported=yes
else
_pkg_short_errors_supported=no
fi[]dnl
])# _PKG_SHORT_ERRORS_SUPPORTED
# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
# [ACTION-IF-NOT-FOUND])
#
#
# Note that if there is a possibility the first call to
# PKG_CHECK_MODULES might not happen, you should be sure to include an
# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
#
#
# --------------------------------------------------------------
AC_DEFUN([PKG_CHECK_MODULES],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
pkg_failed=no
AC_MSG_CHECKING([for $1])
_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
_PKG_CONFIG([$1][_LIBS], [libs], [$2])
m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
and $1[]_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.])
if test $pkg_failed = yes; then
AC_MSG_RESULT([no])
_PKG_SHORT_ERRORS_SUPPORTED
if test $_pkg_short_errors_supported = yes; then
$1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1`
else
$1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
m4_default([$4], [AC_MSG_ERROR(
[Package requirements ($2) were not met:
$$1_PKG_ERRORS
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
_PKG_TEXT])dnl
])
elif test $pkg_failed = untried; then
AC_MSG_RESULT([no])
m4_default([$4], [AC_MSG_FAILURE(
[The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
_PKG_TEXT
To get pkg-config, see <http://pkg-config.freedesktop.org/>.])dnl
])
else
$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
$1[]_LIBS=$pkg_cv_[]$1[]_LIBS
AC_MSG_RESULT([yes])
$3
fi[]dnl
])# PKG_CHECK_MODULES