shithub: riscv

ref: 025a2d172ebfe36bc0da32f5712dd250916c73f1
dir: /sys/man/8/usbsdmux/

View raw version
.TH USBSDMUX 8
.SH NAME
usbsdmux \- change mode of a usb-sd-mux device
.SH SYNOPSIS
.B aux/usbsdmux
.I mode
.B [
.I /dev/sdUxxxxx/raw
.B ]
.SH DESCRIPTION
The USB-SD-Mux from Linux Automation GmbH is a device
that can programmatically attach and detach a sd-card
from a device-under-test (DUT), allowing it to be 
re-written from another machine (HOST) without the
need to physically swap the sd-card.
.PP
The
.I mode
can be one of the following:
.TP
off
The sd-card is disconnected from both the HOST and the DUT.
.TP
dut
The sd-card is connected to the DUT and disconnected from
the HOST.
.TP
host
The sd-card is connected to the HOST and disconnected from
the DUT.
.PP
This program uses a vendor-specific SCSI command to change
the mode.
When not specified, it opens
.B /dev/sdUdca10/raw
which is the first USB-SD-Mux device attached to the HOST.
.SH SOURCE
.B /sys/src/cmd/aux/usbsdmux.c
.SH SEE ALSO
.IR nusb (4)
.B https://linux-automation.com/en/products/usb-sd-mux.html