ref: 064a987bd8b3f3172bce73522cab9b21587bbc0e
dir: /sys/src/cmd/python/Doc/mac/libframework.tex/
\section{\module{FrameWork} ---
Interactive application framework}
\declaremodule{standard}{FrameWork}
\platform{Mac}
\modulesynopsis{Interactive application framework.}
The \module{FrameWork} module contains classes that together provide a
framework for an interactive Macintosh application. The programmer
builds an application by creating subclasses that override various
methods of the bases classes, thereby implementing the functionality
wanted. Overriding functionality can often be done on various
different levels, i.e. to handle clicks in a single dialog window in a
non-standard way it is not necessary to override the complete event
handling.
Work on the \module{FrameWork} has pretty much stopped, now that
\module{PyObjC} is available for full Cocoa access from Python, and the
documentation describes only the most important functionality, and not
in the most logical manner at that. Examine the source or the examples
for more details. The following are some comments posted on the
MacPython newsgroup about the strengths and limitations of
\module{FrameWork}:
\begin{quotation}
The strong point of \module{FrameWork} is that it allows you to break
into the control-flow at many different places. \refmodule{W}, for
instance, uses a different way to enable/disable menus and that plugs
right in leaving the rest intact. The weak points of
\module{FrameWork} are that it has no abstract command interface (but
that shouldn't be difficult), that its dialog support is minimal and
that its control/toolbar support is non-existent.
\end{quotation}
The \module{FrameWork} module defines the following functions:
\begin{funcdesc}{Application}{}
An object representing the complete application. See below for a
description of the methods. The default \method{__init__()} routine
creates an empty window dictionary and a menu bar with an apple menu.
\end{funcdesc}
\begin{funcdesc}{MenuBar}{}
An object representing the menubar. This object is usually not created
by the user.
\end{funcdesc}
\begin{funcdesc}{Menu}{bar, title\optional{, after}}
An object representing a menu. Upon creation you pass the
\code{MenuBar} the menu appears in, the \var{title} string and a
position (1-based) \var{after} where the menu should appear (default:
at the end).
\end{funcdesc}
\begin{funcdesc}{MenuItem}{menu, title\optional{, shortcut, callback}}
Create a menu item object. The arguments are the menu to create, the
item title string and optionally the keyboard shortcut
and a callback routine. The callback is called with the arguments
menu-id, item number within menu (1-based), current front window and
the event record.
Instead of a callable object the callback can also be a string. In
this case menu selection causes the lookup of a method in the topmost
window and the application. The method name is the callback string
with \code{'domenu_'} prepended.
Calling the \code{MenuBar} \method{fixmenudimstate()} method sets the
correct dimming for all menu items based on the current front window.
\end{funcdesc}
\begin{funcdesc}{Separator}{menu}
Add a separator to the end of a menu.
\end{funcdesc}
\begin{funcdesc}{SubMenu}{menu, label}
Create a submenu named \var{label} under menu \var{menu}. The menu
object is returned.
\end{funcdesc}
\begin{funcdesc}{Window}{parent}
Creates a (modeless) window. \var{Parent} is the application object to
which the window belongs. The window is not displayed until later.
\end{funcdesc}
\begin{funcdesc}{DialogWindow}{parent}
Creates a modeless dialog window.
\end{funcdesc}
\begin{funcdesc}{windowbounds}{width, height}
Return a \code{(\var{left}, \var{top}, \var{right}, \var{bottom})}
tuple suitable for creation of a window of given width and height. The
window will be staggered with respect to previous windows, and an
attempt is made to keep the whole window on-screen. However, the window will
however always be the exact size given, so parts may be offscreen.
\end{funcdesc}
\begin{funcdesc}{setwatchcursor}{}
Set the mouse cursor to a watch.
\end{funcdesc}
\begin{funcdesc}{setarrowcursor}{}
Set the mouse cursor to an arrow.
\end{funcdesc}
\subsection{Application Objects \label{application-objects}}
Application objects have the following methods, among others:
\begin{methoddesc}[Application]{makeusermenus}{}
Override this method if you need menus in your application. Append the
menus to the attribute \member{menubar}.
\end{methoddesc}
\begin{methoddesc}[Application]{getabouttext}{}
Override this method to return a text string describing your
application. Alternatively, override the \method{do_about()} method
for more elaborate ``about'' messages.
\end{methoddesc}
\begin{methoddesc}[Application]{mainloop}{\optional{mask\optional{, wait}}}
This routine is the main event loop, call it to set your application
rolling. \var{Mask} is the mask of events you want to handle,
\var{wait} is the number of ticks you want to leave to other
concurrent application (default 0, which is probably not a good
idea). While raising \var{self} to exit the mainloop is still
supported it is not recommended: call \code{self._quit()} instead.
The event loop is split into many small parts, each of which can be
overridden. The default methods take care of dispatching events to
windows and dialogs, handling drags and resizes, Apple Events, events
for non-FrameWork windows, etc.
In general, all event handlers should return \code{1} if the event is fully
handled and \code{0} otherwise (because the front window was not a FrameWork
window, for instance). This is needed so that update events and such
can be passed on to other windows like the Sioux console window.
Calling \function{MacOS.HandleEvent()} is not allowed within
\var{our_dispatch} or its callees, since this may result in an
infinite loop if the code is called through the Python inner-loop
event handler.
\end{methoddesc}
\begin{methoddesc}[Application]{asyncevents}{onoff}
Call this method with a nonzero parameter to enable
asynchronous event handling. This will tell the inner interpreter loop
to call the application event handler \var{async_dispatch} whenever events
are available. This will cause FrameWork window updates and the user
interface to remain working during long computations, but will slow the
interpreter down and may cause surprising results in non-reentrant code
(such as FrameWork itself). By default \var{async_dispatch} will immediately
call \var{our_dispatch} but you may override this to handle only certain
events asynchronously. Events you do not handle will be passed to Sioux
and such.
The old on/off value is returned.
\end{methoddesc}
\begin{methoddesc}[Application]{_quit}{}
Terminate the running \method{mainloop()} call at the next convenient
moment.
\end{methoddesc}
\begin{methoddesc}[Application]{do_char}{c, event}
The user typed character \var{c}. The complete details of the event
can be found in the \var{event} structure. This method can also be
provided in a \code{Window} object, which overrides the
application-wide handler if the window is frontmost.
\end{methoddesc}
\begin{methoddesc}[Application]{do_dialogevent}{event}
Called early in the event loop to handle modeless dialog events. The
default method simply dispatches the event to the relevant dialog (not
through the \code{DialogWindow} object involved). Override if you
need special handling of dialog events (keyboard shortcuts, etc).
\end{methoddesc}
\begin{methoddesc}[Application]{idle}{event}
Called by the main event loop when no events are available. The
null-event is passed (so you can look at mouse position, etc).
\end{methoddesc}
\subsection{Window Objects \label{window-objects}}
Window objects have the following methods, among others:
\setindexsubitem{(Window method)}
\begin{methoddesc}[Window]{open}{}
Override this method to open a window. Store the MacOS window-id in
\member{self.wid} and call the \method{do_postopen()} method to
register the window with the parent application.
\end{methoddesc}
\begin{methoddesc}[Window]{close}{}
Override this method to do any special processing on window
close. Call the \method{do_postclose()} method to cleanup the parent
state.
\end{methoddesc}
\begin{methoddesc}[Window]{do_postresize}{width, height, macoswindowid}
Called after the window is resized. Override if more needs to be done
than calling \code{InvalRect}.
\end{methoddesc}
\begin{methoddesc}[Window]{do_contentclick}{local, modifiers, event}
The user clicked in the content part of a window. The arguments are
the coordinates (window-relative), the key modifiers and the raw
event.
\end{methoddesc}
\begin{methoddesc}[Window]{do_update}{macoswindowid, event}
An update event for the window was received. Redraw the window.
\end{methoddesc}
\begin{methoddesc}{do_activate}{activate, event}
The window was activated (\code{\var{activate} == 1}) or deactivated
(\code{\var{activate} == 0}). Handle things like focus highlighting,
etc.
\end{methoddesc}
\subsection{ControlsWindow Object \label{controlswindow-object}}
ControlsWindow objects have the following methods besides those of
\code{Window} objects:
\begin{methoddesc}[ControlsWindow]{do_controlhit}{window, control,
pcode, event}
Part \var{pcode} of control \var{control} was hit by the
user. Tracking and such has already been taken care of.
\end{methoddesc}
\subsection{ScrolledWindow Object \label{scrolledwindow-object}}
ScrolledWindow objects are ControlsWindow objects with the following
extra methods:
\begin{methoddesc}[ScrolledWindow]{scrollbars}{\optional{wantx\optional{,
wanty}}}
Create (or destroy) horizontal and vertical scrollbars. The arguments
specify which you want (default: both). The scrollbars always have
minimum \code{0} and maximum \code{32767}.
\end{methoddesc}
\begin{methoddesc}[ScrolledWindow]{getscrollbarvalues}{}
You must supply this method. It should return a tuple \code{(\var{x},
\var{y})} giving the current position of the scrollbars (between
\code{0} and \code{32767}). You can return \code{None} for either to
indicate the whole document is visible in that direction.
\end{methoddesc}
\begin{methoddesc}[ScrolledWindow]{updatescrollbars}{}
Call this method when the document has changed. It will call
\method{getscrollbarvalues()} and update the scrollbars.
\end{methoddesc}
\begin{methoddesc}[ScrolledWindow]{scrollbar_callback}{which, what, value}
Supplied by you and called after user interaction. \var{which} will
be \code{'x'} or \code{'y'}, \var{what} will be \code{'-'},
\code{'--'}, \code{'set'}, \code{'++'} or \code{'+'}. For
\code{'set'}, \var{value} will contain the new scrollbar position.
\end{methoddesc}
\begin{methoddesc}[ScrolledWindow]{scalebarvalues}{absmin, absmax,
curmin, curmax}
Auxiliary method to help you calculate values to return from
\method{getscrollbarvalues()}. You pass document minimum and maximum value
and topmost (leftmost) and bottommost (rightmost) visible values and
it returns the correct number or \code{None}.
\end{methoddesc}
\begin{methoddesc}[ScrolledWindow]{do_activate}{onoff, event}
Takes care of dimming/highlighting scrollbars when a window becomes
frontmost. If you override this method, call this one at the end of
your method.
\end{methoddesc}
\begin{methoddesc}[ScrolledWindow]{do_postresize}{width, height, window}
Moves scrollbars to the correct position. Call this method initially
if you override it.
\end{methoddesc}
\begin{methoddesc}[ScrolledWindow]{do_controlhit}{window, control,
pcode, event}
Handles scrollbar interaction. If you override it call this method
first, a nonzero return value indicates the hit was in the scrollbars
and has been handled.
\end{methoddesc}
\subsection{DialogWindow Objects \label{dialogwindow-objects}}
DialogWindow objects have the following methods besides those of
\code{Window} objects:
\begin{methoddesc}[DialogWindow]{open}{resid}
Create the dialog window, from the DLOG resource with id
\var{resid}. The dialog object is stored in \member{self.wid}.
\end{methoddesc}
\begin{methoddesc}[DialogWindow]{do_itemhit}{item, event}
Item number \var{item} was hit. You are responsible for redrawing
toggle buttons, etc.
\end{methoddesc}