ref: 0d6153841d81c5a7b7c850f1ee63677ec493b227
dir: /sys/lib/ghostscript/pdf_font.ps/
% Copyright (C) 1994, 2000 Aladdin Enterprises. All rights reserved.
%
% This software is provided AS-IS with no warranty, either express or
% implied.
%
% This software is distributed under license and may not be copied,
% modified or distributed except as expressly authorized under the terms
% of the license contained in the file LICENSE in this distribution.
%
% For more information about licensing, please refer to
% http://www.ghostscript.com/licensing/. For information on
% commercial licensing, go to http://www.artifex.com/licensing/ or
% contact Artifex Software, Inc., 101 Lucas Valley Road #110,
% San Rafael, CA 94903, U.S.A., +1(415)492-9861.
% $Id: pdf_font.ps,v 1.80 2005/09/29 15:24:53 leonardo Exp $
% PDF font operations.
% Finding a font by name can't give a proper result when PDF font names aren't unique.
% But it is only the way to obtain a font in Postscript after a font file is executed.
% Therefore using a FontName (and findfont) is allowed only
% immediately after a font file is executed.
% In all other cases the font to be found by a pointer through PDF structures.
%
% This ideal logics can't work for documents,
% which define a font resource with an embedded font,
% and another font resource with same BaseFont but with no embedded font
% (and possibly with no font descriptor).
% Our testbase does contain such examples.
% In this case we do find font by FontName (with findfont),
% since there is no other way to get a reasonable result.
/.setlanguagelevel where { pop 2 .setlanguagelevel } if
.currentglobal true .setglobal
/pdfdict where { pop } { /pdfdict 100 dict def } ifelse
GS_PDF_ProcSet begin
pdfdict begin
% We cache the PostScript font in an additional element of the
% font resource dictionary, called PSFont.
% ---------------- Encodings ---------------- %
/.notdefEncoding 256 { /.notdef } repeat 256 packedarray def
% Apply a list of differences to an Encoding.
% Note that the differences may cause the array to grow.
/updateencoding { % <encoding|null> <differences> updateencoding <enc'>
% Calculate the length of the result.
% in case the incoming Encoding is null, use .notdefEncoding
exch dup null eq { pop .notdefEncoding } if
0 0 3 index {
dup type /nametype ne { exch pop oforce } { pop 1 add } ifelse
% Differences list may not be in order, update the largest_index
% stack: <Differences> <encoding> <largest_index> <at_index>
2 copy lt { exch pop dup } if % at_index is new largest
} forall
pop 1 index length .max array dup 0 4 -1 roll putinterval
exch 0 exch {
% Stack: enc' code element
dup type /nametype ne
{ exch pop oforce }
{ 3 copy put pop 1 add }
ifelse
} forall pop
} bdef
% Get the Encoding for a font.
/getencoding % <base-encoding> <font-resource> getencoding <enc>
{ /Encoding knownoget
{ dup type /nametype eq
{
% The published PDF specification says the Encoding name
% "must be" one of the 3 predefined Encodings, implying
% that an error should occur if it isn't. However, Acrobat
% Reader simply ignores unknown names, and since there are
% some buggy applications that rely on this, we do the same.
dup dup dup /MacRomanEncoding eq
exch /MacExpertEncoding eq or
exch /WinAnsiEncoding eq or
{ exch pop findencoding
}
{ pop
}
ifelse
}
{ dup /BaseEncoding knownoget
{
dup / eq
{ pop
( **** Warning: Ignoring bad BaseEncoding name.\n) pdfformaterror
% as found in a PDF file from J.D.Edwards OneWorld (B7333), bug 687786
}
{
findencoding 3 -1 roll pop exch
}
ifelse
}
if
/Differences knownoget { updateencoding } if
}
ifelse
}
if
} bdef
/checkGlyphNames2Unicode % <dict> checkGlyphNames2Unicode -
{
PDFDEBUG {
dup /FontInfo .knownget {
/GlyphNames2Unicode .knownget {
(Has GlyphNames2Unicode) =
pop % { exch == ==} forall
} if
} if
} if
pop
} bind def
% Define a font using it's FontName as the key.
% Adjust a font according to the Encoding and Widths in the font resource.
/adjustfont { % <font-resource> <font> adjustfont <font'>
getfontencoding
3 copy .processToUnicode
getfontmetrics 5 -1 roll pop .updatefont { dup /FontName get exch definefont } if
} bind def
% Get the (possibly modified) encoding of a font.
/getfontencoding { % <font-resource> <font> getfontencoding
% <font-resource> <font> <Encoding|null>
1 index /Encoding known {
dup /Encoding knownoget { 2 index getencoding } { null } ifelse
} {
null
} ifelse
} bdef
% Returns true if the current glyph is in the Differences array at
% the specified index value. This is needed because the Widths
% array may map to the same glyph at different positions from the
% Encoding. We want to use the Width that was associated with the
% one specified in the Encoding::Differences list.
/match_in_diff % <Differences> <index> <glyphname> match_in_diff <bool>
{ false 4 1 roll 0 4 -1 roll % stack: false index glyphname at_index==0 Differences
{ exch 1 index type /nametype ne {
% stack: false index glyphname Diff_element at_index
pop % Diff_element is new at_index
} {
% stack: false index glyphname Diff_element at_index
exch 2 index eq {
% stack: false index glyphname at_index
dup 3 index eq {
true 5 1 roll % stack: true false index glyphname at_index
pop exit
} if
} if
1 add % at_index++ stack: false index glyphname at_index'
} ifelse
} forall
% stack: true false index glyphname
% or : false index glyphname at_index
pop pop pop
} bdef
/unique_name { % <dict> </root> unique_name </unique>
%
% Note : this function interacts with pdf_write_encoding in src/gdevpdtw.c
% and with copied_drop_extension_glyphs in src\gxfcopy.c
% by adding a reserved substring (~GS~).
%
.namestring % <<>> (root)
0 1 65535 {
5 string cvs % <<>> (root) (0)
(~GS~) exch concatstrings
1 index exch % <<>> (root) (root) (~GS~0)
concatstrings % <<>> (root) (root~GS~0)
dup % <<>> (root) (root~GS~0) (root~GS~0)
3 index exch % <<>> (root) (root~GS~0) <<>> (root~GS~0)
known not {
exch pop exit % <<>> (root~GS~0)
} if
pop
} for
exch pop cvn % /root0
} bdef
% Get the metrics of a font, if specified.
/getfontmetrics { % <font-resource> <font> <Encoding|null> getfontmetrics
% <font-resource> <font> <Encoding|null>
% <Metrics|null> <GlyphMap|null>
2 index /Widths known {
dup null eq { pop dup /Encoding get } if
4 dict begin
dup length dict
/Metrics exch def
/Encoding exch def
/GlyphMap //null def
exch
dup /Widths oget /Widths exch def
% Stack: font font-res
% Note that widths are always based on a 1000-unit
% character space, but the FontMatrix may specify
% some other scale factor. Compensate for this here,
% by scaling the Widths if necessary.
0.001 2 index /FontMatrix get 0 get div
% Stack: font font-res mscale
1 index /FirstChar oget dup 1 4 index /LastChar oget
{ % Stack: font font-res mscale first-char index
Encoding 1 index dup 2 index length ge {
( **** Warning: Font Encoding array size is smaller than character range.\n)
pdfformaterror
pop pop /.notdef
} {
get
} ifelse
Widths 2 index 4 index sub dup 2 index length ge {
( **** Warning: Font Widths array size is smaller than character range.\n)
pdfformaterror
% use MissingWidth if it's available, if not, default to 1000 (full width)
pop pop 4 index /FontDescriptor knownoget {
/MissingWidth knownoget not { 1000 } if
} { 1000 } ifelse
} {
oget
} ifelse
% Stack: font font-res mscale first-char index charname width
4 index mul
% The following 'loop' is only context for 'exit'.
{
% Work around a bug in pdfTeX, which can generate Encoding
% vectors containing nulls :
1 index //null eq { exit } if
Metrics 2 index .knownget {
1 index ne
} {
//false
} ifelse {
% Two or more Encoding elements refer same glyph name,
% and Widths specify different wihts for it.
% Since a Postscript font can't have different
% Metrics for same glyph name,
% we generate an unique name, and create a new
% Charstrings entry with same glyph value.
GlyphMap //null eq {
/Encoding Encoding dup length array copy def
/GlyphMap 4 dict def
} if
% To prevent too many new names, check whether
% we can use one already created for same glyph.
//true
GlyphMap { % f r s c i n w b n1 n2
4 index eq { % f r s c i n w b n1
dup Metrics exch get % f r s c i n w b n1 w1
3 index eq { % f r s c i n w b n1
4 3 roll pop % f r s c i w b n1
3 1 roll pop % f r s c i n1 w
Encoding 3 index 3 index put
//false % f r s c i n1 w b
exit
} {
pop
} ifelse
} { % f r s c i n w b n1
pop
} ifelse
} forall % f r s c i n w b
{ % Do create a new name.
Metrics 2 index //unique_name exec % f r s c i n w nn
Encoding 4 index 2 index put
GlyphMap 1 index 5 -1 roll put % f r s c i w nn
exch
% Stack: font font-res mscale first-char index new_name width
} if
} if
2 copy Metrics 3 1 roll put
exit
} loop
pop pop pop
}
for pop
% Now fill in the MissingWidth for any encoded characters
% that aren't in Metrics already. Note that built-in
% fonts may have Widths/FirstChar/LastChar but no
% FontDescriptor, so we must check for this.
% Stack: font font-res mscale
1 index /FontDescriptor knownoget {
Metrics exch
/MissingWidth knownoget { 2 index mul } { 0 } ifelse exch
Encoding {
% Stack: font font-res mscale missing-width metrics charname
% Work around the abovementioned pdfTeX bug.
dup //null ne {
2 copy known not { 2 copy 4 index put } if pop
} {
pop
} ifelse
} forall pop pop pop
} {
pop
} ifelse
exch Encoding Metrics GlyphMap end
} {
//null //null
} ifelse
} bdef
currentdict /unique_name undef
currentdict /match_in_diff undef
/ToUnicodeCMapReader 3 dict def
//ToUnicodeCMapReader begin
/defineresource % <name> <dict> <cat-name> defineresource <dict>
{
pop
dup userdict exch /.lastToUnicode exch put
exch pop
} bind def
/CIDSystemInfo
{
( **** Warning: ToUnicode CMap has invalid syntax near CIDSystemInfo.\n) pdfformaterror
/CIDSystemInfo
} bind def % A work around a bug in Altona.Page_3.2002-09-27.pdf - a slash is missed.
end
/string2number % <string> string2number <number>
{ 0 exch dup 0 exch 1 exch length 1 sub { % n () i
1 index exch get % n () v
3 2 roll 256 mul add exch % v+n*256 ()
} for
pop % N
} bind def
/copy&def % <key> <value> <bool> copy&def -
{
{ true
} {
currentdict gcheck {
dup gcheck not
} {
false
} ifelse
} ifelse
{ currentglobal currentdict gcheck setglobal
exch dup length string copy exch
setglobal
} if
def
} bind def
/.convert_ToUnicode-into-g2u % <GlyphNames2Unicode> <Encoding|null> <CMap> .convert_ToUnicode-into-g2u -
{
PDFDEBUG {
(.convert_ToUnicode-into-g2u beg) =
} if
3 2 roll begin
/.CodeMapData get % About the data format see gs_cmap.ps, the comment after "CMap operators".
1 get % code maps
{
PDFDEBUG {
dup ==
} if
dup length 1 sub 0 exch 5 exch { % e [] i
2 copy get % e [] i (prefix)
string2number % e [] i prefix
2 index 2 index 1 add get % e [] i prefix (key_size,?is_range,value_type,value_size)
dup 0 get 8 mul % e [] i prefix (key_size,?is_range,value_type,value_size) key_size*8
3 2 roll exch bitshift exch % e [] i prefix<<key_size*8 (key_size,?is_range,value_type,value_size)
dup 0 get exch 3 get % e [] i offset key_size value_size
4 index 4 index 2 add get % e [] i offset key_size value_size (keys)
5 index 5 index 3 add get % e [] i offset key_size value_size (keys) (values)
PDFDEBUG {
( offset=) print 4 index =string cvs print
( key_size=) print 3 index =string cvs print
( value_size=) print 2 index =
( keys=) print 1 index ==
( values=) print dup ==
} if
1 index length 0 eq {
% A single pair.
exch pop exch pop exch pop exch % e [] i (values) offset
4 index null ne {
4 index exch get
} if % e [] i (values) cid|name
exch
PDFDEBUG {
( defined single: ) print 1 index =string cvs print ( ) print dup ==
} if
false copy&def % e [] i
pop % e []
} {
% A range. % e [] i offset key_size value_size (keys) (values)
dup length string copy % protect the original string from modifications below.
0 4 index 2 mul 3 index length 1 sub { % e [] i offset key_size value_size (keys) (values) j
2 index 1 index 6 index getinterval
string2number % e [] i offset key_size value_size (keys) (values) j keyL
PDFDEBUG {
( keyL=) print dup =string cvs print
} if
3 index 2 index 7 index add 7 index getinterval
string2number % e [] i offset key_size value_size (keys) (values) j keyL keyH
PDFDEBUG {
( keyH=) print dup =
} if
3 2 roll 6 index idiv 5 index mul % e [] i offset key_size value_size (keys) (values) keyL keyH J
3 index exch 6 index getinterval % e [] i offset key_size value_size (keys) (values) keyL keyH (valueL)
3 1 roll 1 exch { % e [] i offset key_size value_size (keys) (values) (value) k
9 index null ne {
9 index exch get % e [] i offset key_size value_size (keys) (values) (value) name
} if % e [] i offset key_size value_size (keys) (values) (value) cid|name
1 index % e [] i offset key_size value_size (keys) (values) (value) cid|name (value)
PDFDEBUG {
( defined from range: ) print 1 index =string cvs print ( ) print dup ==
} if
true copy&def % e [] i offset key_size value_size (keys) (values) (value)
% Assuming the lowest byte of 'value' changes, others don't.
dup dup length 1 sub % e [] i offset key_size value_size (keys) (values) (value) (value) l
2 copy get % e [] i offset key_size value_size (keys) (values) (value) (value) l v
1 add put % e [] i offset key_size value_size (keys) (values) (value')
} for % e [] i offset key_size value_size (keys) (values) (value)
} for
pop pop pop pop pop pop pop % e []
} ifelse
} for
pop % e
} forall
end
pop %
PDFDEBUG {
(.convert_ToUnicode-into-g2u end) =
} if
} bind def
/.processToUnicode % <font-resource> <font-dict> <encoding|null> .processToUnicode -
{
% Currently pdfwrite is only device which can handle GlyphNames2Unicoide to
% generate a ToUnicode CMaps. So don't bother with other devices.
currentdevice .devicename /pdfwrite eq {
PDFDEBUG {
(.processToUnicode beg) =
} if
2 index /ToUnicode knownoget {
dup type /nametype eq {
% Bug687351.pdf defines /ToUnicode /Identity-H, what is incorrect.
( **** Warning: Ignoring bad ToUnicode CMap.\n) pdfformaterror
pop
} {
PDFfile fileposition exch
false resolvestream
//ToUnicodeCMapReader begin
cvx exec
end
PDFfile exch setfileposition
1 index /FontInfo .knownget not {
1 index /FontInfo 5 dict dup 4 1 roll put
} if
dup /GlyphNames2Unicode .knownget not {
currentglobal exch dup gcheck setglobal
dup /GlyphNames2Unicode 100 dict dup 4 1 roll .forceput
3 2 roll setglobal
} if % font-res font-dict encoding|null font-info g2u
exch pop exch % font-res font-dict g2u encoding|null
userdict /.lastToUnicode get % font-res font-dict g2u Encoding|null CMap
.convert_ToUnicode-into-g2u % font-res font-dict
null % font-res font-dict null
} ifelse
} if
PDFDEBUG {
(.processToUnicode end) =
} if
} if
pop pop pop
} bind def
% ---------------- Descriptors ---------------- %
% Partial descriptors for the 14 built-in fonts. Note that
% from PDF 1.1 to PDF 1.2, the meaning of the Flag 6 in the FontDescriptor
% object has undergone a subtle change in its meaning which has serious
% consequences for searching with Acrobat:
% In PDF 1.1, the flag meant: Font has StandardEncoding
% In PDF 1.2, the flag means: Font has (subset of) StandardRomanCharacterSet
/standardfontdescriptors mark
/Courier mark /Flags 16#23 .dicttomark
/Courier-Oblique 1 index
/Courier-Bold 1 index
/Courier-BoldOblique 1 index
/Helvetica mark /Flags 16#20 .dicttomark
/Helvetica-Oblique 1 index
/Helvetica-Bold 1 index
/Helvetica-BoldOblique 1 index
/Times-Roman mark /Flags 16#22 .dicttomark
/Times-Bold 1 index
/Times-Italic mark /Flags 16#62 .dicttomark
/Times-BoldItalic 1 index
/Symbol mark /Flags 16#4 .dicttomark
/ZapfDingbats 1 index
.dicttomark readonly def
% ---------------- Utilities ---------------- %
/.pdforigfontcache_g 20 dict def
currentglobal false setglobal
systemdict /.pdforigfontcache_l 20 dict .forceput
setglobal
% Find an original font, using cache to prevent adjustfont to accumulate changes.
/pdffindcachedfont { % <font_name> pdffindcachedfont <font>
dup //.pdforigfontcache_g exch .knownget {
exch pop
} {
dup .pdforigfontcache_l exch .knownget {
exch pop
} {
dup findfont dup
dup gcheck { //.pdforigfontcache_g } { .pdforigfontcache_l } ifelse
% Stack : font_name font font cache
4 2 roll .growput
} ifelse
} ifelse
} bind def
% Add original font to cache to prevent adjustfont to accumulate changes.
/pdfaddcachedfont { % <font_name> pdfaddcachedfont <font>
dup findfont dup % name font font
dup gcheck { //.pdforigfontcache_g } {.pdforigfontcache_l} ifelse
4 2 roll % font d name font
put % font
} bind def
/.remove_font_name_prefix { % <name> .remove_font_name_prefix <name>
dup .namestring (+) search {
true exch
{ dup 65 lt exch 90 gt or {
pop false exit
} if
} forall
{ pop exch pop cvn
} {
pop pop
} ifelse
} {
pop
} ifelse
} bind def
% Find a font (except for embedded ones), and adjust its encoding if necessary.
/.pdfdfndict mark
/defaultfontname /Helvetica
.dicttomark readonly def
/pdffindfont { % <font-resource> <fontname> pdffindfont <font>
% If the font isn't available, synthesize one based on
% its descriptor.
dup /Font resourcestatus {
pop pop pdffindcachedfont
} {
1 index /FontDescriptor knownoget {
% Stack: font-res fontname fontdesc
dup /Flags oget
dup 16#40 and -6 bitshift % 1, oblique/italic
1 index 16#40000 and -17 bitshift add % 2, bold
exch 16#2 and 2 bitshift add % 8, serif
% We should look at the fixed flag, too.
% Stack: font-res fontname fontdesc properties
% Even though /FontName is a required key in FontDescriptor dict
% (As of the PDF 1.4 Reference Manual), In the case of missing
% /FontName key, we substitue /BaseFont for the value of /FontName.
% Yet another case of broken PDF's that Adobe Reader accepts.
1 index dup /FontName known {
/FontName oget
} {
( **** FontDescriptor missing required /FontName key. BaseFont name used.\n)
pdfformaterror
pop 2 index % grab the BaseFont from the stack.
} ifelse
.remove_font_name_prefix
exch
% Analyzes font name and extract "Narrow" property
% which is not described by the FontDescriptor Flags.
0 2 index .fontnameproperties 4 and or
% Rebind the default font name to Helvetica so that
% fonts with no properties are handled correctly.
//.pdfdfndict begin .substitutefontname end
% Stack: font-res fontname fontdesc substname|null
Fontmap 1 index known not {
% No available good substitution, use the standard one.
pop 1 index .substitutefont
} if
dup 3 index ne QUIET not and {
(Substituting font ) print dup =only
( for ) print 2 index =only (.) = flush
} if
pdffindcachedfont
% Stack: font-res fontname fontdesc font
% If this is a small-caps font, replace the CharString
% entries for a..z.
exch /Flags oget 16#20000 and 0 ne {
true .copyfontdict
dup /CharStrings 2 copy get dup length dict .copydict
% stack: font-res fontname font font /CharStrings CharStringsdict
5 index /FirstChar get 97 .max
6 index /LastChar get 122 .min 1 exch {
% Stack: font-res fontname font' font' /CharStrings charstrings code
% Note that this only remaps a-z, not accented characters.
6 index /Widths oget 1 index 8 index /FirstChar get sub oget
1 string dup 0 5 -1 roll put
% Stack: font-res font' font' /CharStrings charstrings code
% width (x)
2 index exch dup cvn exch
dup 0 2 copy get 32 sub put 4 -1 roll {
% Stack: operand (X) width
0 setcharwidth exch pop
currentfont /FontMatrix get matrix invertmatrix concat
0.7 dup scale 0 0 moveto show
} /exec cvx 4 packedarray cvx put
} for put
} if
dup /FontName get 2 index ne {
true .copyfontdict
2 copy exch /FontName exch put
} if
definefont
} {
% No descriptor available, use the default algorithm.
pdffindcachedfont
} ifelse
} ifelse
exch pop
} bdef
% ---------------- Type 1 fonts ---------------- %
/buildType1 % <Type1-font-resource> buildType1 <font>
{ dup /BaseFont get pdffindfont
} bdef
% The state dictionary for the embedded Type 1 font reading procedure
% has the following keys and values:
% data - stream (filter)
% buffer, buffer2 - string
% hexify - procedure to convert buffer to hex if needed
% leftstr - string containing (non-negative) integer
% sectionstr - string containing a character 0 .. 3
% stream - (stream) dictionary
% proc - procedure of the form {-dict- type1read}
% pfbhdr - string containing 16#80 if PFB, 0 otherwise
% When the procedure is executing, this dictionary is current.
% leftstr and sectionstr are strings so that we can change their values
% reliably in case the font executes a restore!
% We also have to do something special about embedded fonts that
% execute definefont more than once -- that is the function of topFontDict.
% Read an embedded Type 1 font.
/readfontfilter { % <proc> readfontfilter <filter>
0 () /SubFileDecode filter
} bdef
/readtype1dict 5 dict dup begin
/definefont {
dup topFontDict eq topFontDict null eq or {
dup wcheck not { dup length dict copy } if
exch pop savedFontName exch
} if
//systemdict /definefont get exec
} bdef
/eexec {
% Assume the font dictionary is directly below the file on the stack
count 0 gt { /topFontDict 2 index cvlit store } if
//.eexec_param_dict /eexecDecode filter
//systemdict begin readtype1dictcopy begin cvx stopped
currentdict readtype1dictcopy eq { end } if
currentdict //systemdict eq { end } if
{ stop } if
} bdef
/undef_proc_warning {
/Repaired true store % flag that we have warnings
UndefProcList exch 2 copy .knownget { 1 add } { 1 } ifelse put
} bdef
/-| { string currentfile exch readstring pop /-| undef_proc_warning } executeonly bdef
/RD { string currentfile exch readstring pop /RD undef_proc_warning } executeonly bdef
/|- { noaccess def /|- undef_proc_warning } executeonly bdef
/ND { noaccess def /ND undef_proc_warning } executeonly bdef
/| { noaccess put /| undef_proc_warning } executeonly bdef
/NP { noaccess put /NP undef_proc_warning } executeonly bdef
end readonly def
/readtype1 { % <font-resource> <stream-dict> readtype1 <font>
% Read the definition, using a procedure-based filter
% that turns binary/hex conversion on and off
% at the right times.
1 index exch
PDFfile fileposition 3 1 roll
11 dict begin
/leftstr ( ) 10 string copy def
dup /Length1 oget leftstr cvs pop
/sectionstr <00> 1 string copy def
/pfbhdr <00> 1 string copy def
/stream 1 index def
true resolvestream /data exch def
/buffer 1000 string def % arbitrary
/buffer2 buffer length 2.1 div cvi 1 sub string def
/hexify /buf2hex load def
currentdict end
/type1read cvx 2 array astore cvx dup 0 get /proc 2 index put
readfontfilter
% Some buggy embedded fonts leave extra junk on the stack,
% so we have to make a closure that records the stack depth
% in a fail-safe way. Also restore dictstack depth.
//systemdict begin
% The PDF specification is somewhat muddy about whether
% an embedded font's name is supposed to be the BaseFont
% from the Font object or the FontName from the descriptor.
% Acrobat Distiller requires the former. Save away the
% name so we can substitute it at definefont time.
//readtype1dict dup length 3 add dict copy begin
1 index /BaseFont oget /savedFontName exch def
/topFontDict null def
/readtype1dictcopy currentdict def
{ run } aload pop count 1 sub 2 packedarray cvx exec
% clean up the dictstack
{ currentdict /topFontDict known not { end } { end end exit } ifelse } loop
count exch sub { pop } repeat
PDFfile 3 -1 roll setfileposition
/BaseFont oget pdfaddcachedfont
exch pop
} bdef
% Execute the appropriate reading procedure.
/type1read % <dict> type1read <string>
{ begin leftstr cvi
{ type1read0 type1read1 type1read2 type1read3 } sectionstr 0 get get exec
( ) leftstr copy cvs pop end
} bdef
% Read the next block of data into the buffer.
/type1readdata % <left> <buffer> type1readdata <substring> <left'>
{ 0 2 index 2 index length .min getinterval
% Adobe requires readstring to signal an error if given
% an empty string. Work around this nonsense here.
dup length 0 ne { data exch readstring pop } if
dup length 3 -1 roll exch sub
PDFDEBUG
{ dup =only ( read ) print
1 index length =only (: ) print
1 index == flush
} if
} bdef
% Read the initial byte to see if we need to skip a 6 byte PFB header
/type1read0 { % <left> type1read0 <string> <left'>
sectionstr 0 1 put % either way we go to the next stage
pfbhdr type1readdata
1 index 0 get 16#80 eq {
( **** Warning: Embedded Type1 font in PFB format is not valid PDF.\n)
pdfformaterror
PDFDEBUG { (skipping PFB header) = flush } if
exch pop buffer 0 5 getinterval type1readdata exch
dup 4 get 256 mul 1 index 3 get add 256 mul
1 index 2 get add 256 mul 1 index 1 get add
PDFDEBUG { (PFB segment length = ) print dup = } if
exch pop % discard the string keeping the PFB segment length
2 copy ne {
( **** Warning: Type 1 PFB segment length and Length 1 value do not match.\n)
pdfformaterror
exch % keep the PFB length instead
} if
pop
buffer type1readdata % go ahead and read a block
}
if % if not PFB, return pfbhdr string (first char of file, usually %).
} bdef
% Read the next block of the initial text portion.
/type1read1 { % <left> type1read1 <string> <left'>
PDFDEBUG { (read1 ) print } if
dup 0 eq {
pop sectionstr 0 2 put
stream /Length2 oget
% Determine whether to hexify data for eexec.
dup 8 lt {
type1read2 % Hexify.
} {
PDFDEBUG { (read2 ) print } if
pfbhdr 0 get 16#80 eq {
% eat 6 more bytes of PFB junk before proceeding
PDFDEBUG { (skipping PFB header in segment 2) = flush } if
buffer 0 6 getinterval type1readdata exch
dup 5 get 256 mul 1 index 4 get add 256 mul
1 index 3 get add 256 mul 1 index 2 get add
PDFDEBUG { (PFB segment length = ) print dup = } if
exch pop % discard the string keeping the PFB segment length
2 copy ne {
( **** Warning: Type 1 PFB segment length and Length 2 value do not match.\n)
pdfformaterror
exch % keep the PFB length instead
} if
pop
} if
buffer2 type1readdata exch
% The check doesn't have to be 100% accurate:
% hexifying is always OK.
dup 0 8 getinterval 0 exch { or } forall
128 ge {
/hexify { } store
/buffer2 buffer def % We don't need an intermediate buffer.
} if hexify exch
} ifelse
} {
buffer type1readdata
} ifelse
} bdef
% Convert a string from binary to hex for eexec.
% Free variables: buffer.
/buf2hex { % <string> buf2hex <hexstring>
buffer /ASCIIHexEncode filter dup 3 -1 roll writestring closefile
buffer (>) search pop exch pop exch pop
} bdef
% Read the next block of the encrypted portion.
/type1trailer
(0000000000000000000000000000000000000000000000000000000000000000\n\
0000000000000000000000000000000000000000000000000000000000000000\n\
0000000000000000000000000000000000000000000000000000000000000000\n\
0000000000000000000000000000000000000000000000000000000000000000\n\
0000000000000000000000000000000000000000000000000000000000000000\n\
0000000000000000000000000000000000000000000000000000000000000000\n\
0000000000000000000000000000000000000000000000000000000000000000\n\
0000000000000000000000000000000000000000000000000000000000000000\n\
cleartomark\n)
readonly def
/type1read2 { % <left> type1read2 <string> <left'>
PDFDEBUG { (read2 ) print } if
dup 0 eq
{ pop sectionstr 0 3 put
stream /Length3 oget
dup 0 eq
{ PDFDEBUG { (trailer ) print } if
type1trailer exch
}
{
pfbhdr 0 get 16#80 eq {
% eat 6 more bytes of PFB junk before proceeding
PDFDEBUG { (skipping PFB header in segment 3) = flush } if
buffer 0 6 getinterval type1readdata exch
dup 5 get 256 mul 1 index 4 get add 256 mul
1 index 3 get add 256 mul 1 index 2 get add
PDFDEBUG { (PFB segment length = ) print dup = } if
exch pop % discard the string keeping the PFB segment length
2 copy ne {
( **** Warning: Type 1 PFB segment length and Length 3 value do not match.\n)
pdfformaterror
exch % keep the PFB length instead
} if
pop
} if
type1read3
}
ifelse
}
{ buffer2 type1readdata exch hexify exch
}
ifelse
} bdef
% Read the next block of the final text portion.
% When finished, this procedure returns an empty string.
/type1read3 % <left> type1read3 <string> <left'>
{ PDFDEBUG { (read3 ) print } if
buffer type1readdata
} bdef
% ---------------- Type 3 fonts ---------------- %
/buildType3 { % <Type3-font-resource> buildType3 <font>
8 dict begin
/FontType 3 def
% If the font does not contain a Resources entry, then we use
% the resources from our current context. Page 391 of the PDF
% 1.6 spec says that the Resources dict is optional and if not
% present then we should use the Resources for the page.
% However we have a test file (687989) which uses a Type3 font
% inside a form XObject and the desired Resources are in the
% XObject dict and not in the Page dict. So we are going to
% the parent object to find resources instead of only going to
% the page dict when a font does not specify its required
% resources.
/Resources 1 index /Resources knownoget {
oforce
} {
LocalResources
} ifelse def
/FontBBox 1 index /FontBBox get cvx def
/FontMatrix 1 index /FontMatrix oget def
/CharProcs 1 index /CharProcs oget def
1 index /Widths knownoget {
/Widths exch def
/FirstChar 1 index /FirstChar oget def
/LastChar 1 index /LastChar oget def
} if
/FontName 1 index /Name .knownget not {
PDFfile fileposition 16 10 string cvrs cvn
} if def
/Encoding .notdefEncoding 2 index getencoding def
% We have to define BuildChar rather than BuildGlyph:
% there is no PDF equivalent of glyphshow, and we need
% the character code to access the Widths.
/BuildChar {
% Stack: font charcode
1 index begin 3 dict begin
/Font 3 -1 roll def /CharCode 1 index def
% Make unknown characters map to /.notdef
Encoding exch get dup CharProcs exch known
{ CharProcs exch oget }
{ pop CharProcs /.notdef oget }
ifelse
PDFfile fileposition exch
false resolvestream
% Stack: filepos stream
% Don't let setgcolor set the color inside the BuildGlyph
% procedure, because this causes an /undefined error.
q null /FillColor gput null /StrokeColor gput
Font /Resources get exch pdfopdict .pdfruncontext
Q
PDFfile exch setfileposition
end end
} bdef
dup currentdict Encoding .processToUnicode
FontName currentdict end definefont exch pop
} bdef
/.adjustcharwidth { % <wx> <wy> .adjustcharwidth <wx'> <wy'>
/Widths where {
begin
CharCode FirstChar ge CharCode LastChar le and {
exch pop Widths CharCode FirstChar sub get exch
} if end
} if
} bdef
% ---------------- TrueType fonts ---------------- %
/TTfonts mark
/Arial /Helvetica
/Arial,Italic /Helvetica-Oblique
/Arial,Bold /Helvetica-Bold
/Arial,BoldItalic /Helvetica-BoldOblique
/CourierNew /Courier
/CourierNew,Bold /Courier-Bold
/TimesNewRoman /Times-Roman
/TimesNewRoman,Italic /Times-Italic
/TimesNewRoman,Bold /Times-Bold
/TimesNewRoman,BoldItalic /Times-BoldItalic
.dicttomark readonly def
/buildTrueType { % <TrueType-font-resource> buildTrueType <font>
dup /BaseFont oget
/Repaired true store % flag that we had warnings
TTFWarnList 1 index true put % Add fontname to the list
dup TTfonts exch .knownget {
QUIET not {
(Substituting font ) print dup =only
( for ) print 1 index =only (.) = flush
} if
exch 3 1 roll pdffindfont
true .copyfontdict
2 copy exch /FontName exch put
definefont
} {
pdffindfont
} ifelse
} bdef
% Read an embedded TrueType font.
/readtruetype { % <font-resource> <stream-dict> readtruetype <font>
% This is much simpler than readtype1, because we don't
% have to deal with the tripartite .PFB format.
1 index exch
PDFfile fileposition 3 1 roll
true resolvestream readfontfilter
% Stack: filepos fontres stream
1 index /Subtype get /CIDFontType2 eq {
.loadttcidfont
% Stack: filepos fontres cidfont
} {
% filepos fontres stream
1 index /FontDescriptor oget % filepos fontres stream fd
/Flags get 4 and 0 ne % filepos fontres stream is_symbolic
dup {
2 index null exch getencoding % filepos fontres stream is_symbolic Encoding
dup 4 index exch % filepos fontres stream is_symbolic Encoding fontres Encoding
/prebuilt_encoding exch put % filepos fontres stream is_symbolic Encoding
} {
null
} ifelse
.loadpdfttfont
} ifelse
exch pop
PDFfile 3 -1 roll setfileposition
% Ignore both the Encoding and the Widths.
exch pop
} bdef
% ---------------- Type 0 fonts ---------------- %
% Predefine the known CMaps, but only create them on demand.
/knownCMaps mark
/Identity-H { /Identity-H 0 makeIdentityCMap }
/Identity-V { /Identity-V 1 makeIdentityCMap }
.dicttomark def
/makeIdentityCMap { % <cmapname> <wmode> .makeIdentityCMap -
.currentglobal true .setglobal 3 1 roll
/CIDInit /ProcSet findresource begin
12 dict begin
begincmap
/WMode exch def
/CMapName exch def
/CIDSystemInfo 3 dict dup begin
/Registry (Adobe) def
/Ordering (Identity) def
/Supplement 0 def
end def
%/CMapName (see above)
/CMapVersion 1 def
/CMapType 1 def
%WMode (see above)
% The PDF documentation says that these CMaps map CIDs
% "1 to 65,536". This is a misprint for 0 to 65,535.
1 begincodespacerange
% <0001> <00ff> <0100> <ffff>
<0000> <ffff>
endcodespacerange
1 begincidrange
% <0001> <00ff> 1 <0100> <ffff> 256
<0000> <ffff> 0
endcidrange
endcmap
CMapName currentdict /CMap defineresource
knownCMaps CMapName 2 index put
end % CMap
end % CIDInit ProcSet
exch .setglobal
} bdef
/buildType0 { % <Type0-font-resource> buildType0 <font>
dup /BaseFont get % FontName
1 index /Encoding oget
dup type /nametype eq {
dup /CMap resourcestatus {
pop pop /CMap findresource
} {
knownCMaps 1 index .knownget
{ exch pop exec } { /undefined signalerror } ifelse
} ifelse
} {
PDFfile fileposition exch
dup /CMapName get exch true resolvestream cvx exec
/CMap findresource
exch PDFfile exch setfileposition
} ifelse % CMap
[
3 index /DescendantFonts oget { exec resourcefont } forall
] % subfonts
composefont % composefont must insert FontInfo dictionary - see gs_cmap.ps .
% Stack: fontres font
2 copy null .processToUnicode
1 index /FontMatrix knownoget {
dup aload pop true {0 0 1 0 0 1} {3 -1 roll eq and} forall {
1 index exch makefont exch /FontName get exch definefont
} {
pop
} ifelse
} if exch pop
} bdef
% ---------------- CIDFontType0/2 fonts ---------------- %
% Insert metrics into a CIDFont, by saving the PDF W, W2, DW, and DW2
% arrays and using a (currently very inefficient) CDevProc.
% For detail, refer "PDF Reference" 2nd ed., p314 "5.6.3 CIDFonts".
% It notes default DW is 0, but Acrobat Reader uses 1000 as default.
% If DW is 0, currentpoint does not move by default in rendering text
% horizontally, the result is unreadable. You can check it by Acrobat.
/.pdfDefaultDW 1000 def
/.pdfDefaultDW2 [ 880 -1000 ] def
/addCIDmetrics { % <CIDFont-resource> <CIDFont> addCIDmetrics <fontdict>
dup length 5 add dict .copydict
dup /FID undef
dup /UniqueID undef
dup /XUID undef
% Insert the widths into the font.
% Stack: pdfresource newfont
1 index /DW .knownget {
1 index /DW 3 -1 roll put
} {
dup /DW .pdfDefaultDW put
} ifelse
1 index /W .knownget {
dup 2 index /W 3 -1 roll put
.pdfMakeInternalW 1 index /.internalW 3 -1 roll put
} if
1 index /DW2 .knownget {
1 index /DW2 3 -1 roll put
} {
dup /DW2 .pdfDefaultDW2 put
} ifelse
1 index /W2 .knownget {
dup 2 index /W2 3 -1 roll put
.pdfMakeInternalW2 1 index /.internalW2 3 -1 roll put
} if
dup /CDevProc 1 index /CIDWProc load /exec load 3 packedarray cvx put
exch pop
} bdef
/.pdfMakeInternalMTXArray { % <mtx_array> <item_size> .pdfConvertInternalW <mtx_array'>
% convert /W or /W2 to internal expression
%
% mtx_array: original /W or /W2 array
% item_size: number of metrics values per CID
%
% for detail of the metrics list format in PDF,
% refer PDF Ref. p.317 "Glyph Metrics in CIDFonts".
%
% format of single entry in internal expression
%
% [
% [cid_begin cid_end]
% value_is_varied (bool)
% [ [values for cid_begin...]
% [values for cid_begin + 1]
% ... ]
% ]
%
7 dict
begin
/itemSize exch def
/M exch def % original /W or /W2
/Msize M length def
/Mi { M i get } def % W[i]
/Mi1 { M i 1 add get } def % W[i + 1]
/putMTXEntry <<
/arraytype {
[
[Mi Mi Mi1 length itemSize idiv add 1 sub]
true
[
0 itemSize Mi1 length 1 sub {
[ exch 1 1 index itemSize add 1 sub { Mi1 exch get } for ]
} for
]
]
/i i 2 add def
}
/integertype {
[
[Mi Mi1]
false
[[ i 2 add 1 i 1 add itemSize add { M exch get } for ]]
]
/i i 3 add def
}
>> def
/i 0 def
[ { putMTXEntry Mi1 type get exec i Msize ge { exit } if } loop ]
end
} def
/.pdfMakeInternalW { dup length 0 gt { 1 .pdfMakeInternalMTXArray } if } def
/.pdfMakeInternalW2 { dup length 0 gt { 3 .pdfMakeInternalMTXArray } if } def
/.pdfGetMTXByCID { % <internalMTXArray> <cid>
% .pdfGetMTXByCID
% { <MTXEntry> true | false }
% get values for given CID from internal format of /W or /W2
exch
{
{
dup 0 get {} forall % Stack: <cid> <entry> <cid_0> <cid_1>
3 index lt { pop pop false exit } if
2 index exch sub dup 0 lt { pop pop false exit } if
1 index 1 get not { pop 0 } if
exch 2 get exch get true exit
} loop
{ exit } if
} forall
dup type /arraytype eq { exch pop true } { pop false } ifelse
} def
% Apply the [D]W[2] metrics to a character before displaying.
/CIDWProc { % <w0x> <w0y> <llx> <lly> <urx> <ury>
% <w1x> <w1y> <vx> <vy> <cid> <font> CIDWproc
% <w0x'> ... <vy'>
begin % push <font> to currentdict
% <w1x> <w1y> <vx> <vy> won't be used and replaced, discard now
5 1 roll pop pop pop pop
{
currentdict /DW .knownget not { % no DW
.pdfDefaultDW exit % replace <w0x> by defaultDW
} if
currentdict /.internalW .knownget not { % no W
exit % use already-stacked DW
} if
dup length 0 eq { % W is null array
pop % discard unusable W
exit % use already-stacked DW
} if
% W is finite array, try to get W_cid
2 index .pdfGetMTXByCID { % got W, discard DW
exch pop {} forall
exit
} if
exit
} loop
FontType 11 eq {
1000 div % <w0x'> (normalized W)
} if
0 % <w0y'>
% Stack: <w0x> <w0y> <llx> <lly> <urx> <ury> <cid> <w0x'> <w0y'>
9 -2 roll pop pop % discard <w0x> <w0y>
7 2 roll % put <w0x'> <w0y'>
% Stack: <w0x'> <w0y'> <llx> <lly> <urx> <ury> <cid>
0 % <w1x'>
exch % put <w1x'>
% Stack: <w0x'> <w0y'> <llx> <lly> <urx> <ury> <w1x'> <cid>
{
currentdict /DW2 .knownget not { % no DW2, use defaultDW2
.pdfDefaultDW2 exit
} if
currentdict /.internalW2 .knownget not { % has DW2, no W2
exit % use already-stacked DW2
} if
dup length 0 eq { % W2 is null array
pop % discard unusable W2
exit % use already-stacked DW2
} if
2 index .pdfGetMTXByCID { % got W2_cid, discard DW2
exch pop
exit
} if
% could not get W2_cid
exit
} loop
exch pop % discard <cid>
% Stack: <w0x'> <w0y'> <llx> <lly> <urx> <ury> <w1x'> { [<vy'> <w1y'>] | [<w1y'> <vx'> <vy'>] }
dup length 2 eq { % this is DW2
FontType 11 eq {{1000 div}} {{}} ifelse forall exch
8 index 2 div % <vx'> = <w0x'> / 2
exch
}{ % assume W2
FontType 11 eq {{1000 div}} {{}} ifelse forall
} ifelse
end % recover currentdict
} def
% <string> <match> tailmatch ==> <pre> true
% ==> <string> false
/tailmatch {
2 copy length 1 index length .min
dup 2 index length exch sub exch getinterval
1 index eq {
length 1 index length exch sub
0 exch getinterval true
} {
pop false
} ifelse
} bind def
/makeboldfont {
16 dict begin
/strokewidth exch def
/basecidfont exch def
/FontMatrix [ 1 0 0 1 0 0 ] def
/CIDFontName /.boldfont def
/CIDFontType 1 def
/basefont-H /.basefont-H /Identity-H [ basecidfont ] composefont def
/basefont-V /.basefont-V /Identity-V [ basecidfont ] composefont def
/CIDSystemInfo dup basecidfont exch get def
/FontBBox [ basecidfont /FontBBox get cvx exec
4 2 roll basecidfont /FontMatrix get transform
4 2 roll basecidfont /FontMatrix get transform
] def
/tmpstr 2 string def
/BuildGlyph {
gsave
exch begin
dup 256 idiv tmpstr exch 0 exch put
256 mod tmpstr exch 1 exch put
rootfont /WMode known { rootfont /WMode get 1 eq } { false } ifelse
{ basefont-V } { basefont-H } ifelse setfont
strokewidth setlinewidth
1 setlinejoin
newpath
0 0 moveto tmpstr false charpath stroke
0 0 moveto tmpstr show
currentpoint setcharwidth
end
grestore
} bind def
currentdict
end
dup /CIDFontName get exch /CIDFont defineresource
} bind def
% <CIDFont-resource> <CIDFontName> findCIDFont <CIDFont-resource> <font>
% CIDFont-resource is not modified.
/findCIDFont {
{
dup /CIDFont resourcestatus {
pop pop /CIDFont findresource
exit
} if
.remove_font_name_prefix
dup dup length string cvs
(,Bold) tailmatch {
exch pop
cvn findCIDFont 0.03 makeboldfont
exit
} if
(,Italic) tailmatch {
exch pop
cvn findCIDFont
[ 1 0 0.3 1 0 0 ] makefont
exit
} if
(,BoldItalic) tailmatch {
exch pop
cvn findCIDFont 0.03 makeboldfont
[ 1 0 0.3 1 0 0 ] makefont
exit
} if
pop
1 index /CIDSystemInfo get begin Registry (-) Ordering end
concatstrings concatstrings
cvn
QUIET not {
(Substituting CID font resource) print dup ==only
( for ) print 1 index ==only (.\n) print
} if
exch pop
/CIDFont findresource
exit
} loop
} bdef
/buildCIDType0 { % <CIDFontType0-font-resource> buildCIDType0 <font>
dup /BaseFont get findCIDFont exch pop
} bdef
/buildCIDType2 { % <CIDFontType2-font-resource> buildCIDType2 <font>
dup /BaseFont get findCIDFont exch pop
} bdef
/processCIDToGIDMap { % <fontres> <cidfont> processCIDToGIDMap <fontres> <cidfont>
1 index /CIDToGIDMap knownoget {
PDFfile fileposition 4 1 roll
dup /Identity eq {
pop
} {
true resolvestream
% Stack: filepos fontres font mapstream
% Can't know the length of the decompressed stream, so allocate a big buffer...
dup 65534 string readstring {
% Length exceeded max string size, use an array of two strings
1 index 65534 string readstring pop % maybe a null string - not important.
2 array astore
% Stack: filepos fontres font mapstream array
dup 1 get length 65534 add
} {
dup length
} ifelse
2 idiv
% Stack: filepos fontres font mapstream array/string CIDCount
3 index exch /CIDCount exch put
exch closefile exch
dup /CIDMap 4 -1 roll put
} ifelse
3 2 roll PDFfile exch setfileposition
} if
} bdef
% Adjust a CIDFontType0 DW[2] in the font resource.
/adjustCIDType0 { % <font-resource> <font> adjustfont <font'>
addCIDmetrics
dup /CIDFontName get exch /CIDFont defineresource
} bind def
% Adjust a CIDFontType2 DW[2] and CIDToGIDMap in the font resource.
/adjustCIDType2 { % <font-resource> <font> adjustfont <font'>
addCIDmetrics
processCIDToGIDMap
dup /CIDFontName get exch /CIDFont defineresource
} bind def
% ---------------- Other embedded fonts ---------------- %
/fontloadprocs mark
/Type1C /readType1C cvx
/CIDFontType0C /readCIDFontType0C cvx
.dicttomark readonly def
% Read an embedded compressed font.
/readType1C { % <font-resource> <stream-dict> readType1C <font>
1 index exch
PDFfile fileposition 3 1 roll
dup true resolvestream dup readfontfilter
% Stack: pos resource streamdict stream filter
3 index /FontDescriptor oget /FontName oget
1 index FRD
closefile closefile pop
PDFfile 3 -1 roll setfileposition
/FontDescriptor oget /FontName oget pdfaddcachedfont
exch pop
} bdef
% Read an embedded CFF CIDFont.
/readCIDFontType0C { % <font-resource> <stream-dict> readCIDFontType0C <font>
PDFfile fileposition 3 1 roll
dup true resolvestream dup readfontfilter
% Stack: pos resource streamdict stream filter
3 index /FontDescriptor oget /FontName oget
1 index FRD
closefile closefile pop
PDFfile 3 -1 roll setfileposition
% Some broken Adobe software produces PDF files in which
% the FontName of the CFF font and the FontName in the
% FontDescriptor don't match the BaseFont in the font.
% Use the FontName, rather than the BaseFont, here.
dup /FontDescriptor oget /FontName oget /CIDFont findresource
addCIDmetrics dup /CIDFontName get exch /CIDFont defineresource
} bdef
% ---------------- Font lookup ---------------- %
/fonttypeprocs mark % <font-resource> -proc- <font>
/Type0 //buildType0
/Type1 //buildType1
/MMType1 //buildType1
/Type3 //buildType3
/TrueType //buildTrueType
/CIDFontType0 //buildCIDType0
/CIDFontType2 //buildCIDType2
.dicttomark readonly def
/adjustfonttypes mark
/Type1 //adjustfont
/MMType1 //adjustfont
/TrueType //adjustfont
/CIDFontType0 //adjustCIDType0
/CIDFontType2 //adjustCIDType2
.dicttomark readonly def
/resourcefont % <font-resource> resourcefont <font>
{ dup /PSFont .knownget
{ /FID knownoget { type /fonttype eq } { //false } ifelse }
{ //false }
ifelse
{ /PSFont get }
{ dup dup /FontDescriptor knownoget { % Stack: font-res font-res font-desc
dup /FontObject .knownget {
3 1 roll pop pop
} {
dup /FontFile knownoget
{ dup /Length oget 0 eq
{ pop pop dup /Subtype get fonttypeprocs exch get exec }
{ exch pop readtype1 }
ifelse
}
{
dup /FontFile2 knownoget
{ exch pop readtruetype }
{ /FontFile3 knownoget
{ dup /Subtype get fontloadprocs exch get exec }
{ dup /Subtype get fonttypeprocs exch get exec }
ifelse
}
ifelse
}
ifelse
1 index /FontDescriptor oget
1 index /FontObject exch put % Save pointer to the font
}
ifelse
}
{ dup /Subtype get fonttypeprocs exch dup () cvn eq {
( **** Warning: Font missing required Subtype, /Type1 assumed.\n)
pdfformaterror
pop /Type1
} if get exec
}
ifelse
% Stack: font-res font
1 index 3 1 roll
1 index /Subtype get
//adjustfonttypes exch .knownget { exec } { exch pop } ifelse
dup 3 1 roll /PSFont exch put
}
ifelse
dup checkGlyphNames2Unicode
} bdef
drawopdict begin
/d0 {
.adjustcharwidth setcharwidth
} bdef
/d1 {
4 index 0 ne {
% invalid wy parameter for d1 in Type3 font (must be 0)
% Even though the PDF 1.4 specification states that this must be 0,
% Distiller sometimes creates Type3 fonts with non-zero wy. We set
% it to 0 since this is apparently what Acrobat Reader 4 and 5 do,
% but if the specification is ever changed to allow non-zero wy, this
% will not work.
5 -1 roll pop 0 5 1 roll % set wy to 0
} if
2 copy % ... llx lly urx ury | urx ury
0 ne exch 0 ne % ... llx lly urx ury | ury!=0 urx!=0
3 index 6 index eq and % ... llx lly urx ury | ury!=0 (urx!=0 && llx==urx)
exch 2 index 5 index eq and or { % ... llx lly urx ury | (urx!=0 && llx==urx) || (ury!=0 && lly==ury)
% The bounding box is empty and likely incorrect. Don't cache.
pop pop pop pop .adjustcharwidth setcharwidth
} {
6 -2 roll .adjustcharwidth 6 2 roll setcachedevice
} ifelse
} bdef
/Tf {
1 index Page /Font rget not { 1 index /invalidfont signalerror } if
resourcefont exch Tf pop
} bdef
end
end % pdfdict
end % GS_PDF_ProcSet
.setglobal