shithub: riscv

ref: 38ea1ac105f4484f02bba3bfbc790ebe4f18f016
dir: /sys/src/cmd/audio/mp3enc/lame.c/

View raw version
/* -*- mode: C; mode: fold -*- */
/*
 *	LAME MP3 encoding engine
 *
 *	Copyright (c) 1999 Mark Taylor
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Library General Public
 * License as published by the Free Software Foundation; either
 * version 2 of the License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU
 * Library General Public License for more details.
 *
 * You should have received a copy of the GNU Library General Public
 * License along with this library; if not, write to the
 * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
 * Boston, MA 02111-1307, USA.
 */

/* $Id: lame.c,v 1.100 2001/03/25 23:14:45 markt Exp $ */

#ifdef HAVE_CONFIG_H
# include <config.h>
#endif


#include <assert.h>
#include "lame-analysis.h"
#include "lame.h"
#include "util.h"
#include "bitstream.h"
#include "version.h"
#include "tables.h"
#include "quantize_pvt.h"
#include "VbrTag.h"

#if defined(__FreeBSD__) && !defined(__alpha__)
#include <floatingpoint.h>
#endif
#ifdef __riscos__
#include "asmstuff.h"
#endif

#ifdef WITH_DMALLOC
#include <dmalloc.h>
#endif


static void
lame_init_params_ppflt_lowpass(FLOAT8 amp_lowpass[32], FLOAT lowpass1,
                               FLOAT lowpass2, int *lowpass_band,
                               int *minband, int *maxband)
{
    int     band;
    FLOAT8  freq;

    for (band = 0; band <= 31; band++) {
        freq = band / 31.0;
        amp_lowpass[band] = 1;
        /* this band and above will be zeroed: */
        if (freq >= lowpass2) {
            *lowpass_band = Min(*lowpass_band, band);
            amp_lowpass[band] = 0;
        }
        if (lowpass1 < freq && freq < lowpass2) {
            *minband = Min(*minband, band);
            *maxband = Max(*maxband, band);
            amp_lowpass[band] = cos((PI / 2) *
                                    (lowpass1 - freq) / (lowpass2 - lowpass1));
        }
        /*
         * DEBUGF("lowpass band=%i  amp=%f \n",
         *      band, gfc->amp_lowpass[band]);
         */
    }
}

/* lame_init_params_ppflt */

/*}}}*/
/* static void   lame_init_params_ppflt         (lame_internal_flags *gfc)                                                                                        *//*{{{ */

static void
lame_init_params_ppflt(lame_global_flags * gfp)
{
    lame_internal_flags *gfc = gfp->internal_flags;
  /**/
    /* compute info needed for polyphase filter (filter type==0, default) */
  /**/

    int     band, maxband, minband;
    FLOAT8  freq;

    if (gfc->lowpass1 > 0) {
        minband = 999;
        maxband = -1;
        lame_init_params_ppflt_lowpass(gfc->amp_lowpass,
                                       gfc->lowpass1, gfc->lowpass2,
                                       &gfc->lowpass_band, &minband, &maxband);
        /* compute the *actual* transition band implemented by
         * the polyphase filter */
        if (minband == 999) {
            gfc->lowpass1 = (gfc->lowpass_band - .75) / 31.0;
        }
        else {
            gfc->lowpass1 = (minband - .75) / 31.0;
        }
        gfc->lowpass2 = gfc->lowpass_band / 31.0;

        gfc->lowpass_start_band = minband;
        gfc->lowpass_end_band = maxband;

        /* as the lowpass may have changed above
         * calculate the amplification here again
         */
        for (band = minband; band <= maxband; band++) {
            freq = band / 31.0;
            gfc->amp_lowpass[band] =
                cos((PI / 2) * (gfc->lowpass1 - freq) /
                    (gfc->lowpass2 - gfc->lowpass1));
        }
    }
    else {
        gfc->lowpass_start_band = 0;
        gfc->lowpass_end_band = -1; /* do not to run into for-loops */
    }

    /* make sure highpass filter is within 90% of what the effective
     * highpass frequency will be */
    if (gfc->highpass2 > 0) {
        if (gfc->highpass2 < .9 * (.75 / 31.0)) {
            gfc->highpass1 = 0;
            gfc->highpass2 = 0;
            MSGF(gfc, "Warning: highpass filter disabled.  "
                 "highpass frequency too small\n");
        }
    }

    if (gfc->highpass2 > 0) {
        minband = 999;
        maxband = -1;
        for (band = 0; band <= 31; band++) {
            freq = band / 31.0;
            gfc->amp_highpass[band] = 1;
            /* this band and below will be zereod */
            if (freq <= gfc->highpass1) {
                gfc->highpass_band = Max(gfc->highpass_band, band);
                gfc->amp_highpass[band] = 0;
            }
            if (gfc->highpass1 < freq && freq < gfc->highpass2) {
                minband = Min(minband, band);
                maxband = Max(maxband, band);
                gfc->amp_highpass[band] =
                    cos((PI / 2) *
                        (gfc->highpass2 - freq) /
                        (gfc->highpass2 - gfc->highpass1));
            }
            /*
               DEBUGF("highpass band=%i  amp=%f \n",
               band, gfc->amp_highpass[band]);
             */
        }
        /* compute the *actual* transition band implemented by
         * the polyphase filter */
        gfc->highpass1 = gfc->highpass_band / 31.0;
        if (maxband == -1) {
            gfc->highpass2 = (gfc->highpass_band + .75) / 31.0;
        }
        else {
            gfc->highpass2 = (maxband + .75) / 31.0;
        }

        gfc->highpass_start_band = minband;
        gfc->highpass_end_band = maxband;

        /* as the highpass may have changed above
         * calculate the amplification here again
         */
        for (band = minband; band <= maxband; band++) {
            freq = band / 31.0;
            gfc->amp_highpass[band] =
                cos((PI / 2) * (gfc->highpass2 - freq) /
                    (gfc->highpass2 - gfc->highpass1));
        }
    }
    else {
        gfc->highpass_start_band = 0;
        gfc->highpass_end_band = -1; /* do not to run into for-loops */
    }
    /*
       DEBUGF("lowpass band with amp=0:  %i \n",gfc->lowpass_band);
       DEBUGF("highpass band with amp=0:  %i \n",gfc->highpass_band);
       DEBUGF("lowpass band start:  %i \n",gfc->lowpass_start_band);
       DEBUGF("lowpass band end:    %i \n",gfc->lowpass_end_band);
       DEBUGF("highpass band start:  %i \n",gfc->highpass_start_band);
       DEBUGF("highpass band end:    %i \n",gfc->highpass_end_band);
     */
}

/*}}}*/


static void
optimum_bandwidth(double *const lowerlimit,
                  double *const upperlimit,
                  const unsigned bitrate,
                  const int samplefreq,
                  const double channels, lame_global_flags * gfp)
{
/*
 *  Input:
 *      bitrate     total bitrate in bps
 *      samplefreq  output sampling frequency in Hz
 *      channels    1 for mono, 2+epsilon for MS stereo, 3 for LR stereo
 *                  epsilon is the percentage of LR frames for typical audio
 *                  (I use 'Fade to Gray' by Metallica)
 *
 *   Output:
 *      lowerlimit: best lowpass frequency limit for input filter in Hz
 *      upperlimit: best highpass frequency limit for input filter in Hz
 */
    double  f_low;
    double  f_high;
    double  br;

    assert(bitrate >= 8000 && bitrate <= 320000);
    assert(samplefreq >= 8000 && samplefreq <= 48000);
    assert(channels == 1 || (channels >= 2 && channels <= 3));

    if (samplefreq >= 32000)
        br =
            bitrate - (channels ==
                       1 ? (17 + 4) * 8 : (32 + 4) * 8) * samplefreq / 1152;
    else
        br =
            bitrate - (channels ==
                       1 ? (9 + 4) * 8 : (17 + 4) * 8) * samplefreq / 576;

    if (channels >= 2.)
        br /= 1.75 + 0.25 * (channels - 2.); // MS needs 1.75x mono, LR needs 2.00x mono (experimental data of a lot of albums)

    br *= 0.5;          // the sine and cosine term must share the bitrate

/*
 *  So, now we have the bitrate for every spectral line.
 *  Let's look at the current settings:
 *
 *    Bitrate   limit    bits/line
 *     8 kbps   0.34 kHz  4.76
 *    16 kbps   1.9 kHz   2.06
 *    24 kbps   2.8 kHz   2.21
 *    32 kbps   3.85 kHz  2.14
 *    40 kbps   5.1 kHz   2.06
 *    48 kbps   5.6 kHz   2.21
 *    56 kbps   7.0 kHz   2.10
 *    64 kbps   7.7 kHz   2.14
 *    80 kbps  10.1 kHz   2.08
 *    96 kbps  11.2 kHz   2.24
 *   112 kbps  14.0 kHz   2.12
 *   128 kbps  15.4 kHz   2.17
 *   160 kbps  18.2 kHz   2.05
 *   192 kbps  21.1 kHz   2.14
 *   224 kbps  22.0 kHz   2.41
 *   256 kbps  22.0 kHz   2.78
 *
 *   What can we see?
 *       Value for 8 kbps is nonsense (although 8 kbps and stereo is nonsense)
 *       Values are between 2.05 and 2.24 for 16...192 kbps
 *       Some bitrate lack the following bitrates have: 16, 40, 80, 160 kbps
 *       A lot of bits per spectral line have: 24, 48, 96 kbps
 *
 *   What I propose?
 *       A slightly with the bitrate increasing bits/line function. It is
 *       better to decrease NMR for low bitrates to get a little bit more
 *       bandwidth. So we have a better trade off between twickling and
 *       muffled sound.
 */

    f_low = br / log10(br * 4.425e-3); // Tests with 8, 16, 32, 64, 112 and 160 kbps

/*
 *  What we get now?
 *
 *    Bitrate       limit  bits/line	difference
 *     8 kbps (8)  1.89 kHz  0.86          +1.6 kHz
 *    16 kbps (8)  3.16 kHz  1.24          +1.2 kHz
 *    32 kbps(16)  5.08 kHz  1.54          +1.2 kHz
 *    56 kbps(22)  7.88 kHz  1.80          +0.9 kHz
 *    64 kbps(22)  8.83 kHz  1.86          +1.1 kHz
 *   112 kbps(32) 14.02 kHz  2.12           0.0 kHz
 *   112 kbps(44) 13.70 kHz  2.11          -0.3 kHz
 *   128 kbps     15.40 kHz  2.17           0.0 kHz
 *   160 kbps     16.80 kHz  2.22          -1.4 kHz
 *   192 kbps     19.66 kHz  2.30          -1.4 kHz
 *   256 kbps     22.05 kHz  2.78           0.0 kHz
 */

#if 0
/*
 *  Beginning at 128 kbps/jstereo, we can use the following additional
 *  strategy:
 *
 *      For every increase of f_low in a way that the ATH(f_low)
 *      increases by 4 dB we force an additional NMR of 1.25 dB.
 *      These are the setting of the VBR quality selecting scheme
 *      for V <= 4.
 */
    {
        double  br_sw = (128000 - (32 + 4) * 8 * 44100 / 1152) / 1.75 * 0.5;
        double  f_low_sw = br_sw / log10(br_sw * 4.425e-3);

        // printf ("br_sw=%f  f_low_sw=%f\n", br_sw, f_low_sw );
        // printf ("br   =%f  f_low   =%f\n", br   , f_low    );
        // fflush (stdout);

        while (f_low > f_low_sw) {
            double  dATH = ATHformula(f_low, gfp) - ATHformula(f_low_sw, gfp); // [dB]
            double  dNMR = br / f_low - br_sw / f_low_sw; // bit

            // printf ("br   =%f  f_low   =%f\n", br   , f_low    );
            // printf ("dATH =%f  dNMR    =%f\n", dATH , dNMR     );
            // fflush (stdout);


            if (dATH / 4.0 < dNMR * 6.0206 / 1.25) // 1 bit = 6.0206... dB
                break;
            f_low -= 25.;
        }
    }
#endif

/*
 *  Now we try to choose a good high pass filtering frequency.
 *  This value is currently not used.
 *    For fu < 16 kHz:  sqrt(fu*fl) = 560 Hz
 *    For fu = 18 kHz:  no high pass filtering
 *  This gives:
 *
 *   2 kHz => 160 Hz
 *   3 kHz => 107 Hz
 *   4 kHz =>  80 Hz
 *   8 kHz =>  40 Hz
 *  16 kHz =>  20 Hz
 *  17 kHz =>  10 Hz
 *  18 kHz =>   0 Hz
 *
 *  These are ad hoc values and these can be optimized if a high pass is available.
 */
    if (f_low <= 16000)
        f_high = 16000. * 20. / f_low;
    else if (f_low <= 18000)
        f_high = 180. - 0.01 * f_low;
    else
        f_high = 0.;

    /*
     *  When we sometimes have a good highpass filter, we can add the highpass
     *  frequency to the lowpass frequency
     */

    if (lowerlimit != NULL)
        *lowerlimit = f_low /* + f_high */ ;
    if (upperlimit != NULL)
        *upperlimit = f_high;
/*
 * Now the weak points:
 *
 *   - the formula f_low=br/log10(br*4.425e-3) is an ad hoc formula
 *     (but has a physical background and is easy to tune)
 *   - the switch to the ATH based bandwidth selecting is the ad hoc
 *     value of 128 kbps
 */
}

static int
optimum_samplefreq(int lowpassfreq, int input_samplefreq)
{
/*
 * Rules:
 *
 *  - output sample frequency should NOT be decreased by more than 3% if lowpass allows this
 *  - if possible, sfb21 should NOT be used
 *
 *  Problem: Switches to 32 kHz at 112 kbps
 */
    if (input_samplefreq <= 8000 * 1.03 || lowpassfreq <= 3622)
        return 8000;
    if (input_samplefreq <= 11025 * 1.03 || lowpassfreq <= 4991)
        return 11025;
    if (input_samplefreq <= 12000 * 1.03 || lowpassfreq <= 5620)
        return 12000;
    if (input_samplefreq <= 16000 * 1.03 || lowpassfreq <= 7244)
        return 16000;
    if (input_samplefreq <= 22050 * 1.03 || lowpassfreq <= 9982)
        return 22050;
    if (input_samplefreq <= 24000 * 1.03 || lowpassfreq <= 11240)
        return 24000;
    if (input_samplefreq <= 32000 * 1.03 || lowpassfreq <= 15264)
        return 32000;
    if (input_samplefreq <= 44100 * 1.03)
        return 44100;
    return 48000;
}


/* set internal feature flags.  USER should not access these since
 * some combinations will produce strange results */
void
lame_init_qval(lame_global_flags * gfp)
{
    lame_internal_flags *gfc = gfp->internal_flags;

    switch (gfp->quality) {
    case 9:            /* no psymodel, no noise shaping */
        gfc->filter_type = 0;
        gfc->psymodel = 0;
        gfc->quantization = 0;
        gfc->noise_shaping = 0;
        gfc->noise_shaping_amp = 0;
        gfc->noise_shaping_stop = 0;
        gfc->use_best_huffman = 0;
        break;

    case 8:
        gfp->quality = 7;
    case 7:            /* use psymodel (for short block and m/s switching), but no noise shapping */
        gfc->filter_type = 0;
        gfc->psymodel = 1;
        gfc->quantization = 0;
        gfc->noise_shaping = 0;
        gfc->noise_shaping_amp = 0;
        gfc->noise_shaping_stop = 0;
        gfc->use_best_huffman = 0;
        break;

    case 6:
        gfp->quality = 5;
    case 5:            /* the default */
        gfc->filter_type = 0;
        gfc->psymodel = 1;
        gfc->quantization = 0;
        gfc->noise_shaping = 1;
         /**/ gfc->noise_shaping_amp = 0;
        gfc->noise_shaping_stop = 0;
        gfc->use_best_huffman = 0;
        break;

    case 4:
        gfp->quality = 3;
    case 3:
        gfc->filter_type = 0;
        gfc->psymodel = 1;
        gfc->quantization = 1;
        gfc->noise_shaping = 1;
        gfc->noise_shaping_amp = 0;
        gfc->noise_shaping_stop = 0;
        gfc->use_best_huffman = 1;
        break;

    case 2:
        gfc->filter_type = 0;
        gfc->psymodel = 1;
        gfc->quantization = 1;
        gfc->noise_shaping = 1;
        gfc->noise_shaping_amp = 1;
        gfc->noise_shaping_stop = 1;
        gfc->use_best_huffman = 1;
        break;

    case 1:
        gfc->filter_type = 0;
        gfc->psymodel = 1;
        gfc->quantization = 1;
        gfc->noise_shaping = 1;
        gfc->noise_shaping_amp = 2;
        gfc->noise_shaping_stop = 1;
        gfc->use_best_huffman = 1;
        break;

    case 0:            /* 0..1 quality */
        gfc->filter_type = 0; /* 1 not yet coded */
        gfc->psymodel = 1;
        gfc->quantization = 1;
        gfc->noise_shaping = 1; /* 2=usually lowers quality */
        gfc->noise_shaping_amp = 2;
        gfc->noise_shaping_stop = 1;
        gfc->use_best_huffman = 1; /* 2 not yet coded */
    }

    /* modifications to the above rules: */

    /* -Z option enables scalefactor_scale: */
    if (gfp->experimentalZ) {
        gfc->noise_shaping = 2;
    }

    if (gfp->exp_nspsytune & 1) {
        if (gfp->quality <= 2)
            gfc->noise_shaping = 2; /* use scalefac_scale */
    }

}







/* int           lame_init_params               (lame_global_flags *gfp)                                                                                          *//*{{{ */

/*
 *   initialize internal params based on data in gf
 *   (globalflags struct filled in by calling program)
 *
 *  OUTLINE:
 *
 * We first have some complex code to determine bitrate,
 * output samplerate and mode.  It is complicated by the fact
 * that we allow the user to set some or all of these parameters,
 * and need to determine best possible values for the rest of them:
 *
 *  1. set some CPU related flags
 *  2. check if we are mono->mono, stereo->mono or stereo->stereo
 *  3.  compute bitrate and output samplerate:
 *          user may have set compression ratio
 *          user may have set a bitrate
 *          user may have set a output samplerate
 *  4. set some options which depend on output samplerate
 *  5. compute the actual compression ratio
 *  6. set mode based on compression ratio
 *
 *  The remaining code is much simpler - it just sets options
 *  based on the mode & compression ratio:
 *
 *   set allow_diff_short based on mode
 *   select lowpass filter based on compression ratio & mode
 *   set the bitrate index, and min/max bitrates for VBR modes
 *   disable VBR tag if it is not appropriate
 *   initialize the bitstream
 *   initialize scalefac_band data
 *   set sideinfo_len (based on channels, CRC, out_samplerate)
 *   write an id3v2 tag into the bitstream
 *   write VBR tag into the bitstream
 *   set mpeg1/2 flag
 *   estimate the number of frames (based on a lot of data)
 *
 *   now we set more flags:
 *   nspsytune:
 *      see code
 *   VBR modes
 *      see code
 *   CBR/ABR
 *      see code
 *
 *  Finally, we set the algorithm flags based on the gfp->quality value
 *  lame_init_qval(gfp);
 *
 */
int
lame_init_params(lame_global_flags * const gfp)
{

    int     i;
    int     j;
    lame_internal_flags *gfc = gfp->internal_flags;

    gfc->gfp = gfp;

    gfc->Class_ID = 0;

    /* report functions */
    gfc->report.msgf   = gfp->report.msgf;
    gfc->report.debugf = gfp->report.debugf;
    gfc->report.errorf = gfp->report.errorf;

    gfc->CPU_features.i387 = has_i387();
    gfc->CPU_features.AMD_3DNow = has_3DNow();
    gfc->CPU_features.MMX = has_MMX();
    gfc->CPU_features.SIMD = has_SIMD();
    gfc->CPU_features.SIMD2 = has_SIMD2();


    if (NULL == gfc->ATH)
        gfc->ATH = calloc(1, sizeof(ATH_t));

    if (NULL == gfc->ATH)
        return -2;  // maybe error codes should be enumerated in lame.h ??

#ifdef KLEMM_44
    /* Select the fastest functions for this CPU */
    init_scalar_functions(gfc);
#endif

    gfc->channels_in = gfp->num_channels;
    if (gfc->channels_in == 1)
        gfp->mode = MONO;
    gfc->channels_out = (gfp->mode == MONO) ? 1 : 2;
    gfc->mode_ext = MPG_MD_LR_LR;
    if (gfp->mode == MONO)
        gfp->force_ms = 0; // don't allow forced mid/side stereo for mono output


    if (gfp->VBR != vbr_off) {
        gfp->free_format = 0; /* VBR can't be mixed with free format */
    }

    if (gfp->VBR == vbr_off && gfp->brate == 0) {
        /* no bitrate or compression ratio specified, use a compression ratio of 11.025 */
        if (gfp->compression_ratio == 0)
            gfp->compression_ratio = 11.025;
		/* rate to compress a CD down to exactly 128000 bps */
    }


    if (gfp->VBR == vbr_off && gfp->brate == 0) {
        /* no bitrate or compression ratio specified, use 11.025 */
        if (gfp->compression_ratio == 0)
            gfp->compression_ratio = 11.025;
		/* rate to compress a CD down to exactly 128000 bps */
    }

    /* find bitrate if user specify a compression ratio */
    if (gfp->VBR == vbr_off && gfp->compression_ratio > 0) {

        if (gfp->out_samplerate == 0)
            gfp->out_samplerate = map2MP3Frequency(0.97 * gfp->in_samplerate);
			/* round up with a margin of 3% */

        /* choose a bitrate for the output samplerate which achieves
         * specified compression ratio
         */
	gfp->brate = gfp->out_samplerate * 16 * gfc->channels_out / (1.e3 *
		gfp->compression_ratio);

        /* we need the version for the bitrate table look up */
        gfc->samplerate_index = SmpFrqIndex(gfp->out_samplerate, &gfp->version);

        if (!gfp->free_format) /* for non Free Format find the nearest allowed bitrate */
            gfp->brate =
                FindNearestBitrate(gfp->brate, gfp->version,
                                   gfp->out_samplerate);
    }

	/*
	 * at 160 kbps (MPEG-2/2.5)/ 320 kbps (MPEG-1), only Free format
	 * or CBR are possible, no VBR
	 */
    if (gfp->VBR != vbr_off && gfp->brate >= 320)
        gfp->VBR = vbr_off;

    if (gfp->out_samplerate == 0) {
	/* if output sample frequency is not given, find a useful value */
        gfp->out_samplerate = map2MP3Frequency(0.97 * gfp->in_samplerate);


        /* check if user specified bitrate requires downsampling, if compression    */
        /* ratio is > 13, choose a new samplerate to get the ratio down to about 10 */

        if (gfp->VBR == vbr_off && gfp->brate > 0) {
            gfp->compression_ratio = gfp->out_samplerate * 16 *
		gfc->channels_out / (1.e3 * gfp->brate);
            if (gfp->compression_ratio > 13.)
                gfp->out_samplerate = map2MP3Frequency((10. * 1.e3 *
			gfp->brate) / (16 * gfc->channels_out));
        }
        if (gfp->VBR == vbr_abr) {
            gfp->compression_ratio = gfp->out_samplerate * 16 *
		gfc->channels_out / (1.e3 * gfp->VBR_mean_bitrate_kbps);
            if (gfp->compression_ratio > 13.)
                gfp->out_samplerate =
                    map2MP3Frequency((10. * 1.e3 * gfp->VBR_mean_bitrate_kbps) /
                                     (16 * gfc->channels_out));
        }
    }

    if (gfp->ogg) {
        gfp->framesize = 1024;
        gfp->encoder_delay = ENCDELAY;
        gfc->coding = coding_Ogg_Vorbis;
    }
    else {
        gfc->mode_gr = gfp->out_samplerate <= 24000 ? 1 : 2; // Number of granules per frame
        gfp->framesize = 576 * gfc->mode_gr;
        gfp->encoder_delay = ENCDELAY;
        gfc->coding = coding_MPEG_Layer_3;
    }

    gfc->frame_size = gfp->framesize;

    gfc->resample_ratio = (double) gfp->in_samplerate / gfp->out_samplerate;

    /*
     *  sample freq       bitrate     compression ratio
     *     [kHz]      [kbps/channel]   for 16 bit input
     *     44.1            56               12.6
     *     44.1            64               11.025
     *     44.1            80                8.82
     *     22.05           24               14.7
     *     22.05           32               11.025
     *     22.05           40                8.82
     *     16              16               16.0
     *     16              24               10.667
     *
     */
    /*
     *  For VBR, take a guess at the compression_ratio.
     *  For example:
     *
     *    VBR_q    compression     like
     *     -        4.4         320 kbps/44 kHz
     *   0...1      5.5         256 kbps/44 kHz
     *     2        7.3         192 kbps/44 kHz
     *     4        8.8         160 kbps/44 kHz
     *     6       11           128 kbps/44 kHz
     *     9       14.7          96 kbps
     *
     *  for lower bitrates, downsample with --resample
     */

    switch (gfp->VBR) {
    case vbr_mt:
    case vbr_rh:
    case vbr_mtrh:
        {
            FLOAT8  cmp[] = { 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 };
            gfp->compression_ratio = cmp[gfp->VBR_q];
        }
        break;
    case vbr_abr:
        gfp->compression_ratio = gfp->out_samplerate * 16 * gfc->channels_out /
		(1.e3 * gfp->VBR_mean_bitrate_kbps);
        break;
    default:
        gfp->compression_ratio =
            gfp->out_samplerate * 16 * gfc->channels_out / (1.e3 * gfp->brate);
        break;
    }


    /* mode = -1 (not set by user) or
     * mode = MONO (because of only 1 input channel).
     * If mode has been set, then select between STEREO or J-STEREO
     * At higher quality (lower compression) use STEREO instead of J-STEREO.
     * (unless the user explicitly specified a mode)
     *
     * The threshold to switch to STEREO is:
     *    48 kHz:   171 kbps (used at 192+)
     *    44.1 kHz: 160 kbps (used at 160+)
     *    32 kHz:   119 kbps (used at 128+)
     *
     *   Note, that for 32 kHz/128 kbps J-STEREO FM recordings sound much
     *   better than STEREO, so I'm not so very happy with that.
     *   fs < 32 kHz I have not tested.
     */
    if (gfp->mode == NOT_SET) {
        if (gfp->compression_ratio < 8)
            gfp->mode = STEREO;
        else
            gfp->mode = JOINT_STEREO;
    }

    /* KLEMM's jstereo with ms threshold adjusted via compression ratio */
    if (gfp->mode_automs) {
        if (gfp->mode != MONO && gfp->compression_ratio < 6.6)
            gfp->mode = STEREO;
    }


    if (gfp->allow_diff_short == -1) {
        if (gfp->mode == STEREO)
            gfp->allow_diff_short = 1;
    }




  /**/
  /* if a filter has not been enabled, see if we should add one: */
  /**/
    if (gfp->lowpassfreq == 0) {
        double  lowpass;
        double  highpass;
        double  channels;

        switch (gfp->mode) {
        case MONO:
            channels = 1.;
            break;
        case JOINT_STEREO:
            channels = 2. + 0.00;
            break;
        case DUAL_CHANNEL:
        case STEREO:
            channels = 3.;
            break;
        default:
            channels = 1.;  // just to make data flow analysis happy :-)
            assert(0);
            break;
        }

        optimum_bandwidth(&lowpass,
                          &highpass,
                          gfp->out_samplerate * 16 * gfc->channels_out /
                          gfp->compression_ratio, gfp->out_samplerate, channels,
                          gfp);

        if (lowpass < 0.5 * gfp->out_samplerate) {
            //MSGF(gfc,"Lowpass @ %7.1f Hz\n", lowpass);
            gfc->lowpass1 = gfc->lowpass2 =
                lowpass / (0.5 * gfp->out_samplerate);
        }
        if (0 && gfp->out_samplerate !=
            optimum_samplefreq(lowpass, gfp->in_samplerate)) {
            MSGF(gfc,
                 "I would suggest to use %u Hz instead of %u Hz sample frequency\n",
                 optimum_samplefreq(lowpass, gfp->in_samplerate),
                 gfp->out_samplerate);
        }
        fflush(stderr);
    }

    /* apply user driven high pass filter */
    if (gfp->highpassfreq > 0) {
        gfc->highpass1 = 2. * gfp->highpassfreq / gfp->out_samplerate;
					/* will always be >=0 */
        if (gfp->highpasswidth >= 0)
            gfc->highpass2 = 2. * (gfp->highpassfreq + gfp->highpasswidth) /
		gfp->out_samplerate;
        else            	/* 0% above on default */
            gfc->highpass2 =
                (1 + 0.00) * 2. * gfp->highpassfreq / gfp->out_samplerate;
    }

    /* apply user driven low pass filter */
    if (gfp->lowpassfreq > 0) {
        gfc->lowpass2 = 2. * gfp->lowpassfreq / gfp->out_samplerate;
			/* will always be >=0 */
        if (gfp->lowpasswidth >= 0) {
            gfc->lowpass1 = 2. * (gfp->lowpassfreq - gfp->lowpasswidth) /
		gfp->out_samplerate;
            if (gfc->lowpass1 < 0) /* has to be >= 0 */
                gfc->lowpass1 = 0;
        }
        else {          /* 0% below on default */
            gfc->lowpass1 =
                (1 - 0.00) * 2. * gfp->lowpassfreq / gfp->out_samplerate;
        }
    }

  /**/
  /* compute info needed for polyphase filter (filter type==0, default) */
  /**/
    lame_init_params_ppflt(gfp);


  /*
   * compute info needed for FIR filter (filter_type==1)
   */
   /* not yet coded */



  /*
   * samplerate and bitrate index
   */
    gfc->samplerate_index = SmpFrqIndex(gfp->out_samplerate, &gfp->version);
    if (gfc->samplerate_index < 0)
        return -1;

    if (gfp->VBR == vbr_off) {
        if (gfp->free_format)
            gfc->bitrate_index = 0;
        else {
            gfc->bitrate_index = BitrateIndex(gfp->brate, gfp->version,
                                              gfp->out_samplerate);
            if (gfc->bitrate_index < 0)
                return -1;
        }
    }
    else {              /* choose a min/max bitrate for VBR */
        /* if the user didn't specify VBR_max_bitrate: */
        gfc->VBR_min_bitrate = 1; /* default: allow   8 kbps (MPEG-2) or  32 kbps (MPEG-1) */
        gfc->VBR_max_bitrate = 14; /* default: allow 160 kbps (MPEG-2) or 320 kbps (MPEG-1) */

        if (gfp->VBR_min_bitrate_kbps)
            if (
                (gfc->VBR_min_bitrate =
                 BitrateIndex(gfp->VBR_min_bitrate_kbps, gfp->version,
                              gfp->out_samplerate)) < 0) return -1;
        if (gfp->VBR_max_bitrate_kbps)
            if (
                (gfc->VBR_max_bitrate =
                 BitrateIndex(gfp->VBR_max_bitrate_kbps, gfp->version,
                              gfp->out_samplerate)) < 0) return -1;

        gfp->VBR_min_bitrate_kbps =
            bitrate_table[gfp->version][gfc->VBR_min_bitrate];
        gfp->VBR_max_bitrate_kbps =
            bitrate_table[gfp->version][gfc->VBR_max_bitrate];

        gfp->VBR_mean_bitrate_kbps =
            Min(bitrate_table[gfp->version][gfc->VBR_max_bitrate],
                gfp->VBR_mean_bitrate_kbps);
        gfp->VBR_mean_bitrate_kbps =
            Max(bitrate_table[gfp->version][gfc->VBR_min_bitrate],
                gfp->VBR_mean_bitrate_kbps);


    }

    /* Do not write VBR tag if VBR flag is not specified */
    if (gfp->VBR == vbr_off)
        gfp->bWriteVbrTag = 0;
    if (gfp->ogg)
        gfp->bWriteVbrTag = 0;
    if (gfp->analysis)
        gfp->bWriteVbrTag = 0;

    /* some file options not allowed if output is: not specified or stdout */
    if (gfc->pinfo != NULL)
        gfp->bWriteVbrTag = 0; /* disable Xing VBR tag */

    init_bit_stream_w(gfc);

    j = gfc->samplerate_index + (3 * gfp->version) + 6 * (gfp->out_samplerate <
                                                          16000);
    for (i = 0; i < SBMAX_l + 1; i++)
        gfc->scalefac_band.l[i] = sfBandIndex[j].l[i];
    for (i = 0; i < SBMAX_s + 1; i++)
        gfc->scalefac_band.s[i] = sfBandIndex[j].s[i];

    /* determine the mean bitrate for main data */
    if (gfp->version == 1)		/* MPEG 1 */
        gfc->sideinfo_len = (gfc->channels_out == 1) ? 4 + 17 : 4 + 32;
    else				/* MPEG 2 */
        gfc->sideinfo_len = (gfc->channels_out == 1) ? 4 + 9 : 4 + 17;

    if (gfp->error_protection)
        gfc->sideinfo_len += 2;


    /*
     *  Write id3v2 tag into the bitstream.
     *  This tag must be before the Xing VBR header.
     */
    if (!gfp->ogg)
        id3tag_write_v2(gfp);


    /* Write initial VBR Header to bitstream */
    if (gfp->bWriteVbrTag)
        InitVbrTag(gfp);

    if (gfp->version == 1) /* 0 indicates use lower sample freqs algorithm */
        gfc->is_mpeg1 = 1; /* yes */
    else
        gfc->is_mpeg1 = 0; /* no */

    /* estimate total frames.  */
    gfp->totalframes =
        2 + gfp->num_samples / (gfc->resample_ratio * gfp->framesize);
    gfc->Class_ID = LAME_ID;

    if (gfp->exp_nspsytune & 1) {
        int     i;

        gfc->nsPsy.use = 1;
        gfc->nsPsy.safejoint = (gfp->exp_nspsytune & 2) != 0;
        for (i = 0; i < 19; i++)
            gfc->nsPsy.pefirbuf[i] = 700;

        if (gfp->VBR == vbr_mtrh || gfp->VBR == vbr_mt) {
            ERRORF(gfc, "\n**** nspsytune doesn't support --vbr-new **** \n\n");
            gfp->VBR = vbr_rh;
        }

        if (gfp->ATHtype == -1)
            gfp->ATHtype = 0;

        gfc->nsPsy.bass = gfc->nsPsy.alto = gfc->nsPsy.treble = 0;

        i = (gfp->exp_nspsytune >> 2) & 63;
        if (i >= 32)
            i -= 64;
        gfc->nsPsy.bass = pow(10, i / 4.0 / 10.0);
        i = (gfp->exp_nspsytune >> 8) & 63;
        if (i >= 32)
            i -= 64;
        gfc->nsPsy.alto = pow(10, i / 4.0 / 10.0);
        i = (gfp->exp_nspsytune >> 14) & 63;
        if (i >= 32)
            i -= 64;
        gfc->nsPsy.treble = pow(10, i / 4.0 / 10.0);
    }

    switch (gfp->VBR) {
    case vbr_mtrh:
        /*  default quality for --vbr-mtrh is 1
         */
        if (gfp->quality < 0)
            gfp->quality = 1;

        /*  tonality
         */
        if (gfp->cwlimit <= 0)
            gfp->cwlimit = 0.454 * gfp->out_samplerate;

        /*  fall through */
    case vbr_mt:
        /*  use Gaby's ATH for vbr-mtrh by default
         */
        if (gfp->ATHtype == -1)
            gfp->ATHtype = 2;

        /*  fall through */
    case vbr_rh:
        /*  use Roel's tweaked Gaby-ATH for VBR by default
         */
        if (gfp->ATHtype == -1)
            gfp->ATHtype = 2;

        /*  automatic ATH adjustment on, VBR modes need it
         */
        gfc->ATH->use_adjust = 1;

        /*  sfb21 extra only with MPEG-1 at higher sampling rates
         */
        gfc->sfb21_extra = (gfp->out_samplerate > 44000);

        /*  VBR needs at least the output of GPSYCHO,
         *  so we have to garantee that by setting a minimum
         *  quality level, actually level 5 does it.
         *  the -v and -V x settings switch the quality to level 2
         *  you would have to add a -q 5 to reduce the quality
         *  down to level 5
         */
        if (gfp->quality > 5)
            gfp->quality = 5;

        /*  default quality setting is 2
         */
        if (gfp->quality < 0)
            gfp->quality = 2;

        /*  allow left and right channels to have different block types
         */
        gfp->allow_diff_short = 1;
        break;
    default:
        /*  automatic ATH adjustment off, not so important for CBR code
         */
        gfc->ATH->use_adjust = 0;

        /*  use Frank's ATH for CBR/ABR by default
         */
        if (gfp->ATHtype == -1)
            gfp->ATHtype = 2;

        /*  no sfb21 extra with CBR code
         */
        gfc->sfb21_extra = 0;

        /*  default quality setting for CBR/ABR is 5
         */
        if (gfp->quality < 0)
            gfp->quality = 5;
        break;
    }

    /* initialize internal qval settings */
    lame_init_qval(gfp);

#ifdef KLEMM_44
    gfc->mfbuf[0] = (sample_t *) calloc(sizeof(sample_t), MFSIZE);
    gfc->mfbuf[1] = (sample_t *) calloc(sizeof(sample_t), MFSIZE);
    gfc->sampfreq_in = unround_samplefrequency(gfp->in_samplerate);
    gfc->sampfreq_out = gfp->out_samplerate;
    gfc->resample_in = resample_open(gfc->sampfreq_in, gfc->sampfreq_out,
	-1 .0 /* Auto */ , 32);
#endif
    return 0;
}

/*}}}*/
/* void          lame_print_config              (lame_global_flags *gfp)                                                                                          *//*{{{ */

/*
 *  print_config
 *
 *  Prints some selected information about the coding parameters via
 *  the macro command MSGF(), which is currently mapped to lame_errorf
 *  (reports via a error function?), which is a printf-like function
 *  for <stderr>.
 */

void
lame_print_config(const lame_global_flags * gfp)
{
    lame_internal_flags *gfc = gfp->internal_flags;
    double  out_samplerate = gfp->out_samplerate;
    double  in_samplerate = gfp->out_samplerate * gfc->resample_ratio;

    MSGF(gfc, "mp3enc (from lame version %s (%s))\n", get_lame_version(), get_lame_url());

    if (gfc->CPU_features.MMX
        || gfc->CPU_features.AMD_3DNow
        || gfc->CPU_features.SIMD || gfc->CPU_features.SIMD2) {
        MSGF(gfc, "CPU features:");

        if (gfc->CPU_features.i387)
            MSGF(gfc, " i387");
        if (gfc->CPU_features.MMX)
#ifdef MMX_choose_table
            MSGF(gfc, ", MMX (ASM used)");
#else
            MSGF(gfc, ", MMX");
#endif
        if (gfc->CPU_features.AMD_3DNow)
            MSGF(gfc, ", 3DNow!");
        if (gfc->CPU_features.SIMD)
            MSGF(gfc, ", SIMD");
        if (gfc->CPU_features.SIMD2)
            MSGF(gfc, ", SIMD2");
        MSGF(gfc, "\n");
    }

    if (gfp->num_channels == 2 && gfc->channels_out == 1 /* mono */ ) {
        MSGF
            (gfc,
             "Autoconverting from stereo to mono. Setting encoding to mono mode.\n");
    }

    if (gfc->resample_ratio != 1.) {
        MSGF(gfc, "Resampling:  input %g kHz  output %g kHz\n",
             1.e-3 * in_samplerate, 1.e-3 * out_samplerate);
    }

    if (gfc->filter_type == 0) {
        if (gfc->highpass2 > 0.)
            MSGF
                (gfc,
                 "Using polyphase highpass filter, transition band: %5.0f Hz - %5.0f Hz\n",
                 0.5 * gfc->highpass1 * out_samplerate,
                 0.5 * gfc->highpass2 * out_samplerate);
        if (gfc->lowpass1 > 0.) {
            MSGF
                (gfc,
                 "Using polyphase lowpass  filter, transition band: %5.0f Hz - %5.0f Hz\n",
                 0.5 * gfc->lowpass1 * out_samplerate,
                 0.5 * gfc->lowpass2 * out_samplerate);
        }
        else {
            MSGF(gfc, "polyphase lowpass filter disabled\n");
        }
    }
    else {
        MSGF(gfc, "polyphase filters disabled\n");
    }

    if (gfp->free_format) {
        MSGF(gfc,
             "Warning: many decoders cannot handle free format bitstreams\n");
        if (gfp->brate > 320) {
            MSGF
                (gfc,
                 "Warning: many decoders cannot handle free format bitrates >320 kbps (see documentation)\n");
        }
    }
}


/* int           lame_encode_frame              (lame_global_flags *gfp, sample_t inbuf_l[],sample_t inbuf_r[], char *mp3buf, int mp3buf_size)                    *//*{{{ */

/* routine to feed exactly one frame (gfp->framesize) worth of data to the
encoding engine.  All buffering, resampling, etc, handled by calling
program.
*/
int
lame_encode_frame(lame_global_flags * gfp,
                  sample_t inbuf_l[], sample_t inbuf_r[],
                  unsigned char *mp3buf, int mp3buf_size)
{
    int     ret;
    if (gfp->ogg) {
#ifdef HAVE_VORBIS
        ret = lame_encode_ogg_frame(gfp, inbuf_l, inbuf_r, mp3buf, mp3buf_size);
#else
        return -5;      /* wanna encode ogg without vorbis */
#endif
    }
    else {
        ret = lame_encode_mp3_frame(gfp, inbuf_l, inbuf_r, mp3buf, mp3buf_size);
    }

    /* check to see if we underestimated totalframes */
    gfp->frameNum++;
    if (gfp->totalframes < gfp->frameNum)
        gfp->totalframes = gfp->frameNum;
    return ret;
}

/*}}}*/
/* int           lame_encode_buffer             (lame_global_flags* gfp, short int buffer_l[], short int buffer_r[], int nsamples, char* mp3buf, int mp3buf_size )*//*{{{ */



/*
 * THE MAIN LAME ENCODING INTERFACE
 * mt 3/00
 *
 * input pcm data, output (maybe) mp3 frames.
 * This routine handles all buffering, resampling and filtering for you.
 * The required mp3buffer_size can be computed from num_samples,
 * samplerate and encoding rate, but here is a worst case estimate:
 *
 * mp3buffer_size in bytes = 1.25*num_samples + 7200
 *
 * return code = number of bytes output in mp3buffer.  can be 0
*/
int
lame_encode_buffer_sample_t(lame_global_flags * gfp,
                   sample_t buffer_l[],
                   sample_t buffer_r[],
                   int nsamples, unsigned char *mp3buf, const int mp3buf_size)
{
    lame_internal_flags *gfc = gfp->internal_flags;
    int     mp3size = 0, ret, i, ch, mf_needed;
    sample_t *mfbuf[2];
    sample_t *in_buffer[2];

    if (gfc->Class_ID != LAME_ID)
        return -3;

    if (nsamples == 0)
        return 0;

    in_buffer[0]=buffer_l;
    in_buffer[1]=buffer_r;


    /* some sanity checks */
#if ENCDELAY < MDCTDELAY
# error ENCDELAY is less than MDCTDELAY, see encoder.h
#endif
#if FFTOFFSET > BLKSIZE
# error FFTOFFSET is greater than BLKSIZE, see encoder.h
#endif

    mf_needed = BLKSIZE + gfp->framesize - FFTOFFSET; /* amount needed for FFT */
    mf_needed = Max(mf_needed, 286 + 576 * (1 + gfc->mode_gr)); /* amount needed for MDCT/filterbank */
    assert(MFSIZE >= mf_needed);

    mfbuf[0] = gfc->mfbuf[0];
    mfbuf[1] = gfc->mfbuf[1];

    if (gfp->num_channels == 2 && gfc->channels_out == 1) {
        /* downsample to mono */
        for (i = 0; i < nsamples; ++i) {
            in_buffer[0][i] =
                0.5 * ((FLOAT8) in_buffer[0][i] + in_buffer[1][i]);
            in_buffer[1][i] = 0.0;
        }
    }


    while (nsamples > 0) {
        int     n_in = 0;    /* number of input samples processed with fill_buffer */
        int     n_out = 0;   /* number of samples output with fill_buffer */
        /* n_in <> n_out if we are resampling */

        /* copy in new samples into mfbuf, with resampling & scaling if necessary */
        fill_buffer(gfp, mfbuf, in_buffer, nsamples, &n_in, &n_out);

        /* update in_buffer counters */
        nsamples -= n_in;
        in_buffer[0] += n_in;
        if (gfc->channels_out == 2)
            in_buffer[1] += n_in;

        /* update mfbuf[] counters */
        gfc->mf_size += n_out;
        assert(gfc->mf_size <= MFSIZE);
        gfc->mf_samples_to_encode += n_out;


        if (gfc->mf_size >= mf_needed) {
            /* encode the frame.  */
            ret =
                lame_encode_frame(gfp, mfbuf[0], mfbuf[1], mp3buf, mp3buf_size);

            if (ret < 0)
                goto retr;
            mp3buf += ret;
            mp3size += ret;

            /* shift out old samples */
            gfc->mf_size -= gfp->framesize;
            gfc->mf_samples_to_encode -= gfp->framesize;
            for (ch = 0; ch < gfc->channels_out; ch++)
                for (i = 0; i < gfc->mf_size; i++)
                    mfbuf[ch][i] = mfbuf[ch][i + gfp->framesize];
        }
    }
    assert(nsamples == 0);
    ret = mp3size;

  retr:
    return ret;
}


int
lame_encode_buffer(lame_global_flags * gfp,
                   const short int buffer_l[],
                   const short int buffer_r[],
                   int nsamples, unsigned char *mp3buf, const int mp3buf_size)
{
    lame_internal_flags *gfc = gfp->internal_flags;
    int     ret, i;
    sample_t *in_buffer[2];

    if (gfc->Class_ID != LAME_ID)
        return -3;

    if (nsamples == 0)
        return 0;

    in_buffer[0] = calloc(sizeof(sample_t), nsamples);
    in_buffer[1] = calloc(sizeof(sample_t), nsamples);

    if (in_buffer[0] == NULL || in_buffer[1] == NULL) {
        ERRORF(gfc, "Error: can't allocate in_buffer buffer\n");
        return -2;
    }

    /* make a copy of input buffer, changing type to sample_t */
    for (i = 0; i < nsamples; i++) {
        in_buffer[0][i] = buffer_l[i];
        in_buffer[1][i] = buffer_r[i];
    }

    ret = lame_encode_buffer_sample_t(gfp,in_buffer[0],in_buffer[1],
				      nsamples, mp3buf, mp3buf_size);

    free(in_buffer[0]);
    free(in_buffer[1]);
    return ret;
}


int
lame_encode_buffer_float(lame_global_flags * gfp,
                   const float buffer_l[],
                   const float buffer_r[],
                   int nsamples, unsigned char *mp3buf, const int mp3buf_size)
{
    lame_internal_flags *gfc = gfp->internal_flags;
    int     ret, i;
    sample_t *in_buffer[2];

    if (gfc->Class_ID != LAME_ID)
        return -3;

    if (nsamples == 0)
        return 0;

    in_buffer[0] = calloc(sizeof(sample_t), nsamples);
    in_buffer[1] = calloc(sizeof(sample_t), nsamples);

    if (in_buffer[0] == NULL || in_buffer[1] == NULL) {
        ERRORF(gfc, "Error: can't allocate in_buffer buffer\n");
        return -2;
    }

    /* make a copy of input buffer, changing type to sample_t */
    for (i = 0; i < nsamples; i++) {
        in_buffer[0][i] = buffer_l[i];
        in_buffer[1][i] = buffer_r[i];
    }

    ret = lame_encode_buffer_sample_t(gfp,in_buffer[0],in_buffer[1],
				      nsamples, mp3buf, mp3buf_size);

    free(in_buffer[0]);
    free(in_buffer[1]);
    return ret;
}



int
lame_encode_buffer_long(lame_global_flags * gfp,
                   const long buffer_l[],
                   const long buffer_r[],
                   int nsamples, unsigned char *mp3buf, const int mp3buf_size)
{
    lame_internal_flags *gfc = gfp->internal_flags;
    int     ret, i;
    sample_t *in_buffer[2];

    if (gfc->Class_ID != LAME_ID)
        return -3;

    if (nsamples == 0)
        return 0;

    in_buffer[0] = calloc(sizeof(sample_t), nsamples);
    in_buffer[1] = calloc(sizeof(sample_t), nsamples);

    if (in_buffer[0] == NULL || in_buffer[1] == NULL) {
        ERRORF(gfc, "Error: can't allocate in_buffer buffer\n");
        return -2;
    }

    /* make a copy of input buffer, changing type to sample_t */
    for (i = 0; i < nsamples; i++) {
        in_buffer[0][i] = buffer_l[i];
        in_buffer[1][i] = buffer_r[i];
    }

    ret = lame_encode_buffer_sample_t(gfp,in_buffer[0],in_buffer[1],
				      nsamples, mp3buf, mp3buf_size);

    free(in_buffer[0]);
    free(in_buffer[1]);
    return ret;
}











int
lame_encode_buffer_interleaved(lame_global_flags * gfp,
                               short int buffer[],
                               int nsamples,
                               unsigned char *mp3buf, int mp3buf_size)
{
    int     ret, i;
    short int *buffer_l;
    short int *buffer_r;

    buffer_l = malloc(sizeof(short int) * nsamples);
    buffer_r = malloc(sizeof(short int) * nsamples);
    if (buffer_l == NULL || buffer_r == NULL) {
        return -2;
    }
    for (i = 0; i < nsamples; i++) {
        buffer_l[i] = buffer[2 * i];
        buffer_r[i] = buffer[2 * i + 1];
    }
    ret =
        lame_encode_buffer(gfp, buffer_l, buffer_r, nsamples, mp3buf,
                           mp3buf_size);
    free(buffer_l);
    free(buffer_r);
    return ret;

}


/*}}}*/
/* int           lame_encode                    (lame_global_flags* gfp, short int in_buffer[2][1152], char* mp3buf, int size )                                   *//*{{{ */


/* old LAME interface.  use lame_encode_buffer instead */

int
lame_encode(lame_global_flags * const gfp,
            const short int in_buffer[2][1152],
            unsigned char *const mp3buf, const int size)
{
    lame_internal_flags *gfc = gfp->internal_flags;

    if (gfc->Class_ID != LAME_ID)
        return -3;

    return lame_encode_buffer(gfp, in_buffer[0], in_buffer[1], gfp->framesize,
                              mp3buf, size);
}

/*}}}*/
/* int           lame_encode_flush              (lame_global_flags* gfp, char* mp3buffer, int mp3buffer_size )                                                    *//*{{{ */

/**/
/* flush internal mp3 buffers,                                   */
/**/

int
lame_encode_flush(lame_global_flags * gfp,
                  unsigned char *mp3buffer, int mp3buffer_size)
{
    short int buffer[2][1152];
    int     imp3 = 0, mp3count, mp3buffer_size_remaining;
    lame_internal_flags *gfc = gfp->internal_flags;

    memset(buffer, 0, sizeof(buffer));
    mp3count = 0;

    while (gfc->mf_samples_to_encode > 0) {

        mp3buffer_size_remaining = mp3buffer_size - mp3count;

        /* if user specifed buffer size = 0, dont check size */
        if (mp3buffer_size == 0)
            mp3buffer_size_remaining = 0;

        /* send in a frame of 0 padding until all internal sample buffers
         * are flushed
         */
        imp3 = lame_encode_buffer(gfp, buffer[0], buffer[1], gfp->framesize,
                                  mp3buffer, mp3buffer_size_remaining);
        /* don't count the above padding: */
        gfc->mf_samples_to_encode -= gfp->framesize;

        if (imp3 < 0) {
            /* some type of fatal error */
            return imp3;
        }
        mp3buffer += imp3;
        mp3count += imp3;
    }

    mp3buffer_size_remaining = mp3buffer_size - mp3count;
    /* if user specifed buffer size = 0, dont check size */
    if (mp3buffer_size == 0)
        mp3buffer_size_remaining = 0;

    if (gfp->ogg) {
#ifdef HAVE_VORBIS
        /* ogg related stuff */
        imp3 = lame_encode_ogg_finish(gfp, mp3buffer, mp3buffer_size_remaining);
#endif
    }
    else {
        /* mp3 related stuff.  bit buffer might still contain some mp3 data */
        flush_bitstream(gfp);
        /* write a id3 tag to the bitstream */
        id3tag_write_v1(gfp);
        imp3 = copy_buffer(mp3buffer, mp3buffer_size_remaining, &gfc->bs);
    }

    if (imp3 < 0) {
        return imp3;
    }
    mp3count += imp3;
    return mp3count;
}

/*}}}*/
/* void          lame_close                     (lame_global_flags *gfp)                                                                                          *//*{{{ */

/*
 *
 *      lame_close ()
 *
 *  frees internal buffers
 *
 */

int
lame_close(lame_global_flags * gfp)
{
    lame_internal_flags *gfc = gfp->internal_flags;

    if (gfc->Class_ID != LAME_ID)
        return -3;

    gfc->Class_ID = 0;

    // this routien will free all malloc'd data in gfc, and then free gfc:
    freegfc(gfc);

    gfp->internal_flags = NULL;

    if (gfp->lame_allocated_gfp)
        free(gfp);

    return 0;
}


/*}}}*/
/* int           lame_encode_finish             (lame_global_flags* gfp, char* mp3buffer, int mp3buffer_size )                                                    *//*{{{ */


/**/
/* flush internal mp3 buffers, and free internal buffers         */
/**/

int
lame_encode_finish(lame_global_flags * gfp,
                   unsigned char *mp3buffer, int mp3buffer_size)
{
    int     ret = lame_encode_flush(gfp, mp3buffer, mp3buffer_size);

    lame_close(gfp);

    return ret;
}

/*}}}*/
/* void          lame_mp3_tags_fid              (lame_global_flags *gfp,FILE *fpStream)                                                                           *//*{{{ */

/**/
/* write VBR Xing header, and ID3 version 1 tag, if asked for    */
/**/
void
lame_mp3_tags_fid(lame_global_flags * gfp, FILE * fpStream)
{
    if (gfp->bWriteVbrTag && (gfp->VBR != vbr_off)) {
        /* Map VBR_q to Xing quality value: 0=worst, 100=best */
        int     nQuality = ((9-gfp->VBR_q) * 100) / 9;

        /* Write Xing header again */
        if (fpStream && !fseek(fpStream, 0, SEEK_SET))
            PutVbrTag(gfp, fpStream, nQuality);
    }


}
/*}}}*/
/* lame_global_flags *lame_init                 (void)                                                                                                            *//*{{{ */

lame_global_flags *
lame_init(void)
{
    lame_global_flags *gfp;
    int     ret;

    gfp = calloc(1, sizeof(lame_global_flags));
    if (gfp == NULL)
        return NULL;

    ret = lame_init_old(gfp);
    if (ret != 0) {
        free(gfp);
        return NULL;
    }

    gfp->lame_allocated_gfp = 1;
    return gfp;
}

/*}}}*/
/* int           lame_init_old                  (lame_global_flags *gfp)                                                                                          *//*{{{ */

/* initialize mp3 encoder */
int
lame_init_old(lame_global_flags * gfp)
{
    lame_internal_flags *gfc;

    disable_FPE();      // disable floating point exceptions

    memset(gfp, 0, sizeof(lame_global_flags));

    if (NULL ==
        (gfc = gfp->internal_flags =
         calloc(1, sizeof(lame_internal_flags)))) return -1;

    /* Global flags.  set defaults here for non-zero values */
    /* see lame.h for description */
    /* set integer values to -1 to mean that LAME will compute the
     * best value, UNLESS the calling program as set it
     * (and the value is no longer -1)
     */


    gfp->mode = NOT_SET;
    gfp->original = 1;
    gfp->in_samplerate = 1000 * 44.1;
    gfp->num_channels = 2;
    gfp->num_samples = MAX_U_32_NUM;

    gfp->bWriteVbrTag = 1;
    gfp->quality = -1;
    gfp->allow_diff_short = -1;

    gfp->lowpassfreq = 0;
    gfp->highpassfreq = 0;
    gfp->lowpasswidth = -1;
    gfp->highpasswidth = -1;

    gfp->padding_type = 2;
    gfp->VBR = vbr_off;
    gfp->VBR_q = 4;
    gfp->VBR_mean_bitrate_kbps = 128;
    gfp->VBR_min_bitrate_kbps = 0;
    gfp->VBR_max_bitrate_kbps = 0;
    gfp->VBR_hard_min = 0;


    gfc->resample_ratio = 1;
    gfc->lowpass_band = 32;
    gfc->highpass_band = -1;
    gfc->VBR_min_bitrate = 1; /* not  0 ????? */
    gfc->VBR_max_bitrate = 13; /* not 14 ????? */

    gfc->OldValue[0] = 180;
    gfc->OldValue[1] = 180;
    gfc->CurrentStep = 4;
    gfc->masking_lower = 1;

    gfp->ATHtype = -1;  /* default = -1 = set in lame_init_params */
    gfp->useTemporal = 1;

    /* The reason for
     *       int mf_samples_to_encode = ENCDELAY + 288;
     * ENCDELAY = internal encoder delay.  And then we have to add 288
     * because of the 50% MDCT overlap.  A 576 MDCT granule decodes to
     * 1152 samples.  To synthesize the 576 samples centered under this granule
     * we need the previous granule for the first 288 samples (no problem), and
     * the next granule for the next 288 samples (not possible if this is last
     * granule).  So we need to pad with 288 samples to make sure we can
     * encode the 576 samples we are interested in.
     */
    gfc->mf_samples_to_encode = ENCDELAY + 288;
    gfc->mf_size = ENCDELAY - MDCTDELAY; /* we pad input with this many 0's */

#ifdef KLEMM_44
    /* XXX: this wasn't protectes by KLEMM_44 initially! */
    gfc->last_ampl = gfc->ampl = +1.0;
#endif

    return 0;
}

/*}}}*/

/*
 *
 *  some simple statistics
 *
 *  Robert Hegemann 2000-10-11
 *
 */

/*  histogram of used bitrate indexes:
 *  One has to weight them to calculate the average bitrate in kbps
 *
 *  bitrate indices:
 *  there are 14 possible bitrate indices, 0 has the special meaning
 *  "free format" which is not possible to mix with VBR and 15 is forbidden
 *  anyway.
 *
 *  stereo modes:
 *  0: LR   number of left-right encoded frames
 *  1: LR-I number of left-right and intensity encoded frames
 *  2: MS   number of mid-side encoded frames
 *  3: MS-I number of mid-side and intensity encoded frames
 *
 *  4: number of encoded frames
 *
 */

void
lame_bitrate_hist(const lame_global_flags * const gfp, int bitrate_count[14])
{
    const lame_internal_flags *gfc;
    int     i;

    if (NULL == bitrate_count)
        return;
    if (NULL == gfp)
        return;
    gfc = gfp->internal_flags;
    if (NULL == gfc)
        return;

    for (i = 0; i < 14; i++)
        bitrate_count[i] = gfc->bitrate_stereoMode_Hist[i + 1][4];
}


void
lame_bitrate_kbps(const lame_global_flags * const gfp, int bitrate_kbps[14])
{
    const lame_internal_flags *gfc;
    int     i;

    if (NULL == bitrate_kbps)
        return;
    if (NULL == gfp)
        return;
    gfc = gfp->internal_flags;
    if (NULL == gfc)
        return;

    for (i = 0; i < 14; i++)
        bitrate_kbps[i] = bitrate_table[gfp->version][i + 1];
}



void
lame_stereo_mode_hist(const lame_global_flags * const gfp, int stmode_count[4])
{
    const lame_internal_flags *gfc;
    int     i;

    if (NULL == stmode_count)
        return;
    if (NULL == gfp)
        return;
    gfc = gfp->internal_flags;
    if (NULL == gfc)
        return;

    for (i = 0; i < 4; i++) {
        int     j, sum = 0;
        for (j = 0; j < 14; j++)
            sum += gfc->bitrate_stereoMode_Hist[j + 1][i];
        stmode_count[i] = sum;
    }
}



void
lame_bitrate_stereo_mode_hist(const lame_global_flags * const gfp,
                              int bitrate_stmode_count[14][4])
{
    const lame_internal_flags *gfc;
    int     i;
    int     j;

    if (NULL == bitrate_stmode_count)
        return;
    if (NULL == gfp)
        return;
    gfc = gfp->internal_flags;
    if (NULL == gfc)
        return;

    for (j = 0; j < 14; j++)
        for (i = 0; i < 4; i++)
            bitrate_stmode_count[j][i] = gfc->bitrate_stereoMode_Hist[j + 1][i];
}

/* end of lame.c */