ref: 479a31ae8f4a361b101aa203aa1c0822137708d7
dir: /sys/src/cmd/audio/oggenc/oggenc.c/
/********************************************************************
* *
* THIS FILE IS PART OF THE OggVorbis SOFTWARE CODEC SOURCE CODE. *
* USE, DISTRIBUTION AND REPRODUCTION OF THIS LIBRARY SOURCE IS *
* GOVERNED BY A BSD-STYLE SOURCE LICENSE INCLUDED WITH THIS SOURCE *
* IN 'COPYING'. PLEASE READ THESE TERMS BEFORE DISTRIBUTING. *
* *
* THE OggVorbis SOURCE CODE IS (C) COPYRIGHT 1994-2002 *
* by the XIPHOPHORUS Company http://www.xiph.org/ *
* *
********************************************************************
function: simple example encoder
last mod: $Id: encoder_example.c,v 1.50 2002/07/16 09:26:07 xiphmont Exp $
********************************************************************/
/* takes a stereo 16bit 44.1kHz RAW file from stdin and encodes it into
a Vorbis bitstream */
/* Note that this is POSIX, not ANSI, code */
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>
#include <math.h>
#include <vorbis/vorbisenc.h>
#define READ 1024
signed char readbuffer[READ*4+44]; /* out of the data segment, not the stack */
int main(){
ogg_stream_state os; /* take physical pages, weld into a logical
stream of packets */
ogg_page og; /* one Ogg bitstream page. Vorbis packets are inside */
ogg_packet op; /* one raw packet of data for decode */
vorbis_info vi; /* struct that stores all the static vorbis bitstream
settings */
vorbis_comment vc; /* struct that stores all the user comments */
vorbis_dsp_state vd; /* central working state for the packet->PCM decoder */
vorbis_block vb; /* local working space for packet->PCM decode */
int eos=0,ret;
int i, founddata;
/********** Encode setup ************/
vorbis_info_init(&vi);
/* choose an encoding mode. A few possibilities commented out, one
actually used: */
/*********************************************************************
Encoding using a VBR quality mode. The usable range is -.1
(lowest quality, smallest file) to 1. (highest quality, largest file).
Example quality mode .4: 44kHz stereo coupled, roughly 128kbps VBR
ret = vorbis_encode_init_vbr(&vi,2,44100,.4);
---------------------------------------------------------------------
Encoding using an average bitrate mode (ABR).
example: 44kHz stereo coupled, average 128kbps VBR
ret = vorbis_encode_init(&vi,2,44100,-1,128000,-1);
---------------------------------------------------------------------
Encode using a qulity mode, but select that quality mode by asking for
an approximate bitrate. This is not ABR, it is true VBR, but selected
using the bitrate interface, and then turning bitrate management off:
ret = ( vorbis_encode_setup_managed(&vi,2,44100,-1,128000,-1) ||
vorbis_encode_ctl(&vi,OV_ECTL_RATEMANAGE_AVG,NULL) ||
vorbis_encode_setup_init(&vi));
*********************************************************************/
ret=vorbis_encode_init_vbr(&vi,2,44100,.5);
/* do not continue if setup failed; this can happen if we ask for a
mode that libVorbis does not support (eg, too low a bitrate, etc,
will return 'OV_EIMPL') */
if(ret)exit(1);
/* add a comment */
vorbis_comment_init(&vc);
vorbis_comment_add_tag(&vc,"ENCODER","encoder_example.c");
/* set up the analysis state and auxiliary encoding storage */
vorbis_analysis_init(&vd,&vi);
vorbis_block_init(&vd,&vb);
/* set up our packet->stream encoder */
/* pick a random serial number; that way we can more likely build
chained streams just by concatenation */
srand(time(NULL));
ogg_stream_init(&os,rand());
/* Vorbis streams begin with three headers; the initial header (with
most of the codec setup parameters) which is mandated by the Ogg
bitstream spec. The second header holds any comment fields. The
third header holds the bitstream codebook. We merely need to
make the headers, then pass them to libvorbis one at a time;
libvorbis handles the additional Ogg bitstream constraints */
{
ogg_packet header;
ogg_packet header_comm;
ogg_packet header_code;
vorbis_analysis_headerout(&vd,&vc,&header,&header_comm,&header_code);
ogg_stream_packetin(&os,&header); /* automatically placed in its own
page */
ogg_stream_packetin(&os,&header_comm);
ogg_stream_packetin(&os,&header_code);
/* This ensures the actual
* audio data will start on a new page, as per spec
*/
while(!eos){
int result=ogg_stream_flush(&os,&og);
if(result==0)break;
fwrite(og.header,1,og.header_len,stdout);
fwrite(og.body,1,og.body_len,stdout);
}
}
while(!eos){
long i;
long bytes=fread(readbuffer,1,READ*4,stdin); /* stereo hardwired here */
if(bytes==0){
/* end of file. this can be done implicitly in the mainline,
but it's easier to see here in non-clever fashion.
Tell the library we're at end of stream so that it can handle
the last frame and mark end of stream in the output properly */
vorbis_analysis_wrote(&vd,0);
}else{
/* data to encode */
/* expose the buffer to submit data */
float **buffer=vorbis_analysis_buffer(&vd,READ);
/* uninterleave samples */
for(i=0;i<bytes/4;i++){
buffer[0][i]=((readbuffer[i*4+1]<<8)|
(0x00ff&(int)readbuffer[i*4]))/32768.f;
buffer[1][i]=((readbuffer[i*4+3]<<8)|
(0x00ff&(int)readbuffer[i*4+2]))/32768.f;
}
/* tell the library how much we actually submitted */
vorbis_analysis_wrote(&vd,i);
}
/* vorbis does some data preanalysis, then divvies up blocks for
more involved (potentially parallel) processing. Get a single
block for encoding now */
while(vorbis_analysis_blockout(&vd,&vb)==1){
fflush(stderr);
/* analysis, assume we want to use bitrate management */
vorbis_analysis(&vb,NULL);
vorbis_bitrate_addblock(&vb);
while(vorbis_bitrate_flushpacket(&vd,&op)){
/* weld the packet into the bitstream */
ogg_stream_packetin(&os,&op);
/* write out pages (if any) */
while(!eos){
int result=ogg_stream_pageout(&os,&og);
if(result==0)break;
fwrite(og.header,1,og.header_len,stdout);
fwrite(og.body,1,og.body_len,stdout);
/* this could be set above, but for illustrative purposes, I do
it here (to show that vorbis does know where the stream ends) */
if(ogg_page_eos(&og))eos=1;
}
}
}
}
/* clean up and exit. vorbis_info_clear() must be called last */
ogg_stream_clear(&os);
vorbis_block_clear(&vb);
vorbis_dsp_clear(&vd);
vorbis_comment_clear(&vc);
vorbis_info_clear(&vi);
/* ogg_page and ogg_packet structs always point to storage in
libvorbis. They're never freed or manipulated directly */
fprintf(stderr,"Done.\n");
return(0);
}