ref: 5c448c618a89ab8933838da1b5b97ed7c4a42e08
dir: /sys/src/cmd/gs/src/gdevdm24.c/
/* Copyright (C) 1992, 1996, 1997 Aladdin Enterprises. All rights reserved.
This software is provided AS-IS with no warranty, either express or
implied.
This software is distributed under license and may not be copied,
modified or distributed except as expressly authorized under the terms
of the license contained in the file LICENSE in this distribution.
For more information about licensing, please refer to
http://www.ghostscript.com/licensing/. For information on
commercial licensing, go to http://www.artifex.com/licensing/ or
contact Artifex Software, Inc., 101 Lucas Valley Road #110,
San Rafael, CA 94903, U.S.A., +1(415)492-9861.
*/
#include "gdevprn.h"
/* $Id: gdevdm24.c,v 1.8 2004/08/04 23:33:29 stefan Exp $*/
/* High-res 24Dot-matrix printer driver */
/* Supported printers
* NEC P6 and similar, implemented by Andreas Schwab (schwab@ls5.informatik.uni-dortmund.de)
* Epson LQ850, implemented by Christian Felsch (felsch@tu-harburg.d400.de)
*/
/* Driver for NEC P6 */
private dev_proc_print_page (necp6_print_page);
const gx_device_printer far_data gs_necp6_device =
prn_device (prn_std_procs, "necp6",
DEFAULT_WIDTH_10THS, DEFAULT_HEIGHT_10THS,
360, 360,
0, 0, 0.5, 0, /* margins */
1, necp6_print_page);
/* Driver for Epson LQ850 */
/* I've tested this driver on a BJ300 with LQ850 emulation and there it produce correct 360x360dpi output. */
private dev_proc_print_page (lq850_print_page);
const gx_device_printer gs_lq850_device =
prn_device (prn_std_procs, "lq850",
DEFAULT_WIDTH_10THS, DEFAULT_HEIGHT_10THS,
360, 360,
0, 0, 0.5, 0, /* margins */
1, lq850_print_page);
/* ------ Internal routines ------ */
/* Forward references */
private void dot24_output_run (byte *, int, int, FILE *);
private void dot24_improve_bitmap (byte *, int);
/* Send the page to the printer. */
private int
dot24_print_page (gx_device_printer *pdev, FILE *prn_stream, char *init_string, int init_len)
{
int xres = (int)pdev->x_pixels_per_inch;
int yres = (int)pdev->y_pixels_per_inch;
int x_high = (xres == 360);
int y_high = (yres == 360);
int bits_per_column = (y_high ? 48 : 24);
uint line_size = gdev_prn_raster (pdev);
uint in_size = line_size * bits_per_column;
byte *in = (byte *) gs_malloc (pdev->memory, in_size, 1, "dot24_print_page (in)");
uint out_size = ((pdev->width + 7) & -8) * 3;
byte *out = (byte *) gs_malloc (pdev->memory, out_size, 1, "dot24_print_page (out)");
int y_passes = (y_high ? 2 : 1);
int dots_per_space = xres / 10; /* pica space = 1/10" */
int bytes_per_space = dots_per_space * 3;
int skip = 0, lnum = 0, ypass;
/* Check allocations */
if (in == 0 || out == 0)
{
if (out)
gs_free (pdev->memory, (char *) out, out_size, 1, "dot24_print_page (out)");
if (in)
gs_free (pdev->memory, (char *) in, in_size, 1, "dot24_print_page (in)");
return_error (gs_error_VMerror);
}
/* Initialize the printer and reset the margins. */
fwrite (init_string, init_len - 1, sizeof (char), prn_stream);
fputc ((int) (pdev->width / pdev->x_pixels_per_inch * 10) + 2,
prn_stream);
/* Print lines of graphics */
while (lnum < pdev->height)
{
byte *inp;
byte *in_end;
byte *out_end;
byte *out_blk;
register byte *outp;
int lcnt;
/* Copy 1 scan line and test for all zero. */
gdev_prn_copy_scan_lines (pdev, lnum, in, line_size);
if (in[0] == 0
&& !memcmp ((char *) in, (char *) in + 1, line_size - 1))
{
lnum++;
skip += 2 - y_high;
continue;
}
/* Vertical tab to the appropriate position. */
while ((skip >> 1) > 255)
{
fputs ("\033J\377", prn_stream);
skip -= 255 * 2;
}
if (skip)
{
if (skip >> 1)
fprintf (prn_stream, "\033J%c", skip >> 1);
if (skip & 1)
fputc ('\n', prn_stream);
}
/* Copy the rest of the scan lines. */
if (y_high)
{
inp = in + line_size;
for (lcnt = 1; lcnt < 24; lcnt++, inp += line_size)
if (!gdev_prn_copy_scan_lines (pdev, lnum + lcnt * 2, inp,
line_size))
{
memset (inp, 0, (24 - lcnt) * line_size);
break;
}
inp = in + line_size * 24;
for (lcnt = 0; lcnt < 24; lcnt++, inp += line_size)
if (!gdev_prn_copy_scan_lines (pdev, lnum + lcnt * 2 + 1, inp,
line_size))
{
memset (inp, 0, (24 - lcnt) * line_size);
break;
}
}
else
{
lcnt = 1 + gdev_prn_copy_scan_lines (pdev, lnum + 1, in + line_size,
in_size - line_size);
if (lcnt < 24)
/* Pad with lines of zeros. */
memset (in + lcnt * line_size, 0, in_size - lcnt * line_size);
}
for (ypass = 0; ypass < y_passes; ypass++)
{
out_end = out;
inp = in;
if (ypass)
inp += line_size * 24;
in_end = inp + line_size;
for (; inp < in_end; inp++, out_end += 24)
{
memflip8x8 (inp, line_size, out_end, 3);
memflip8x8 (inp + line_size * 8, line_size, out_end + 1, 3);
memflip8x8 (inp + line_size * 16, line_size, out_end + 2, 3);
}
/* Remove trailing 0s. */
while (out_end - 3 >= out && out_end[-1] == 0
&& out_end[-2] == 0 && out_end[-3] == 0)
out_end -= 3;
for (out_blk = outp = out; outp < out_end;)
{
/* Skip a run of leading 0s. */
/* At least 10 are needed to make tabbing worth it. */
if (outp[0] == 0 && outp + 12 <= out_end
&& outp[1] == 0 && outp[2] == 0
&& outp[3] == 0 && outp[4] == 0 && outp[5] == 0
&& outp[6] == 0 && outp[7] == 0 && outp[8] == 0
&& outp[9] == 0 && outp[10] == 0 && outp[11] == 0)
{
byte *zp = outp;
int tpos;
byte *newp;
outp += 12;
while (outp + 3 <= out_end
&& outp[0] == 0 && outp[1] == 0 && outp[2] == 0)
outp += 3;
tpos = (outp - out) / bytes_per_space;
newp = out + tpos * bytes_per_space;
if (newp > zp + 10)
{
/* Output preceding bit data. */
/* only false at beginning of line */
if (zp > out_blk)
{
if (x_high)
dot24_improve_bitmap (out_blk, (int) (zp - out_blk));
dot24_output_run (out_blk, (int) (zp - out_blk),
x_high, prn_stream);
}
/* Tab over to the appropriate position. */
fprintf (prn_stream, "\033D%c%c\t", tpos, 0);
out_blk = outp = newp;
}
}
else
outp += 3;
}
if (outp > out_blk)
{
if (x_high)
dot24_improve_bitmap (out_blk, (int) (outp - out_blk));
dot24_output_run (out_blk, (int) (outp - out_blk), x_high,
prn_stream);
}
fputc ('\r', prn_stream);
if (ypass < y_passes - 1)
fputc ('\n', prn_stream);
}
skip = 48 - y_high;
lnum += bits_per_column;
}
/* Eject the page and reinitialize the printer */
fputs ("\f\033@", prn_stream);
fflush (prn_stream);
gs_free (pdev->memory, (char *) out, out_size, 1, "dot24_print_page (out)");
gs_free (pdev->memory, (char *) in, in_size, 1, "dot24_print_page (in)");
return 0;
}
/* Output a single graphics command. */
private void
dot24_output_run (byte *data, int count, int x_high, FILE *prn_stream)
{
int xcount = count / 3;
fputc (033, prn_stream);
fputc ('*', prn_stream);
fputc ((x_high ? 40 : 39), prn_stream);
fputc (xcount & 0xff, prn_stream);
fputc (xcount >> 8, prn_stream);
fwrite (data, 1, count, prn_stream);
}
/* If xdpi == 360, the P6 / LQ850 cannot print adjacent pixels. Clear the
second last pixel of every run of set pixels, so that the last pixel
is always printed. */
private void
dot24_improve_bitmap (byte *data, int count)
{
int i;
register byte *p = data + 6;
for (i = 6; i < count; i += 3, p += 3)
{
p[-6] &= ~(~p[0] & p[-3]);
p[-5] &= ~(~p[1] & p[-2]);
p[-4] &= ~(~p[2] & p[-1]);
}
p[-6] &= ~p[-3];
p[-5] &= ~p[-2];
p[-4] &= ~p[-1];
}
private int
necp6_print_page(gx_device_printer *pdev, FILE *prn_stream)
{
char necp6_init_string [] = "\033@\033P\033l\000\r\034\063\001\033Q";
return dot24_print_page(pdev, prn_stream, necp6_init_string, sizeof(necp6_init_string));
}
private int
lq850_print_page(gx_device_printer *pdev, FILE *prn_stream)
{
char lq850_init_string [] = "\033@\033P\033l\000\r\033\053\001\033Q";
return dot24_print_page(pdev, prn_stream, lq850_init_string, sizeof(lq850_init_string));
}