ref: b6251bff913972b5dfb421813fe97a5bfff3627f
dir: /sys/lib/python/asynchat.py/
# -*- Mode: Python; tab-width: 4 -*-
# Id: asynchat.py,v 2.26 2000/09/07 22:29:26 rushing Exp
# Author: Sam Rushing <rushing@nightmare.com>
# ======================================================================
# Copyright 1996 by Sam Rushing
#
# All Rights Reserved
#
# Permission to use, copy, modify, and distribute this software and
# its documentation for any purpose and without fee is hereby
# granted, provided that the above copyright notice appear in all
# copies and that both that copyright notice and this permission
# notice appear in supporting documentation, and that the name of Sam
# Rushing not be used in advertising or publicity pertaining to
# distribution of the software without specific, written prior
# permission.
#
# SAM RUSHING DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
# INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN
# NO EVENT SHALL SAM RUSHING BE LIABLE FOR ANY SPECIAL, INDIRECT OR
# CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
# OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
# NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
# ======================================================================
r"""A class supporting chat-style (command/response) protocols.
This class adds support for 'chat' style protocols - where one side
sends a 'command', and the other sends a response (examples would be
the common internet protocols - smtp, nntp, ftp, etc..).
The handle_read() method looks at the input stream for the current
'terminator' (usually '\r\n' for single-line responses, '\r\n.\r\n'
for multi-line output), calling self.found_terminator() on its
receipt.
for example:
Say you build an async nntp client using this class. At the start
of the connection, you'll have self.terminator set to '\r\n', in
order to process the single-line greeting. Just before issuing a
'LIST' command you'll set it to '\r\n.\r\n'. The output of the LIST
command will be accumulated (using your own 'collect_incoming_data'
method) up to the terminator, and then control will be returned to
you - by calling your self.found_terminator() method.
"""
import socket
import asyncore
from collections import deque
class async_chat (asyncore.dispatcher):
"""This is an abstract class. You must derive from this class, and add
the two methods collect_incoming_data() and found_terminator()"""
# these are overridable defaults
ac_in_buffer_size = 4096
ac_out_buffer_size = 4096
def __init__ (self, conn=None):
self.ac_in_buffer = ''
self.ac_out_buffer = ''
self.producer_fifo = fifo()
asyncore.dispatcher.__init__ (self, conn)
def collect_incoming_data(self, data):
raise NotImplementedError, "must be implemented in subclass"
def found_terminator(self):
raise NotImplementedError, "must be implemented in subclass"
def set_terminator (self, term):
"Set the input delimiter. Can be a fixed string of any length, an integer, or None"
self.terminator = term
def get_terminator (self):
return self.terminator
# grab some more data from the socket,
# throw it to the collector method,
# check for the terminator,
# if found, transition to the next state.
def handle_read (self):
try:
data = self.recv (self.ac_in_buffer_size)
except socket.error, why:
self.handle_error()
return
self.ac_in_buffer = self.ac_in_buffer + data
# Continue to search for self.terminator in self.ac_in_buffer,
# while calling self.collect_incoming_data. The while loop
# is necessary because we might read several data+terminator
# combos with a single recv(1024).
while self.ac_in_buffer:
lb = len(self.ac_in_buffer)
terminator = self.get_terminator()
if not terminator:
# no terminator, collect it all
self.collect_incoming_data (self.ac_in_buffer)
self.ac_in_buffer = ''
elif isinstance(terminator, int) or isinstance(terminator, long):
# numeric terminator
n = terminator
if lb < n:
self.collect_incoming_data (self.ac_in_buffer)
self.ac_in_buffer = ''
self.terminator = self.terminator - lb
else:
self.collect_incoming_data (self.ac_in_buffer[:n])
self.ac_in_buffer = self.ac_in_buffer[n:]
self.terminator = 0
self.found_terminator()
else:
# 3 cases:
# 1) end of buffer matches terminator exactly:
# collect data, transition
# 2) end of buffer matches some prefix:
# collect data to the prefix
# 3) end of buffer does not match any prefix:
# collect data
terminator_len = len(terminator)
index = self.ac_in_buffer.find(terminator)
if index != -1:
# we found the terminator
if index > 0:
# don't bother reporting the empty string (source of subtle bugs)
self.collect_incoming_data (self.ac_in_buffer[:index])
self.ac_in_buffer = self.ac_in_buffer[index+terminator_len:]
# This does the Right Thing if the terminator is changed here.
self.found_terminator()
else:
# check for a prefix of the terminator
index = find_prefix_at_end (self.ac_in_buffer, terminator)
if index:
if index != lb:
# we found a prefix, collect up to the prefix
self.collect_incoming_data (self.ac_in_buffer[:-index])
self.ac_in_buffer = self.ac_in_buffer[-index:]
break
else:
# no prefix, collect it all
self.collect_incoming_data (self.ac_in_buffer)
self.ac_in_buffer = ''
def handle_write (self):
self.initiate_send ()
def handle_close (self):
self.close()
def push (self, data):
self.producer_fifo.push (simple_producer (data))
self.initiate_send()
def push_with_producer (self, producer):
self.producer_fifo.push (producer)
self.initiate_send()
def readable (self):
"predicate for inclusion in the readable for select()"
return (len(self.ac_in_buffer) <= self.ac_in_buffer_size)
def writable (self):
"predicate for inclusion in the writable for select()"
# return len(self.ac_out_buffer) or len(self.producer_fifo) or (not self.connected)
# this is about twice as fast, though not as clear.
return not (
(self.ac_out_buffer == '') and
self.producer_fifo.is_empty() and
self.connected
)
def close_when_done (self):
"automatically close this channel once the outgoing queue is empty"
self.producer_fifo.push (None)
# refill the outgoing buffer by calling the more() method
# of the first producer in the queue
def refill_buffer (self):
while 1:
if len(self.producer_fifo):
p = self.producer_fifo.first()
# a 'None' in the producer fifo is a sentinel,
# telling us to close the channel.
if p is None:
if not self.ac_out_buffer:
self.producer_fifo.pop()
self.close()
return
elif isinstance(p, str):
self.producer_fifo.pop()
self.ac_out_buffer = self.ac_out_buffer + p
return
data = p.more()
if data:
self.ac_out_buffer = self.ac_out_buffer + data
return
else:
self.producer_fifo.pop()
else:
return
def initiate_send (self):
obs = self.ac_out_buffer_size
# try to refill the buffer
if (len (self.ac_out_buffer) < obs):
self.refill_buffer()
if self.ac_out_buffer and self.connected:
# try to send the buffer
try:
num_sent = self.send (self.ac_out_buffer[:obs])
if num_sent:
self.ac_out_buffer = self.ac_out_buffer[num_sent:]
except socket.error, why:
self.handle_error()
return
def discard_buffers (self):
# Emergencies only!
self.ac_in_buffer = ''
self.ac_out_buffer = ''
while self.producer_fifo:
self.producer_fifo.pop()
class simple_producer:
def __init__ (self, data, buffer_size=512):
self.data = data
self.buffer_size = buffer_size
def more (self):
if len (self.data) > self.buffer_size:
result = self.data[:self.buffer_size]
self.data = self.data[self.buffer_size:]
return result
else:
result = self.data
self.data = ''
return result
class fifo:
def __init__ (self, list=None):
if not list:
self.list = deque()
else:
self.list = deque(list)
def __len__ (self):
return len(self.list)
def is_empty (self):
return not self.list
def first (self):
return self.list[0]
def push (self, data):
self.list.append(data)
def pop (self):
if self.list:
return (1, self.list.popleft())
else:
return (0, None)
# Given 'haystack', see if any prefix of 'needle' is at its end. This
# assumes an exact match has already been checked. Return the number of
# characters matched.
# for example:
# f_p_a_e ("qwerty\r", "\r\n") => 1
# f_p_a_e ("qwertydkjf", "\r\n") => 0
# f_p_a_e ("qwerty\r\n", "\r\n") => <undefined>
# this could maybe be made faster with a computed regex?
# [answer: no; circa Python-2.0, Jan 2001]
# new python: 28961/s
# old python: 18307/s
# re: 12820/s
# regex: 14035/s
def find_prefix_at_end (haystack, needle):
l = len(needle) - 1
while l and not haystack.endswith(needle[:l]):
l -= 1
return l