ref: bafc196c4b07261923d4f197659a26d0919cdeae
dir: /sys/src/9/imx8/mem.c/
#include "u.h" #include "../port/lib.h" #include "mem.h" #include "dat.h" #include "fns.h" #define INITMAP (ROUND((uintptr)end + BY2PG, PGLSZ(1))-KZERO) /* * Create initial identity map in top-level page table * (L1BOT) for TTBR0. This page table is only used until * mmu1init() loads m->mmutop. */ void mmuidmap(uintptr *l1bot) { uintptr pa, pe, attr; /* VDRAM */ attr = PTEWRITE | PTEAF | PTEKERNEL | PTEUXN | PTESH(SHARE_INNER); pe = -KZERO; for(pa = VDRAM - KZERO; pa < pe; pa += PGLSZ(PTLEVELS-1)) l1bot[PTLX(pa, PTLEVELS-1)] = pa | PTEVALID | PTEBLOCK | attr; } /* * Create initial shared kernel page table (L1) for TTBR1. * This page table coveres the INITMAP and VIRTIO, * and later we fill the ram mappings in meminit(). */ void mmu0init(uintptr *l1) { uintptr va, pa, pe, attr; /* DRAM - INITMAP */ attr = PTEWRITE | PTEAF | PTEKERNEL | PTEUXN | PTESH(SHARE_INNER); pe = INITMAP; for(pa = VDRAM - KZERO, va = VDRAM; pa < pe; pa += PGLSZ(1), va += PGLSZ(1)) l1[PTL1X(va, 1)] = pa | PTEVALID | PTEBLOCK | attr; /* VIRTIO */ attr = PTEWRITE | PTEAF | PTEKERNEL | PTEUXN | PTEPXN | PTESH(SHARE_OUTER) | PTEDEVICE; pe = VDRAM - KZERO; for(pa = VIRTIO - KZERO, va = VIRTIO; pa < pe; pa += PGLSZ(1), va += PGLSZ(1)){ if(((pa|va) & PGLSZ(1)-1) != 0){ l1[PTL1X(va, 1)] = (uintptr)l1 | PTEVALID | PTETABLE; for(; pa < pe && ((va|pa) & PGLSZ(1)-1) != 0; pa += PGLSZ(0), va += PGLSZ(0)){ assert(l1[PTLX(va, 0)] == 0); l1[PTLX(va, 0)] = pa | PTEVALID | PTEPAGE | attr; } break; } l1[PTL1X(va, 1)] = pa | PTEVALID | PTEBLOCK | attr; } if(PTLEVELS > 2) for(va = KSEG0; va != 0; va += PGLSZ(2)) l1[PTL1X(va, 2)] = (uintptr)&l1[L1TABLEX(va, 1)] | PTEVALID | PTETABLE; if(PTLEVELS > 3) for(va = KSEG0; va != 0; va += PGLSZ(3)) l1[PTL1X(va, 3)] = (uintptr)&l1[L1TABLEX(va, 2)] | PTEVALID | PTETABLE; } void meminit(void) { /* DDR Memory (All modules) */ conf.mem[0].base = PGROUND((uintptr)end - KZERO); /* exclude uncached dram for ucalloc() */ conf.mem[0].limit = UCRAMBASE; conf.mem[1].base = UCRAMBASE+UCRAMSIZE; conf.mem[1].limit = 0x100000000ULL; /* DDR Memory (Quad-A53 only) */ conf.mem[2].base = 0x100000000ULL; conf.mem[2].limit = 0x140000000ULL; kmapram(conf.mem[0].base, conf.mem[0].limit); kmapram(conf.mem[1].base, conf.mem[1].limit); kmapram(conf.mem[2].base, conf.mem[2].limit); conf.mem[0].npage = (conf.mem[0].limit - conf.mem[0].base)/BY2PG; conf.mem[1].npage = (conf.mem[1].limit - conf.mem[1].base)/BY2PG; conf.mem[2].npage = (conf.mem[2].limit - conf.mem[2].base)/BY2PG; } static void* ucramalloc(usize size, uintptr align, uint attr) { static uintptr top = UCRAMBASE + UCRAMSIZE; static Lock lk; uintptr va, pg; lock(&lk); top -= size; size += top & align-1; top &= -align; if(top < UCRAMBASE) panic("ucramalloc: need %zd bytes", size); va = KZERO + top; pg = va & -BY2PG; if(pg != ((va+size) & -BY2PG)) mmukmap(pg | attr, pg - KZERO, PGROUND(size)); unlock(&lk); return (void*)va; } void* ucalloc(usize size) { return ucramalloc(size, 8, PTEUNCACHED); }