ref: c23504631008ce0bfaa5bec48acb2b04f4b49fd9
dir: /sys/src/ape/lib/openssl/crypto/des/asm/des_enc.m4/
! des_enc.m4
! des_enc.S (generated from des_enc.m4)
!
! UltraSPARC assembler version of the LibDES/SSLeay/OpenSSL des_enc.c file.
!
! Version 1.0. 32-bit version.
!
! June 8, 2000.
!
! Version 2.0. 32/64-bit, PIC-ification, blended CPU adaptation
! by Andy Polyakov.
!
! January 1, 2003.
!
! Assembler version: Copyright Svend Olaf Mikkelsen.
!
! Original C code: Copyright Eric A. Young.
!
! This code can be freely used by LibDES/SSLeay/OpenSSL users.
!
! The LibDES/SSLeay/OpenSSL copyright notices must be respected.
!
! This version can be redistributed.
!
! To expand the m4 macros: m4 -B 8192 des_enc.m4 > des_enc.S
!
! Global registers 1 to 5 are used. This is the same as done by the
! cc compiler. The UltraSPARC load/store little endian feature is used.
!
! Instruction grouping often refers to one CPU cycle.
!
! Assemble through gcc: gcc -c -mcpu=ultrasparc -o des_enc.o des_enc.S
!
! Assemble through cc: cc -c -xarch=v8plusa -o des_enc.o des_enc.S
!
! Performance improvement according to './apps/openssl speed des'
!
! 32-bit build:
! 23% faster than cc-5.2 -xarch=v8plus -xO5
! 115% faster than gcc-3.2.1 -m32 -mcpu=ultrasparc -O5
! 64-bit build:
! 50% faster than cc-5.2 -xarch=v9 -xO5
! 100% faster than gcc-3.2.1 -m64 -mcpu=ultrasparc -O5
!
.ident "des_enc.m4 2.1"
#if defined(__SUNPRO_C) && defined(__sparcv9)
# define ABI64 /* They've said -xarch=v9 at command line */
#elif defined(__GNUC__) && defined(__arch64__)
# define ABI64 /* They've said -m64 at command line */
#endif
#ifdef ABI64
.register %g2,#scratch
.register %g3,#scratch
# define FRAME -192
# define BIAS 2047
# define LDPTR ldx
# define STPTR stx
# define ARG0 128
# define ARGSZ 8
# ifndef OPENSSL_SYSNAME_ULTRASPARC
# define OPENSSL_SYSNAME_ULTRASPARC
# endif
#else
# define FRAME -96
# define BIAS 0
# define LDPTR ld
# define STPTR st
# define ARG0 68
# define ARGSZ 4
#endif
#define LOOPS 7
#define global0 %g0
#define global1 %g1
#define global2 %g2
#define global3 %g3
#define global4 %g4
#define global5 %g5
#define local0 %l0
#define local1 %l1
#define local2 %l2
#define local3 %l3
#define local4 %l4
#define local5 %l5
#define local7 %l6
#define local6 %l7
#define in0 %i0
#define in1 %i1
#define in2 %i2
#define in3 %i3
#define in4 %i4
#define in5 %i5
#define in6 %i6
#define in7 %i7
#define out0 %o0
#define out1 %o1
#define out2 %o2
#define out3 %o3
#define out4 %o4
#define out5 %o5
#define out6 %o6
#define out7 %o7
#define stub stb
changequote({,})
! Macro definitions:
! {ip_macro}
!
! The logic used in initial and final permutations is the same as in
! the C code. The permutations are done with a clever shift, xor, and
! technique.
!
! The macro also loads address sbox 1 to 5 to global 1 to 5, address
! sbox 6 to local6, and addres sbox 8 to out3.
!
! Rotates the halfs 3 left to bring the sbox bits in convenient positions.
!
! Loads key first round from address in parameter 5 to out0, out1.
!
! After the the original LibDES initial permutation, the resulting left
! is in the variable initially used for right and vice versa. The macro
! implements the possibility to keep the halfs in the original registers.
!
! parameter 1 left
! parameter 2 right
! parameter 3 result left (modify in first round)
! parameter 4 result right (use in first round)
! parameter 5 key address
! parameter 6 1/2 for include encryption/decryption
! parameter 7 1 for move in1 to in3
! parameter 8 1 for move in3 to in4, 2 for move in4 to in3
! parameter 9 1 for load ks3 and ks2 to in4 and in3
define(ip_macro, {
! {ip_macro}
! $1 $2 $4 $3 $5 $6 $7 $8 $9
ld [out2+256], local1
srl $2, 4, local4
xor local4, $1, local4
ifelse($7,1,{mov in1, in3},{nop})
ld [out2+260], local2
and local4, local1, local4
ifelse($8,1,{mov in3, in4},{})
ifelse($8,2,{mov in4, in3},{})
ld [out2+280], out4 ! loop counter
sll local4, 4, local1
xor $1, local4, $1
ld [out2+264], local3
srl $1, 16, local4
xor $2, local1, $2
ifelse($9,1,{LDPTR KS3, in4},{})
xor local4, $2, local4
nop !sethi %hi(DES_SPtrans), global1 ! sbox addr
ifelse($9,1,{LDPTR KS2, in3},{})
and local4, local2, local4
nop !or global1, %lo(DES_SPtrans), global1 ! sbox addr
sll local4, 16, local1
xor $2, local4, $2
srl $2, 2, local4
xor $1, local1, $1
sethi %hi(16711680), local5
xor local4, $1, local4
and local4, local3, local4
or local5, 255, local5
sll local4, 2, local2
xor $1, local4, $1
srl $1, 8, local4
xor $2, local2, $2
xor local4, $2, local4
add global1, 768, global4
and local4, local5, local4
add global1, 1024, global5
ld [out2+272], local7
sll local4, 8, local1
xor $2, local4, $2
srl $2, 1, local4
xor $1, local1, $1
ld [$5], out0 ! key 7531
xor local4, $1, local4
add global1, 256, global2
ld [$5+4], out1 ! key 8642
and local4, local7, local4
add global1, 512, global3
sll local4, 1, local1
xor $1, local4, $1
sll $1, 3, local3
xor $2, local1, $2
sll $2, 3, local2
add global1, 1280, local6 ! address sbox 8
srl $1, 29, local4
add global1, 1792, out3 ! address sbox 8
srl $2, 29, local1
or local4, local3, $4
or local2, local1, $3
ifelse($6, 1, {
ld [out2+284], local5 ! 0x0000FC00 used in the rounds
or local2, local1, $3
xor $4, out0, local1
call .des_enc.1
and local1, 252, local1
},{})
ifelse($6, 2, {
ld [out2+284], local5 ! 0x0000FC00 used in the rounds
or local2, local1, $3
xor $4, out0, local1
call .des_dec.1
and local1, 252, local1
},{})
})
! {rounds_macro}
!
! The logic used in the DES rounds is the same as in the C code,
! except that calculations for sbox 1 and sbox 5 begin before
! the previous round is finished.
!
! In each round one half (work) is modified based on key and the
! other half (use).
!
! In this version we do two rounds in a loop repeated 7 times
! and two rounds seperately.
!
! One half has the bits for the sboxes in the following positions:
!
! 777777xx555555xx333333xx111111xx
!
! 88xx666666xx444444xx222222xx8888
!
! The bits for each sbox are xor-ed with the key bits for that box.
! The above xx bits are cleared, and the result used for lookup in
! the sbox table. Each sbox entry contains the 4 output bits permuted
! into 32 bits according to the P permutation.
!
! In the description of DES, left and right are switched after
! each round, except after last round. In this code the original
! left and right are kept in the same register in all rounds, meaning
! that after the 16 rounds the result for right is in the register
! originally used for left.
!
! parameter 1 first work (left in first round)
! parameter 2 first use (right in first round)
! parameter 3 enc/dec 1/-1
! parameter 4 loop label
! parameter 5 key address register
! parameter 6 optional address for key next encryption/decryption
! parameter 7 not empty for include retl
!
! also compares in2 to 8
define(rounds_macro, {
! {rounds_macro}
! $1 $2 $3 $4 $5 $6 $7 $8 $9
xor $2, out0, local1
ld [out2+284], local5 ! 0x0000FC00
ba $4
and local1, 252, local1
.align 32
$4:
! local6 is address sbox 6
! out3 is address sbox 8
! out4 is loop counter
ld [global1+local1], local1
xor $2, out1, out1 ! 8642
xor $2, out0, out0 ! 7531
fmovs %f0, %f0 ! fxor used for alignment
srl out1, 4, local0 ! rotate 4 right
and out0, local5, local3 ! 3
fmovs %f0, %f0
ld [$5+$3*8], local7 ! key 7531 next round
srl local3, 8, local3 ! 3
and local0, 252, local2 ! 2
fmovs %f0, %f0
ld [global3+local3],local3 ! 3
sll out1, 28, out1 ! rotate
xor $1, local1, $1 ! 1 finished, local1 now sbox 7
ld [global2+local2], local2 ! 2
srl out0, 24, local1 ! 7
or out1, local0, out1 ! rotate
ldub [out2+local1], local1 ! 7 (and 0xFC)
srl out1, 24, local0 ! 8
and out1, local5, local4 ! 4
ldub [out2+local0], local0 ! 8 (and 0xFC)
srl local4, 8, local4 ! 4
xor $1, local2, $1 ! 2 finished local2 now sbox 6
ld [global4+local4],local4 ! 4
srl out1, 16, local2 ! 6
xor $1, local3, $1 ! 3 finished local3 now sbox 5
ld [out3+local0],local0 ! 8
and local2, 252, local2 ! 6
add global1, 1536, local5 ! address sbox 7
ld [local6+local2], local2 ! 6
srl out0, 16, local3 ! 5
xor $1, local4, $1 ! 4 finished
ld [local5+local1],local1 ! 7
and local3, 252, local3 ! 5
xor $1, local0, $1 ! 8 finished
ld [global5+local3],local3 ! 5
xor $1, local2, $1 ! 6 finished
subcc out4, 1, out4
ld [$5+$3*8+4], out0 ! key 8642 next round
xor $1, local7, local2 ! sbox 5 next round
xor $1, local1, $1 ! 7 finished
srl local2, 16, local2 ! sbox 5 next round
xor $1, local3, $1 ! 5 finished
ld [$5+$3*16+4], out1 ! key 8642 next round again
and local2, 252, local2 ! sbox5 next round
! next round
xor $1, local7, local7 ! 7531
ld [global5+local2], local2 ! 5
srl local7, 24, local3 ! 7
xor $1, out0, out0 ! 8642
ldub [out2+local3], local3 ! 7 (and 0xFC)
srl out0, 4, local0 ! rotate 4 right
and local7, 252, local1 ! 1
sll out0, 28, out0 ! rotate
xor $2, local2, $2 ! 5 finished local2 used
srl local0, 8, local4 ! 4
and local0, 252, local2 ! 2
ld [local5+local3], local3 ! 7
srl local0, 16, local5 ! 6
or out0, local0, out0 ! rotate
ld [global2+local2], local2 ! 2
srl out0, 24, local0
ld [$5+$3*16], out0 ! key 7531 next round
and local4, 252, local4 ! 4
and local5, 252, local5 ! 6
ld [global4+local4], local4 ! 4
xor $2, local3, $2 ! 7 finished local3 used
and local0, 252, local0 ! 8
ld [local6+local5], local5 ! 6
xor $2, local2, $2 ! 2 finished local2 now sbox 3
srl local7, 8, local2 ! 3 start
ld [out3+local0], local0 ! 8
xor $2, local4, $2 ! 4 finished
and local2, 252, local2 ! 3
ld [global1+local1], local1 ! 1
xor $2, local5, $2 ! 6 finished local5 used
ld [global3+local2], local2 ! 3
xor $2, local0, $2 ! 8 finished
add $5, $3*16, $5 ! enc add 8, dec add -8 to key pointer
ld [out2+284], local5 ! 0x0000FC00
xor $2, out0, local4 ! sbox 1 next round
xor $2, local1, $2 ! 1 finished
xor $2, local2, $2 ! 3 finished
#ifdef OPENSSL_SYSNAME_ULTRASPARC
bne,pt %icc, $4
#else
bne $4
#endif
and local4, 252, local1 ! sbox 1 next round
! two rounds more:
ld [global1+local1], local1
xor $2, out1, out1
xor $2, out0, out0
srl out1, 4, local0 ! rotate
and out0, local5, local3
ld [$5+$3*8], local7 ! key 7531
srl local3, 8, local3
and local0, 252, local2
ld [global3+local3],local3
sll out1, 28, out1 ! rotate
xor $1, local1, $1 ! 1 finished, local1 now sbox 7
ld [global2+local2], local2
srl out0, 24, local1
or out1, local0, out1 ! rotate
ldub [out2+local1], local1
srl out1, 24, local0
and out1, local5, local4
ldub [out2+local0], local0
srl local4, 8, local4
xor $1, local2, $1 ! 2 finished local2 now sbox 6
ld [global4+local4],local4
srl out1, 16, local2
xor $1, local3, $1 ! 3 finished local3 now sbox 5
ld [out3+local0],local0
and local2, 252, local2
add global1, 1536, local5 ! address sbox 7
ld [local6+local2], local2
srl out0, 16, local3
xor $1, local4, $1 ! 4 finished
ld [local5+local1],local1
and local3, 252, local3
xor $1, local0, $1
ld [global5+local3],local3
xor $1, local2, $1 ! 6 finished
cmp in2, 8
ifelse($6,{}, {}, {ld [out2+280], out4}) ! loop counter
xor $1, local7, local2 ! sbox 5 next round
xor $1, local1, $1 ! 7 finished
ld [$5+$3*8+4], out0
srl local2, 16, local2 ! sbox 5 next round
xor $1, local3, $1 ! 5 finished
and local2, 252, local2
! next round (two rounds more)
xor $1, local7, local7 ! 7531
ld [global5+local2], local2
srl local7, 24, local3
xor $1, out0, out0 ! 8642
ldub [out2+local3], local3
srl out0, 4, local0 ! rotate
and local7, 252, local1
sll out0, 28, out0 ! rotate
xor $2, local2, $2 ! 5 finished local2 used
srl local0, 8, local4
and local0, 252, local2
ld [local5+local3], local3
srl local0, 16, local5
or out0, local0, out0 ! rotate
ld [global2+local2], local2
srl out0, 24, local0
ifelse($6,{}, {}, {ld [$6], out0}) ! key next encryption/decryption
and local4, 252, local4
and local5, 252, local5
ld [global4+local4], local4
xor $2, local3, $2 ! 7 finished local3 used
and local0, 252, local0
ld [local6+local5], local5
xor $2, local2, $2 ! 2 finished local2 now sbox 3
srl local7, 8, local2 ! 3 start
ld [out3+local0], local0
xor $2, local4, $2
and local2, 252, local2
ld [global1+local1], local1
xor $2, local5, $2 ! 6 finished local5 used
ld [global3+local2], local2
srl $1, 3, local3
xor $2, local0, $2
ifelse($6,{}, {}, {ld [$6+4], out1}) ! key next encryption/decryption
sll $1, 29, local4
xor $2, local1, $2
ifelse($7,{}, {}, {retl})
xor $2, local2, $2
})
! {fp_macro}
!
! parameter 1 right (original left)
! parameter 2 left (original right)
! parameter 3 1 for optional store to [in0]
! parameter 4 1 for load input/output address to local5/7
!
! The final permutation logic switches the halfes, meaning that
! left and right ends up the the registers originally used.
define(fp_macro, {
! {fp_macro}
! $1 $2 $3 $4 $5 $6 $7 $8 $9
! initially undo the rotate 3 left done after initial permutation
! original left is received shifted 3 right and 29 left in local3/4
sll $2, 29, local1
or local3, local4, $1
srl $2, 3, $2
sethi %hi(0x55555555), local2
or $2, local1, $2
or local2, %lo(0x55555555), local2
srl $2, 1, local3
sethi %hi(0x00ff00ff), local1
xor local3, $1, local3
or local1, %lo(0x00ff00ff), local1
and local3, local2, local3
sethi %hi(0x33333333), local4
sll local3, 1, local2
xor $1, local3, $1
srl $1, 8, local3
xor $2, local2, $2
xor local3, $2, local3
or local4, %lo(0x33333333), local4
and local3, local1, local3
sethi %hi(0x0000ffff), local1
sll local3, 8, local2
xor $2, local3, $2
srl $2, 2, local3
xor $1, local2, $1
xor local3, $1, local3
or local1, %lo(0x0000ffff), local1
and local3, local4, local3
sethi %hi(0x0f0f0f0f), local4
sll local3, 2, local2
ifelse($4,1, {LDPTR INPUT, local5})
xor $1, local3, $1
ifelse($4,1, {LDPTR OUTPUT, local7})
srl $1, 16, local3
xor $2, local2, $2
xor local3, $2, local3
or local4, %lo(0x0f0f0f0f), local4
and local3, local1, local3
sll local3, 16, local2
xor $2, local3, local1
srl local1, 4, local3
xor $1, local2, $1
xor local3, $1, local3
and local3, local4, local3
sll local3, 4, local2
xor $1, local3, $1
! optional store:
ifelse($3,1, {st $1, [in0]})
xor local1, local2, $2
ifelse($3,1, {st $2, [in0+4]})
})
! {fp_ip_macro}
!
! Does initial permutation for next block mixed with
! final permutation for current block.
!
! parameter 1 original left
! parameter 2 original right
! parameter 3 left ip
! parameter 4 right ip
! parameter 5 1: load ks1/ks2 to in3/in4, add 120 to in4
! 2: mov in4 to in3
!
! also adds -8 to length in2 and loads loop counter to out4
define(fp_ip_macro, {
! {fp_ip_macro}
! $1 $2 $3 $4 $5 $6 $7 $8 $9
define({temp1},{out4})
define({temp2},{local3})
define({ip1},{local1})
define({ip2},{local2})
define({ip4},{local4})
define({ip5},{local5})
! $1 in local3, local4
ld [out2+256], ip1
sll out5, 29, temp1
or local3, local4, $1
srl out5, 3, $2
ifelse($5,2,{mov in4, in3})
ld [out2+272], ip5
srl $4, 4, local0
or $2, temp1, $2
srl $2, 1, temp1
xor temp1, $1, temp1
and temp1, ip5, temp1
xor local0, $3, local0
sll temp1, 1, temp2
xor $1, temp1, $1
and local0, ip1, local0
add in2, -8, in2
sll local0, 4, local7
xor $3, local0, $3
ld [out2+268], ip4
srl $1, 8, temp1
xor $2, temp2, $2
ld [out2+260], ip2
srl $3, 16, local0
xor $4, local7, $4
xor temp1, $2, temp1
xor local0, $4, local0
and temp1, ip4, temp1
and local0, ip2, local0
sll temp1, 8, temp2
xor $2, temp1, $2
sll local0, 16, local7
xor $4, local0, $4
srl $2, 2, temp1
xor $1, temp2, $1
ld [out2+264], temp2 ! ip3
srl $4, 2, local0
xor $3, local7, $3
xor temp1, $1, temp1
xor local0, $3, local0
and temp1, temp2, temp1
and local0, temp2, local0
sll temp1, 2, temp2
xor $1, temp1, $1
sll local0, 2, local7
xor $3, local0, $3
srl $1, 16, temp1
xor $2, temp2, $2
srl $3, 8, local0
xor $4, local7, $4
xor temp1, $2, temp1
xor local0, $4, local0
and temp1, ip2, temp1
and local0, ip4, local0
sll temp1, 16, temp2
xor $2, temp1, local4
sll local0, 8, local7
xor $4, local0, $4
srl $4, 1, local0
xor $3, local7, $3
srl local4, 4, temp1
xor local0, $3, local0
xor $1, temp2, $1
and local0, ip5, local0
sll local0, 1, local7
xor temp1, $1, temp1
xor $3, local0, $3
xor $4, local7, $4
sll $3, 3, local5
and temp1, ip1, temp1
sll temp1, 4, temp2
xor $1, temp1, $1
ifelse($5,1,{LDPTR KS2, in4})
sll $4, 3, local2
xor local4, temp2, $2
! reload since used as temporar:
ld [out2+280], out4 ! loop counter
srl $3, 29, local0
ifelse($5,1,{add in4, 120, in4})
ifelse($5,1,{LDPTR KS1, in3})
srl $4, 29, local7
or local0, local5, $4
or local2, local7, $3
})
! {load_little_endian}
!
! parameter 1 address
! parameter 2 destination left
! parameter 3 destination right
! parameter 4 temporar
! parameter 5 label
define(load_little_endian, {
! {load_little_endian}
! $1 $2 $3 $4 $5 $6 $7 $8 $9
! first in memory to rightmost in register
#ifdef OPENSSL_SYSNAME_ULTRASPARC
andcc $1, 3, global0
bne,pn %icc, $5
nop
lda [$1] 0x88, $2
add $1, 4, $4
ba,pt %icc, $5a
lda [$4] 0x88, $3
#endif
$5:
ldub [$1+3], $2
ldub [$1+2], $4
sll $2, 8, $2
or $2, $4, $2
ldub [$1+1], $4
sll $2, 8, $2
or $2, $4, $2
ldub [$1+0], $4
sll $2, 8, $2
or $2, $4, $2
ldub [$1+3+4], $3
ldub [$1+2+4], $4
sll $3, 8, $3
or $3, $4, $3
ldub [$1+1+4], $4
sll $3, 8, $3
or $3, $4, $3
ldub [$1+0+4], $4
sll $3, 8, $3
or $3, $4, $3
$5a:
})
! {load_little_endian_inc}
!
! parameter 1 address
! parameter 2 destination left
! parameter 3 destination right
! parameter 4 temporar
! parameter 4 label
!
! adds 8 to address
define(load_little_endian_inc, {
! {load_little_endian_inc}
! $1 $2 $3 $4 $5 $6 $7 $8 $9
! first in memory to rightmost in register
#ifdef OPENSSL_SYSNAME_ULTRASPARC
andcc $1, 3, global0
bne,pn %icc, $5
nop
lda [$1] 0x88, $2
add $1, 4, $1
lda [$1] 0x88, $3
ba,pt %icc, $5a
add $1, 4, $1
#endif
$5:
ldub [$1+3], $2
ldub [$1+2], $4
sll $2, 8, $2
or $2, $4, $2
ldub [$1+1], $4
sll $2, 8, $2
or $2, $4, $2
ldub [$1+0], $4
sll $2, 8, $2
or $2, $4, $2
ldub [$1+3+4], $3
add $1, 8, $1
ldub [$1+2+4-8], $4
sll $3, 8, $3
or $3, $4, $3
ldub [$1+1+4-8], $4
sll $3, 8, $3
or $3, $4, $3
ldub [$1+0+4-8], $4
sll $3, 8, $3
or $3, $4, $3
$5a:
})
! {load_n_bytes}
!
! Loads 1 to 7 bytes little endian
! Remaining bytes are zeroed.
!
! parameter 1 address
! parameter 2 length
! parameter 3 destination register left
! parameter 4 destination register right
! parameter 5 temp
! parameter 6 temp2
! parameter 7 label
! parameter 8 return label
define(load_n_bytes, {
! {load_n_bytes}
! $1 $2 $5 $6 $7 $8 $7 $8 $9
$7.0: call .+8
sll $2, 2, $6
add %o7,$7.jmp.table-$7.0,$5
add $5, $6, $5
mov 0, $4
ld [$5], $5
jmp %o7+$5
mov 0, $3
$7.7:
ldub [$1+6], $5
sll $5, 16, $5
or $3, $5, $3
$7.6:
ldub [$1+5], $5
sll $5, 8, $5
or $3, $5, $3
$7.5:
ldub [$1+4], $5
or $3, $5, $3
$7.4:
ldub [$1+3], $5
sll $5, 24, $5
or $4, $5, $4
$7.3:
ldub [$1+2], $5
sll $5, 16, $5
or $4, $5, $4
$7.2:
ldub [$1+1], $5
sll $5, 8, $5
or $4, $5, $4
$7.1:
ldub [$1+0], $5
ba $8
or $4, $5, $4
.align 4
$7.jmp.table:
.word 0
.word $7.1-$7.0
.word $7.2-$7.0
.word $7.3-$7.0
.word $7.4-$7.0
.word $7.5-$7.0
.word $7.6-$7.0
.word $7.7-$7.0
})
! {store_little_endian}
!
! parameter 1 address
! parameter 2 source left
! parameter 3 source right
! parameter 4 temporar
define(store_little_endian, {
! {store_little_endian}
! $1 $2 $3 $4 $5 $6 $7 $8 $9
! rightmost in register to first in memory
#ifdef OPENSSL_SYSNAME_ULTRASPARC
andcc $1, 3, global0
bne,pn %icc, $5
nop
sta $2, [$1] 0x88
add $1, 4, $4
ba,pt %icc, $5a
sta $3, [$4] 0x88
#endif
$5:
and $2, 255, $4
stub $4, [$1+0]
srl $2, 8, $4
and $4, 255, $4
stub $4, [$1+1]
srl $2, 16, $4
and $4, 255, $4
stub $4, [$1+2]
srl $2, 24, $4
stub $4, [$1+3]
and $3, 255, $4
stub $4, [$1+0+4]
srl $3, 8, $4
and $4, 255, $4
stub $4, [$1+1+4]
srl $3, 16, $4
and $4, 255, $4
stub $4, [$1+2+4]
srl $3, 24, $4
stub $4, [$1+3+4]
$5a:
})
! {store_n_bytes}
!
! Stores 1 to 7 bytes little endian
!
! parameter 1 address
! parameter 2 length
! parameter 3 source register left
! parameter 4 source register right
! parameter 5 temp
! parameter 6 temp2
! parameter 7 label
! parameter 8 return label
define(store_n_bytes, {
! {store_n_bytes}
! $1 $2 $5 $6 $7 $8 $7 $8 $9
$7.0: call .+8
sll $2, 2, $6
add %o7,$7.jmp.table-$7.0,$5
add $5, $6, $5
ld [$5], $5
jmp %o7+$5
nop
$7.7:
srl $3, 16, $5
and $5, 0xff, $5
stub $5, [$1+6]
$7.6:
srl $3, 8, $5
and $5, 0xff, $5
stub $5, [$1+5]
$7.5:
and $3, 0xff, $5
stub $5, [$1+4]
$7.4:
srl $4, 24, $5
stub $5, [$1+3]
$7.3:
srl $4, 16, $5
and $5, 0xff, $5
stub $5, [$1+2]
$7.2:
srl $4, 8, $5
and $5, 0xff, $5
stub $5, [$1+1]
$7.1:
and $4, 0xff, $5
ba $8
stub $5, [$1]
.align 4
$7.jmp.table:
.word 0
.word $7.1-$7.0
.word $7.2-$7.0
.word $7.3-$7.0
.word $7.4-$7.0
.word $7.5-$7.0
.word $7.6-$7.0
.word $7.7-$7.0
})
define(testvalue,{1})
define(register_init, {
! For test purposes:
sethi %hi(testvalue), local0
or local0, %lo(testvalue), local0
ifelse($1,{},{}, {mov local0, $1})
ifelse($2,{},{}, {mov local0, $2})
ifelse($3,{},{}, {mov local0, $3})
ifelse($4,{},{}, {mov local0, $4})
ifelse($5,{},{}, {mov local0, $5})
ifelse($6,{},{}, {mov local0, $6})
ifelse($7,{},{}, {mov local0, $7})
ifelse($8,{},{}, {mov local0, $8})
mov local0, local1
mov local0, local2
mov local0, local3
mov local0, local4
mov local0, local5
mov local0, local7
mov local0, local6
mov local0, out0
mov local0, out1
mov local0, out2
mov local0, out3
mov local0, out4
mov local0, out5
mov local0, global1
mov local0, global2
mov local0, global3
mov local0, global4
mov local0, global5
})
.section ".text"
.align 32
.des_enc:
! key address in3
! loads key next encryption/decryption first round from [in4]
rounds_macro(in5, out5, 1, .des_enc.1, in3, in4, retl)
.align 32
.des_dec:
! implemented with out5 as first parameter to avoid
! register exchange in ede modes
! key address in4
! loads key next encryption/decryption first round from [in3]
rounds_macro(out5, in5, -1, .des_dec.1, in4, in3, retl)
! void DES_encrypt1(data, ks, enc)
! *******************************
.align 32
.global DES_encrypt1
.type DES_encrypt1,#function
DES_encrypt1:
save %sp, FRAME, %sp
call .PIC.me.up
mov .PIC.me.up-(.-4),out0
ld [in0], in5 ! left
cmp in2, 0 ! enc
#ifdef OPENSSL_SYSNAME_ULTRASPARC
be,pn %icc, .encrypt.dec ! enc/dec
#else
be .encrypt.dec
#endif
ld [in0+4], out5 ! right
! parameter 6 1/2 for include encryption/decryption
! parameter 7 1 for move in1 to in3
! parameter 8 1 for move in3 to in4, 2 for move in4 to in3
ip_macro(in5, out5, in5, out5, in3, 0, 1, 1)
rounds_macro(in5, out5, 1, .des_encrypt1.1, in3, in4) ! in4 not used
fp_macro(in5, out5, 1) ! 1 for store to [in0]
ret
restore
.encrypt.dec:
add in1, 120, in3 ! use last subkey for first round
! parameter 6 1/2 for include encryption/decryption
! parameter 7 1 for move in1 to in3
! parameter 8 1 for move in3 to in4, 2 for move in4 to in3
ip_macro(in5, out5, out5, in5, in4, 2, 0, 1) ! include dec, ks in4
fp_macro(out5, in5, 1) ! 1 for store to [in0]
ret
restore
.DES_encrypt1.end:
.size DES_encrypt1,.DES_encrypt1.end-DES_encrypt1
! void DES_encrypt2(data, ks, enc)
!*********************************
! encrypts/decrypts without initial/final permutation
.align 32
.global DES_encrypt2
.type DES_encrypt2,#function
DES_encrypt2:
save %sp, FRAME, %sp
call .PIC.me.up
mov .PIC.me.up-(.-4),out0
! Set sbox address 1 to 6 and rotate halfs 3 left
! Errors caught by destest? Yes. Still? *NO*
!sethi %hi(DES_SPtrans), global1 ! address sbox 1
!or global1, %lo(DES_SPtrans), global1 ! sbox 1
add global1, 256, global2 ! sbox 2
add global1, 512, global3 ! sbox 3
ld [in0], out5 ! right
add global1, 768, global4 ! sbox 4
add global1, 1024, global5 ! sbox 5
ld [in0+4], in5 ! left
add global1, 1280, local6 ! sbox 6
add global1, 1792, out3 ! sbox 8
! rotate
sll in5, 3, local5
mov in1, in3 ! key address to in3
sll out5, 3, local7
srl in5, 29, in5
srl out5, 29, out5
add in5, local5, in5
add out5, local7, out5
cmp in2, 0
! we use our own stackframe
#ifdef OPENSSL_SYSNAME_ULTRASPARC
be,pn %icc, .encrypt2.dec ! decryption
#else
be .encrypt2.dec
#endif
STPTR in0, [%sp+BIAS+ARG0+0*ARGSZ]
ld [in3], out0 ! key 7531 first round
mov LOOPS, out4 ! loop counter
ld [in3+4], out1 ! key 8642 first round
sethi %hi(0x0000FC00), local5
call .des_enc
mov in3, in4
! rotate
sll in5, 29, in0
srl in5, 3, in5
sll out5, 29, in1
add in5, in0, in5
srl out5, 3, out5
LDPTR [%sp+BIAS+ARG0+0*ARGSZ], in0
add out5, in1, out5
st in5, [in0]
st out5, [in0+4]
ret
restore
.encrypt2.dec:
add in3, 120, in4
ld [in4], out0 ! key 7531 first round
mov LOOPS, out4 ! loop counter
ld [in4+4], out1 ! key 8642 first round
sethi %hi(0x0000FC00), local5
mov in5, local1 ! left expected in out5
mov out5, in5
call .des_dec
mov local1, out5
.encrypt2.finish:
! rotate
sll in5, 29, in0
srl in5, 3, in5
sll out5, 29, in1
add in5, in0, in5
srl out5, 3, out5
LDPTR [%sp+BIAS+ARG0+0*ARGSZ], in0
add out5, in1, out5
st out5, [in0]
st in5, [in0+4]
ret
restore
.DES_encrypt2.end:
.size DES_encrypt2, .DES_encrypt2.end-DES_encrypt2
! void DES_encrypt3(data, ks1, ks2, ks3)
! **************************************
.align 32
.global DES_encrypt3
.type DES_encrypt3,#function
DES_encrypt3:
save %sp, FRAME, %sp
call .PIC.me.up
mov .PIC.me.up-(.-4),out0
ld [in0], in5 ! left
add in2, 120, in4 ! ks2
ld [in0+4], out5 ! right
mov in3, in2 ! save ks3
! parameter 6 1/2 for include encryption/decryption
! parameter 7 1 for mov in1 to in3
! parameter 8 1 for mov in3 to in4
! parameter 9 1 for load ks3 and ks2 to in4 and in3
ip_macro(in5, out5, in5, out5, in3, 1, 1, 0, 0)
call .des_dec
mov in2, in3 ! preload ks3
call .des_enc
nop
fp_macro(in5, out5, 1)
ret
restore
.DES_encrypt3.end:
.size DES_encrypt3,.DES_encrypt3.end-DES_encrypt3
! void DES_decrypt3(data, ks1, ks2, ks3)
! **************************************
.align 32
.global DES_decrypt3
.type DES_decrypt3,#function
DES_decrypt3:
save %sp, FRAME, %sp
call .PIC.me.up
mov .PIC.me.up-(.-4),out0
ld [in0], in5 ! left
add in3, 120, in4 ! ks3
ld [in0+4], out5 ! right
mov in2, in3 ! ks2
! parameter 6 1/2 for include encryption/decryption
! parameter 7 1 for mov in1 to in3
! parameter 8 1 for mov in3 to in4
! parameter 9 1 for load ks3 and ks2 to in4 and in3
ip_macro(in5, out5, out5, in5, in4, 2, 0, 0, 0)
call .des_enc
add in1, 120, in4 ! preload ks1
call .des_dec
nop
fp_macro(out5, in5, 1)
ret
restore
.DES_decrypt3.end:
.size DES_decrypt3,.DES_decrypt3.end-DES_decrypt3
.align 256
.type .des_and,#object
.size .des_and,284
.des_and:
! This table is used for AND 0xFC when it is known that register
! bits 8-31 are zero. Makes it possible to do three arithmetic
! operations in one cycle.
.byte 0, 0, 0, 0, 4, 4, 4, 4
.byte 8, 8, 8, 8, 12, 12, 12, 12
.byte 16, 16, 16, 16, 20, 20, 20, 20
.byte 24, 24, 24, 24, 28, 28, 28, 28
.byte 32, 32, 32, 32, 36, 36, 36, 36
.byte 40, 40, 40, 40, 44, 44, 44, 44
.byte 48, 48, 48, 48, 52, 52, 52, 52
.byte 56, 56, 56, 56, 60, 60, 60, 60
.byte 64, 64, 64, 64, 68, 68, 68, 68
.byte 72, 72, 72, 72, 76, 76, 76, 76
.byte 80, 80, 80, 80, 84, 84, 84, 84
.byte 88, 88, 88, 88, 92, 92, 92, 92
.byte 96, 96, 96, 96, 100, 100, 100, 100
.byte 104, 104, 104, 104, 108, 108, 108, 108
.byte 112, 112, 112, 112, 116, 116, 116, 116
.byte 120, 120, 120, 120, 124, 124, 124, 124
.byte 128, 128, 128, 128, 132, 132, 132, 132
.byte 136, 136, 136, 136, 140, 140, 140, 140
.byte 144, 144, 144, 144, 148, 148, 148, 148
.byte 152, 152, 152, 152, 156, 156, 156, 156
.byte 160, 160, 160, 160, 164, 164, 164, 164
.byte 168, 168, 168, 168, 172, 172, 172, 172
.byte 176, 176, 176, 176, 180, 180, 180, 180
.byte 184, 184, 184, 184, 188, 188, 188, 188
.byte 192, 192, 192, 192, 196, 196, 196, 196
.byte 200, 200, 200, 200, 204, 204, 204, 204
.byte 208, 208, 208, 208, 212, 212, 212, 212
.byte 216, 216, 216, 216, 220, 220, 220, 220
.byte 224, 224, 224, 224, 228, 228, 228, 228
.byte 232, 232, 232, 232, 236, 236, 236, 236
.byte 240, 240, 240, 240, 244, 244, 244, 244
.byte 248, 248, 248, 248, 252, 252, 252, 252
! 5 numbers for initil/final permutation
.word 0x0f0f0f0f ! offset 256
.word 0x0000ffff ! 260
.word 0x33333333 ! 264
.word 0x00ff00ff ! 268
.word 0x55555555 ! 272
.word 0 ! 276
.word LOOPS ! 280
.word 0x0000FC00 ! 284
.PIC.DES_SPtrans:
.word %r_disp32(DES_SPtrans)
! input: out0 offset between .PIC.me.up and caller
! output: out0 pointer to .PIC.me.up
! out2 pointer to .des_and
! global1 pointer to DES_SPtrans
.align 32
.PIC.me.up:
add out0,%o7,out0 ! pointer to .PIC.me.up
#if 1
ld [out0+(.PIC.DES_SPtrans-.PIC.me.up)],global1
add global1,(.PIC.DES_SPtrans-.PIC.me.up),global1
add global1,out0,global1
#else
# ifdef OPENSSL_PIC
! In case anybody wonders why this code is same for both ABI.
! To start with it is not. Do note LDPTR below. But of course
! you must be wondering why the rest of it does not contain
! things like %hh, %hm and %lm. Well, those are needed only
! if OpenSSL library *itself* will become larger than 4GB,
! which is not going to happen any time soon.
sethi %hi(DES_SPtrans),global1
or global1,%lo(DES_SPtrans),global1
sethi %hi(_GLOBAL_OFFSET_TABLE_-(.PIC.me.up-.)),out2
add global1,out0,global1
add out2,%lo(_GLOBAL_OFFSET_TABLE_-(.PIC.me.up-.)),out2
LDPTR [out2+global1],global1
# elif 0
setn DES_SPtrans,out2,global1 ! synthetic instruction !
# elif defined(ABI64)
sethi %hh(DES_SPtrans),out2
or out2,%hm(DES_SPtrans),out2
sethi %lm(DES_SPtrans),global1
or global1,%lo(DES_SPtrans),global1
sllx out2,32,out2
or out2,global1,global1
# else
sethi %hi(DES_SPtrans),global1
or global1,%lo(DES_SPtrans),global1
# endif
#endif
retl
add out0,.des_and-.PIC.me.up,out2
! void DES_ncbc_encrypt(input, output, length, schedule, ivec, enc)
! *****************************************************************
.align 32
.global DES_ncbc_encrypt
.type DES_ncbc_encrypt,#function
DES_ncbc_encrypt:
save %sp, FRAME, %sp
define({INPUT}, { [%sp+BIAS+ARG0+0*ARGSZ] })
define({OUTPUT}, { [%sp+BIAS+ARG0+1*ARGSZ] })
define({IVEC}, { [%sp+BIAS+ARG0+4*ARGSZ] })
call .PIC.me.up
mov .PIC.me.up-(.-4),out0
cmp in5, 0 ! enc
#ifdef OPENSSL_SYSNAME_ULTRASPARC
be,pn %icc, .ncbc.dec
#else
be .ncbc.dec
#endif
STPTR in4, IVEC
! addr left right temp label
load_little_endian(in4, in5, out5, local3, .LLE1) ! iv
addcc in2, -8, in2 ! bytes missing when first block done
#ifdef OPENSSL_SYSNAME_ULTRASPARC
bl,pn %icc, .ncbc.enc.seven.or.less
#else
bl .ncbc.enc.seven.or.less
#endif
mov in3, in4 ! schedule
.ncbc.enc.next.block:
load_little_endian(in0, out4, global4, local3, .LLE2) ! block
.ncbc.enc.next.block_1:
xor in5, out4, in5 ! iv xor
xor out5, global4, out5 ! iv xor
! parameter 8 1 for move in3 to in4, 2 for move in4 to in3
ip_macro(in5, out5, in5, out5, in3, 0, 0, 2)
.ncbc.enc.next.block_2:
!// call .des_enc ! compares in2 to 8
! rounds inlined for alignment purposes
add global1, 768, global4 ! address sbox 4 since register used below
rounds_macro(in5, out5, 1, .ncbc.enc.1, in3, in4) ! include encryption ks in3
#ifdef OPENSSL_SYSNAME_ULTRASPARC
bl,pn %icc, .ncbc.enc.next.block_fp
#else
bl .ncbc.enc.next.block_fp
#endif
add in0, 8, in0 ! input address
! If 8 or more bytes are to be encrypted after this block,
! we combine final permutation for this block with initial
! permutation for next block. Load next block:
load_little_endian(in0, global3, global4, local5, .LLE12)
! parameter 1 original left
! parameter 2 original right
! parameter 3 left ip
! parameter 4 right ip
! parameter 5 1: load ks1/ks2 to in3/in4, add 120 to in4
! 2: mov in4 to in3
!
! also adds -8 to length in2 and loads loop counter to out4
fp_ip_macro(out0, out1, global3, global4, 2)
store_little_endian(in1, out0, out1, local3, .SLE10) ! block
ld [in3], out0 ! key 7531 first round next block
mov in5, local1
xor global3, out5, in5 ! iv xor next block
ld [in3+4], out1 ! key 8642
add global1, 512, global3 ! address sbox 3 since register used
xor global4, local1, out5 ! iv xor next block
ba .ncbc.enc.next.block_2
add in1, 8, in1 ! output adress
.ncbc.enc.next.block_fp:
fp_macro(in5, out5)
store_little_endian(in1, in5, out5, local3, .SLE1) ! block
addcc in2, -8, in2 ! bytes missing when next block done
#ifdef OPENSSL_SYSNAME_ULTRASPARC
bpos,pt %icc, .ncbc.enc.next.block ! also jumps if 0
#else
bpos .ncbc.enc.next.block
#endif
add in1, 8, in1
.ncbc.enc.seven.or.less:
cmp in2, -8
#ifdef OPENSSL_SYSNAME_ULTRASPARC
ble,pt %icc, .ncbc.enc.finish
#else
ble .ncbc.enc.finish
#endif
nop
add in2, 8, local1 ! bytes to load
! addr, length, dest left, dest right, temp, temp2, label, ret label
load_n_bytes(in0, local1, global4, out4, local2, local3, .LNB1, .ncbc.enc.next.block_1)
! Loads 1 to 7 bytes little endian to global4, out4
.ncbc.enc.finish:
LDPTR IVEC, local4
store_little_endian(local4, in5, out5, local5, .SLE2) ! ivec
ret
restore
.ncbc.dec:
STPTR in0, INPUT
cmp in2, 0 ! length
add in3, 120, in3
LDPTR IVEC, local7 ! ivec
#ifdef OPENSSL_SYSNAME_ULTRASPARC
ble,pn %icc, .ncbc.dec.finish
#else
ble .ncbc.dec.finish
#endif
mov in3, in4 ! schedule
STPTR in1, OUTPUT
mov in0, local5 ! input
load_little_endian(local7, in0, in1, local3, .LLE3) ! ivec
.ncbc.dec.next.block:
load_little_endian(local5, in5, out5, local3, .LLE4) ! block
! parameter 6 1/2 for include encryption/decryption
! parameter 7 1 for mov in1 to in3
! parameter 8 1 for mov in3 to in4
ip_macro(in5, out5, out5, in5, in4, 2, 0, 1) ! include decryprion ks in4
fp_macro(out5, in5, 0, 1) ! 1 for input and output address to local5/7
! in2 is bytes left to be stored
! in2 is compared to 8 in the rounds
xor out5, in0, out4 ! iv xor
#ifdef OPENSSL_SYSNAME_ULTRASPARC
bl,pn %icc, .ncbc.dec.seven.or.less
#else
bl .ncbc.dec.seven.or.less
#endif
xor in5, in1, global4 ! iv xor
! Load ivec next block now, since input and output address might be the same.
load_little_endian_inc(local5, in0, in1, local3, .LLE5) ! iv
store_little_endian(local7, out4, global4, local3, .SLE3)
STPTR local5, INPUT
add local7, 8, local7
addcc in2, -8, in2
#ifdef OPENSSL_SYSNAME_ULTRASPARC
bg,pt %icc, .ncbc.dec.next.block
#else
bg .ncbc.dec.next.block
#endif
STPTR local7, OUTPUT
.ncbc.dec.store.iv:
LDPTR IVEC, local4 ! ivec
store_little_endian(local4, in0, in1, local5, .SLE4)
.ncbc.dec.finish:
ret
restore
.ncbc.dec.seven.or.less:
load_little_endian_inc(local5, in0, in1, local3, .LLE13) ! ivec
store_n_bytes(local7, in2, global4, out4, local3, local4, .SNB1, .ncbc.dec.store.iv)
.DES_ncbc_encrypt.end:
.size DES_ncbc_encrypt, .DES_ncbc_encrypt.end-DES_ncbc_encrypt
! void DES_ede3_cbc_encrypt(input, output, lenght, ks1, ks2, ks3, ivec, enc)
! **************************************************************************
.align 32
.global DES_ede3_cbc_encrypt
.type DES_ede3_cbc_encrypt,#function
DES_ede3_cbc_encrypt:
save %sp, FRAME, %sp
define({KS1}, { [%sp+BIAS+ARG0+3*ARGSZ] })
define({KS2}, { [%sp+BIAS+ARG0+4*ARGSZ] })
define({KS3}, { [%sp+BIAS+ARG0+5*ARGSZ] })
call .PIC.me.up
mov .PIC.me.up-(.-4),out0
LDPTR [%fp+BIAS+ARG0+7*ARGSZ], local3 ! enc
LDPTR [%fp+BIAS+ARG0+6*ARGSZ], local4 ! ivec
cmp local3, 0 ! enc
#ifdef OPENSSL_SYSNAME_ULTRASPARC
be,pn %icc, .ede3.dec
#else
be .ede3.dec
#endif
STPTR in4, KS2
STPTR in5, KS3
load_little_endian(local4, in5, out5, local3, .LLE6) ! ivec
addcc in2, -8, in2 ! bytes missing after next block
#ifdef OPENSSL_SYSNAME_ULTRASPARC
bl,pn %icc, .ede3.enc.seven.or.less
#else
bl .ede3.enc.seven.or.less
#endif
STPTR in3, KS1
.ede3.enc.next.block:
load_little_endian(in0, out4, global4, local3, .LLE7)
.ede3.enc.next.block_1:
LDPTR KS2, in4
xor in5, out4, in5 ! iv xor
xor out5, global4, out5 ! iv xor
LDPTR KS1, in3
add in4, 120, in4 ! for decryption we use last subkey first
nop
ip_macro(in5, out5, in5, out5, in3)
.ede3.enc.next.block_2:
call .des_enc ! ks1 in3
nop
call .des_dec ! ks2 in4
LDPTR KS3, in3
call .des_enc ! ks3 in3 compares in2 to 8
nop
#ifdef OPENSSL_SYSNAME_ULTRASPARC
bl,pn %icc, .ede3.enc.next.block_fp
#else
bl .ede3.enc.next.block_fp
#endif
add in0, 8, in0
! If 8 or more bytes are to be encrypted after this block,
! we combine final permutation for this block with initial
! permutation for next block. Load next block:
load_little_endian(in0, global3, global4, local5, .LLE11)
! parameter 1 original left
! parameter 2 original right
! parameter 3 left ip
! parameter 4 right ip
! parameter 5 1: load ks1/ks2 to in3/in4, add 120 to in4
! 2: mov in4 to in3
!
! also adds -8 to length in2 and loads loop counter to out4
fp_ip_macro(out0, out1, global3, global4, 1)
store_little_endian(in1, out0, out1, local3, .SLE9) ! block
mov in5, local1
xor global3, out5, in5 ! iv xor next block
ld [in3], out0 ! key 7531
add global1, 512, global3 ! address sbox 3
xor global4, local1, out5 ! iv xor next block
ld [in3+4], out1 ! key 8642
add global1, 768, global4 ! address sbox 4
ba .ede3.enc.next.block_2
add in1, 8, in1
.ede3.enc.next.block_fp:
fp_macro(in5, out5)
store_little_endian(in1, in5, out5, local3, .SLE5) ! block
addcc in2, -8, in2 ! bytes missing when next block done
#ifdef OPENSSL_SYSNAME_ULTRASPARC
bpos,pt %icc, .ede3.enc.next.block
#else
bpos .ede3.enc.next.block
#endif
add in1, 8, in1
.ede3.enc.seven.or.less:
cmp in2, -8
#ifdef OPENSSL_SYSNAME_ULTRASPARC
ble,pt %icc, .ede3.enc.finish
#else
ble .ede3.enc.finish
#endif
nop
add in2, 8, local1 ! bytes to load
! addr, length, dest left, dest right, temp, temp2, label, ret label
load_n_bytes(in0, local1, global4, out4, local2, local3, .LNB2, .ede3.enc.next.block_1)
.ede3.enc.finish:
LDPTR [%fp+BIAS+ARG0+6*ARGSZ], local4 ! ivec
store_little_endian(local4, in5, out5, local5, .SLE6) ! ivec
ret
restore
.ede3.dec:
STPTR in0, INPUT
add in5, 120, in5
STPTR in1, OUTPUT
mov in0, local5
add in3, 120, in3
STPTR in3, KS1
cmp in2, 0
#ifdef OPENSSL_SYSNAME_ULTRASPARC
ble %icc, .ede3.dec.finish
#else
ble .ede3.dec.finish
#endif
STPTR in5, KS3
LDPTR [%fp+BIAS+ARG0+6*ARGSZ], local7 ! iv
load_little_endian(local7, in0, in1, local3, .LLE8)
.ede3.dec.next.block:
load_little_endian(local5, in5, out5, local3, .LLE9)
! parameter 6 1/2 for include encryption/decryption
! parameter 7 1 for mov in1 to in3
! parameter 8 1 for mov in3 to in4
! parameter 9 1 for load ks3 and ks2 to in4 and in3
ip_macro(in5, out5, out5, in5, in4, 2, 0, 0, 1) ! inc .des_dec ks3 in4
call .des_enc ! ks2 in3
LDPTR KS1, in4
call .des_dec ! ks1 in4
nop
fp_macro(out5, in5, 0, 1) ! 1 for input and output address local5/7
! in2 is bytes left to be stored
! in2 is compared to 8 in the rounds
xor out5, in0, out4
#ifdef OPENSSL_SYSNAME_ULTRASPARC
bl,pn %icc, .ede3.dec.seven.or.less
#else
bl .ede3.dec.seven.or.less
#endif
xor in5, in1, global4
load_little_endian_inc(local5, in0, in1, local3, .LLE10) ! iv next block
store_little_endian(local7, out4, global4, local3, .SLE7) ! block
STPTR local5, INPUT
addcc in2, -8, in2
add local7, 8, local7
#ifdef OPENSSL_SYSNAME_ULTRASPARC
bg,pt %icc, .ede3.dec.next.block
#else
bg .ede3.dec.next.block
#endif
STPTR local7, OUTPUT
.ede3.dec.store.iv:
LDPTR [%fp+BIAS+ARG0+6*ARGSZ], local4 ! ivec
store_little_endian(local4, in0, in1, local5, .SLE8) ! ivec
.ede3.dec.finish:
ret
restore
.ede3.dec.seven.or.less:
load_little_endian_inc(local5, in0, in1, local3, .LLE14) ! iv
store_n_bytes(local7, in2, global4, out4, local3, local4, .SNB2, .ede3.dec.store.iv)
.DES_ede3_cbc_encrypt.end:
.size DES_ede3_cbc_encrypt,.DES_ede3_cbc_encrypt.end-DES_ede3_cbc_encrypt