ref: c23504631008ce0bfaa5bec48acb2b04f4b49fd9
dir: /sys/src/ape/lib/openssl/ssl/s2_pkt.c/
/* ssl/s2_pkt.c */
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
* All rights reserved.
*
* This package is an SSL implementation written
* by Eric Young (eay@cryptsoft.com).
* The implementation was written so as to conform with Netscapes SSL.
*
* This library is free for commercial and non-commercial use as long as
* the following conditions are aheared to. The following conditions
* apply to all code found in this distribution, be it the RC4, RSA,
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
* included with this distribution is covered by the same copyright terms
* except that the holder is Tim Hudson (tjh@cryptsoft.com).
*
* Copyright remains Eric Young's, and as such any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric Young should be given attribution
* as the author of the parts of the library used.
* This can be in the form of a textual message at program startup or
* in documentation (online or textual) provided with the package.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* "This product includes cryptographic software written by
* Eric Young (eay@cryptsoft.com)"
* The word 'cryptographic' can be left out if the rouines from the library
* being used are not cryptographic related :-).
* 4. If you include any Windows specific code (or a derivative thereof) from
* the apps directory (application code) you must include an acknowledgement:
* "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
*
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The licence and distribution terms for any publically available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.]
*/
/* ====================================================================
* Copyright (c) 1998-2001 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* openssl-core@openssl.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.openssl.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com).
*
*/
#include "ssl_locl.h"
#ifndef OPENSSL_NO_SSL2
#include <stdio.h>
#include <errno.h>
#define USE_SOCKETS
static int read_n(SSL *s,unsigned int n,unsigned int max,unsigned int extend);
static int do_ssl_write(SSL *s, const unsigned char *buf, unsigned int len);
static int write_pending(SSL *s, const unsigned char *buf, unsigned int len);
static int ssl_mt_error(int n);
/* SSL 2.0 imlementation for SSL_read/SSL_peek -
* This routine will return 0 to len bytes, decrypted etc if required.
*/
static int ssl2_read_internal(SSL *s, void *buf, int len, int peek)
{
int n;
unsigned char mac[MAX_MAC_SIZE];
unsigned char *p;
int i;
unsigned int mac_size;
ssl2_read_again:
if (SSL_in_init(s) && !s->in_handshake)
{
n=s->handshake_func(s);
if (n < 0) return(n);
if (n == 0)
{
SSLerr(SSL_F_SSL2_READ_INTERNAL,SSL_R_SSL_HANDSHAKE_FAILURE);
return(-1);
}
}
clear_sys_error();
s->rwstate=SSL_NOTHING;
if (len <= 0) return(len);
if (s->s2->ract_data_length != 0) /* read from buffer */
{
if (len > s->s2->ract_data_length)
n=s->s2->ract_data_length;
else
n=len;
memcpy(buf,s->s2->ract_data,(unsigned int)n);
if (!peek)
{
s->s2->ract_data_length-=n;
s->s2->ract_data+=n;
if (s->s2->ract_data_length == 0)
s->rstate=SSL_ST_READ_HEADER;
}
return(n);
}
/* s->s2->ract_data_length == 0
*
* Fill the buffer, then goto ssl2_read_again.
*/
if (s->rstate == SSL_ST_READ_HEADER)
{
if (s->first_packet)
{
n=read_n(s,5,SSL2_MAX_RECORD_LENGTH_2_BYTE_HEADER+2,0);
if (n <= 0) return(n); /* error or non-blocking */
s->first_packet=0;
p=s->packet;
if (!((p[0] & 0x80) && (
(p[2] == SSL2_MT_CLIENT_HELLO) ||
(p[2] == SSL2_MT_SERVER_HELLO))))
{
SSLerr(SSL_F_SSL2_READ_INTERNAL,SSL_R_NON_SSLV2_INITIAL_PACKET);
return(-1);
}
}
else
{
n=read_n(s,2,SSL2_MAX_RECORD_LENGTH_2_BYTE_HEADER+2,0);
if (n <= 0) return(n); /* error or non-blocking */
}
/* part read stuff */
s->rstate=SSL_ST_READ_BODY;
p=s->packet;
/* Do header */
/*s->s2->padding=0;*/
s->s2->escape=0;
s->s2->rlength=(((unsigned int)p[0])<<8)|((unsigned int)p[1]);
if ((p[0] & TWO_BYTE_BIT)) /* Two byte header? */
{
s->s2->three_byte_header=0;
s->s2->rlength&=TWO_BYTE_MASK;
}
else
{
s->s2->three_byte_header=1;
s->s2->rlength&=THREE_BYTE_MASK;
/* security >s2->escape */
s->s2->escape=((p[0] & SEC_ESC_BIT))?1:0;
}
}
if (s->rstate == SSL_ST_READ_BODY)
{
n=s->s2->rlength+2+s->s2->three_byte_header;
if (n > (int)s->packet_length)
{
n-=s->packet_length;
i=read_n(s,(unsigned int)n,(unsigned int)n,1);
if (i <= 0) return(i); /* ERROR */
}
p= &(s->packet[2]);
s->rstate=SSL_ST_READ_HEADER;
if (s->s2->three_byte_header)
s->s2->padding= *(p++);
else s->s2->padding=0;
/* Data portion */
if (s->s2->clear_text)
{
mac_size = 0;
s->s2->mac_data=p;
s->s2->ract_data=p;
if (s->s2->padding)
{
SSLerr(SSL_F_SSL2_READ_INTERNAL,SSL_R_ILLEGAL_PADDING);
return(-1);
}
}
else
{
mac_size=EVP_MD_size(s->read_hash);
OPENSSL_assert(mac_size <= MAX_MAC_SIZE);
s->s2->mac_data=p;
s->s2->ract_data= &p[mac_size];
if (s->s2->padding + mac_size > s->s2->rlength)
{
SSLerr(SSL_F_SSL2_READ_INTERNAL,SSL_R_ILLEGAL_PADDING);
return(-1);
}
}
s->s2->ract_data_length=s->s2->rlength;
/* added a check for length > max_size in case
* encryption was not turned on yet due to an error */
if ((!s->s2->clear_text) &&
(s->s2->rlength >= mac_size))
{
ssl2_enc(s,0);
s->s2->ract_data_length-=mac_size;
ssl2_mac(s,mac,0);
s->s2->ract_data_length-=s->s2->padding;
if ( (memcmp(mac,s->s2->mac_data,
(unsigned int)mac_size) != 0) ||
(s->s2->rlength%EVP_CIPHER_CTX_block_size(s->enc_read_ctx) != 0))
{
SSLerr(SSL_F_SSL2_READ_INTERNAL,SSL_R_BAD_MAC_DECODE);
return(-1);
}
}
INC32(s->s2->read_sequence); /* expect next number */
/* s->s2->ract_data is now available for processing */
/* Possibly the packet that we just read had 0 actual data bytes.
* (SSLeay/OpenSSL itself never sends such packets; see ssl2_write.)
* In this case, returning 0 would be interpreted by the caller
* as indicating EOF, so it's not a good idea. Instead, we just
* continue reading; thus ssl2_read_internal may have to process
* multiple packets before it can return.
*
* [Note that using select() for blocking sockets *never* guarantees
* that the next SSL_read will not block -- the available
* data may contain incomplete packets, and except for SSL 2,
* renegotiation can confuse things even more.] */
goto ssl2_read_again; /* This should really be
* "return ssl2_read(s,buf,len)",
* but that would allow for
* denial-of-service attacks if a
* C compiler is used that does not
* recognize end-recursion. */
}
else
{
SSLerr(SSL_F_SSL2_READ_INTERNAL,SSL_R_BAD_STATE);
return(-1);
}
}
int ssl2_read(SSL *s, void *buf, int len)
{
return ssl2_read_internal(s, buf, len, 0);
}
int ssl2_peek(SSL *s, void *buf, int len)
{
return ssl2_read_internal(s, buf, len, 1);
}
static int read_n(SSL *s, unsigned int n, unsigned int max,
unsigned int extend)
{
int i,off,newb;
/* if there is stuff still in the buffer from a previous read,
* and there is more than we want, take some. */
if (s->s2->rbuf_left >= (int)n)
{
if (extend)
s->packet_length+=n;
else
{
s->packet= &(s->s2->rbuf[s->s2->rbuf_offs]);
s->packet_length=n;
}
s->s2->rbuf_left-=n;
s->s2->rbuf_offs+=n;
return(n);
}
if (!s->read_ahead) max=n;
if (max > (unsigned int)(SSL2_MAX_RECORD_LENGTH_2_BYTE_HEADER+2))
max=SSL2_MAX_RECORD_LENGTH_2_BYTE_HEADER+2;
/* Else we want more than we have.
* First, if there is some left or we want to extend */
off=0;
if ((s->s2->rbuf_left != 0) || ((s->packet_length != 0) && extend))
{
newb=s->s2->rbuf_left;
if (extend)
{
off=s->packet_length;
if (s->packet != s->s2->rbuf)
memcpy(s->s2->rbuf,s->packet,
(unsigned int)newb+off);
}
else if (s->s2->rbuf_offs != 0)
{
memcpy(s->s2->rbuf,&(s->s2->rbuf[s->s2->rbuf_offs]),
(unsigned int)newb);
s->s2->rbuf_offs=0;
}
s->s2->rbuf_left=0;
}
else
newb=0;
/* off is the offset to start writing too.
* r->s2->rbuf_offs is the 'unread data', now 0.
* newb is the number of new bytes so far
*/
s->packet=s->s2->rbuf;
while (newb < (int)n)
{
clear_sys_error();
if (s->rbio != NULL)
{
s->rwstate=SSL_READING;
i=BIO_read(s->rbio,(char *)&(s->s2->rbuf[off+newb]),
max-newb);
}
else
{
SSLerr(SSL_F_READ_N,SSL_R_READ_BIO_NOT_SET);
i= -1;
}
#ifdef PKT_DEBUG
if (s->debug & 0x01) sleep(1);
#endif
if (i <= 0)
{
s->s2->rbuf_left+=newb;
return(i);
}
newb+=i;
}
/* record unread data */
if (newb > (int)n)
{
s->s2->rbuf_offs=n+off;
s->s2->rbuf_left=newb-n;
}
else
{
s->s2->rbuf_offs=0;
s->s2->rbuf_left=0;
}
if (extend)
s->packet_length+=n;
else
s->packet_length=n;
s->rwstate=SSL_NOTHING;
return(n);
}
int ssl2_write(SSL *s, const void *_buf, int len)
{
const unsigned char *buf=_buf;
unsigned int n,tot;
int i;
if (SSL_in_init(s) && !s->in_handshake)
{
i=s->handshake_func(s);
if (i < 0) return(i);
if (i == 0)
{
SSLerr(SSL_F_SSL2_WRITE,SSL_R_SSL_HANDSHAKE_FAILURE);
return(-1);
}
}
if (s->error)
{
ssl2_write_error(s);
if (s->error)
return(-1);
}
clear_sys_error();
s->rwstate=SSL_NOTHING;
if (len <= 0) return(len);
tot=s->s2->wnum;
s->s2->wnum=0;
n=(len-tot);
for (;;)
{
i=do_ssl_write(s,&(buf[tot]),n);
if (i <= 0)
{
s->s2->wnum=tot;
return(i);
}
if ((i == (int)n) ||
(s->mode & SSL_MODE_ENABLE_PARTIAL_WRITE))
{
return(tot+i);
}
n-=i;
tot+=i;
}
}
static int write_pending(SSL *s, const unsigned char *buf, unsigned int len)
{
int i;
/* s->s2->wpend_len != 0 MUST be true. */
/* check that they have given us the same buffer to
* write */
if ((s->s2->wpend_tot > (int)len) ||
((s->s2->wpend_buf != buf) &&
!(s->mode & SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER)))
{
SSLerr(SSL_F_WRITE_PENDING,SSL_R_BAD_WRITE_RETRY);
return(-1);
}
for (;;)
{
clear_sys_error();
if (s->wbio != NULL)
{
s->rwstate=SSL_WRITING;
i=BIO_write(s->wbio,
(char *)&(s->s2->write_ptr[s->s2->wpend_off]),
(unsigned int)s->s2->wpend_len);
}
else
{
SSLerr(SSL_F_WRITE_PENDING,SSL_R_WRITE_BIO_NOT_SET);
i= -1;
}
#ifdef PKT_DEBUG
if (s->debug & 0x01) sleep(1);
#endif
if (i == s->s2->wpend_len)
{
s->s2->wpend_len=0;
s->rwstate=SSL_NOTHING;
return(s->s2->wpend_ret);
}
else if (i <= 0)
return(i);
s->s2->wpend_off+=i;
s->s2->wpend_len-=i;
}
}
static int do_ssl_write(SSL *s, const unsigned char *buf, unsigned int len)
{
unsigned int j,k,olen,p,mac_size,bs;
register unsigned char *pp;
olen=len;
/* first check if there is data from an encryption waiting to
* be sent - it must be sent because the other end is waiting.
* This will happen with non-blocking IO. We print it and then
* return.
*/
if (s->s2->wpend_len != 0) return(write_pending(s,buf,len));
/* set mac_size to mac size */
if (s->s2->clear_text)
mac_size=0;
else
mac_size=EVP_MD_size(s->write_hash);
/* lets set the pad p */
if (s->s2->clear_text)
{
if (len > SSL2_MAX_RECORD_LENGTH_2_BYTE_HEADER)
len=SSL2_MAX_RECORD_LENGTH_2_BYTE_HEADER;
p=0;
s->s2->three_byte_header=0;
/* len=len; */
}
else
{
bs=EVP_CIPHER_CTX_block_size(s->enc_read_ctx);
j=len+mac_size;
/* Two-byte headers allow for a larger record length than
* three-byte headers, but we can't use them if we need
* padding or if we have to set the escape bit. */
if ((j > SSL2_MAX_RECORD_LENGTH_3_BYTE_HEADER) &&
(!s->s2->escape))
{
if (j > SSL2_MAX_RECORD_LENGTH_2_BYTE_HEADER)
j=SSL2_MAX_RECORD_LENGTH_2_BYTE_HEADER;
/* set k to the max number of bytes with 2
* byte header */
k=j-(j%bs);
/* how many data bytes? */
len=k-mac_size;
s->s2->three_byte_header=0;
p=0;
}
else if ((bs <= 1) && (!s->s2->escape))
{
/* j <= SSL2_MAX_RECORD_LENGTH_3_BYTE_HEADER, thus
* j < SSL2_MAX_RECORD_LENGTH_2_BYTE_HEADER */
s->s2->three_byte_header=0;
p=0;
}
else /* we may have to use a 3 byte header */
{
/* If s->s2->escape is not set, then
* j <= SSL2_MAX_RECORD_LENGTH_3_BYTE_HEADER, and thus
* j < SSL2_MAX_RECORD_LENGTH_2_BYTE_HEADER. */
p=(j%bs);
p=(p == 0)?0:(bs-p);
if (s->s2->escape)
{
s->s2->three_byte_header=1;
if (j > SSL2_MAX_RECORD_LENGTH_3_BYTE_HEADER)
j=SSL2_MAX_RECORD_LENGTH_3_BYTE_HEADER;
}
else
s->s2->three_byte_header=(p == 0)?0:1;
}
}
/* Now
* j <= SSL2_MAX_RECORD_LENGTH_2_BYTE_HEADER
* holds, and if s->s2->three_byte_header is set, then even
* j <= SSL2_MAX_RECORD_LENGTH_3_BYTE_HEADER.
*/
/* mac_size is the number of MAC bytes
* len is the number of data bytes we are going to send
* p is the number of padding bytes
* (if it is a two-byte header, then p == 0) */
s->s2->wlength=len;
s->s2->padding=p;
s->s2->mac_data= &(s->s2->wbuf[3]);
s->s2->wact_data= &(s->s2->wbuf[3+mac_size]);
/* we copy the data into s->s2->wbuf */
memcpy(s->s2->wact_data,buf,len);
if (p)
memset(&(s->s2->wact_data[len]),0,p); /* arbitrary padding */
if (!s->s2->clear_text)
{
s->s2->wact_data_length=len+p;
ssl2_mac(s,s->s2->mac_data,1);
s->s2->wlength+=p+mac_size;
ssl2_enc(s,1);
}
/* package up the header */
s->s2->wpend_len=s->s2->wlength;
if (s->s2->three_byte_header) /* 3 byte header */
{
pp=s->s2->mac_data;
pp-=3;
pp[0]=(s->s2->wlength>>8)&(THREE_BYTE_MASK>>8);
if (s->s2->escape) pp[0]|=SEC_ESC_BIT;
pp[1]=s->s2->wlength&0xff;
pp[2]=s->s2->padding;
s->s2->wpend_len+=3;
}
else
{
pp=s->s2->mac_data;
pp-=2;
pp[0]=((s->s2->wlength>>8)&(TWO_BYTE_MASK>>8))|TWO_BYTE_BIT;
pp[1]=s->s2->wlength&0xff;
s->s2->wpend_len+=2;
}
s->s2->write_ptr=pp;
INC32(s->s2->write_sequence); /* expect next number */
/* lets try to actually write the data */
s->s2->wpend_tot=olen;
s->s2->wpend_buf=buf;
s->s2->wpend_ret=len;
s->s2->wpend_off=0;
return(write_pending(s,buf,olen));
}
int ssl2_part_read(SSL *s, unsigned long f, int i)
{
unsigned char *p;
int j;
if (i < 0)
{
/* ssl2_return_error(s); */
/* for non-blocking io,
* this is not necessarily fatal */
return(i);
}
else
{
s->init_num+=i;
/* Check for error. While there are recoverable errors,
* this function is not called when those must be expected;
* any error detected here is fatal. */
if (s->init_num >= 3)
{
p=(unsigned char *)s->init_buf->data;
if (p[0] == SSL2_MT_ERROR)
{
j=(p[1]<<8)|p[2];
SSLerr((int)f,ssl_mt_error(j));
s->init_num -= 3;
if (s->init_num > 0)
memmove(p, p+3, s->init_num);
}
}
/* If it's not an error message, we have some error anyway --
* the message was shorter than expected. This too is treated
* as fatal (at least if SSL_get_error is asked for its opinion). */
return(0);
}
}
int ssl2_do_write(SSL *s)
{
int ret;
ret=ssl2_write(s,&s->init_buf->data[s->init_off],s->init_num);
if (ret == s->init_num)
{
if (s->msg_callback)
s->msg_callback(1, s->version, 0, s->init_buf->data, (size_t)(s->init_off + s->init_num), s, s->msg_callback_arg);
return(1);
}
if (ret < 0)
return(-1);
s->init_off+=ret;
s->init_num-=ret;
return(0);
}
static int ssl_mt_error(int n)
{
int ret;
switch (n)
{
case SSL2_PE_NO_CIPHER:
ret=SSL_R_PEER_ERROR_NO_CIPHER;
break;
case SSL2_PE_NO_CERTIFICATE:
ret=SSL_R_PEER_ERROR_NO_CERTIFICATE;
break;
case SSL2_PE_BAD_CERTIFICATE:
ret=SSL_R_PEER_ERROR_CERTIFICATE;
break;
case SSL2_PE_UNSUPPORTED_CERTIFICATE_TYPE:
ret=SSL_R_PEER_ERROR_UNSUPPORTED_CERTIFICATE_TYPE;
break;
default:
ret=SSL_R_UNKNOWN_REMOTE_ERROR_TYPE;
break;
}
return(ret);
}
#else /* !OPENSSL_NO_SSL2 */
# if PEDANTIC
static void *dummy=&dummy;
# endif
#endif