ref: d1dc287210afd73705c21675dcbaa4eaf997fdde
dir: /sys/src/cmd/gs/doc/Ps-style.htm/
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<title>Ghostscript PostScript coding guidelines</title>
<!-- $Id: Ps-style.htm,v 1.37 2005/10/20 19:46:23 ray Exp $ -->
<link rel="stylesheet" type="text/css" href="gs.css" title="Ghostscript Style">
</head>
<body>
<!-- [1.0 begin visible header] ============================================ -->
<!-- [1.1 begin headline] ================================================== -->
<h1>Ghostscript PostScript coding guidelines</h1>
<!-- [1.1 end headline] ==================================================== -->
<!-- [1.2 begin table of contents] ========================================= -->
<h2>Table of contents</h2>
<blockquote><ul>
<li><a href="#Summary">Summary of the coding guidelines</a>
<li><a href="#Introduction">Introduction</a>
<li><a href="#PS_features">Use of PostScript language features</a>
<ul>
<li><a href="#Restrictions">Restrictions</a>
<li><a href="#Protection">Protection</a>
<li><a href="#Standard_constructions">Standard constructions</a>
</ul>
<li><a href="#File_structuring">File structuring</a>
<li><a href="#Commenting">Commenting</a>
<li><a href="#Formatting">Formatting</a>
<ul>
<li><a href="#Indentation">Indentation</a>
<li><a href="#Spaces">Spaces</a>
</ul>
<li><a href="#Naming">Naming</a>
<li><a href="#Miscellany">Miscellany</a>
<ul>
<li><a href="#Non_standard_operators">Some useful non-standard operators</a>
<li><a href="#Useful_procedures">Some useful procedures</a>
<li><a href="#Other">Other</a>
</ul>
</ul></blockquote>
<!-- [1.2 end table of contents] =========================================== -->
<!-- [1.3 begin hint] ====================================================== -->
<p>
For other information, see the <a href="Readme.htm">Ghostscript
overview</a>.
<!-- [1.3 end hint] ======================================================== -->
<hr>
<!-- [1.0 end visible header] ============================================== -->
<!-- [2.0 begin contents] ================================================== -->
<h2><a name="Summary"></a>Summary of the coding guidelines</h2>
<ul>
<li>Don't store into literals.
<li>Use <b><tt>loop</tt></b> to create a block with multiple exits.
<li>Use a dictionary or an array for multi-way switches.
<li>Start every file with a copyright notice, the file name, and a one-line
summary.
<li>Comment every procedure with the arguments and result, and with the
function of the procedure unless it's obvious.
<li>Comment the stack contents ad lib, and particularly at the beginning of
every loop body.
<li>Indent every 2 spaces.
<li>Always put { at the end of a line, and } at the beginning of a line,
unless the contents are very short.
<li>Always put spaces between adjacent tokens.
<li>Use only lower-case letters and digits for names, or Vienna style names,
except for an initial "." for names only used within a single file.
<li>Don't allocate objects in heavily used code.
<li>Consider factoring out code into a procedure if it is used more than
once.
</ul>
<hr>
<h2><a name="Introduction"></a>Introduction</h2>
<p>
The many rules that Ghostscript's code follows almost everywhere are meant
to produce code that is easy to read. It's important to observe them as
much as possible in order to maintain a consistent style, but if you find a
rule getting in your way or producing ugly-looking results once in a while,
it's OK to break it.
<hr>
<h2><a name="PS_features"></a>Use of PostScript language features</h2>
<h3><a name="Restrictions"></a>Restrictions</h3>
<p>
If you need to store a value temporarily, don't write into a literal in the
code, as in this fragment to show a character given the character code:
<blockquote><pre>
( ) dup 0 4 -1 roll put show
</pre></blockquote>
<p>
Instead, allocate storage for it:
<blockquote><pre>
1 string dup 0 4 -1 roll put show
</pre></blockquote>
<h3><a name="Protection"></a>Protection</h3>
<p>
If an object is never supposed to change, use <b><tt>readonly</tt></b> to
make it read-only. This applies especially to permanently allocated objects
such as constant strings or dictionaries.
<p>
During initialization, and occasionally afterwards, it may be necessary to
store into a read-only dictionary, or to store a pointer to a dictionary in
local VM into a dictionary in global VM. The operators
<b><tt>.forceput</tt></b> and <b><tt>.forceundef</tt></b> are available for
this purpose. To make these operators inaccessible to ordinary programs,
they are removed from <b><tt>systemdict</tt></b> at the end of
initialization: system code that uses them should always use
<b><tt>bind</tt></b> and <b><tt>odef</tt></b> (or
<b><tt>executeonly</tt></b>) to make uses of them inaccessible as well.
<h3><a name="Standard_constructions"></a>Standard constructions</h3>
<h4>Multi-way conditionals</h4>
<p>
If you write a block of code with more than about 3 exit points, the usual
way to do it would be like this:
<blockquote><pre>
{
... {
...1
} {
... {
...2
} {
... {
...3
} {
...4
} ifelse
} ifelse
} ifelse
}
</pre></blockquote>
<p>
However, this causes the 4 logically somewhat parallel code blocks to be
indented differently, and as the indentation increases, it becomes harder to
see the structure visually. As an alternative, you can do it this way:
<blockquote><pre>
{ % The loop doesn't actually loop: it just provides a common exit.
... {
...1
exit
} if
... {
...2
exit
} if
... {
...3
exit
} if
...4
exit
} loop
</pre></blockquote>
<p>
Don't forget the final exit, to prevent the loop from actually looping.
<h4>Switches</h4>
<p>
Use a dictionary or an array of procedures to implement a 'switch', rather
than a series of conditionals, if there are more than about 3 cases. For
example, rather than:
<blockquote><pre>
dup /a eq {
pop ...a
} {
dup /b eq {
pop ...b
} {
dup /c eq {
pop ...c
} {
...x
} ifelse
} ifelse
} ifelse
</pre></blockquote>
<p>
(or using the loop/exit construct suggested above), consider:
<blockquote><pre>
/xyzdict mark
/a {...a} bind
/b {...b} bind
/c {...c} bind
.dicttomark readonly def
...
//xyzdict 1 index .knownget {
exch pop exec
} {
...x
} ifelse
</pre></blockquote>
<hr>
<h2><a name="File_structuring"></a>File structuring</h2>
<p>
Every code file should start with comments containing
<ol>
<li>a copyright notice;
<li>the name of the file in the form of an RCS Id:
<blockquote><pre>
% Id$: filename.ps $
</pre></blockquote>
<li>a very brief summary (preferably only one line) of what the file
contains.
</ol>
<p>
If you create a file by copying the beginning of another file, be sure to
update the copyright year and change the file name.
<hr>
<h2><a name="Commenting"></a>Commenting</h2>
<p>
If a file has well-defined functional sections, put a comment at the
beginning of each section to describe its purpose or function.
<p>
Put a comment before every procedure to describe what the procedure does,
unless it's obvious or the procedure's function is defined by the PLRM. In
case of doubt, don't assume it's obvious. If the procedure may execute a
deliberate 'stop' or 'exit' not enclosed in 'stopped' or a loop
respectively, that should be mentioned. However, information about the
arguments and results should go in the argument and result comment
(described just below) if possible, not the functional comment.
<p>
Put a comment on every procedure to describe the arguments and results:
<blockquote><pre>
/hypot { % <num1> <num2> hypot <real>
dup mul exch dup mul add sqrt
} def
</pre></blockquote>
<p>
There is another commenting style that some people prefer to the above:
<blockquote><pre>
/hypot { % num1 num2 --> realnum
dup mul exch dup mul add sqrt
} def
</pre></blockquote>
<p>
We have adopted the first style for consistency with Adobe's documentation,
but we recognize that there are technical arguments for and against both
styles, and might consider switching some time in the future. If you have
strong feelings either way, please make your opinion known to
<b><tt>gs-devel@ghostscript.com</tt></b>.
<p>
Put comments describing the stack contents wherever you think they will be
helpful; put such a comment at the beginning of every loop body unless you
have a good reason not to.
<p>
When you change a piece of code, do <em>not</em> include a comment with your
name or initials. Also, do <em>not</em> retain the old code in a comment,
unless you consider it essential to explain something about the new code; in
that case, retain as little as possible. (CVS logs do both of these things
better than manual editing.) However, if you make major changes in a
procedure or a file, you may put your initials, the date, and a brief
comment at the head of the procedure or file respectively.
<hr>
<h2><a name="Formatting"></a>Formatting</h2>
<h3><a name="Indentation"></a>Indentation</h3>
<p>
Indent 2 spaces per indentation level. You may use tabs at the left margin
for indentation, with 1 tab = 8 spaces, but you should not use tabs anywhere
else, except to place comments.
<p>
Indent { } constructs like this:
<blockquote><pre>
... {
...
} {
...
} ...
</pre></blockquote>
<p>
If the body of a conditional or loop is no more than about 20 characters,
you can put the entire construct on a single line if you want:
<blockquote><pre>
... { ... } if
</pre></blockquote>
rather than
<blockquote><pre>
... {
...
} if
</pre></blockquote>
<p>
There is another indentation style that many people prefer to the above:
<blockquote><pre>
...
{ ...
}
{ ...
} ...
</pre></blockquote>
<p>
We have adopted the first style for consistency with our C code, but we
recognize that there are technical arguments for and against both styles,
and might consider switching some time in the future. If you have strong
feelings either way, please make your opinion known to
<b><tt>gs-devel@ghostscript.com</tt></b>.
<h3><a name="Spaces"></a>Spaces</h3>
<p>
Always put spaces between two adjacent tokens, even if this isn't strictly
required. E.g.,
<blockquote><pre>
/Halftone /Category findresource
</pre></blockquote>
<p>
not
<blockquote><pre>
/Halftone/Category findresource
</pre></blockquote>
<hr>
<h2><a name="Naming"></a>Naming</h2>
<p>
All names should consist only of letters and digits, possibly with an
initial ".", except for names drawn from the PostScript or PDF reference
manual, which must be capitalized as in the manual. In general, an initial
"." should be used for those and only those names that are not defined in a
private dictionary but that are meant to be used only in the file where they
are defined.
<p>
For edits to existing code, names made up of multiple words should not use
any punctuation, or capitalization, to separate the words, again except for
names that must match a specification. For new code, you may use this
convention, or you may use the "Vienna" convention of capitalizing the first
letter of words, e.g., <b><tt>readSubrs</tt></b> rather than
<b><tt>readsubrs</tt></b>. If you use the Vienna convention, function names
should start with an upper case letter, variable names with a lower case
letter. Using the first letter of a variable name to indicate the
variable's type is optional, but if you do it, you should follow existing
codified usage (****** WE NEED A REFERENCE FOR THIS ******).
<hr>
<h2><a name="Miscellany"></a>Miscellany</h2>
<h3><a name="Non_standard_operators"></a>Some useful non-standard
operators</h3>
<dl>
<dt><b><tt><obj1> <obj2> ... <objn> <n> .execn ...</tt></b>
<dd>This executes <b><tt>obj1</tt></b> through <b><tt>objn</tt></b> in that
order, essentially equivalent to
<blockquote><pre>
<obj1> <obj2> ... <objn> <n> array astore {exec} forall
</pre></blockquote>
<p>
except that it doesn't actually create the array.
<dt><b><tt><dict> <key> <b>.knownget</b> <value> true</tt></b>
<dt><b><tt><dict> <key> <b>.knownget</b> false</tt></b>
<dd>This combines <b><tt>known</tt></b> and <b><tt>get</tt></b> in the
obvious way.
<dt><b><tt><name> <proc> odef -</tt></b>
<dd>This defines <b><tt>name</tt></b> as a "pseudo-operator". The value of
<b><tt>name</tt></b> will be executable, will have type
<b><tt>operatortype</tt></b>, and will be executed if it appears directly in
the body of a procedure (like an operator, unlike a procedure), but what
will actually be executed will be <b><tt>proc</tt></b>. In addition, if the
execution of <b><tt>proc</tt></b> is ended prematurely (by
<b><tt>stop</tt></b>, including the <b><tt>stop</tt></b> that is normally
executed when an error occurs, or <b><tt>exit</tt></b>) and the operand and
dictionary stacks are at least as deep as they were when the "operator" was
invoked, the stacks will be cut back to their original depths before the
error is processed. Thus, if pseudo-operator procedures are careful not to
remove any of their operands until they reach a point in execution beyond
which they cannot possibly cause an error, they will behave just like
operators in that the stacks will appear to be unchanged if an error occurs.
</dl>
<h3><a name="Useful_procedures"></a>Some useful procedures</h3>
<dl>
<dt><b><tt><object> <errorname> signalerror -</tt></b>
<dd>Signal an error with the given name and the given "current object".
This does exactly what the interpreter does when an error occurs.
</dl>
<h3><a name="Other"></a>Other</h3>
<p>
If you can avoid it, don't allocate objects (strings, arrays, dictionaries,
gstates, etc.) in commonly used operators or procedures: these will need to
be garbage collected later, slowing down execution. Instead, keep values on
the stack, if you can. The <b><tt>.execn</tt></b> operator discussed above
may be helpful in doing this.
<p>
If you find yourself writing the same stretch of code (more than about half
a dozen tokens) more than once, ask yourself whether it performs a function
that could be made into a procedure.
<!-- [2.0 end contents] ==================================================== -->
<!-- [3.0 begin visible trailer] =========================================== -->
<hr>
<p>
<small>Copyright © 2000 Aladdin Enterprises. All rights
reserved.</small>
<p>
<small>This file is part of AFPL Ghostscript. See the <a
href="Public.htm">Aladdin Free Public License</a> (the "License") for full
details of the terms of using, copying, modifying, and redistributing AFPL
Ghostscript.</small>
<p>
<small>Ghostscript version 8.53, 20 October 2005
<!-- [3.0 end visible trailer] ============================================= -->
</body>
</html>