ref: e3ad3d6968f4fd4cbb325e081ac9027d24f01316
dir: /sys/src/9/pc/etherwavelan.c/
/* Pci/pcmcia code for wavelan.c */ #include "u.h" #include "../port/lib.h" #include "mem.h" #include "dat.h" #include "fns.h" #include "io.h" #include "../port/pci.h" #include "../port/error.h" #include "../port/netif.h" #include "../port/etherif.h" #include "wavelan.h" static int wavelanpcmciareset(Ether *ether) { int i; char *p; Ctlr *ctlr; if((ctlr = malloc(sizeof(Ctlr))) == nil) return -1; ilock(ctlr); ctlr->ctlrno = ether->ctlrno; if (ether->port==0) ether->port=WDfltIOB; ctlr->iob = ether->port; if (ether->irq==0) ether->irq=WDfltIRQ; if (ioalloc(ether->port,WIOLen,0,"wavelan")<0){ // print("#l%d: port 0x%lx in use\n", // ether->ctlrno, ether->port); goto abort1; } /* * If id= is specified, card must match. Otherwise try generic. */ ctlr->slot = -1; for(i=0; i<ether->nopt; i++){ if(cistrncmp(ether->opt[i], "id=", 3) == 0){ if((ctlr->slot = pcmspecial(ðer->opt[i][3], ether)) < 0) goto abort; break; } } if(ctlr->slot == -1){ for (i=0; wavenames[i]; i++) if((ctlr->slot = pcmspecial(wavenames[i], ether))>=0) break; if(!wavenames[i]){ DEBUG("no wavelan found\n"); goto abort; } } // DEBUG("#l%d: port=0x%lx irq=%ld\n", // ether->ctlrno, ether->port, ether->irq); if(wavelanreset(ether, ctlr) < 0){ abort: iofree(ether->port); abort1: iunlock(ctlr); free(ctlr); ether->ctlr = nil; return -1; } for(i = 0; i < ether->nopt; i++){ if(p = strchr(ether->opt[i], '=')) *p = ' '; w_option(ctlr, ether->opt[i], strlen(ether->opt[i])); } iunlock(ctlr); return 0; } static struct { int vid; int did; } wavelanpci[] = { 0x1260, 0x3873, /* Intersil Prism2.5 */ 0x1737, 0x0019, /* Linksys WPC-11 untested */ }; static Ctlr *ctlrhead, *ctlrtail; static void wavelanpciscan(void) { int i; void *mem; Pcidev *p; Ctlr *ctlr; p = nil; while(p = pcimatch(p, 0, 0)){ for(i=0; i<nelem(wavelanpci); i++) if(p->vid == wavelanpci[i].vid && p->did == wavelanpci[i].did) break; if(i==nelem(wavelanpci)) continue; /* * On the Prism, bar[0] is the memory-mapped register address (4KB), */ if((p->mem[0].bar & 1) != 0 || p->mem[0].size != 4096){ print("wavelanpci: %.4ux %.4ux: unlikely mmio bar %llux size %lld\n", p->vid, p->did, p->mem[0].bar, p->mem[0].size); continue; } ctlr = malloc(sizeof(Ctlr)); if(ctlr == nil){ print("wavelanpci: can't allocate memory\n"); continue; } ctlr->pcidev = p; mem = vmap(p->mem[0].bar&~0xF, p->mem[0].size); if(mem == nil){ print("wavelanpci: %.4ux %.4ux: vmap %llux %lld failed\n", p->vid, p->did, p->mem[0].bar&~0xF, p->mem[0].size); free(ctlr); continue; } ctlr->mmb = mem; if(ctlrhead != nil) ctlrtail->next = ctlr; else ctlrhead = ctlr; ctlrtail = ctlr; } } static int wavelanpcireset(Ether *ether) { int i; char *p; Ctlr *ctlr; if(ctlrhead == nil) wavelanpciscan(); /* * Allow plan9.ini to set vid, did? */ for(ctlr=ctlrhead; ctlr!=nil; ctlr=ctlr->next) if(ctlr->active == 0) break; if(ctlr == nil) return -1; ctlr->active = 1; ilock(ctlr); pcienable(ctlr->pcidev); ether->irq = ctlr->pcidev->intl; ether->tbdf = ctlr->pcidev->tbdf; /* * Really hard reset. */ csr_outs(ctlr, WR_PciCor, 0x0080); delay(250); csr_outs(ctlr, WR_PciCor, 0x0000); delay(500); for(i=0; i<2*10; i++){ if(!(csr_ins(ctlr, WR_Cmd)&WCmdBusy)) break; delay(100); } if(i >= 2*10) print("wavelan pci %.4ux %.4ux: reset timeout %.4ux\n", ctlr->pcidev->vid, ctlr->pcidev->did, csr_ins(ctlr, WR_Cmd)); if(wavelanreset(ether, ctlr) < 0){ iunlock(ctlr); ether->ctlr = nil; return -1; } for(i = 0; i < ether->nopt; i++){ if(p = strchr(ether->opt[i], '=')) *p = ' '; w_option(ctlr, ether->opt[i], strlen(ether->opt[i])); } pcisetbme(ctlr->pcidev); iunlock(ctlr); return 0; } void etherwavelanlink(void) { addethercard("wavelan", wavelanpcmciareset); addethercard("wavelanpci", wavelanpcireset); }