ref: e87ca8d97689ad9a63c0b56d0bfbda00c56abca2
dir: /sys/src/9/bcm/vfp3.c/
/*
* VFPv2 or VFPv3 floating point unit
*/
#include "u.h"
#include "../port/lib.h"
#include "mem.h"
#include "dat.h"
#include "fns.h"
#include "ureg.h"
#include "arm.h"
/* subarchitecture code in m->havefp */
enum {
VFPv2 = 2,
VFPv3 = 3,
};
/* fp control regs. most are read-only */
enum {
Fpsid = 0,
Fpscr = 1, /* rw */
Mvfr1 = 6,
Mvfr0 = 7,
Fpexc = 8, /* rw */
Fpinst= 9, /* optional, for exceptions */
Fpinst2=10,
};
enum {
/* Fpexc bits */
Fpex = 1u << 31,
Fpenabled = 1 << 30,
Fpdex = 1 << 29, /* defined synch exception */
// Fp2v = 1 << 28, /* Fpinst2 reg is valid */
// Fpvv = 1 << 27, /* if Fpdex, vecitr is valid */
// Fptfv = 1 << 26, /* trapped fault is valid */
// Fpvecitr = MASK(3) << 8,
/* FSR bits appear here */
Fpmbc = Fpdex, /* bits exception handler must clear */
/* Fpscr bits; see u.h for more */
Stride = MASK(2) << 20,
Len = MASK(3) << 16,
Dn= 1 << 25,
Fz= 1 << 24,
/* trap exception enables (not allowed in vfp3) */
FPIDNRM = 1 << 15, /* input denormal */
Alltraps = FPIDNRM | FPINEX | FPUNFL | FPOVFL | FPZDIV | FPINVAL,
/* pending exceptions */
FPAIDNRM = 1 << 7, /* input denormal */
Allexc = FPAIDNRM | FPAINEX | FPAUNFL | FPAOVFL | FPAZDIV | FPAINVAL,
/* condition codes */
Allcc = MASK(4) << 28,
};
enum {
/* CpCPaccess bits */
Cpaccnosimd = 1u << 31,
Cpaccd16 = 1 << 30,
};
static char *
subarch(int impl, uint sa)
{
static char *armarchs[] = {
"VFPv1 (unsupported)",
"VFPv2",
"VFPv3+ with common VFP subarch v2",
"VFPv3+ with null subarch",
"VFPv3+ with common VFP subarch v3",
};
if (impl != 'A' || sa >= nelem(armarchs))
return "GOK";
else
return armarchs[sa];
}
static char *
implement(uchar impl)
{
if (impl == 'A')
return "arm";
else
return "unknown";
}
static int
havefp(void)
{
int gotfp;
ulong acc, sid;
if (m->havefpvalid)
return m->havefp;
m->havefp = 0;
gotfp = 1 << CpFP | 1 << CpDFP;
cpwrsc(0, CpCONTROL, 0, CpCPaccess, MASK(28));
acc = cprdsc(0, CpCONTROL, 0, CpCPaccess);
if ((acc & (MASK(2) << (2*CpFP))) == 0) {
gotfp &= ~(1 << CpFP);
print("fpon: no single FP coprocessor\n");
}
if ((acc & (MASK(2) << (2*CpDFP))) == 0) {
gotfp &= ~(1 << CpDFP);
print("fpon: no double FP coprocessor\n");
}
if (!gotfp) {
print("fpon: no FP coprocessors\n");
m->havefpvalid = 1;
return 0;
}
m->fpon = 1; /* don't panic */
sid = fprd(Fpsid);
m->fpon = 0;
switch((sid >> 16) & MASK(7)){
case 0: /* VFPv1 */
break;
case 1: /* VFPv2 */
m->havefp = VFPv2;
m->fpnregs = 16;
break;
default: /* VFPv3 or later */
m->havefp = VFPv3;
m->fpnregs = (acc & Cpaccd16) ? 16 : 32;
break;
}
if (m->machno == 0)
print("fp: %d registers, %s simd\n", m->fpnregs,
(acc & Cpaccnosimd? " no": ""));
m->havefpvalid = 1;
return 1;
}
/*
* these can be called to turn the fpu on or off for user procs,
* not just at system start up or shutdown.
*/
void
fpoff(void)
{
if (m->fpon) {
fpwr(Fpexc, 0);
m->fpon = 0;
}
}
void
fpononly(void)
{
if (!m->fpon && havefp()) {
/* enable fp. must be first operation on the FPUs. */
fpwr(Fpexc, Fpenabled);
m->fpon = 1;
}
}
static void
fpcfg(void)
{
int impl;
ulong sid;
static int printed;
/* clear pending exceptions; no traps in vfp3; all v7 ops are scalar */
m->fpscr = Dn | Fz | FPRNR | (FPINVAL | FPZDIV | FPOVFL) & ~Alltraps;
fpwr(Fpscr, m->fpscr);
m->fpconfiged = 1;
if (printed)
return;
sid = fprd(Fpsid);
impl = sid >> 24;
print("fp: %s arch %s; rev %ld\n", implement(impl),
subarch(impl, (sid >> 16) & MASK(7)), sid & MASK(4));
printed = 1;
}
void
fpinit(void)
{
if (havefp()) {
fpononly();
fpcfg();
}
}
void
fpon(void)
{
if (havefp()) {
fpononly();
if (m->fpconfiged)
fpwr(Fpscr, (fprd(Fpscr) & Allcc) | m->fpscr);
else
fpcfg(); /* 1st time on this fpu; configure it */
}
}
void
fpclear(void)
{
// ulong scr;
fpon();
// scr = fprd(Fpscr);
// m->fpscr = scr & ~Allexc;
// fpwr(Fpscr, m->fpscr);
fpwr(Fpexc, fprd(Fpexc) & ~Fpmbc);
}
/*
* Called when a note is about to be delivered to a
* user process, usually at the end of a system call.
* Note handlers are not allowed to use the FPU so
* the state is marked (after saving if necessary) and
* checked in the Device Not Available handler.
*/
void
fpunotify(Ureg*)
{
if(up->fpstate == FPactive){
fpsave(up->fpsave);
up->fpstate = FPinactive;
}
up->fpstate |= FPillegal;
}
/*
* Called from sysnoted() via the machine-dependent
* noted() routine.
* Clear the flag set above in fpunotify().
*/
void
fpunoted(void)
{
up->fpstate &= ~FPillegal;
}
/* should only be called if p->fpstate == FPactive */
void
fpsave(FPsave *fps)
{
int n;
fpon();
fps->control = fps->status = fprd(Fpscr);
assert(m->fpnregs);
for (n = 0; n < m->fpnregs; n++)
fpsavereg(n, (uvlong *)fps->regs[n]);
fpoff();
}
static void
fprestore(Proc *p)
{
int n;
fpon();
fpwr(Fpscr, p->fpsave->control);
m->fpscr = fprd(Fpscr) & ~Allcc;
assert(m->fpnregs);
for (n = 0; n < m->fpnregs; n++)
fprestreg(n, *(uvlong *)p->fpsave->regs[n]);
}
/*
* Called from sched() and sleep() via the machine-dependent
* procsave() routine.
* About to go in to the scheduler.
* If the process wasn't using the FPU
* there's nothing to do.
*/
void
fpuprocsave(Proc *p)
{
if(p->fpstate == FPactive){
if(p->state == Moribund)
fpclear();
else{
/*
* Fpsave() stores without handling pending
* unmasked exeptions. Postnote() can't be called
* here as sleep() already has up->rlock, so
* the handling of pending exceptions is delayed
* until the process runs again and generates an
* emulation fault to activate the FPU.
*/
fpsave(p->fpsave);
}
p->fpstate = FPinactive;
}
}
/*
* The process has been rescheduled and is about to run.
* Nothing to do here right now. If the process tries to use
* the FPU again it will cause a Device Not Available
* exception and the state will then be restored.
*/
void
fpuprocrestore(Proc *)
{
}
/*
* The current process has been forked,
* save and copy neccesary state to child.
*/
void
fpuprocfork(Proc *p)
{
int s;
s = splhi();
switch(up->fpstate & ~FPillegal){
case FPactive:
fpsave(up->fpsave);
up->fpstate = FPinactive;
/* no break */
case FPinactive:
memmove(p->fpsave, up->fpsave, sizeof(FPsave));
p->fpstate = FPinactive;
}
splx(s);
}
/*
* Disable the FPU.
* Called from sysexec() via sysprocsetup() to
* set the FPU for the new process.
*/
void
fpusysprocsetup(Proc *p)
{
p->fpstate = FPinit;
fpoff();
}
static void
mathnote(void)
{
ulong status;
char *msg, note[ERRMAX];
status = up->fpsave->status;
/*
* Some attention should probably be paid here to the
* exception masks and error summary.
*/
if (status & FPAINEX)
msg = "inexact";
else if (status & FPAOVFL)
msg = "overflow";
else if (status & FPAUNFL)
msg = "underflow";
else if (status & FPAZDIV)
msg = "divide by zero";
else if (status & FPAINVAL)
msg = "bad operation";
else
msg = "spurious";
snprint(note, sizeof note, "sys: fp: %s fppc=%#p status=%#lux",
msg, up->fpsave->pc, status);
postnote(up, 1, note, NDebug);
}
static void
mathemu(Ureg *)
{
if(m->havefp == VFPv3 && !(fprd(Fpexc) & (Fpex|Fpdex)))
iprint("mathemu: not an FP exception but an unknown FP opcode\n");
switch(up->fpstate){
case FPemu:
error("illegal instruction: VFP opcode in emulated mode");
case FPinit:
fpinit();
up->fpstate = FPactive;
break;
case FPinactive:
/*
* Before restoring the state, check for any pending
* exceptions. There's no way to restore the state without
* generating an unmasked exception.
* More attention should probably be paid here to the
* exception masks and error summary.
*/
if(up->fpsave->status & (FPAINEX|FPAUNFL|FPAOVFL|FPAZDIV|FPAINVAL)){
mathnote();
break;
}
fprestore(up);
up->fpstate = FPactive;
break;
case FPactive:
error("illegal instruction: bad vfp fpu opcode");
break;
}
fpclear();
}
void
fpstuck(uintptr pc)
{
if (m->fppc == pc && m->fppid == up->pid) {
m->fpcnt++;
if (m->fpcnt > 4)
panic("fpuemu: cpu%d stuck at pid %ld %s pc %#p "
"instr %#8.8lux", m->machno, up->pid, up->text,
pc, *(ulong *)pc);
} else {
m->fppid = up->pid;
m->fppc = pc;
m->fpcnt = 0;
}
}
enum {
N = 1<<31,
Z = 1<<30,
C = 1<<29,
V = 1<<28,
REGPC = 15,
};
static int
condok(int cc, int c)
{
switch(c){
case 0: /* Z set */
return cc&Z;
case 1: /* Z clear */
return (cc&Z) == 0;
case 2: /* C set */
return cc&C;
case 3: /* C clear */
return (cc&C) == 0;
case 4: /* N set */
return cc&N;
case 5: /* N clear */
return (cc&N) == 0;
case 6: /* V set */
return cc&V;
case 7: /* V clear */
return (cc&V) == 0;
case 8: /* C set and Z clear */
return cc&C && (cc&Z) == 0;
case 9: /* C clear or Z set */
return (cc&C) == 0 || cc&Z;
case 10: /* N set and V set, or N clear and V clear */
return (~cc&(N|V))==0 || (cc&(N|V)) == 0;
case 11: /* N set and V clear, or N clear and V set */
return (cc&(N|V))==N || (cc&(N|V))==V;
case 12: /* Z clear, and either N set and V set or N clear and V clear */
return (cc&Z) == 0 && ((~cc&(N|V))==0 || (cc&(N|V))==0);
case 13: /* Z set, or N set and V clear or N clear and V set */
return (cc&Z) || (cc&(N|V))==N || (cc&(N|V))==V;
case 14: /* always */
return 1;
case 15: /* never (reserved) */
return 0;
}
return 0; /* not reached */
}
/* only called to deal with user-mode instruction faults */
int
fpuemu(Ureg* ureg)
{
int s, nfp, cop, op;
uintptr pc;
if(waserror()){
postnote(up, 1, up->errstr, NDebug);
return 1;
}
if(up->fpstate & FPillegal)
error("floating point in note handler");
nfp = 0;
pc = ureg->pc;
validaddr(pc, 4, 0);
if(!condok(ureg->psr, *(ulong*)pc >> 28))
iprint("fpuemu: conditional instr shouldn't have got here\n");
op = (*(ulong *)pc >> 24) & MASK(4);
cop = (*(ulong *)pc >> 8) & MASK(4);
if(m->fpon)
fpstuck(pc); /* debugging; could move down 1 line */
if (ISFPAOP(cop, op)) { /* old arm 7500 fpa opcode? */
// iprint("fpuemu: fpa instr %#8.8lux at %#p\n", *(ulong *)pc, pc);
// error("illegal instruction: old arm 7500 fpa opcode");
s = spllo();
if(waserror()){
splx(s);
nexterror();
}
nfp = fpiarm(ureg); /* advances pc past emulated instr(s) */
if (nfp > 1) /* could adjust this threshold */
m->fppc = m->fpcnt = 0;
splx(s);
poperror();
} else if (ISVFPOP(cop, op)) { /* if vfp, fpu must be off */
mathemu(ureg); /* enable fpu & retry */
nfp = 1;
}
poperror();
return nfp;
}