ref: 1ee90265d5f764cb54b49531c4b247c5f404491c
dir: /lib/std/bytealloc.myr/
use sys
use "die"
use "extremum"
use "memops"
use "syswrap"
use "threadhooks"
use "types"
use "units"
use "result"
use "slfill"
use "backtrace"
pkg std =
const startalloctrace : (f : byte[:] -> void)
const endalloctrace : (-> void)
/* public for testing */
pkglocal const zbytealloc : (sz:size -> byte#)
const bytealloc : (sz:size -> byte#)
const bytefree : (m:byte#, sz:size -> void)
/* null pointers. only used internally. */
pkglocal const Zsliceptr = (0 : byte#)
pkglocal const Align = 16 /* minimum allocation alignment */
pkglocal const align : (m : std.size, align : std.size -> std.size)
pkglocal const allocsz : (sz : std.size -> std.size)
;;
const Zslab = (0 : slab#)
const Zchunk = (0 : chunk#)
const Slabsz = 4*MiB
const Cachemax = 4
const Bktmax = 128*KiB /* a balance between wasted space and falling back to mmap */
const Pagesz = 4*KiB
var buckets : bucket[32] /* excessive */
var trace : bool
var tracefd : std.fd
var cache : cacheelt[32]
type bucket = struct
sz : size /* aligned size */
nper : size /* max number of elements per slab */
slabs : slab# /* partially filled or free slabs */
cache : slab# /* cache of empty slabs, to prevent thrashing */
ncache : size /* size of cache */
;;
type slab = struct
head : byte# /* head of virtual addresses, so we don't leak address space */
next : slab# /* the next slab on the chain */
prev : slab# /* the prev slab on the chain */
freehd : chunk# /* the nodes we're allocating */
nfree : size /* the number of free nodes */
;;
/* NB: must be smaller than sizeof(slab) */
type chunk = struct
next : chunk# /* the next chunk in the free list */
;;
type cacheelt = struct
sz : std.size
p : byte#
;;
const __init__ = {
for var i = 0; i < buckets.len && (Align << i) <= Bktmax; i++
bktinit(&buckets[i], Align << i)
;;
}
const startalloctrace = {path
match openmode(path, Owrite | Ocreat, 0o644)
| `Ok fd: tracefd = fd
| `Err e: -> void
;;
trace = true
}
const endalloctrace = {
std.close(tracefd)
trace = false
}
const zbytealloc = {sz
var p
p = bytealloc(sz)
memfill(p, 0, sz)
-> p
}
const tracealloc = {p, sz
var stk : void#[23] /* [type, addr, sz, 10 stack slots] */
slfill(stk[:], (0 : void#))
stk[0] = (0 : void#)
stk[1] = (p : void#)
stk[2] = (sz : void#)
backtrace(stk[3:])
writealloctrace(stk[:])
}
const tracefree = {p, sz
var stk : void#[3]
stk[0] = (1 : void#)
stk[1] = (p : void#)
stk[2] = (sz : void#)
writealloctrace(stk[:])
}
const writealloctrace = {sl
var len, p
len = sl.len * sizeof(void#)
p = (sl : byte#)
write(tracefd, p[:len])
}
/* Allocates a blob that is 'sz' bytes long. Dies if the allocation fails */
const bytealloc = {sz
var bkt, p
sz += 8
if sz <= Bktmax
bkt = &buckets[bktnum(sz)]
lock(memlck)
p = bktalloc(bkt)
unlock(memlck)
else
p = bigalloc(sz)
;;
if trace
lock(memlck)
tracealloc(p, sz)
unlock(memlck)
;;
-> p
}
/* frees a blob that is 'sz' bytes long. */
const bytefree = {p, sz
var bkt
var v
if p == (0 : byte#)
-> void
;;
v = ((p : size) + sz : uint32#)#
if trace
lock(memlck)
tracefree(p, sz)
unlock(memlck)
;;
memfill(p, 0xa8, sz)
if (sz < Bktmax)
bkt = &buckets[bktnum(sz)]
lock(memlck)
bktfree(bkt, p)
unlock(memlck)
else
bigfree(p, sz)
;;
}
const bigalloc = {sz
var p
p = Failmem
sz = align(sz, Align)
/* check our cache */
lock(memlck)
for var i = 0; i < cache.len; i++
if sz > cache[i].sz
continue
;;
p = cache[i].p
if cache[i].sz - sz >= Bktmax
cache[i].sz -= sz
cache[i].p = ((p : intptr) + (sz : intptr) : byte#)
;;
break
;;
unlock(memlck)
if p != Failmem
-> p
;;
/* ok, lets give up and get memory from the os */
p = getmem(sz)
if p != Failmem
-> p
;;
die("could not get memory\n")
}
const bigfree = {p, sz
var minsz, minp, minidx
var endp, endblk
minp = p
minidx = -1
minsz = align(sz, Align)
endp = ((p : intptr) + (sz : intptr) : byte#)
lock(memlck)
for var i = 0; i < cache.len; i++
endblk = ((cache[i].p : intptr) + (sz : intptr) : byte#)
/* try to merge with a saved block */
if cache[i].p == endp
cache[i].sz += sz
cache[i].p = p
minsz = 0
break
elif endblk == p
cache[i].sz += sz
minsz = 0
break
;;
/* check for merges */
if cache[i].sz < minsz
minsz = cache[i].sz
minp = cache[i].p
minidx = i
;;
;;
unlock(memlck)
/* size of 0 means we found a slot. */
if minsz == 0
-> void
;;
freemem(minp, minsz)
if minidx >= 0
cache[minidx].p = p
cache[minidx].sz = sz
;;
}
/* Sets up a single empty bucket */
const bktinit = {b, sz
b.sz = align(sz, Align)
b.nper = (Slabsz - sizeof(slab))/b.sz
b.slabs = Zslab
b.cache = Zslab
b.ncache = 0
}
/* Creates a slab for bucket 'bkt', and fills the chunk list */
const mkslab = {bkt
var p, s
var b, bnext
var off /* offset of chunk head */
if bkt.ncache > 0
s = bkt.cache
bkt.cache = s.next
bkt.ncache--
-> s
;;
/*
tricky: we need power of two alignment, so we allocate double the
needed size, chop off the unaligned ends, and waste the address
space. Since the OS is "smart enough", this shouldn't actually
cost us memory, and 64 bits of address space means that we're not
going to have issues with running out of address space for a
while. On a 32 bit system this would be a bad idea.
*/
p = getmem(Slabsz*2)
if p == Failmem
die("Unable to get memory")
;;
s = (align((p : size), Slabsz) : slab#)
s.head = p
s.nfree = bkt.nper
s.next = Zslab
s.prev = Zslab
/* skip past the slab header */
off = align(sizeof(slab), Align)
bnext = nextchunk((s : chunk#), off)
s.freehd = bnext
for var i = 0; i < bkt.nper; i++
b = bnext
bnext = nextchunk(b, bkt.sz)
b.next = bnext
;;
b.next = Zchunk
-> s
}
/*
Allocates a node from bucket 'bkt', crashing if the
allocation cannot be satisfied. Will create a new slab
if there are no slabs on the freelist.
*/
const bktalloc = {bkt
var s
var b
/* find a slab */
s = bkt.slabs
if s == Zslab
s = mkslab(bkt)
bkt.slabs = s
if s == Zslab
die("No memory left")
;;
;;
/* grab the first chunk on the slab */
b = s.freehd
s.freehd = b.next
s.nfree--
if s.freehd == Zchunk
bkt.slabs = s.next
if s.next != Zslab
s.next.prev = Zslab
;;
;;
-> (b : byte#)
}
/*
Frees a chunk of memory 'm' into bucket 'bkt'.
Assumes that the memory already came from a slab
that was created for bucket 'bkt'. Will crash
if this is not the case.
*/
const bktfree = {bkt, m
var s, b
s = (mtrunc(m, Slabsz) : slab#)
b = (m : chunk#)
if s.nfree == 0
if bkt.slabs != Zslab
bkt.slabs.prev = s
;;
s.next = bkt.slabs
s.prev = Zslab
bkt.slabs = s
elif s.nfree == bkt.nper - 1
/* unlink the slab from the list */
if s.next != Zslab
s.next.prev = s.prev
;;
if s.prev != Zslab
s.prev.next = s.next
;;
if bkt.slabs == s
bkt.slabs = s.next
;;
/*
HACK HACK HACK: if we can't unmap, keep an infinite cache per slab size.
We should solve this better somehow.
*/
if bkt.ncache < Cachemax || !Canunmap
s.next = bkt.cache
s.prev = Zslab
bkt.cache = s
bkt.ncache++
else
/* we mapped 2*Slabsz so we could align it,
so we need to unmap the same */
freemem(s.head, Slabsz*2)
;;
-> void
;;
s.nfree++
b.next = s.freehd
s.freehd = b
}
/*
Finds the correct bucket index to allocate from
for allocations of size 'sz'
*/
const bitpos : byte[32] = [
0, 9, 1, 10, 13, 21, 2, 29, 11, 14, 16, 18, 22, 25, 3, 30,
8, 12, 20, 28, 15, 17, 24, 7, 19, 27, 23, 6, 26, 5, 4, 31
]
const bktnum = {sz
var n, v
v = (sz >> 3 : uint32)
v |= v >> 1
v |= v >> 2
v |= v >> 4
v |= v >> 8
v |= v >> 16
n = bitpos[((v * 0x07c4acdd) & 0xffff_ffffui) >> 27]
-> (n : size)
}
/*
returns the actual size we allocated for a given
size request
*/
const allocsz = {sz
var bktsz
if sz <= Bktmax
bktsz = Align
for var i = 0; bktsz <= Bktmax; i++
if bktsz >= sz
-> bktsz
;;
bktsz *= 2
;;
else
-> align(sz, Pagesz)
;;
die("Size does not match any buckets")
}
/*
aligns a size to a requested alignment.
'align' must be a power of two
*/
const align = {v, align
-> (v + align - 1) & ~(align - 1)
}
/*
chunks are variable sizes, so we can't just
index to get to the next one
*/
const nextchunk = {b, sz : size
-> ((b : intptr) + (sz : intptr) : chunk#)
}
/*
truncates a pointer to 'align'. 'align' must
be a power of two.
*/
const mtrunc = {m, align
-> ((m : intptr) & ~((align : intptr) - 1) : byte#)
}