ref: bccf958a86c52a27db9fab3f85f159ddc34629e8
dir: /doc/lang.txt/
The Myrddin Programming Language
Jul 2012
Updated Dec 2016
Ori Bernstein
TABLE OF CONTENTS:
1. ABOUT
2. LEXICAL CONVENTIONS
2.1. EBNF-ish
2.2. As-If Rule
3. STRUCTURE:
3.1. Whitespace and Keywords
3.2. Top Level Structure
3.3. Declarations
3.4. Packages and Uses
3.5. Scoping
4. TYPES
4.1. Primitive Types
4.2. User Defined Types
4.3. Generic Types
4.4. Traits and Impls
4.5. Type Inference
5. VALUES AND EXPRESSIONS
5.1. Literal Values
5.2. Expressions
6. CONTROL FLOW
6.1. Blocks
6.2. Conditionals
6.3. Matches
6.4. Looping
6.5. Goto
7. GRAMMAR
1. ABOUT:
Myrddin is designed to be a simple, low-level programming
language. It is designed to provide the programmer with
predictable behavior and a transparent compilation model,
while at the same time providing the benefits of strong type
checking, generics, type inference, and similar. Myrddin is
not a language designed to explore the forefront of type
theory or compiler technology. It is not a language that is
focused on guaranteeing perfect safety. Its focus is on being
a practical, small, fairly well defined, and easy to
understand language for work that needs to be close to the
hardware.
Myrddin is a computer language influenced strongly by C and
ML, with ideas from too many other places to name.
2. LEXICAL CONVENTIONS:
2.1. EBNF-ish:
Syntax is defined using an informal variant of EBNF.
token: /regex/ | "quoted" | <english description>
prod: prodname ":" expr*
expr: alt ( "|" alt )*
alt: term term*
term: prod | token | group | opt | rep
group: "(" expr ")" .
opt: "[" expr "]" .
rep: zerorep | onerep
zerorep: term "*"
onerep: term "+"
Whitespace and comments are ommitted in this description.
To put it in words, /regex/ defines a regular expression that would
match a single token in the input. "quoted" would match a single
string. <english description> contains an informal description of what
characters would match.
Productions are defined by any number of expressions, in which
expressions are '|' separated sequences of terms.
Terms can are productions or tokens, and may come with a repeat
specifier. wrapping a term in "[]" denotes that the term is repeated
0 or 1 times. suffixing it with a '*' denotes 0 or more repetitions,
and '+' denotes 1 or more repetitions.
2.2. As-If Rule:
Anything specified here may be treated however the compiler wishes,
as long as the result is observed as if the semantics specified were
followed strictly.
3. STRUCTURE:
3.1. Whitespace and Keywords:
The language is composed of several classes of tokens. There are
comments, identifiers, keywords, punctuation, and whitespace.
Comments begin with "/*" and end with "*/". They may nest.
/* this is a comment /* with another inside */ */
Identifiers begin with any alphabetic character or underscore, and
continue with alphanumeric characters or underscores. Currently the
compiler places a limit of 1024 bytes on the length of the identifier.
some_id_234__
Keywords are a special class of identifier that is reserved by the
language and given a special meaning. The full set of keywords are
listed below. Their meanings will be covered later in this reference
manual.
$noret _ break
castto const continue
elif else extern
false for generic
goto if impl
in match pkg
pkglocal sizeof struct
trait true type
union use var
void while
Literals are a direct representation of a data object within the
source of the program. There are several literals implemented within
the language. These are fully described in section 4.2 of this
manual.
Single semicolons (';') and newline (\n) characters are synonymous and
interchangable. They both are used to mark the end of logical lines,
and will be uniformly referred to as line terminators.
3.2. Top Level Structure:
file: (decl | package | use | implstmt | traitdef | tydef)*
A file is composed of a sequence of top level elements. These
top level elements consist of:
- Declarations:
These define a constant or a variable. It's worth noting
that Myrddin has no special syntax for declaring functions,
but instead assigns a closure to a variable or constant.
- Package Definitions:
These define the list of exported values from a file. As
part of compilation, all the exported names from a package
will get merged together from all the files being built
into that package.
- Use Statements:
These import symbols for use within the file. These symbols
come from either installed packages or files within the
project being compiled.
- Type Definitions:
These define new types.
- Trait Definitions:
These define traits, which are attributes on types that
may be implemented by impl functions. They define required
functions on the type.
- Impl Statements:
These define implementations of traits, allowing an
existing trait to be attached to an existing type.
3.3. Declarations:
decl: attrs ("var" | "const" | "generic") decllist
attrs: ("exern" | "pkglocal" | "$noret")+
decllist: declbody ("," declbody)*
declbody: declcore ["=" expr]
declcore: name [":" type
A declaration consists of a declaration class (i.e., one
of 'const', 'var', or 'generic'), followed by a declaration
name, optionally followed by a type and assignment. One thing
you may note is that unlike most other languages, there is no
special function declaration syntax. Instead, a function is
declared like any other value: by assigning its name to a
constant or variable.
const: Declares a constant value, which may not be
modified at run time. Constants must have
initializers defined.
var: Declares a variable value. This value may be
assigned to, copied from, and modified.
generic: Declares a specializable value. This value
has the same restrictions as a const, but
taking its address is not defined. The type
parameters for a generic must be explicitly
named in the declaration in order for their
substitution to be allowed.
In addition, declarations may accept a number of modifiers which
change the attributes of the declarations:
extern: Declares a variable as having external linkage.
Assigning a definition to this variable within the
file that contains the extern definition is an error.
pkglocal: Declares a variable which is local to the package.
This variable may be used from other files that
declare the same `pkg` namespace, but referring to
it from outside the namespace is an error.
$noret: Declares the function to which this is applied as
a non-returning function.
Examples:
Declare a constant with a value 123. The type is not defined,
and will be inferred:
const x = 123
Declare a variable with no value and no type defined. The
value can be assigned later (and must be assigned before use),
and the type will be inferred.
var y
Declare a generic with type '@a', and assigns it the value
'blah'. Every place that 'z' is used, it will be specialized,
and the type parameter '@a' will be substituted.
generic z : @a = blah
Declare a function f with and without type inference. Both
forms are equivalent. 'f' takes two parameters, both of type
int, and returns their sum as an int
const f = {a, b
var c : int = 42
-> a + b + c
}
const f : (a : int, b : int -> int) = {a : int, b : int -> int
var c : int = 42
-> a + b + c
}
3.4. Packages and Uses
package: "pkg" ident = decl* ";;"
use: bareuse | quoteuse
bareuse: use ident
quoteuse: use "<quoted string>"
There are two keywords for module system. 'use' is the simpler
of the two, and has two cases:
use syspkg
use "localfile"
The first form, which does not have the package name quoted, will
search the system include paths for the package listed. It does not
search relative to the file or the compiler working directory.
The quoted form searches the current directory for a use file named
"localpkg" and imports it.
The 'pkg' keyword allows you to define a (partial) package by
listing the symbols and types for export. For example,
pkg mypkg =
type mytype
const Myconst : int = 42
const myfunc : (v : int -> bool)
;;
declares a package "mypkg", which defines three exports, "mytype",
"Myconst", and "myfunc". The definitions of the values may be
defined in the 'pkg' specification, but it is preferred to implement
them in the body of the code for readability. Scanning the export
list is desirable from a readability perspective.
3.5. Scoping:
Myrddin is a lexically scoped language, with namespaces and types
defined in a way that facilitates separate compilation with minimal
burden on the linker.
In Myrddin, declarations may appear in any order, and be used at any
point at which it is in scope. Any global symbols are initialized
before the program begins. Any nonglobal symbols are initialized
on the line where they are defined. This decision allows for slightly
strange code, but allows for mutually recursive functions with no
forward declarations or special cases.
3.5.1. Scope Rules:
Myrddin follows the usual lexical scoping rules. A variable
may be defined on any line in the program. From there, any
expressions within that block and its sub blocks may refer
to it.
The variables declared in constructs starting a block are
scoped to that block. For example, in `for var i = 0; ...`,
the variable `i` is scoped to the body of the for loop.
In the function `{x, y; funcbody()}`, the variables `x` and
`y` are scoped to the body of the function.
Variables may shadow other variables, with the exception of
captured variables in pattern matches. The rules for matches
are covered in depth in section 6.3, but the rationale for
this is to prevent ambiguity when matching against defined
constants.
3.5.2. Capturing Variables:
When a closure is created, it captures all of the variables
that it refers to in its scope by value. This allows for
simple heapification of the closure.
For example:
var x = 1
var closure = {; -> x}
x++
std.put("x: {}, closure(): {}\n", x, closure())
should output:
x: 2, closure(): 1
3.5.2. Namespaces:
A namespace introduced by importing a package is gramatically
equivalent to a struct member lookup. The namespace is not
optional.
3.6. Program Initialization:
Any file may define a single function name `__init__`. This function
will be invoked before `main` runs, and after the `__init__ `function
for all files included through use statements.
4. TYPES:
type: primitivetype | compositetype | aggrtype | nametype
The language defines a number of built in primitive types. These
are not keywords, and in fact live in a separate namespace from
the variable names. Yes, this does mean that you could, if you want,
define a variable named 'int'.
There are no implicit conversions within the language. All types
must be explicitly cast if you want to convert, and the casts must
be of compatible types, as will be described later.
4.1. Primitive types:
primitivetype: misctype | inttype | flttype
misctype: "void" | "bool" | "char" | "byte"
inttype: "int8" | "uint8" |
"int16" | "uint16" |
"int32" | "uint32" |
"int64" | "uint64" |
"int" | "uint"
flttype: "flt32" | "flt64"
It is important to note that these types are not keywords, but are
instead merely predefined identifiers in the type namespace.
'void' is a type containing exactly one value, `void`. It is a full
first class value, which can be assigned between variables, stored in
arrays, and used in any place any other type is used. Void has size
`0`.
bool is a type that can only hold true and false. It can be assigned,
tested for equality, and used in the various boolean operators.
char is a 32 bit integer type, and is guaranteed to hold exactly one
Unicode codepoint. It can be assigned integer literals, tested
against, compared, and all the other usual numeric types.
The various [u]intN types hold, as expected, signed and unsigned
integers of the named sizes respectively. All arithmetic on them is
done in complement twos of bit size N.
Similarly, floats hold floating point types with the indicated
precision. They are operated on according to the IEEE754 rules.
var x : int declare x as an int
var y : float32 declare y as a 32 bit float
4.2. User Defined Types:
4.2.1: Composite Types
compositetype: ptrtype | slicetype | arraytype
ptrtype: type "#"
slicetype: type "[" ":" "]"
arraytype: type "[" expr "]" | type "[" "..." "]"
Pointers are, as expected, values that hold the address of the pointed
to value. They are declared by appending a '#' to the type. Pointer
arithmetic is not allowed. They are declared by appending a '#' to the
base type
Arrays are a group of N values, where N is part of the type, meaning
that different sizes are incompatible. They are passed by value. Their
size must be a compile time constant.
If the array size is specified as "...", then the array has zero bytes
allocated to store it, and bounds are not checked. This is used to
facilitate flexible arrays at the end of a struct, as well as C ABI.
Slices are similar to arrays in many contemporary languages. They are
reference types that store the length of their contents. They are
declared by appending a '[,]' to the base type.
foo# type: pointer to foo
foo[N] type: array size N of foo
foo[:] type: slice of foo
4.2.2. Aggregate types:
aggrtype: tupletype | structtype | uniontype
tupletype: "(" (tupleelt ",")+ ")"
structtype: "struct" "\n" (declcore "\n"| "\n")* ";;"
uniontype: "union" "\n" ("`" Ident [type] "\n"| "\n")* ";;"
Tuples are the traditional product type. They are declared by putting
the comma separated list of types within square brackets.
Structs are aggregations of types with named members. They are
declared by putting the word 'struct' before a block of declaration
cores (ie, declarations without the storage type specifier).
Unions are a traditional sum type. The tag defines the value that may
be held by the type at the current time. If the tag has an argument,
then this value may be extracted with a pattern match. Otherwise, only
the tag may be matched against.
(int, int, char) a tuple of 2 ints and a char
struct a struct containing an int named a :
int 'a', and a char named 'b'. b : char ;;
union a union containing one of
`Thing int int or char. The values are not
`Other float32 named, but they are tagged.
;;
4.2.3. Named Types:
tydef: "type" ident ["(" params ")"] = type
params: typaram ("," typaram)*
nametype: name ["(" typeargs ")"]
typeargs: type ("," type)*
Users can define new types based on other types. These named
types may optionally have parameters, which make the type into
a parameterized type.
For example:
type size = int64
would define a new type, distinct from int64, but inheriting
the same traits.
type list(@a) = struct
next : list(@a)#
val : @a
;;
would define a parameterized type named `list`, which takes a single
type parameter `@a`. When this type is used, it must be supplied a
type argument, which will be substituted throughout the right hand
side of the type definition. For example:
var x : list(int)
would specialize the above list type to an integer. All
specializations with compatible types are compatible.
4.3. Generic types:
typaram: "@" ident ["::" paramlist]
paramlist: ident | "(" ident ("," ident)* ")"
A nametype refers to a (potentially parameterized) named type, as
defined in section 4.5.
A typaram ("@ident") is a type parameter. It is introduced as either a
parameter of a generic declaration, or as a type paramteter in a
defined type. It can be constrained by any number of traits, as
described in section 4.6.
These types must be specialized to a concrete type in order to be
used.
@foo A type parameter
named '@foo'.
4.4. Traits and Impls:
4.4.1. Traits:
traitdef: "trait" ident traittypes "=" traitbody ";;"
traittypes: typaram ["->" type ("," type)*]
traitbody: (name ":" type)*
Traits provide an interface that types implementing the trait
must conform to. They are defined using the `trait` keyword,
and implemented using the `impl` keyword.
A trait is defined over a primary type, and may also define
a number of auxiliary types that the implementation can make
more specific. The body of the trait lists a number of
declarations that must be implemented by the implementation of the
trait. This body may be empty.
For example:
trait foo @a = ;;
defines a trait named `foo`. This trait has an empty body. It
applies over a type parameter named @a.
The definition:
trait foo @a -> @aux = ;;
is similar, but also has a single auxiliary type. This type can be
used to associate types with the primary type when the impl is
specialized. For example:
trait gettable @container -> @contained =
const get : (c : @container -> @contained)
;;
would define a trait that requires a get function which accepts
a parameter of type `@container`, and returns a value of type
`@contained`.
4.4.2. Impls:
implstmt: "impl" ident imptypes "=" implbody
traittypes: type ["->" type ("," type)*]
traitbody: (name [":" type] "=" expr)*
Impls take the interfaces provided by traits, and attach them
to types, as well as providing the concrete implementation of
these types. The declarations are inserted into the global
namespace, and act identically to generics in.
The declarations need not be functions.
4.5. Type Inference:
4.7.1. Overview:
Myrddin uses a variant on the Hindley Milner type system. The
largest divergence is the lack of implicit generalization when
a type is unconstrained. In Myrddin, this unconstrained type
results in a type checking failure.
In the Myrddin type system, each leaf expression is assigned
an appropriate type, or a placeholder indicated by `$n`. Then,
expressions and declarations are walked over and unified,
fixing and constraining the types, as well as recording delayed
unifications where needed.
Delayed unifications and default types are then applied, and
the unit of the program is checked for underconstrained types.
4.7.2. Unification
When an expression is applied, the types are unified according to
the type of the operator, as specified in section 5.2. The type of
the operator is freshened, replacing @t with $n. This produces
the appropriate type variables. Then the left hand and right hand
side of the of the expression are unified with this freshened
type equation.
4.7.3. Delayed Unification
In order to allow for the assignment of literals to defined types,
when a union literal or integer literal has its type inferred,
instead of immediately unifying it with a concrete type, a delayed
unification is recorded. Because checking the validity of members
is impossible when the base type is not known, member lookups are
also inserted into the delayed unification list.
After the initial unification pass is complete, the delayed
unification list is walked, and any unifications on this list
are applied. Because a delayed unification may complete members
and permit additional auxiliary type lookups, this step may need
to be repeated a number of times, although this is rare: Usually
a single pass suffices.
5. VALUES AND EXPRESSIONS
5.1. Literal Values
5.1.1. Atomic Literals:
literal: strlit | chrlit | intlit |
boollit | voidlit | floatlit |
funclit | seqlit | tuplit
strlit: \"(byte|escape)*\"
chrlit: \'(utf8seq|escape)\'
char: <any byte value>
boollit: "true"|"false"
voidlit: "void"
escape: <any escape sequence>
intlit: "0x" digits | "0o" digits | "0b" digits | digits
floatlit: digit+"."digit+["e" digit+]
5.1.1.1. String Literals:
String literals represent a compact method of representing a
byte array. Any byte values are allowed in a string literal,
and will be spit out again by the compiler unmodified, with
the exception of escape sequences.
There are a number of escape sequences supported for both character
and string literals:
\n newline
\r carriage return
\t tab
\b backspace
\" double quote
\' single quote
\v vertical tab
\\ single slash
\0 nul character
\xDD single byte value, where DD are two hex digits.
\u{xxx} unicode escape, emitted as utf8.
String literals begin with a ", and continue to the next
unescaped ".
eg: "foo\"bar"
Multiple consecutive string literals are implicitly merged to create
a single combined string literal. To allow a string literal to span
across multiple lines, the new line characters must be escaped.
eg: "foo" \
"bar"
They have the type `byte[:]`
5.1.1.2. Character Literals:
Character literals represent a single codepoint in the
character set. A character starts with a single quote,
contains a single codepoint worth of text, encoded either as
an escape sequence or in the input character set for the
compiler (generally UTF8). They share the same set of escape
sequences as string literals.
eg: 'א', '\n', '\u{1234}'
They have the type `char`.
5.1.1.3. Integer Literals
Integers literals are a sequence of digits, beginning with a digit
and possibly separated by underscores. They may be prefixed with
"0x" to indicate that the following number is a hexadecimal value,
0o to indicate an octal value, or 0b to indicate a binary value.
Decimal values are not prefixed.
eg: 0x123_fff, 0b1111, 0o777, 1234
They have the type `@a::(numeric,integral)
5.1.1.4: Boolean Literals:
Boolean literals are spelled `true` or `false`.
Unsurprisingly, they evaluate to `true` or `false`
respectively.
eg: true, false
They have the type `bool`
5.1.1.4: Boolean Literals:
Void literals are spelled `void`. They evaluate to the void
value, a value that takes zero bytes storage, and contains
only the value `void`. Like my soul.
eg: void
They have type `void`.
5.1.1.5: Floating point literals:
Floating-point literals are also a sequence of digits beginning with a
digit and possibly separated by underscores. Floating point
literals are always in decimal.
eg: 123.456, 10.0e7, 1_000.
They have type `@a::(numeric,floating)`
5.1.2. Sequence and Tuple Literals:
seqlit: "[" structelts | arrayelts "]"
tuplit: "(" tuplelts ")"
structelts: ("." ident "=" expr)+
arrayelts: (expr ":" expr | expr)*
tupelts: expr ("," expr)* [","]
Sequence literals are used to initialize either a structure
or an array. They are '['-bracketed expressions, and are evaluated
Tuple literals are similarly used to initialize a tuple.
Struct literals describe a fully initialized struct value.
A struct must have at least one member specified, in
order to distinguish them from the empty array literal. All
members which are designated with a `.name` expression are
initialized to the expression passed. If an initializer is
omitted, then the value is initialized to the zero value for
that type.
Sequence literals describe either an array or a structure
literal. They begin with a '[', followed by an initializer
sequence and closing ']'. For array literals, the initializer
sequence is either an indexed initializer sequence[4], or an
unindexed initializer sequence. For struct literals, the
initializer sequence is always a named initializer sequence.
An unindexed initializer sequence is simply a comma separated
list of values. An indexed initializer sequence contains a
'#number=value' comma separated sequence, which indicates the
index of the array into which the value is inserted. A named
initializer sequence contains a comma separated list of
'.name=value' pairs.
A tuple literal is a parentheses separated list of values.
A single element tuple contains a trailing comma.
Example: Struct literal.
[.a = 42, .b="str"]
Example: Array literal:
[1,2,3], [2:3, 1:2, 0:1], []
Example: Tuple literals:
(1,), (1,'b',"three")
A tuple has the type of its constituent values grouped
into a tuple:
(@a, @b, @c, ..., @z)
5.1.3. Function Literals:
funclit: "{" arglist "\n" blockbody "}"
arglist: (ident [":" type])*
Function literals describe a function. They begin with a '{',
followed by a newline-terminated argument list, followed by a
body and closing '}'. These may be specified at any place that
an expression is specified, assigned to any variable, and are
not distinguished from expressions in any significant way.
Function literals may refer to variables outside of their scope.
These are treated differently in a number of ways. Variables with
global scope are used directly, by value.
If a function is defined where stack variables are in scope,
and it refers to them, then the stack variables shall be copied
to an environment on thes stack. That environment is scoped to
the lifetime of the stack frame in which it was defined. If it
does not refer to any of its enclosing stack variables, then
this environment will not be created or accessed by the function.
This environment must be transferrable to the heap in an
implementation specific manner.
Example: Empty function literal:
{;}
Example: Function literal
{a : int, b
-> a + b
}
Example: Nested function with environment:
const fn = {a
var b = {; a + 1}
}
A function literal has the arity of its argument list,
and shares their type if it is provided. Otherwise,
they are left generic. The same applies to the return type.
5.1.4: Labels:
label: ":" ident
goto: "goto" ident
Finally, while strictly not a literal, it's not a control
flow construct either. Labels are identifiers preceded by
colons.
eg: :my_label
They can be used as targets for gotos, as follows:
goto my_label
the ':' is not part of the label name.
5.2. Expressions:
5.2.1. Summary and Precedence:
expr: expr <binop> expr | prefixexpr | postfixexpr
postfixexpr: <prefixop> postfixexpr
prefixexpr: atomicexpr <unaryop>
Myrddin expressions should be fairly familiar to most programmers.
Expressions are represented by a precedence sorted heirarchy of
binary operators. These operators operate on prefix expressions,
which in turn operate on postfix expressions. And postfix
expressions operate on parenthesized expressions, literals, or
values.
For integers, all operations are done in complement twos
arithmetic, with the same bit width as the type being operated on.
For floating point values, the operation is according to the
IEE754 rules.
The operators are listed below in order of precedence, and a short
summary of what they do is listed given. For the sake of clarity, 'x'
will stand in for any expression composed entirely of subexpressions
with higher precedence than the current current operator. 'e' will
stand in for any expression. Assignment is right associative. All
other expressions are left associative.
Arguments are evaluated in the order of associativity. That is,
if an operator is left associative, then the left hand side of
the operator will be evaluated before the right side. If the
operator is right associative, the opposite is true.
The specific semantics are covered in later parts of section 5.2.
Precedence 13:
x Atomic expression
literal Atomic expression
(expr) Atomic expression
Precedence 12:
x.name Member lookup
x++ Postincrement
x-- Postdecrement
x# Dereference
x[e] Index
x[lo:hi] Slice
x(arg,list) Call
Precedence 11:
&x Address
!x Logical negation
~x Bitwise negation
+x Positive (no operation)
-x Negate x
Precedence 10:
x << y Shift left
x >> y Shift right
Precedence 9:
x * y Multiply
x / y Divide
x % y Modulo
Precedence 8:
x + y Add
x - y Subtract
Precedence 7:
x & y Bitwise and
Precedence 6:
x | y Bitwise or
x ^ y Bitwise xor
Precedence 5:
`Name x Union construction
Precedence 4:
x == x Equality
x != x Inequality
x > x Greater than
x >= x Greater than or equal to
x < x Less than
x <= x Less than or equal to
Precedence 3:
x && y Logical and
Precedence 2:
x || y Logical or
Precedence 1: Assignment Operators
x = y Assign Right assoc
x += y Fused add/assign Right assoc
x -= y Fused sub/assign Right assoc
x *= y Fused mul/assign Right assoc
x /= y Fused div/assign Right assoc
x %= y Fused mod/assign Right assoc
x |= y Fused or/assign Right assoc
x ^= y Fused xor/assign Right assoc
x &= y Fused and/assign Right assoc
x <<= y Fused shl/assign Right assoc
x >>= y Fused shr/assign Right assoc
Precedence 0:
-> x Return expression
5.2.2. Atomic Expressions:
atomicexpr: ident | gap | literal | "(" expr ")" |
"sizeof" "(" type ")" | castexpr
castexpr: "(" expr ":" type ")"
gap: "_"
Atomic expressions are the building blocks of expressions, and
are either parenthesized expressions or directly represent
literals. Literals are covered in depth in section 4.2.
An identifier specifies a variable, and are looked up via
the scoping rules specified in section 4.9.
Gap expressions (`_`) represent an anonymous sink value. Anything
can be assigned to a gap, and it may be used in pattern matching.
It is equivalent to creating a new temporary that is never read
from whenever it is used. For example:
_ = 123
is equivalent to:
var anon666 = 123
In match contexts, it is equivalent to a fresh variable in the
match, again, given that it is never read from in the body of the
match.
An represents a location in the machine that can be stored
to persistently and manipulated by the programmer. An obvious
example of this would be a variable name, although
5.2.3. Cast Expressions:
Cast expressions convert a value from one type to another.
Casting proceeds according to the following rules:
SType DType Action
-------------------------------------------------------------
int/int Conversions
-------------------------------------------------------------
intN intK If n < k, sign extend the source
type, filling the top bits with the
sign bit of the source until it is the
same width as the destination type.
if n > k, truncate the top bits of the
source to the width of the destination
type.
uintN uintK If n < k, zero extend the source
type, filling the top bits with zero
until it is the same width as the
destination type.
If n > k, truncate the top bits of the
source to the width of the destination
type.
-------------------------------------------------------------
int/float conversions
-------------------------------------------------------------
intN fltN The closest representable integer value
to the source should be stored in the
destination.
uintN fltN The closest representable integer value
to the source should be stored in the
destination.
fltN intN The closest representable integer value
to the source should be stored in the
destination.
fltN uintN The closest representable integer value
to the source should be stored in the
destination.
-------------------------------------------------------------
int/pointer conversions
-------------------------------------------------------------
intN T# Extend the source value to the width
of a pointer in bits in an implementation
defined manner.
uintN T# Extend the source value to the width
of a pointer in bits in an implementation
defined manner.
T# intN Convert the address of the pointer to an
integer in an implementation specified
manner. There should exist at least one
integer type for which this conversion
will round trip.
T# uintN Convert the address of the pointer to an
integer in an implementation specified
manner. There should exist at least one
integer type for which this conversion
will round trip.
-------------------------------------------------------------
pointer/pointer conversions
-------------------------------------------------------------
T# U# If the destination type has compatible
alignment and other storage requirements,
the pointer should be converted losslessly
and in a round-tripping manner to point to
a U. If it does not have compatible
requirements, the conversion is not
required to round trip safely, but should
still produce a valid pointer.
-------------------------------------------------------------
pointer/slice conversions
-------------------------------------------------------------
T[:] T# Returns a pointer to t[0]
-------------------------------------------------------------
pointer/function conversions
-------------------------------------------------------------
(args->ret) T# Returns a pointer to an implementation
specific value representing the executable
code for the function.
-------------------------------------------------------------
arbitrary type conversions
-------------------------------------------------------------
T U Returns a T as a U. T must be transitively
defined in terms of U, or U in terms of T
for this cast to be valid.
5.2.4. Assignments:
lval = rval, lval <op>= rval
The assignment operators, group from right to left. These are the
only operators that have right associativity. All of them require
the left operand to be an lvalue. The value of the right hand side
of the expression is stored on the left hand side after this
statement has executed.
The fused assignment operators are equivalent to applying the
arithmetic or bitwise operator to the lhs and rhs of the
expression before storing into the lhs.
Type:
( e1 : @a <op>= e2 : @a ) : @a
5.2.5. Logical Or:
e1 || e2
The `||` operator returns true if the left hand side evaluates to
true. Otherwise it returns the result of evaluating the lhs. It is
guaranteed if the rhs is true, the lhs will not be evaluated.
Types:
( e1 : bool || e2 : bool ) : bool
5.2.6. Logical And:
expr && expr
The `&&` operator returns false if the left hand side evaluates to
false. Otherwise it returns the result of evaluating the lhs. It
is guaranteed if the rhs is true, the lhs will not be evaluated.
The left hand side and right hand side of the expression must
be of the same type. The whole expression evaluates to the type
of the lhs.
Type:
( e1 : bool && e2 : bool ) : bool
5.2.7: Logical Negation:
!expr
Takes the boolean expression `expr` and inverts its truth value,
evaluating to `true` when `expr` is false, and `false` when `expr`
is true.
Type:
!(expr : bool) : bool
5.2.8. Equality Comparisons:
expr == expr, expr != expr
The equality operators do a shallow identity comparison between
types. The `==` operator yields true if the values compare equal,
or false if they compare unequal. The `!=` operator evaluates to
the inverse of this.
Type:
( e1 : @a == e2 : @a ) : bool
( e1 : @a != e2 : @a ) : bool
5.2.9. Relational Comparisons:
expr > expr, expr >= expr, expr < expr, expr <= expr
The relational operators (>, >=, <, <=) compare two values
numerically. The `>` operator evaluates to true if its left
operand is greater than the right operand. The >= operand returns
true if the left operand is greater than or equal to the right
operand. The `<` and `<=` operators are similar, but compare
for less than.
Type:
( e1 : @a OP e2 : @a ) : bool
where @a :: numeric
5.2.10. Union Constructors:
`Name expr:
The union constructor operator takes the value in `expr` and wraps
it in a union. The type of the expression and the argument of the
union tag must match. The result of this expression is subject to
delayed unification, with a default value being the type of the
union the tag belongs to.
Type:
Delayed unification with the type of the union tag.
5.2.11. Bitwise:
expr | expr, expr ^ expr, expr & expr
These operators (|, ^, &) compute the bitwise or, xor, and and
of their operands respectively. The arguments must be integers.
Type:
(e1 : @a OP e2:@a) : @a
where @a :: integral
5.2.12. Addition:
expr + expr, expr - expr:
These operators (+, -) add and subtract their operands. For
integers, all operations are done in complement twos arithmetic,
with the same bit width as the type being operated on. For
floating point values, the operation is according to the IEE754
rules.
Type:
( e1 : @a OP e2 : @a ) : bool
where @a :: numeric
5.2.13. Multiplication and Division
expr * expr, expr / expr
These operators (+, -) multiply and divide their operands,
according to the usual arithmetic rules.
Type:
( e1 : @a OP e2 : @a ) : bool
where @a :: numeric
5.2.14. Modulo:
expr % expr
The modulo operator computes the remainder of the left operand
when divided by the right operand.
Type:
( e1 : @a OP e2 : @a ) : bool
where @a :: (numeric,integral)
5.2.15. Shift:
expr >> expr, expr << expr
The shift operators (>>, <<) perform right or left shift on their
operands respectively. If an operand is signed, a right shift will
shifts sign extend its operand. If it is unsigned, it will fill
the top bits with zeros.
Shifting by more bits than the size of the type is implementation
defined.
Type:
(e1 : @a OP e2:@a) : @a
where @a :: integral
5.2.16: Postincrement, Postdecrement:
expr++, expr--
These expressions evaluate to `expr`, and produce a decrement after
the expression is fully evaluated. Multiple increments and
decrements within the same expression are aggregated and applied
together. For example:
y = x++ + x++
is equivalent to:
y = x + x
x += 2
The operand must be integral.
Type:
(e1++ : @a) : @a
(e1-- : @a) : @a
where @a :: integral
5.2.17: Address:
&expr
The `&` operator computes the address of the object referred to
by `expr`. `expr` must be an lvalue.
Type:
&(expr : @a) : @a#
5.2.18: Dereference:
expr#
The `#` operator refers to the value at the pointer `expr`. This
is an lvalue, and may be stored to.
Type:
(expr : @a#)# : @a
5.2.17: Sign Operators:
-expr, +expr
The `-` operator computes the complement two negation of the value
`expr`. It may be applied to unsigned values. The `+` operator
only exists for symmetry, and is a no-op.
Type:
OP(expr : @a) : @a
5.2.19: Member Lookup:
expr.name
Member lookup operates on two classes of types: User defined
struct and sequences. For user defined structs, the type of `expr`
must be a structure containing the member `name`. The result of
the expression is an lvalue of the type of that member.
For sequences such as slices or arrays, there is exactly one
member that may be accessed, `len`. The value returned is the
count of elements in the sequence.
Type:
(expr : <aggregate>).name : @a
(expr : <seq>).len : @idx
where @idx :: (integral,numeric)
5.2.22: Index:
expr[idx]
The indexing operator operates on slices and arrays. The
`idx`th value in the sequence is referred to. This expression
produces an lvalue.
If `idx` is larger than `expr.len`, then the program must
terminate.
Type:
(expr : @a[N])[(idx : @idx)] : @a
(expr : @a[:])[(idx : @idx)] : @a
where @idx :: (integral,numeric)
5.2.23: Slice:
expr[lo:hi], expr[:hi], expr[lo:], expr[:]
The slice expression produces a sub-slice of the sequence
or pointer expression being sliced. The elements contained
in this slice are expr[lo]..expr[hi-1].
If the lower bound is omitted, then it is implicitly zero. If the
upper bound is ommitted, then it is implicitly `expr.len`.
Type:
(expr : @a[N])[(lo : @lo) : (hi : @hi)] : @a[:]
(expr : @a[:])[(lo : @lo) : (hi : @hi)] : @a[:]
(expr : @#)[(lo : @lo) : (hi : @hi)] : @a[:]
where @lo :: (integral,numeric)
and @hi :: (integral,numeric)
5.2.24: Call:
expr()
expr(arg1, arg2)
expr(arg1, arg2, ...)
A function call expression takes an expression of type
(arg, list -> ret), and applies the arguments to it,
producing a value of type `ret`. The argument types and
arity must must match, unless the final argument is of
type `...`.
If the final type is `...`, then the `...` consumes as many
arguments as are provided, and passes both them and an
implementation defined description of their types to the function.
Type:
(expr : @fn)(e1 : @a, e2 : @b) : @ret
where @fn is a function of type (@a, @b -> @ret)
or @fn is a function of type (@a, ... -> ret)
adjusted appropriately for arity.
6. CONTROL FLOW
The control statements in Myrddin are similar to those in many other
popular languages, and with the exception of 'match', there should
be no surprises to a user of any of the Algol derived languages.
6.1. Blocks:
block: blockbody ";;"
blockbody: (decl | stmt | tydef | "\n")*
stmt: goto | break | continue | retexpr | label |
ifstmt | forstmt | whilestmt | matchstmt
Blocks are the basic building block of functionality in Myrddin. They
are simply sequences of statements that are completed one after the
other. They are generally terminated by a double semicolon (";;"),
although they may be terminated by keywords if they are part of a more
complex control flow construct.
Any declarations within the block are scoped to within the block,
and are not accessible outside of it. Their storage duration is
limited to within the block, and any attempts to access the associated
storage (via pointer, for example) is not valid.
6.2. Conditionals
ifstmt: "if" cond "\n" blockbody
("elif" blockbody)*
["else" blockbody] ";;"
If statements branch one way or the other depending on the truth
value of their argument. The truth statement is separated from the
block body
if true
std.put("The program always get here")
elif elephant != mouse
std.put("...eh.")
else
std.put("The program never gets here")
;;
6.3. Matches
matchstmt: "match" expr "\n" matchpat* ";;"
matchpat: "|" pat ":" blockbody
Match statements do pattern matching on values. They take as an
argument a value of type 't', and match it against a list of other
values of the same type. The patterns matched against can also contain
free names, which will be bound to the sub-value matched against. The
patterns are checked in order, and the first matching pattern has its
body executed, after which no other patterns will be matched. This
implies that if you have specific patterns mixed with by more general
ones, the specific patterns must come first.
Match patterns can be one of the following:
- Union patterns
These look like union constructors, only they define
a value to match against.
- Literal patterns
Any literal value can be matched against.
- Constant patterns
Any constant value can be matched against.
More types of pattern to match will be added over time.
Match statements consist of the keyword 'match', followed by
the expression to match against the patterns, followed by a
newline. The body of the match statement consists of a list
of pattern clauses. A patterned clause is a '|', followed by
a pattern, followed by a ':', followed by a block body.
An example of the syntax follows:
const Val234 = `Val 234 /* set up a constant value */
var v = `Val 123 /* set up variable to match */
match v
/* pattern clauses */
| `Val 123:
std.put("Matched literal union pat\n")
| Val234:
std.put("Matched const value pat\n")
| `Val a:
std.put("Matched pattern with capture\n")
std.put("Captured value: a = {}\n", a)
| a
std.put("A top level bind matches anything.")
| `Val 111
std.put("Unreachable block.")
;;
6.4. Looping
forstmt: foriter | foreach
foreach: "for" pattern "in" expr "\n" block
foriter: "for" init "\n" cond "\n" step "\n" block
whilestmt: "while" cond "\n" block
For statements come in two forms. There are the C style for loops
which begin with an initializer, followed by a test condition,
followed by an increment action. For statements run the initializer
once before the loop is run, the test each on each iteration through
the loop before the body, and the increment on each iteration after
the body. If the loop is broken out of early (for example, by a goto),
the final increment will not be run. The syntax is as follows:
for init; test; increment
blockbody()
;;
The second form is the collection iteration form. This form allows
for iterating over a collection of values contained within something
which is iterable. Currently, only the built in sequences -- arrays
and slices -- can be iterated, however, there is work going towards
allowing user defined iterables.
for pat in expr
blockbody()
;;
The pattern applied in the for loop is a full match statement style
pattern match, and will filter any elements in the iteration
expression which do not match the value.
While loops are equivalent to for loops with empty initializers
and increments. They run the test on every iteration of the loop,
and exit only if it returns false.
6.5. Goto
label: ":" ident
goto: goto ident
6. GRAMMAR:
BUGS: