ref: 1391a257e3efe1a9c3c431a0ba40533b75928b17
dir: /lib/vimfiles/filetype.vim/
" Vim support file to detect file types
"
" Maintainer: Bram Moolenaar <Bram@vim.org>
" Last Change: 2007 May 10
" Listen very carefully, I will say this only once
if exists("did_load_filetypes")
finish
endif
let did_load_filetypes = 1
" Line continuation is used here, remove 'C' from 'cpoptions'
let s:cpo_save = &cpo
set cpo&vim
augroup filetypedetect
" Ignored extensions
au BufNewFile,BufRead ?\+.orig,?\+.bak,?\+.old,?\+.new,?\+.rpmsave,?\+.rpmnew
\ exe "doau filetypedetect BufRead " . expand("<afile>:r")
au BufNewFile,BufRead *~
\ let s:name = expand("<afile>") |
\ let s:short = substitute(s:name, '\~$', '', '') |
\ if s:name != s:short && s:short != "" |
\ exe "doau filetypedetect BufRead " . s:short |
\ endif |
\ unlet s:name |
\ unlet s:short
au BufNewFile,BufRead ?\+.in
\ if expand("<afile>:t") != "configure.in" |
\ exe "doau filetypedetect BufRead " . expand("<afile>:r") |
\ endif
" Pattern used to match file names which should not be inspected.
" Currently finds compressed files.
if !exists("g:ft_ignore_pat")
let g:ft_ignore_pat = '\.\(Z\|gz\|bz2\|zip\|tgz\)$'
endif
" Function used for patterns that end in a star: don't set the filetype if the
" file name matches ft_ignore_pat.
func! s:StarSetf(ft)
if expand("<amatch>") !~ g:ft_ignore_pat
exe 'setf ' . a:ft
endif
endfunc
" Abaqus or Trasys
au BufNewFile,BufRead *.inp call s:Check_inp()
func! s:Check_inp()
if getline(1) =~ '^\*'
setf abaqus
else
let n = 1
if line("$") > 500
let nmax = 500
else
let nmax = line("$")
endif
while n <= nmax
if getline(n) =~? "^header surface data"
setf trasys
break
endif
let n = n + 1
endwhile
endif
endfunc
" A-A-P recipe
au BufNewFile,BufRead *.aap setf aap
" A2ps printing utility
au BufNewFile,BufRead etc/a2ps.cfg,etc/a2ps/*.cfg,a2psrc,.a2psrc setf a2ps
" ABAB/4
au BufNewFile,BufRead *.abap setf abap
" ABC music notation
au BufNewFile,BufRead *.abc setf abc
" ABEL
au BufNewFile,BufRead *.abl setf abel
" AceDB
au BufNewFile,BufRead *.wrm setf acedb
" Ada (83, 9X, 95)
au BufNewFile,BufRead *.adb,*.ads,*.ada setf ada
if has("vms")
au BufNewFile,BufRead *.gpr,*.ada_m,*.adc setf ada
else
au BufNewFile,BufRead *.gpr setf ada
endif
" AHDL
au BufNewFile,BufRead *.tdf setf ahdl
" AMPL
au BufNewFile,BufRead *.run setf ampl
" Ant
au BufNewFile,BufRead build.xml setf ant
" Apache style config file
au BufNewFile,BufRead proftpd.conf* call s:StarSetf('apachestyle')
" Apache config file
au BufNewFile,BufRead .htaccess setf apache
au BufNewFile,BufRead httpd.conf*,srm.conf*,access.conf*,apache.conf*,apache2.conf*,/etc/apache2/*.conf* call s:StarSetf('apache')
" XA65 MOS6510 cross assembler
au BufNewFile,BufRead *.a65 setf a65
" Applix ELF
au BufNewFile,BufRead *.am
\ if expand("<afile>") !~? 'Makefile.am\>' | setf elf | endif
" ALSA configuration
au BufNewFile,BufRead ~/.asoundrc,/usr/share/alsa/alsa.conf,/etc/asound.conf setf alsaconf
" Arc Macro Language
au BufNewFile,BufRead *.aml setf aml
" Arch Inventory file
au BufNewFile,BufRead .arch-inventory,=tagging-method setf arch
" ART*Enterprise (formerly ART-IM)
au BufNewFile,BufRead *.art setf art
" ASN.1
au BufNewFile,BufRead *.asn,*.asn1 setf asn
" Active Server Pages (with Visual Basic Script)
au BufNewFile,BufRead *.asa
\ if exists("g:filetype_asa") |
\ exe "setf " . g:filetype_asa |
\ else |
\ setf aspvbs |
\ endif
" Active Server Pages (with Perl or Visual Basic Script)
au BufNewFile,BufRead *.asp
\ if exists("g:filetype_asp") |
\ exe "setf " . g:filetype_asp |
\ elseif getline(1) . getline(2) . getline(3) =~? "perlscript" |
\ setf aspperl |
\ else |
\ setf aspvbs |
\ endif
" Grub (must be before catch *.lst)
au BufNewFile,BufRead /boot/grub/menu.lst,/boot/grub/grub.conf,/etc/grub.conf setf grub
" Assembly (all kinds)
" *.lst is not pure assembly, it has two extra columns (address, byte codes)
au BufNewFile,BufRead *.asm,*.[sS],*.[aA],*.mac,*.lst call s:FTasm()
" This function checks for the kind of assembly that is wanted by the user, or
" can be detected from the first five lines of the file.
func! s:FTasm()
" make sure b:asmsyntax exists
if !exists("b:asmsyntax")
let b:asmsyntax = ""
endif
if b:asmsyntax == ""
call s:FTasmsyntax()
endif
" if b:asmsyntax still isn't set, default to asmsyntax or GNU
if b:asmsyntax == ""
if exists("g:asmsyntax")
let b:asmsyntax = g:asmsyntax
else
let b:asmsyntax = "asm"
endif
endif
exe "setf " . b:asmsyntax
endfunc
func! s:FTasmsyntax()
" see if file contains any asmsyntax=foo overrides. If so, change
" b:asmsyntax appropriately
let head = " ".getline(1)." ".getline(2)." ".getline(3)." ".getline(4).
\" ".getline(5)." "
if head =~ '\sasmsyntax=\S\+\s'
let b:asmsyntax = substitute(head, '.*\sasmsyntax=\(\S\+\)\s.*','\1', "")
elseif ((head =~? '\.title') || (head =~? '\.ident') || (head =~? '\.macro') || (head =~? '\.subtitle') || (head =~? '\.library'))
let b:asmsyntax = "vmasm"
endif
endfunc
" Macro (VAX)
au BufNewFile,BufRead *.mar setf vmasm
" Atlas
au BufNewFile,BufRead *.atl,*.as setf atlas
" Autoit v3
au BufNewFile,BufRead *.au3 setf autoit
" Autohotkey
au BufNewFile,BufRead *.ahk setf autohotkey
" Automake
au BufNewFile,BufRead [mM]akefile.am,GNUmakefile.am setf automake
" Autotest .at files are actually m4
au BufNewFile,BufRead *.at setf m4
" Avenue
au BufNewFile,BufRead *.ave setf ave
" Awk
au BufNewFile,BufRead *.awk setf awk
" B
au BufNewFile,BufRead *.mch,*.ref,*.imp setf b
" BASIC or Visual Basic
au BufNewFile,BufRead *.bas call s:FTVB("basic")
" Check if one of the first five lines contains "VB_Name". In that case it is
" probably a Visual Basic file. Otherwise it's assumed to be "alt" filetype.
func! s:FTVB(alt)
if getline(1).getline(2).getline(3).getline(4).getline(5) =~? 'VB_Name\|Begin VB\.\(Form\|MDIForm\|UserControl\)'
setf vb
else
exe "setf " . a:alt
endif
endfunc
" Visual Basic Script (close to Visual Basic)
au BufNewFile,BufRead *.vbs,*.dsm,*.ctl setf vb
" IBasic file (similar to QBasic)
au BufNewFile,BufRead *.iba,*.ibi setf ibasic
" FreeBasic file (similar to QBasic)
au BufNewFile,BufRead *.fb,*.bi setf freebasic
" Batch file for MSDOS.
au BufNewFile,BufRead *.bat,*.sys setf dosbatch
" *.cmd is close to a Batch file, but on OS/2 Rexx files also use *.cmd.
au BufNewFile,BufRead *.cmd
\ if getline(1) =~ '^/\*' | setf rexx | else | setf dosbatch | endif
" Batch file for 4DOS
au BufNewFile,BufRead *.btm call s:FTbtm()
func! s:FTbtm()
if exists("g:dosbatch_syntax_for_btm") && g:dosbatch_syntax_for_btm
setf dosbatch
else
setf btm
endif
endfunc
" BC calculator
au BufNewFile,BufRead *.bc setf bc
" BDF font
au BufNewFile,BufRead *.bdf setf bdf
" BibTeX bibliography database file
au BufNewFile,BufRead *.bib setf bib
" BibTeX Bibliography Style
au BufNewFile,BufRead *.bst setf bst
" BIND configuration
au BufNewFile,BufRead named.conf,rndc.conf setf named
" BIND zone
au BufNewFile,BufRead named.root setf bindzone
au BufNewFile,BufRead *.db call s:BindzoneCheck('')
func! s:BindzoneCheck(default)
if getline(1).getline(2).getline(3).getline(4) =~ '^; <<>> DiG [0-9.]\+ <<>>\|BIND.*named\|$ORIGIN\|$TTL\|IN\s\+SOA'
setf bindzone
elseif a:default != ''
exe 'setf ' . a:default
endif
endfunc
" Blank
au BufNewFile,BufRead *.bl setf blank
" C or lpc
au BufNewFile,BufRead *.c call s:FTlpc()
func! s:FTlpc()
if exists("g:lpc_syntax_for_c")
let lnum = 1
while lnum <= 12
if getline(lnum) =~# '^\(//\|inherit\|private\|protected\|nosave\|string\|object\|mapping\|mixed\)'
setf lpc
return
endif
let lnum = lnum + 1
endwhile
endif
setf c
endfunc
" Calendar
au BufNewFile,BufRead calendar setf calendar
au BufNewFile,BufRead */.calendar/*,
\*/share/calendar/*/calendar.*,*/share/calendar/calendar.*
\ call s:StarSetf('calendar')
" C#
au BufNewFile,BufRead *.cs setf cs
" Cdrdao TOC
au BufNewFile,BufRead *.toc setf cdrtoc
" Cfengine
au BufNewFile,BufRead cfengine.conf setf cfengine
" Comshare Dimension Definition Language
au BufNewFile,BufRead *.cdl setf cdl
" Conary Recipe
au BufNewFile,BufRead *.recipe setf conaryrecipe
" Controllable Regex Mutilator
au BufNewFile,BufRead *.crm setf crm
" Cyn++
au BufNewFile,BufRead *.cyn setf cynpp
" Cynlib
" .cc and .cpp files can be C++ or Cynlib.
au BufNewFile,BufRead *.cc
\ if exists("cynlib_syntax_for_cc")|setf cynlib|else|setf cpp|endif
au BufNewFile,BufRead *.cpp
\ if exists("cynlib_syntax_for_cpp")|setf cynlib|else|setf cpp|endif
" C++
if has("fname_case")
au BufNewFile,BufRead *.cxx,*.c++,*.C,*.H,*.hh,*.hxx,*.hpp,*.moc,*.tcc,*.inl setf cpp
else
au BufNewFile,BufRead *.cxx,*.c++,*.hh,*.hxx,*.hpp,*.moc,*.tcc,*.inl setf cpp
endif
" .h files can be C, Ch or C++, set c_syntax_for_h if you want C,
" ch_syntax_for_h if you want Ch.
au BufNewFile,BufRead *.h
\ if exists("c_syntax_for_h") | setf c |
\ elseif exists("ch_syntax_for_h") | setf ch |
\ else | setf cpp | endif
" Ch (CHscript)
au BufNewFile,BufRead *.chf setf ch
" TLH files are C++ headers generated by Visual C++'s #import from typelibs
au BufNewFile,BufRead *.tlh setf cpp
" Cascading Style Sheets
au BufNewFile,BufRead *.css setf css
" Century Term Command Scripts (*.cmd too)
au BufNewFile,BufRead *.con setf cterm
" Changelog
au BufNewFile,BufRead changelog.Debian,changelog.dch,NEWS.Debian,NEWS.dch
\ setf debchangelog
au BufNewFile,BufRead [cC]hange[lL]og
\ if getline(1) =~ '; urgency='
\| setf debchangelog
\| else
\| setf changelog
\| endif
au BufNewFile,BufRead NEWS
\ if getline(1) =~ '; urgency='
\| setf debchangelog
\| endif
" CHILL
au BufNewFile,BufRead *..ch setf chill
" Changes for WEB and CWEB or CHILL
au BufNewFile,BufRead *.ch call s:FTchange()
" This function checks if one of the first ten lines start with a '@'. In
" that case it is probably a change file.
" If the first line starts with # or ! it's probably a ch file.
" If a line has "main", "include", "//" ir "/*" it's probably ch.
" Otherwise CHILL is assumed.
func! s:FTchange()
let lnum = 1
while lnum <= 10
if getline(lnum)[0] == '@'
setf change
return
endif
if lnum == 1 && (getline(1)[0] == '#' || getline(1)[0] == '!')
setf ch
return
endif
if getline(lnum) =~ "MODULE"
setf chill
return
endif
if getline(lnum) =~ 'main\s*(\|#\s*include\|//'
setf ch
return
endif
let lnum = lnum + 1
endwhile
setf chill
endfunc
" ChordPro
au BufNewFile,BufRead *.chopro,*.crd,*.cho,*.crdpro,*.chordpro setf chordpro
" Clean
au BufNewFile,BufRead *.dcl,*.icl setf clean
" Clever
au BufNewFile,BufRead *.eni setf cl
" Clever or dtd
au BufNewFile,BufRead *.ent call s:FTent()
func! s:FTent()
" This function checks for valid cl syntax in the first five lines.
" Look for either an opening comment, '#', or a block start, '{".
" If not found, assume SGML.
let lnum = 1
while lnum < 6
let line = getline(lnum)
if line =~ '^\s*[#{]'
setf cl
return
elseif line !~ '^\s*$'
" Not a blank line, not a comment, and not a block start,
" so doesn't look like valid cl code.
break
endif
let lnum = lnum + 1
endw
setf dtd
endfunc
" Clipper (or FoxPro; could also be eviews)
au BufNewFile,BufRead *.prg
\ if exists("g:filetype_prg") |
\ exe "setf " . g:filetype_prg |
\ else |
\ setf clipper |
\ endif
" Cmake
au BufNewFile,BufRead CMakeLists.txt,*.cmake,*.cmake.in setf cmake
" Cmusrc
au BufNewFile,BufRead ~/.cmus/{autosave,rc,command-history,*.theme} setf cmusrc
au BufNewFile,BufRead */cmus/{rc,*.theme} setf cmusrc
" Cobol
au BufNewFile,BufRead *.cbl,*.cob,*.lib setf cobol
" cobol or zope form controller python script? (heuristic)
au BufNewFile,BufRead *.cpy
\ if getline(1) =~ '^##' |
\ setf python |
\ else |
\ setf cobol |
\ endif
" Cold Fusion
au BufNewFile,BufRead *.cfm,*.cfi,*.cfc setf cf
" Configure scripts
au BufNewFile,BufRead configure.in,configure.ac setf config
" WildPackets EtherPeek Decoder
au BufNewFile,BufRead *.dcd setf dcd
" Enlightenment configuration files
au BufNewFile,BufRead *enlightenment/*.cfg setf c
" Eterm
au BufNewFile,BufRead *Eterm/*.cfg setf eterm
" Lynx config files
au BufNewFile,BufRead lynx.cfg setf lynx
" Quake
au BufNewFile,BufRead *baseq[2-3]/*.cfg,*id1/*.cfg setf quake
au BufNewFile,BufRead *quake[1-3]/*.cfg setf quake
" Quake C
au BufNewFile,BufRead *.qc setf c
" Configure files
au BufNewFile,BufRead *.cfg setf cfg
" Communicating Sequential Processes
au BufNewFile,BufRead *.csp,*.fdr setf csp
" CUPL logic description and simulation
au BufNewFile,BufRead *.pld setf cupl
au BufNewFile,BufRead *.si setf cuplsim
" Debian Control
au BufNewFile,BufRead */debian/control setf debcontrol
" Debian Sources.list
au BufNewFile,BufRead /etc/apt/sources.list setf debsources
" ROCKLinux package description
au BufNewFile,BufRead *.desc setf desc
" the D language
au BufNewFile,BufRead *.d setf d
" Desktop files
au BufNewFile,BufRead *.desktop,.directory setf desktop
" Dict config
au BufNewFile,BufRead dict.conf,.dictrc setf dictconf
" Dictd config
au BufNewFile,BufRead dictd.conf setf dictdconf
" Diff files
au BufNewFile,BufRead *.diff,*.rej,*.patch setf diff
" Dircolors
au BufNewFile,BufRead .dir_colors,/etc/DIR_COLORS setf dircolors
" Diva (with Skill) or InstallShield
au BufNewFile,BufRead *.rul
\ if getline(1).getline(2).getline(3).getline(4).getline(5).getline(6) =~? 'InstallShield' |
\ setf ishd |
\ else |
\ setf diva |
\ endif
" DCL (Digital Command Language - vms) or DNS zone file
au BufNewFile,BufRead *.com call s:BindzoneCheck('dcl')
" DOT
au BufNewFile,BufRead *.dot setf dot
" Dylan - lid files
au BufNewFile,BufRead *.lid setf dylanlid
" Dylan - intr files (melange)
au BufNewFile,BufRead *.intr setf dylanintr
" Dylan
au BufNewFile,BufRead *.dylan setf dylan
" Microsoft Module Definition
au BufNewFile,BufRead *.def setf def
" Dracula
au BufNewFile,BufRead *.drac,*.drc,*lvs,*lpe setf dracula
" dsl
au BufNewFile,BufRead *.dsl setf dsl
" DTD (Document Type Definition for XML)
au BufNewFile,BufRead *.dtd setf dtd
" EDIF (*.edf,*.edif,*.edn,*.edo)
au BufNewFile,BufRead *.ed\(f\|if\|n\|o\) setf edif
" Embedix Component Description
au BufNewFile,BufRead *.ecd setf ecd
" Eiffel or Specman
au BufNewFile,BufRead *.e,*.E call s:FTe()
" Elinks configuration
au BufNewFile,BufRead */etc/elinks.conf,*/.elinks/elinks.conf setf elinks
func! s:FTe()
let n = 1
while n < 100 && n < line("$")
if getline(n) =~ "^\\s*\\(<'\\|'>\\)\\s*$"
setf specman
return
endif
let n = n + 1
endwhile
setf eiffel
endfunc
" ERicsson LANGuage
au BufNewFile,BufRead *.erl setf erlang
" Elm Filter Rules file
au BufNewFile,BufRead filter-rules setf elmfilt
" ESMTP rc file
au BufNewFile,BufRead *esmtprc setf esmtprc
" ESQL-C
au BufNewFile,BufRead *.ec,*.EC setf esqlc
" Esterel
au BufNewFile,BufRead *.strl setf esterel
" Essbase script
au BufNewFile,BufRead *.csc setf csc
" Exim
au BufNewFile,BufRead exim.conf setf exim
" Expect
au BufNewFile,BufRead *.exp setf expect
" Exports
au BufNewFile,BufRead exports setf exports
" Factor
au BufNewFile,BufRead *.factor setf factor
" Fetchmail RC file
au BufNewFile,BufRead .fetchmailrc setf fetchmail
" FlexWiki
au BufNewFile,BufRead *.wiki setf flexwiki
" Focus Executable
au BufNewFile,BufRead *.fex,*.focexec setf focexec
" Focus Master file (but not for auto.master)
au BufNewFile,BufRead auto.master setf conf
au BufNewFile,BufRead *.mas,*.master setf master
" Forth
au BufNewFile,BufRead *.fs,*.ft setf forth
" Fortran
if has("fname_case")
au BufNewFile,BufRead *.F,*.FOR,*.FPP,*.FTN,*.F77,*.F90,*.F95 setf fortran
endif
au BufNewFile,BufRead *.f,*.for,*.fpp,*.ftn,*.f77,*.f90,*.f95 setf fortran
" FStab
au BufNewFile,BufRead fstab,mtab setf fstab
" GDB command files
au BufNewFile,BufRead .gdbinit setf gdb
" GDMO
au BufNewFile,BufRead *.mo,*.gdmo setf gdmo
" Gedcom
au BufNewFile,BufRead *.ged setf gedcom
" Gkrellmrc
au BufNewFile,BufRead gkrellmrc,gkrellmrc_? setf gkrellmrc
" GP scripts (2.0 and onward)
au BufNewFile,BufRead *.gp,.gprc setf gp
" GPG
au BufNewFile,BufRead */.gnupg/options setf gpg
au BufNewFile,BufRead */.gnupg/gpg.conf setf gpg
au BufNewFile,BufRead /usr/**/gnupg/options.skel setf gpg
" Gnuplot scripts
au BufNewFile,BufRead *.gpi setf gnuplot
" GrADS scripts
au BufNewFile,BufRead *.gs setf grads
" Gretl
au BufNewFile,BufRead *.gretl setf gretl
" Groovy
au BufNewFile,BufRead *.groovy setf groovy
" GNU Server Pages
au BufNewFile,BufRead *.gsp setf gsp
" Group file
au BufNewFile,BufRead /etc/group setf group
" GTK RC
au BufNewFile,BufRead .gtkrc,gtkrc setf gtkrc
" Hamster Classic | Playground files
au BufNewFile,BufRead *.hsc,*.hsm setf hamster
" Haskell
au BufNewFile,BufRead *.hs setf haskell
au BufNewFile,BufRead *.lhs setf lhaskell
au BufNewFile,BufRead *.chs setf chaskell
" Hercules
au BufNewFile,BufRead *.vc,*.ev,*.rs,*.sum,*.errsum setf hercules
" HEX (Intel)
au BufNewFile,BufRead *.hex,*.h32 setf hex
" Tilde (must be before HTML)
au BufNewFile,BufRead *.t.html setf tilde
" HTML (.shtml and .stm for server side)
au BufNewFile,BufRead *.html,*.htm,*.shtml,*.stm call s:FThtml()
" Distinguish between HTML, XHTML and Django
func! s:FThtml()
let n = 1
while n < 10 && n < line("$")
if getline(n) =~ '\<DTD\s\+XHTML\s'
setf xhtml
return
endif
if getline(n) =~ '{%\s*\(extends\|block\)\>'
setf htmldjango
return
endif
let n = n + 1
endwhile
setf html
endfunc
" HTML with Ruby - eRuby
au BufNewFile,BufRead *.erb,*.rhtml setf eruby
" HTML with M4
au BufNewFile,BufRead *.html.m4 setf htmlm4
" HTML Cheetah template
au BufNewFile,BufRead *.tmpl setf htmlcheetah
" Hyper Builder
au BufNewFile,BufRead *.hb setf hb
" Icon
au BufNewFile,BufRead *.icn setf icon
" IDL (Interface Description Language)
au BufNewFile,BufRead *.idl call s:FTidl()
" Distinguish between standard IDL and MS-IDL
func! s:FTidl()
let n = 1
while n < 50 && n < line("$")
if getline(n) =~ '^\s*import\s\+"\(unknwn\|objidl\)\.idl"'
setf msidl
return
endif
let n = n + 1
endwhile
setf idl
endfunc
" Microsoft IDL (Interface Description Language) Also *.idl
" MOF = WMI (Windows Management Instrumentation) Managed Object Format
au BufNewFile,BufRead *.odl,*.mof setf msidl
" Icewm menu
au BufNewFile,BufRead */.icewm/menu setf icemenu
" Indent profile (must come before IDL *.pro!)
au BufNewFile,BufRead .indent.pro setf indent
au BufNewFile,BufRead indent.pro call s:ProtoCheck('indent')
" IDL (Interactive Data Language)
au BufNewFile,BufRead *.pro call s:ProtoCheck('idlang')
" Distinguish between "default" and Cproto prototype file. */
func! s:ProtoCheck(default)
" Cproto files have a comment in the first line and a function prototype in
" the second line, it always ends in ";". Indent files may also have
" comments, thus we can't match comments to see the difference.
if getline(2) =~ ';$'
setf cpp
else
exe 'setf ' . a:default
endif
endfunc
" Indent RC
au BufNewFile,BufRead indentrc setf indentrc
" Inform
au BufNewFile,BufRead *.inf,*.INF setf inform
" Initng
au BufNewFile,BufRead /etc/initng/**/*.i,*.ii setf initng
" Ipfilter
au BufNewFile,BufRead ipf.conf,ipf6.conf,ipf.rules setf ipfilter
" Informix 4GL (source - canonical, include file, I4GL+M4 preproc.)
au BufNewFile,BufRead *.4gl,*.4gh,*.m4gl setf fgl
" .INI file for MSDOS
au BufNewFile,BufRead *.ini setf dosini
" SysV Inittab
au BufNewFile,BufRead inittab setf inittab
" Inno Setup
au BufNewFile,BufRead *.iss setf iss
" JAL
au BufNewFile,BufRead *.jal,*.JAL setf jal
" Jam
au BufNewFile,BufRead *.jpl,*.jpr setf jam
" Java
au BufNewFile,BufRead *.java,*.jav setf java
" JavaCC
au BufNewFile,BufRead *.jj,*.jjt setf javacc
" JavaScript, ECMAScript
au BufNewFile,BufRead *.js,*.javascript,*.es setf javascript
" Java Server Pages
au BufNewFile,BufRead *.jsp setf jsp
" Java Properties resource file (note: doesn't catch font.properties.pl)
au BufNewFile,BufRead *.properties,*.properties_??,*.properties_??_?? setf jproperties
au BufNewFile,BufRead *.properties_??_??_* call s:StarSetf('jproperties')
" Jess
au BufNewFile,BufRead *.clp setf jess
" Jgraph
au BufNewFile,BufRead *.jgr setf jgraph
" Kixtart
au BufNewFile,BufRead *.kix setf kix
" Kimwitu[++]
au BufNewFile,BufRead *.k setf kwt
" KDE script
au BufNewFile,BufRead *.ks setf kscript
" Kconfig
au BufNewFile,BufRead Kconfig,Kconfig.debug setf kconfig
" Lace (ISE)
au BufNewFile,BufRead *.ace,*.ACE setf lace
" Latte
au BufNewFile,BufRead *.latte,*.lte setf latte
" Limits
au BufNewFile,BufRead /etc/limits setf limits
" LambdaProlog (*.mod too, see Modsim)
au BufNewFile,BufRead *.sig setf lprolog
" LDAP LDIF
au BufNewFile,BufRead *.ldif setf ldif
" Ld loader
au BufNewFile,BufRead *.ld setf ld
" Lex
au BufNewFile,BufRead *.lex,*.l setf lex
" Libao
au BufNewFile,BufRead /etc/libao.conf,*/.libao setf libao
" Libsensors
au BufNewFile,BufRead /etc/sensors.conf setf sensors
" LFTP
au BufNewFile,BufRead lftp.conf,.lftprc,*lftp/rc setf lftp
" Lifelines (or Lex for C++!)
au BufNewFile,BufRead *.ll setf lifelines
" Lilo: Linux loader
au BufNewFile,BufRead lilo.conf* call s:StarSetf('lilo')
" Lisp (*.el = ELisp, *.cl = Common Lisp, *.jl = librep Lisp)
if has("fname_case")
au BufNewFile,BufRead *.lsp,*.lisp,*.el,*.cl,*.jl,*.L,.emacs,.sawfishrc setf lisp
else
au BufNewFile,BufRead *.lsp,*.lisp,*.el,*.cl,*.jl,.emacs,.sawfishrc setf lisp
endif
" SBCL implementation of Common Lisp
au BufNewFile,BufRead sbclrc,.sbclrc setf lisp
" Lite
au BufNewFile,BufRead *.lite,*.lt setf lite
" LiteStep RC files
au BufNewFile,BufRead */LiteStep/*/*.rc setf litestep
" Login access
au BufNewFile,BufRead /etc/login.access setf loginaccess
" Login defs
au BufNewFile,BufRead /etc/login.defs setf logindefs
" Logtalk
au BufNewFile,BufRead *.lgt setf logtalk
" LOTOS
au BufNewFile,BufRead *.lot,*.lotos setf lotos
" Lout (also: *.lt)
au BufNewFile,BufRead *.lou,*.lout setf lout
" Lua
au BufNewFile,BufRead *.lua setf lua
" Lynx style file (or LotusScript!)
au BufNewFile,BufRead *.lss setf lss
" M4
au BufNewFile,BufRead *.m4
\ if expand("<afile>") !~? 'html.m4$\|fvwm2rc' | setf m4 | endif
" MaGic Point
au BufNewFile,BufRead *.mgp setf mgp
" Mail (for Elm, trn, mutt, muttng, rn, slrn)
au BufNewFile,BufRead snd.\d\+,.letter,.letter.\d\+,.followup,.article,.article.\d\+,pico.\d\+,mutt{ng,}-*-\w\+,mutt[[:alnum:]._-]\{6\},ae\d\+.txt,/tmp/SLRN[0-9A-Z.]\+,*.eml setf mail
" Mail aliases
au BufNewFile,BufRead /etc/mail/aliases,/etc/aliases setf mailaliases
" Mailcap configuration file
au BufNewFile,BufRead .mailcap,mailcap setf mailcap
" Makefile
au BufNewFile,BufRead *[mM]akefile,*.mk,*.mak,*.dsp setf make
" MakeIndex
au BufNewFile,BufRead *.ist,*.mst setf ist
" Manpage
au BufNewFile,BufRead *.man setf man
" Man config
au BufNewFile,BufRead /etc/man.conf,man.config setf manconf
" Maple V
au BufNewFile,BufRead *.mv,*.mpl,*.mws setf maple
" Mason
au BufNewFile,BufRead *.mason,*.mhtml setf mason
" Matlab or Objective C
au BufNewFile,BufRead *.m call s:FTm()
func! s:FTm()
let n = 1
while n < 10
let line = getline(n)
if line =~ '^\s*\(#\s*\(include\|import\)\>\|/\*\)'
setf objc
return
endif
if line =~ '^\s*%'
setf matlab
return
endif
if line =~ '^\s*(\*'
setf mma
return
endif
let n = n + 1
endwhile
if exists("g:filetype_m")
exe "setf " . g:filetype_m
else
setf matlab
endif
endfunc
" Maya Extension Language
au BufNewFile,BufRead *.mel setf mel
" Messages
au BufNewFile,BufRead /var/log/messages,/var/log/messages.*[0-9] setf messages
" Metafont
au BufNewFile,BufRead *.mf setf mf
" MetaPost
au BufNewFile,BufRead *.mp setf mp
" MGL
au BufNewFile,BufRead *.mgl setf mgl
" MMIX or VMS makefile
au BufNewFile,BufRead *.mms call s:FTmms()
func! s:FTmms()
let n = 1
while n < 10
let line = getline(n)
if line =~ '^\s*\(%\|//\)' || line =~ '^\*'
setf mmix
return
endif
if line =~ '^\s*#'
setf make
return
endif
let n = n + 1
endwhile
setf mmix
endfunc
" Modsim III (or LambdaProlog)
au BufNewFile,BufRead *.mod
\ if getline(1) =~ '\<module\>' |
\ setf lprolog |
\ else |
\ setf modsim3 |
\ endif
" Modula 2
au BufNewFile,BufRead *.m2,*.DEF,*.MOD,*.md,*.mi setf modula2
" Modula 3 (.m3, .i3, .mg, .ig)
au BufNewFile,BufRead *.[mi][3g] setf modula3
" Monk
au BufNewFile,BufRead *.isc,*.monk,*.ssc,*.tsc setf monk
" MOO
au BufNewFile,BufRead *.moo setf moo
" Modconf
au BufNewFile,BufRead /etc/modules.conf,/etc/conf.modules setf modconf
au BufNewFile,BufRead /etc/modutils/*
\ if executable(expand("<afile>")) != 1
\| call s:StarSetf('modconf')
\|endif
" Mplayer config
au BufNewFile,BufRead mplayer.conf,*/.mplayer/config setf mplayerconf
" Moterola S record
au BufNewFile,BufRead *.s19,*.s28,*.s37 setf srec
" Mrxvtrc
au BufNewFile,BufRead mrxvtrc,.mrxvtrc setf mrxvtrc
" Msql
au BufNewFile,BufRead *.msql setf msql
" Mysql
au BufNewFile,BufRead *.mysql setf mysql
" M$ Resource files
au BufNewFile,BufRead *.rc setf rc
" MuPAD source
au BufRead,BufNewFile *.mu setf mupad
" Mush
au BufNewFile,BufRead *.mush setf mush
" Mutt setup file (also for Muttng)
au BufNewFile,BufRead Mutt{ng,}rc setf muttrc
au BufNewFile,BufRead .mutt{ng,}rc*,*/.mutt{ng,}/mutt{ng,}rc* call s:StarSetf('muttrc')
" Nano
au BufNewFile,BufRead /etc/nanorc,.nanorc setf nanorc
" Nastran input/DMAP
"au BufNewFile,BufRead *.dat setf nastran
" Natural
au BufNewFile,BufRead *.NS[ACGLMNPS] setf natural
" Netrc
au BufNewFile,BufRead .netrc setf netrc
" Novell netware batch files
au BufNewFile,BufRead *.ncf setf ncf
" Nroff/Troff (*.ms and *.t are checked below)
au BufNewFile,BufRead *.me
\ if expand("<afile>") != "read.me" && expand("<afile>") != "click.me" |
\ setf nroff |
\ endif
au BufNewFile,BufRead *.tr,*.nr,*.roff,*.tmac,*.mom setf nroff
au BufNewFile,BufRead *.[1-9] call s:FTnroff()
" This function checks if one of the first five lines start with a dot. In
" that case it is probably an nroff file: 'filetype' is set and 1 is returned.
func! s:FTnroff()
if getline(1)[0] . getline(2)[0] . getline(3)[0] . getline(4)[0] . getline(5)[0] =~ '\.'
setf nroff
return 1
endif
return 0
endfunc
" Nroff or Objective C++
au BufNewFile,BufRead *.mm call s:FTmm()
func! s:FTmm()
let n = 1
while n < 10
let line = getline(n)
if line =~ '^\s*\(#\s*\(include\|import\)\>\|/\*\)'
setf objcpp
return
endif
let n = n + 1
endwhile
setf nroff
endfunc
" Not Quite C
au BufNewFile,BufRead *.nqc setf nqc
" NSIS
au BufNewFile,BufRead *.nsi setf nsis
" OCAML
au BufNewFile,BufRead *.ml,*.mli,*.mll,*.mly setf ocaml
" Occam
au BufNewFile,BufRead *.occ setf occam
" Omnimark
au BufNewFile,BufRead *.xom,*.xin setf omnimark
" OpenROAD
au BufNewFile,BufRead *.or setf openroad
" OPL
au BufNewFile,BufRead *.[Oo][Pp][Ll] setf opl
" Oracle config file
au BufNewFile,BufRead *.ora setf ora
" Packet filter conf
au BufNewFile,BufRead pf.conf setf pf
" Pam conf
au BufNewFile,BufRead /etc/pam.conf setf pamconf
" PApp
au BufNewFile,BufRead *.papp,*.pxml,*.pxsl setf papp
" Password file
au BufNewFile,BufRead /etc/passwd,/etc/shadow,/etc/shadow- setf passwd
" Pascal (also *.p)
au BufNewFile,BufRead *.pas setf pascal
" Delphi project file
au BufNewFile,BufRead *.dpr setf pascal
" Perl
if has("fname_case")
au BufNewFile,BufRead *.pl,*.PL call s:FTpl()
else
au BufNewFile,BufRead *.pl call s:FTpl()
endif
au BufNewFile,BufRead *.plx setf perl
func! s:FTpl()
if exists("g:filetype_pl")
exe "setf " . g:filetype_pl
else
" recognize Prolog by specific text in the first non-empty line
" require a blank after the '%' because Perl uses "%list" and "%translate"
let l = getline(nextnonblank(1))
if l =~ '\<prolog\>' || l =~ '^\s*\(%\+\(\s\|$\)\|/\*\)' || l =~ ':-'
setf prolog
else
setf perl
endif
endif
endfunc
" Perl, XPM or XPM2
au BufNewFile,BufRead *.pm
\ if getline(1) =~ "XPM2" |
\ setf xpm2 |
\ elseif getline(1) =~ "XPM" |
\ setf xpm |
\ else |
\ setf perl |
\ endif
" Perl POD
au BufNewFile,BufRead *.pod setf pod
" Php, php3, php4, etc.
au BufNewFile,BufRead *.php,*.php\d setf php
" Phtml
au BufNewFile,BufRead *.phtml setf phtml
" Pike
au BufNewFile,BufRead *.pike,*.lpc,*.ulpc,*.pmod setf pike
" Pinfo config
au BufNewFile,BufRead */etc/pinforc,*/.pinforc setf pinfo
" Palm Resource compiler
au BufNewFile,BufRead *.rcp setf pilrc
" Pine config
au BufNewFile,BufRead .pinerc,pinerc,.pinercex,pinercex setf pine
" PL/M (also: *.inp)
au BufNewFile,BufRead *.plm,*.p36,*.pac setf plm
" PL/SQL
au BufNewFile,BufRead *.pls,*.plsql setf plsql
" PLP
au BufNewFile,BufRead *.plp setf plp
" PO and PO template (GNU gettext)
au BufNewFile,BufRead *.po,*.pot setf po
" Postfix main config
au BufNewFile,BufRead main.cf setf pfmain
" PostScript (+ font files, encapsulated PostScript, Adobe Illustrator)
au BufNewFile,BufRead *.ps,*.pfa,*.afm,*.eps,*.epsf,*.epsi,*.ai setf postscr
" PostScript Printer Description
au BufNewFile,BufRead *.ppd setf ppd
" Povray
au BufNewFile,BufRead *.pov setf pov
" Povray configuration
au BufNewFile,BufRead .povrayrc setf povini
" Povray, PHP or assembly
au BufNewFile,BufRead *.inc call s:FTinc()
func! s:FTinc()
if exists("g:filetype_inc")
exe "setf " . g:filetype_inc
else
let lines = getline(1).getline(2).getline(3)
if lines =~? "perlscript"
setf aspperl
elseif lines =~ "<%"
setf aspvbs
elseif lines =~ "<?"
setf php
else
call s:FTasmsyntax()
if exists("b:asmsyntax")
exe "setf " . b:asmsyntax
else
setf pov
endif
endif
endif
endfunc
" Printcap and Termcap
au BufNewFile,BufRead *printcap
\ let b:ptcap_type = "print" | setf ptcap
au BufNewFile,BufRead *termcap
\ let b:ptcap_type = "term" | setf ptcap
" PCCTS / ANTRL
"au BufNewFile,BufRead *.g setf antrl
au BufNewFile,BufRead *.g setf pccts
" PPWizard
au BufNewFile,BufRead *.it,*.ih setf ppwiz
" Oracle Pro*C/C++
au BufNewFile,BufRead .pc setf proc
" Privoxy actions file
au BufNewFile,BufRead *.action setf privoxy
" Procmail
au BufNewFile,BufRead .procmail,.procmailrc setf procmail
" Progress or CWEB
au BufNewFile,BufRead *.w call s:FTprogress_cweb()
func! s:FTprogress_cweb()
if exists("g:filetype_w")
exe "setf " . g:filetype_w
return
endif
if getline(1) =~ '&ANALYZE' || getline(3) =~ '&GLOBAL-DEFINE'
setf progress
else
setf cweb
endif
endfunc
" Progress or assembly
au BufNewFile,BufRead *.i call s:FTprogress_asm()
func! s:FTprogress_asm()
if exists("g:filetype_i")
exe "setf " . g:filetype_i
return
endif
" This function checks for an assembly comment the first ten lines.
" If not found, assume Progress.
let lnum = 1
while lnum <= 10 && lnum < line('$')
let line = getline(lnum)
if line =~ '^\s*;' || line =~ '^\*'
call s:FTasm()
return
elseif line !~ '^\s*$' || line =~ '^/\*'
" Not an empty line: Doesn't look like valid assembly code.
" Or it looks like a Progress /* comment
break
endif
let lnum = lnum + 1
endw
setf progress
endfunc
" Progress or Pascal
au BufNewFile,BufRead *.p call s:FTprogress_pascal()
func! s:FTprogress_pascal()
if exists("g:filetype_p")
exe "setf " . g:filetype_p
return
endif
" This function checks for valid Pascal syntax in the first ten lines.
" Look for either an opening comment or a program start.
" If not found, assume Progress.
let lnum = 1
while lnum <= 10 && lnum < line('$')
let line = getline(lnum)
if line =~ '^\s*\(program\|unit\|procedure\|function\|const\|type\|var\)\>'
\ || line =~ '^\s*{' || line =~ '^\s*(\*'
setf pascal
return
elseif line !~ '^\s*$' || line =~ '^/\*'
" Not an empty line: Doesn't look like valid Pascal code.
" Or it looks like a Progress /* comment
break
endif
let lnum = lnum + 1
endw
setf progress
endfunc
" Software Distributor Product Specification File (POSIX 1387.2-1995)
au BufNewFile,BufRead *.psf setf psf
au BufNewFile,BufRead INDEX,INFO
\ if getline(1) =~ '^\s*\(distribution\|installed_software\|root\|bundle\|product\)\s*$' |
\ setf psf |
\ endif
" Prolog
au BufNewFile,BufRead *.pdb setf prolog
" Protocols
au BufNewFile,BufRead /etc/protocols setf protocols
" Pyrex
au BufNewFile,BufRead *.pyx,*.pxd setf pyrex
" Python
au BufNewFile,BufRead *.py,*.pyw setf python
" Radiance
au BufNewFile,BufRead *.rad,*.mat setf radiance
" Ratpoison config/command files
au BufNewFile,BufRead .ratpoisonrc,ratpoisonrc setf ratpoison
" RCS file
au BufNewFile,BufRead *\,v setf rcs
" Readline
au BufNewFile,BufRead .inputrc,inputrc setf readline
" Registry for MS-Windows
au BufNewFile,BufRead *.reg
\ if getline(1) =~? '^REGEDIT[0-9]*\s*$\|^Windows Registry Editor Version \d*\.\d*\s*$' | setf registry | endif
" Renderman Interface Bytestream
au BufNewFile,BufRead *.rib setf rib
" Rexx
au BufNewFile,BufRead *.rexx,*.rex setf rexx
" R (Splus)
if has("fname_case")
au BufNewFile,BufRead *.s,*.S setf r
else
au BufNewFile,BufRead *.s setf r
endif
" R Help file
if has("fname_case")
au BufNewFile,BufRead *.rd,*.Rd setf rhelp
else
au BufNewFile,BufRead *.rd setf rhelp
endif
" R noweb file
if has("fname_case")
au BufNewFile,BufRead *.Rnw,*.rnw,*.Snw,*.snw setf rnoweb
else
au BufNewFile,BufRead *.rnw,*.snw setf rnoweb
endif
" Rexx, Rebol or R
au BufNewFile,BufRead *.r,*.R call s:FTr()
func! s:FTr()
let max = line("$") > 50 ? 50 : line("$")
for n in range(1, max)
" Rebol is easy to recognize, check for that first
if getline(n) =~ '\<REBOL\>'
setf rebol
return
endif
endfor
for n in range(1, max)
" R has # comments
if getline(n) =~ '^\s*#'
setf r
return
endif
" Rexx has /* comments */
if getline(n) =~ '^\s*/\*'
setf rexx
return
endif
endfor
" Nothing recognized, assume Rexx
setf rexx
endfunc
" Remind
au BufNewFile,BufRead .reminders* call s:StarSetf('remind')
" Resolv.conf
au BufNewFile,BufRead resolv.conf setf resolv
" Relax NG Compact
au BufNewFile,BufRead *.rnc setf rnc
" RPL/2
au BufNewFile,BufRead *.rpl setf rpl
" Robots.txt
au BufNewFile,BufRead robots.txt setf robots
" Rpcgen
au BufNewFile,BufRead *.x setf rpcgen
" reStructuredText Documentation Format
au BufNewFile,BufRead *.rst setf rst
" RTF
au BufNewFile,BufRead *.rtf setf rtf
" Ruby
au BufNewFile,BufRead *.rb,*.rbw,*.gem,*.gemspec setf ruby
" Ruby on Rails
au BufNewFile,BufRead *.builder,*.rxml,*.rjs setf ruby
" Rantfile and Rakefile is like Ruby
au BufNewFile,BufRead [rR]antfile,*.rant,[rR]akefile,*.rake setf ruby
" S-lang (or shader language!)
au BufNewFile,BufRead *.sl setf slang
" Samba config
au BufNewFile,BufRead smb.conf setf samba
" SAS script
au BufNewFile,BufRead *.sas setf sas
" Sather
au BufNewFile,BufRead *.sa setf sather
" Scilab
au BufNewFile,BufRead *.sci,*.sce setf scilab
" SD: Streaming Descriptors
au BufNewFile,BufRead *.sd setf sd
" SDL
au BufNewFile,BufRead *.sdl,*.pr setf sdl
" sed
au BufNewFile,BufRead *.sed setf sed
" Sieve (RFC 3028)
au BufNewFile,BufRead *.siv setf sieve
" Sendmail
au BufNewFile,BufRead sendmail.cf setf sm
" Sendmail .mc files are actually m4
au BufNewFile,BufRead *.mc setf m4
" Services
au BufNewFile,BufRead /etc/services setf services
" Service Location config
au BufNewFile,BufRead /etc/slp.conf setf slpconf
" Service Location registration
au BufNewFile,BufRead /etc/slp.reg setf slpreg
" Service Location SPI
au BufNewFile,BufRead /etc/slp.spi setf slpspi
" Setserial config
au BufNewFile,BufRead /etc/serial.conf setf setserial
" SGML
au BufNewFile,BufRead *.sgm,*.sgml
\ if getline(1).getline(2).getline(3).getline(4).getline(5) =~? 'linuxdoc' |
\ setf sgmllnx |
\ elseif getline(1) =~ '<!DOCTYPE.*DocBook' || getline(2) =~ '<!DOCTYPE.*DocBook' |
\ let b:docbk_type="sgml" |
\ setf docbk |
\ else |
\ setf sgml |
\ endif
" SGMLDECL
au BufNewFile,BufRead *.decl,*.dcl,*.dec
\ if getline(1).getline(2).getline(3) =~? '^<!SGML' |
\ setf sgmldecl |
\ endif
" SGML catalog file
au BufNewFile,BufRead catalog setf catalog
au BufNewFile,BufRead sgml.catalog* call s:StarSetf('catalog')
" Shell scripts (sh, ksh, bash, bash2, csh); Allow .profile_foo etc.
" Gentoo ebuilds are actually bash scripts
au BufNewFile,BufRead .bashrc*,bashrc,bash.bashrc,.bash_profile*,.bash_logout*,*.bash,*.ebuild call SetFileTypeSH("bash")
au BufNewFile,BufRead .kshrc*,*.ksh call SetFileTypeSH("ksh")
au BufNewFile,BufRead /etc/profile,.profile*,*.sh,*.env call SetFileTypeSH(getline(1))
" Also called from scripts.vim.
func! SetFileTypeSH(name)
if expand("<amatch>") =~ g:ft_ignore_pat
return
endif
if a:name =~ '\<ksh\>'
let b:is_kornshell = 1
if exists("b:is_bash")
unlet b:is_bash
endif
if exists("b:is_sh")
unlet b:is_sh
endif
elseif exists("g:bash_is_sh") || a:name =~ '\<bash\>' || a:name =~ '\<bash2\>'
let b:is_bash = 1
if exists("b:is_kornshell")
unlet b:is_kornshell
endif
if exists("b:is_sh")
unlet b:is_sh
endif
elseif a:name =~ '\<sh\>'
let b:is_sh = 1
if exists("b:is_kornshell")
unlet b:is_kornshell
endif
if exists("b:is_bash")
unlet b:is_bash
endif
endif
call SetFileTypeShell("sh")
endfunc
" For shell-like file types, check for an "exec" command hidden in a comment,
" as used for Tcl.
" Also called from scripts.vim, thus can't be local to this script.
func! SetFileTypeShell(name)
if expand("<amatch>") =~ g:ft_ignore_pat
return
endif
let l = 2
while l < 20 && l < line("$") && getline(l) =~ '^\s*\(#\|$\)'
" Skip empty and comment lines.
let l = l + 1
endwhile
if l < line("$") && getline(l) =~ '\s*exec\s' && getline(l - 1) =~ '^\s*#.*\\$'
" Found an "exec" line after a comment with continuation
let n = substitute(getline(l),'\s*exec\s\+\([^ ]*/\)\=', '', '')
if n =~ '\<tclsh\|\<wish'
setf tcl
return
endif
endif
exe "setf " . a:name
endfunc
" tcsh scripts
au BufNewFile,BufRead .tcshrc*,*.tcsh,tcsh.tcshrc,tcsh.login call SetFileTypeShell("tcsh")
" csh scripts, but might also be tcsh scripts (on some systems csh is tcsh)
au BufNewFile,BufRead .login*,.cshrc*,csh.cshrc,csh.login,csh.logout,*.csh,.alias call s:CSH()
func! s:CSH()
if exists("g:filetype_csh")
call SetFileTypeShell(g:filetype_csh)
elseif &shell =~ "tcsh"
call SetFileTypeShell("tcsh")
else
call SetFileTypeShell("csh")
endif
endfunc
" Z-Shell script
au BufNewFile,BufRead .zprofile,/etc/zprofile,.zfbfmarks setf zsh
au BufNewFile,BufRead .zsh*,.zlog*,.zcompdump* call s:StarSetf('zsh')
" Scheme
au BufNewFile,BufRead *.scm,*.ss setf scheme
" Screen RC
au BufNewFile,BufRead .screenrc,screenrc setf screen
" Simula
au BufNewFile,BufRead *.sim setf simula
" SINDA
au BufNewFile,BufRead *.sin,*.s85 setf sinda
" SiSU
au BufNewFile,BufRead *.sst,*.ssm,*.ssi,*.-sst,*._sst setf sisu
au BufNewFile,BufRead *.sst.meta,*.-sst.meta,*._sst.meta setf sisu
" SKILL
au BufNewFile,BufRead *.il,*.ils,*.cdf setf skill
" SLRN
au BufNewFile,BufRead .slrnrc setf slrnrc
au BufNewFile,BufRead *.score setf slrnsc
" Smalltalk (and TeX)
au BufNewFile,BufRead *.st setf st
au BufNewFile,BufRead *.cls
\ if getline(1) =~ '^%' |
\ setf tex |
\ else |
\ setf st |
\ endif
" Smarty templates
au BufNewFile,BufRead *.tpl setf smarty
" SMIL or XML
au BufNewFile,BufRead *.smil
\ if getline(1) =~ '<?\s*xml.*?>' |
\ setf xml |
\ else |
\ setf smil |
\ endif
" SMIL or SNMP MIB file
au BufNewFile,BufRead *.smi
\ if getline(1) =~ '\<smil\>' |
\ setf smil |
\ else |
\ setf mib |
\ endif
" SMITH
au BufNewFile,BufRead *.smt,*.smith setf smith
" Snobol4 and spitbol
au BufNewFile,BufRead *.sno,*.spt setf snobol4
" SNMP MIB files
au BufNewFile,BufRead *.mib,*.my setf mib
" Snort Configuration
au BufNewFile,BufRead *.hog,snort.conf,vision.conf setf hog
au BufNewFile,BufRead *.rules call s:FTRules()
let s:ft_rules_udev_rules_pattern = '^\s*\cudev_rules\s*=\s*"\([^"]\{-1,}\)/*".*'
func! s:FTRules()
try
let config_lines = readfile('/etc/udev/udev.conf')
catch /^Vim\%((\a\+)\)\=:E484/
setf hog
return
endtry
for line in config_lines
if line =~ s:ft_rules_udev_rules_pattern
let udev_rules = substitute(line, s:ft_rules_udev_rules_pattern, '\1', "")
let amatch_dirname = substitute(expand('<amatch>'), '^\(.*\)/[^/]\+$', '\1', "")
if amatch_dirname == udev_rules
setf udevrules
endif
break
endif
endfor
setf hog
endfunc
" Spec (Linux RPM)
au BufNewFile,BufRead *.spec setf spec
" Speedup (AspenTech plant simulator)
au BufNewFile,BufRead *.speedup,*.spdata,*.spd setf spup
" Slice
au BufNewFile,BufRead *.ice setf slice
" Spice
au BufNewFile,BufRead *.sp,*.spice setf spice
" Spyce
au BufNewFile,BufRead *.spy,*.spi setf spyce
" Squid
au BufNewFile,BufRead squid.conf setf squid
" SQL for Oracle Designer
au BufNewFile,BufRead *.tyb,*.typ,*.tyc,*.pkb,*.pks setf sql
" SQL
au BufNewFile,BufRead *.sql call s:SQL()
func! s:SQL()
if exists("g:filetype_sql")
exe "setf " . g:filetype_sql
else
setf sql
endif
endfunc
" SQLJ
au BufNewFile,BufRead *.sqlj setf sqlj
" SQR
au BufNewFile,BufRead *.sqr,*.sqi setf sqr
" OpenSSH configuration
au BufNewFile,BufRead ssh_config,*/.ssh/config setf sshconfig
" OpenSSH server configuration
au BufNewFile,BufRead sshd_config setf sshdconfig
" Stata
au BufNewFile,BufRead *.ado,*.class,*.do,*.imata,*.mata setf stata
" SMCL
au BufNewFile,BufRead *.hlp,*.ihlp,*.smcl setf smcl
" Stored Procedures
au BufNewFile,BufRead *.stp setf stp
" Standard ML
au BufNewFile,BufRead *.sml setf sml
" Sysctl
au BufNewFile,BufRead /etc/sysctl.conf setf sysctl
" Sudoers
au BufNewFile,BufRead /etc/sudoers,sudoers.tmp setf sudoers
" If the file has an extension of 't' and is in a directory 't' then it is
" almost certainly a Perl test file.
" If the first line starts with '#' and contains 'perl' it's probably a Perl
" file.
" (Slow test) If a file contains a 'use' statement then it is almost certainly
" a Perl file.
func! s:FTperl()
if expand("%:e") == 't' && expand("%:p:h:t") == 't'
setf perl
return 1
endif
if getline(1)[0] == '#' && getline(1) =~ 'perl'
setf perl
return 1
endif
if search('^use\s\s*\k', 'nc', 30)
setf perl
return 1
endif
return 0
endfunc
" Tads (or Nroff or Perl test file)
au BufNewFile,BufRead *.t
\ if !s:FTnroff() && !s:FTperl() | setf tads | endif
" Tags
au BufNewFile,BufRead tags setf tags
" TAK
au BufNewFile,BufRead *.tak setf tak
" Tcl (JACL too)
au BufNewFile,BufRead *.tcl,*.tk,*.itcl,*.itk,*.jacl setf tcl
" TealInfo
au BufNewFile,BufRead *.tli setf tli
" Telix Salt
au BufNewFile,BufRead *.slt setf tsalt
" Terminfo
au BufNewFile,BufRead *.ti setf terminfo
" TeX
au BufNewFile,BufRead *.latex,*.sty,*.dtx,*.ltx,*.bbl setf tex
au BufNewFile,BufRead *.tex call s:FTtex()
" Choose context, plaintex, or tex (LaTeX) based on these rules:
" 1. Check the first line of the file for "%&<format>".
" 2. Check the first 1000 non-comment lines for LaTeX or ConTeXt keywords.
" 3. Default to "latex" or to g:tex_flavor, can be set in user's vimrc.
func! s:FTtex()
let firstline = getline(1)
if firstline =~ '^%&\s*\a\+'
let format = tolower(matchstr(firstline, '\a\+'))
let format = substitute(format, 'pdf', '', '')
if format == 'tex'
let format = 'plain'
endif
else
" Default value, may be changed later:
let format = exists("g:tex_flavor") ? g:tex_flavor : 'plain'
" Save position, go to the top of the file, find first non-comment line.
let save_cursor = getpos('.')
call cursor(1,1)
let firstNC = search('^\s*[^[:space:]%]', 'c', 1000)
if firstNC " Check the next thousand lines for a LaTeX or ConTeXt keyword.
let lpat = 'documentclass\>\|usepackage\>\|begin{\|newcommand\>\|renewcommand\>'
let cpat = 'start\a\+\|setup\a\+\|usemodule\|enablemode\|enableregime\|setvariables\|useencoding\|usesymbols\|stelle\a\+\|verwende\a\+\|stel\a\+\|gebruik\a\+\|usa\a\+\|imposta\a\+\|regle\a\+\|utilisemodule\>'
let kwline = search('^\s*\\\%(' . lpat . '\)\|^\s*\\\(' . cpat . '\)',
\ 'cnp', firstNC + 1000)
if kwline == 1 " lpat matched
let format = 'latex'
elseif kwline == 2 " cpat matched
let format = 'context'
endif " If neither matched, keep default set above.
" let lline = search('^\s*\\\%(' . lpat . '\)', 'cn', firstNC + 1000)
" let cline = search('^\s*\\\%(' . cpat . '\)', 'cn', firstNC + 1000)
" if cline > 0
" let format = 'context'
" endif
" if lline > 0 && (cline == 0 || cline > lline)
" let format = 'tex'
" endif
endif " firstNC
call setpos('.', save_cursor)
endif " firstline =~ '^%&\s*\a\+'
" Translation from formats to file types. TODO: add AMSTeX, RevTex, others?
if format == 'plain'
setf plaintex
elseif format == 'context'
setf context
else " probably LaTeX
setf tex
endif
return
endfunc
" Context
au BufNewFile,BufRead tex/context/*/*.tex setf context
" Texinfo
au BufNewFile,BufRead *.texinfo,*.texi,*.txi setf texinfo
" TeX configuration
au BufNewFile,BufRead texmf.cnf setf texmf
" Tidy config
au BufNewFile,BufRead .tidyrc,tidyrc setf tidy
" TF mud client
au BufNewFile,BufRead *.tf,.tfrc,tfrc setf tf
" TPP - Text Presentation Program
au BufNewFile,BufReadPost *.tpp setf tpp
" Trustees
au BufNewFile,BufRead trustees.conf setf trustees
" TSS - Geometry
au BufNewFile,BufReadPost *.tssgm setf tssgm
" TSS - Optics
au BufNewFile,BufReadPost *.tssop setf tssop
" TSS - Command Line (temporary)
au BufNewFile,BufReadPost *.tsscl setf tsscl
" Motif UIT/UIL files
au BufNewFile,BufRead *.uit,*.uil setf uil
" Udev conf
au BufNewFile,BufRead /etc/udev/udev.conf setf udevconf
" Udev rules
au BufNewFile,BufRead /etc/udev/rules.d/*.rules setf udevrules
" Udev permissions
au BufNewFile,BufRead /etc/udev/permissions.d/*.permissions setf udevperm
"
" Udev symlinks config
au BufNewFile,BufRead /etc/udev/cdsymlinks.conf setf sh
" UnrealScript
au BufNewFile,BufRead *.uc setf uc
" Updatedb
au BufNewFile,BufRead /etc/updatedb.conf setf updatedb
" Vera
au BufNewFile,BufRead *.vr,*.vri,*.vrh setf vera
" Verilog HDL
au BufNewFile,BufRead *.v setf verilog
" Verilog-AMS HDL
au BufNewFile,BufRead *.va,*.vams setf verilogams
" VHDL
au BufNewFile,BufRead *.hdl,*.vhd,*.vhdl,*.vbe,*.vst setf vhdl
au BufNewFile,BufRead *.vhdl_[0-9]* call s:StarSetf('vhdl')
" Vim script
au BufNewFile,BufRead *.vim,*.vba,.exrc,_exrc setf vim
" Viminfo file
au BufNewFile,BufRead .viminfo,_viminfo setf viminfo
" Virata Config Script File
au BufRead,BufNewFile *.hw,*.module,*.pkg setf virata
" Visual Basic (also uses *.bas) or FORM
au BufNewFile,BufRead *.frm call s:FTVB("form")
" SaxBasic is close to Visual Basic
au BufNewFile,BufRead *.sba setf vb
" Vgrindefs file
au BufNewFile,BufRead vgrindefs setf vgrindefs
" VRML V1.0c
au BufNewFile,BufRead *.wrl setf vrml
" Webmacro
au BufNewFile,BufRead *.wm setf webmacro
" Wget config
au BufNewFile,BufRead .wgetrc,wgetrc setf wget
" Website MetaLanguage
au BufNewFile,BufRead *.wml setf wml
" Winbatch
au BufNewFile,BufRead *.wbt setf winbatch
" WSML
au BufNewFile,BufRead *.wsml setf wsml
" WvDial
au BufNewFile,BufRead wvdial.conf,.wvdialrc setf wvdial
" CVS RC file
au BufNewFile,BufRead .cvsrc setf cvsrc
" CVS commit file
au BufNewFile,BufRead cvs\d\+ setf cvs
" WEB (*.web is also used for Winbatch: Guess, based on expecting "%" comment
" lines in a WEB file).
au BufNewFile,BufRead *.web
\ if getline(1)[0].getline(2)[0].getline(3)[0].getline(4)[0].getline(5)[0] =~ "%" |
\ setf web |
\ else |
\ setf winbatch |
\ endif
" Windows Scripting Host and Windows Script Component
au BufNewFile,BufRead *.ws[fc] setf wsh
" XHTML
au BufNewFile,BufRead *.xhtml,*.xht setf xhtml
" X Pixmap (dynamically sets colors, use BufEnter to make it work better)
au BufEnter *.xpm
\ if getline(1) =~ "XPM2" |
\ setf xpm2 |
\ else |
\ setf xpm |
\ endif
au BufEnter *.xpm2 setf xpm2
" XFree86 config
au BufNewFile,BufRead XF86Config
\ if getline(1) =~ '\<XConfigurator\>' |
\ let b:xf86c_xfree86_version = 3 |
\ endif |
\ setf xf86conf
" Xorg config
au BufNewFile,BufRead xorg.conf,xorg.conf-4 let b:xf86c_xfree86_version = 4 | setf xf86conf
" Xinetd conf
au BufNewFile,BufRead /etc/xinetd.conf setf xinetd
" XS Perl extension interface language
au BufNewFile,BufRead *.xs setf xs
" X resources file
au BufNewFile,BufRead .Xdefaults,.Xpdefaults,.Xresources,xdm-config,*.ad setf xdefaults
" Xmath
au BufNewFile,BufRead *.msc,*.msf setf xmath
au BufNewFile,BufRead *.ms
\ if !s:FTnroff() | setf xmath | endif
" XML
au BufNewFile,BufRead *.xml
\ if getline(1) . getline(2) . getline(3) =~ '<!DOCTYPE.*DocBook' |
\ let b:docbk_type="xml" |
\ setf docbk |
\ else |
\ setf xml |
\ endif
" XMI (holding UML models) is also XML
au BufNewFile,BufRead *.xmi setf xml
" CSPROJ files are Visual Studio.NET's XML-based project config files
au BufNewFile,BufRead *.csproj,*.csproj.user setf xml
" Qt Linguist translation source and Qt User Interface Files are XML
au BufNewFile,BufRead *.ts,*.ui setf xml
" TPM's are RDF-based descriptions of TeX packages (Nikolai Weibull)
au BufNewFile,BufRead *.tpm setf xml
" Xdg menus
au BufNewFile,BufRead /etc/xdg/menus/*.menu setf xml
" Xquery
au BufNewFile,BufRead *.xq,*.xql,*.xqm,*.xquery,*.xqy setf xquery
" XSD
au BufNewFile,BufRead *.xsd setf xsd
" Xslt
au BufNewFile,BufRead *.xsl,*.xslt setf xslt
" Yacc
au BufNewFile,BufRead *.yy setf yacc
" Yacc or racc
au BufNewFile,BufRead *.y call s:FTy()
func! s:FTy()
let n = 1
while n < 100 && n < line("$")
let line = getline(n)
if line =~ '^\s*%'
setf yacc
return
endif
if getline(n) =~ '^\s*\(#\|class\>\)' && getline(n) !~ '^\s*#\s*include'
setf racc
return
endif
let n = n + 1
endwhile
setf yacc
endfunc
" Yaml
au BufNewFile,BufRead *.yaml,*.yml setf yaml
" Zope
" dtml (zope dynamic template markup language), pt (zope page template),
" cpt (zope form controller page template)
au BufNewFile,BufRead *.dtml,*.pt,*.cpt call s:FThtml()
" zsql (zope sql method)
au BufNewFile,BufRead *.zsql call s:SQL()
" Z80 assembler asz80
au BufNewFile,BufRead *.z8a setf z8a
augroup END
" Source the user-specified filetype file, for backwards compatibility with
" Vim 5.x.
if exists("myfiletypefile") && filereadable(expand(myfiletypefile))
execute "source " . myfiletypefile
endif
" Check for "*" after loading myfiletypefile, so that scripts.vim is only used
" when there are no matching file name extensions.
" Don't do this for compressed files.
augroup filetypedetect
au BufNewFile,BufRead *
\ if !did_filetype() && expand("<amatch>") !~ g:ft_ignore_pat
\ | runtime! scripts.vim | endif
au StdinReadPost * if !did_filetype() | runtime! scripts.vim | endif
" Extra checks for when no filetype has been detected now. Mostly used for
" patterns that end in "*". E.g., "zsh*" matches "zsh.vim", but that's a Vim
" script file.
" Most of these should call s:StarSetf() to avoid names ending in .gz and the
" like are used.
" Asterisk config file
au BufNewFile,BufRead *asterisk/*.conf* call s:StarSetf('asterisk')
au BufNewFile,BufRead *asterisk*/*voicemail.conf* call s:StarSetf('asteriskvm')
" Bazaar version control
au BufNewFile,BufRead bzr_log.* setf bzr
" BIND zone
au BufNewFile,BufRead */named/db.*,*/bind/db.* call s:StarSetf('bindzone')
" Changelog
au BufNewFile,BufRead [cC]hange[lL]og*
\ if getline(1) =~ '; urgency='
\| call s:StarSetf('debchangelog')
\|else
\| call s:StarSetf('changelog')
\|endif
" Crontab
au BufNewFile,BufRead crontab,crontab.* call s:StarSetf('crontab')
" Debian Sources.list
au BufNewFile,BufRead /etc/apt/sources.list.d/* call s:StarSetf('debsources')
" Dracula
au BufNewFile,BufRead drac.* call s:StarSetf('dracula')
" Fvwm
au BufNewFile,BufRead */.fvwm/* call s:StarSetf('fvwm')
au BufNewFile,BufRead *fvwmrc*,*fvwm95*.hook
\ let b:fvwm_version = 1 | call s:StarSetf('fvwm')
au BufNewFile,BufRead *fvwm2rc*
\ if expand("<afile>:e") == "m4"
\| call s:StarSetf('fvwm2m4')
\|else
\| let b:fvwm_version = 2 | call s:StarSetf('fvwm')
\|endif
" GTK RC
au BufNewFile,BufRead .gtkrc*,gtkrc* call s:StarSetf('gtkrc')
" Jam
au BufNewFile,BufRead Prl*.*,JAM*.* call s:StarSetf('jam')
" Jargon
au! BufNewFile,BufRead *jarg*
\ if getline(1).getline(2).getline(3).getline(4).getline(5) =~? 'THIS IS THE JARGON FILE'
\| call s:StarSetf('jargon')
\|endif
" Kconfig
au BufNewFile,BufRead Kconfig.* call s:StarSetf('kconfig')
" Makefile
au BufNewFile,BufRead [mM]akefile* call s:StarSetf('make')
" Modconf
au BufNewFile,BufRead /etc/modprobe.* call s:StarSetf('modconf')
" Ruby Makefile
au BufNewFile,BufRead [rR]akefile* call s:StarSetf('ruby')
" Mutt setup file
au BufNewFile,BufRead mutt{ng,}rc*,Mutt{ng,}rc* call s:StarSetf('muttrc')
" Nroff macros
au BufNewFile,BufRead tmac.* call s:StarSetf('nroff')
" Pam conf
au BufNewFile,BufRead /etc/pam.d/* call s:StarSetf('pamconf')
" Printcap and Termcap
au BufNewFile,BufRead *printcap*
\ if !did_filetype()
\| let b:ptcap_type = "print" | call s:StarSetf('ptcap')
\|endif
au BufNewFile,BufRead *termcap*
\ if !did_filetype()
\| let b:ptcap_type = "term" | call s:StarSetf('ptcap')
\|endif
" Vim script
au BufNewFile,BufRead *vimrc* call s:StarSetf('vim')
" Subversion commit file
au BufNewFile,BufRead svn-commit*.tmp setf svn
" X resources file
au BufNewFile,BufRead Xresources*,*/app-defaults/*,*/Xresources/* call s:StarSetf('xdefaults')
" XFree86 config
au BufNewFile,BufRead XF86Config-4*
\ let b:xf86c_xfree86_version = 4 | call s:StarSetf('xf86conf')
au BufNewFile,BufRead XF86Config*
\ if getline(1) =~ '\<XConfigurator\>'
\| let b:xf86c_xfree86_version = 3
\|endif
\|call s:StarSetf('xf86conf')
" X11 xmodmap
au BufNewFile,BufRead *xmodmap* call s:StarSetf('xmodmap')
" Xinetd conf
au BufNewFile,BufRead /etc/xinetd.d/* call s:StarSetf('xinetd')
" Z-Shell script
au BufNewFile,BufRead zsh*,zlog* call s:StarSetf('zsh')
" Generic configuration file (check this last, it's just guessing!)
au BufNewFile,BufRead,StdinReadPost *
\ if !did_filetype() && expand("<amatch>") !~ g:ft_ignore_pat
\ && (getline(1) =~ '^#' || getline(2) =~ '^#' || getline(3) =~ '^#'
\ || getline(4) =~ '^#' || getline(5) =~ '^#') |
\ setf conf |
\ endif
" Use the plugin-filetype checks last, they may overrule any of the previously
" detected filetypes.
runtime! ftdetect/*.vim
augroup END
" If the GUI is already running, may still need to install the Syntax menu.
" Don't do it when the 'M' flag is included in 'guioptions'.
if has("menu") && has("gui_running")
\ && !exists("did_install_syntax_menu") && &guioptions !~# "M"
source <sfile>:p:h/menu.vim
endif
" Function called for testing all functions defined here. These are
" script-local, thus need to be executed here.
" Returns a string with error messages (hopefully empty).
func! TestFiletypeFuncs(testlist)
let output = ''
for f in a:testlist
try
exe f
catch
let output = output . "\n" . f . ": " . v:exception
endtry
endfor
return output
endfunc
" Restore 'cpoptions'
let &cpo = s:cpo_save
unlet s:cpo_save