ref: 4421d6d3b59e26be3e191bcb19a203891dcf07d8
dir: /feature.h/
/* vi:set ts=8 sts=4 sw=4:
*
* VIM - Vi IMproved by Bram Moolenaar
*
* Do ":help uganda" in Vim to read copying and usage conditions.
* Do ":help credits" in Vim to see a list of people who contributed.
*/
/*
* feature.h: Defines for optional code and preferences
*
* Edit this file to include/exclude parts of Vim, before compiling.
* The only other file that may be edited is Makefile, it contains machine
* specific options.
*
* To include specific options, change the "#if*" and "#endif" into comments,
* or uncomment the "#define".
* To exclude specific options, change the "#define" into a comment.
*/
/*
* When adding a new feature:
* - Add a #define below.
* - Add a message in the table above ex_version().
* - Add a string to f_has().
* - Add a feature to ":help feature-list" in doc/eval.txt.
* - Add feature to ":help +feature-list" in doc/various.txt.
* - Add comment for the documentation of commands that use the feature.
*/
/*
* Basic choices:
* ==============
*
* +tiny almost no features enabled, not even multiple windows
* +small few features enabled, as basic as possible
* +normal A default selection of features enabled
* +big many features enabled, as rich as possible.
* +huge all possible featues enabled.
*
* When +small is used, +tiny is also included. +normal implies +small, etc.
*/
/*
* Uncomment one of these to override the default. For unix use a configure
* argument, see Makefile.
*/
#if !defined(FEAT_TINY) && !defined(FEAT_SMALL) && !defined(FEAT_NORMAL) \
&& !defined(FEAT_BIG) && !defined(FEAT_HUGE)
/* #define FEAT_TINY */
/* #define FEAT_SMALL */
/* #define FEAT_NORMAL */
/* #define FEAT_BIG */
/* #define FEAT_HUGE */
#endif
/*
* These executables are made available with the +big feature, because they
* are supposed to have enough RAM: Win32 (console & GUI), dos32, OS/2 and VMS.
* The dos16 version has very little RAM available, use +small.
*/
#if !defined(FEAT_TINY) && !defined(FEAT_SMALL) && !defined(FEAT_NORMAL) \
&& !defined(FEAT_BIG) && !defined(FEAT_HUGE)
# if defined(MSWIN) || defined(DJGPP) || defined(OS2) || defined(VMS) || defined(MACOS) || defined(AMIGA)
# define FEAT_BIG
# else
# ifdef MSDOS
# define FEAT_SMALL
# else
# define FEAT_NORMAL
# endif
# endif
#endif
/*
* Each feature implies including the "smaller" ones.
*/
#ifdef FEAT_HUGE
# define FEAT_BIG
#endif
#ifdef FEAT_BIG
# define FEAT_NORMAL
#endif
#ifdef FEAT_NORMAL
# define FEAT_SMALL
#endif
#ifdef FEAT_SMALL
# define FEAT_TINY
#endif
/*
* Optional code (see ":help +feature-list")
* =============
*/
/*
* +windows Multiple windows. Without this there is no help
* window and no status lines.
*/
#ifdef FEAT_SMALL
# define FEAT_WINDOWS
#endif
/*
* +listcmds Vim commands for the buffer list and the argument
* list. Without this there is no ":buffer" ":bnext",
* ":bdel", ":argdelete", etc.
*/
#ifdef FEAT_NORMAL
# define FEAT_LISTCMDS
#endif
/*
* +vertsplit Vertically split windows.
*/
#ifdef FEAT_NORMAL
# define FEAT_VERTSPLIT
#endif
#if defined(FEAT_VERTSPLIT) && !defined(FEAT_WINDOWS)
# define FEAT_WINDOWS
#endif
/*
* +cmdhist Command line history.
*/
#ifdef FEAT_SMALL
# define FEAT_CMDHIST
#endif
/*
* Message history is fixed at 100 message, 20 for the tiny version.
*/
#ifdef FEAT_SMALL
# define MAX_MSG_HIST_LEN 100
#else
# define MAX_MSG_HIST_LEN 20
#endif
/*
* +jumplist Jumplist, CTRL-O and CTRL-I commands.
*/
#ifdef FEAT_SMALL
# define FEAT_JUMPLIST
#endif
/* the cmdline-window requires FEAT_VERTSPLIT and FEAT_CMDHIST */
#if defined(FEAT_VERTSPLIT) && defined(FEAT_CMDHIST)
# define FEAT_CMDWIN
#endif
/*
* +folding Fold lines.
*/
#ifdef FEAT_NORMAL
# define FEAT_FOLDING
#endif
/*
* +digraphs Digraphs.
* In insert mode and on the command line you will be
* able to use digraphs. The CTRL-K command will work.
* Define OLD_DIGRAPHS to get digraphs compatible with
* Vim 5.x. The new ones are from RFC 1345.
*/
#ifdef FEAT_NORMAL
# define FEAT_DIGRAPHS
/* #define OLD_DIGRAPHS */
#endif
/*
* +langmap 'langmap' option. Only useful when you put your
* keyboard in a special language mode, e.g. for typing
* greek.
*/
#ifdef FEAT_BIG
# define FEAT_LANGMAP
#endif
/*
* +keymap 'keymap' option. Allows you to map typed keys in
* Insert mode for a special language.
*/
#ifdef FEAT_BIG
# define FEAT_KEYMAP
#endif
/*
* +localmap Mappings and abbreviations local to a buffer.
*/
#ifdef FEAT_NORMAL
# define FEAT_LOCALMAP
#endif
/*
* +insert_expand CTRL-N/CTRL-P/CTRL-X in insert mode. Takes about
* 4Kbyte of code.
*/
#ifdef FEAT_NORMAL
# define FEAT_INS_EXPAND
#endif
/*
* +cmdline_compl completion of mappings/abbreviations in cmdline mode.
* Takes a few Kbyte of code.
*/
#ifdef FEAT_NORMAL
# define FEAT_CMDL_COMPL
#endif
#ifdef FEAT_NORMAL
# define VIM_BACKTICK /* internal backtick expansion */
#endif
/*
* +visual Visual mode.
* +visualextra Extra features for Visual mode (mostly block operators).
*/
#ifdef FEAT_SMALL
# define FEAT_VISUAL
# ifdef FEAT_NORMAL
# define FEAT_VISUALEXTRA
# endif
#else
# ifdef FEAT_CLIPBOARD
# undef FEAT_CLIPBOARD /* can't use clipboard without Visual mode */
# endif
#endif
/*
* +virtualedit 'virtualedit' option and its implementation
*/
#ifdef FEAT_NORMAL
# define FEAT_VIRTUALEDIT
#endif
/*
* +vreplace "gR" and "gr" commands.
*/
#ifdef FEAT_NORMAL
# define FEAT_VREPLACE
#endif
/*
* +cmdline_info 'showcmd' and 'ruler' options.
*/
#ifdef FEAT_NORMAL
# define FEAT_CMDL_INFO
#endif
/*
* +linebreak 'showbreak', 'breakat' and 'linebreak' options.
* Also 'numberwidth'.
*/
#ifdef FEAT_NORMAL
# define FEAT_LINEBREAK
#endif
/*
* +ex_extra ":retab", ":right", ":left", ":center", ":normal".
*/
#ifdef FEAT_NORMAL
# define FEAT_EX_EXTRA
#endif
/*
* +extra_search 'hlsearch' and 'incsearch' options.
*/
#ifdef FEAT_NORMAL
# define FEAT_SEARCH_EXTRA
#endif
/*
* +quickfix Quickfix commands.
*/
#ifdef FEAT_NORMAL
# define FEAT_QUICKFIX
#endif
/*
* +file_in_path "gf" and "<cfile>" commands.
*/
#ifdef FEAT_NORMAL
# define FEAT_SEARCHPATH
#endif
/*
* +find_in_path "[I" ":isearch" "^W^I", ":checkpath", etc.
*/
#ifdef FEAT_NORMAL
# ifdef FEAT_SEARCHPATH /* FEAT_SEARCHPATH is required */
# define FEAT_FIND_ID
# endif
#endif
/*
* +path_extra up/downwards searching in 'path' and 'tags'.
*/
#ifdef FEAT_NORMAL
# define FEAT_PATH_EXTRA
#endif
/*
* +rightleft Right-to-left editing/typing support.
*/
#ifdef FEAT_BIG
# define FEAT_RIGHTLEFT
#endif
/*
* +farsi Farsi (Persian language) Keymap support.
* Requires FEAT_RIGHTLEFT.
*/
#ifdef FEAT_BIG
# define FEAT_FKMAP
#endif
#ifdef FEAT_FKMAP
# ifndef FEAT_RIGHTLEFT
# define FEAT_RIGHTLEFT
# endif
#endif
/*
* +arabic Arabic keymap and shaping support.
* Requires FEAT_RIGHTLEFT and FEAT_MBYTE.
*/
#if defined(FEAT_BIG) && !defined(WIN16) && SIZEOF_INT >= 4 && !defined(EBCDIC)
# define FEAT_ARABIC
#endif
#ifdef FEAT_ARABIC
# ifndef FEAT_RIGHTLEFT
# define FEAT_RIGHTLEFT
# endif
#endif
/*
* +emacs_tags When FEAT_EMACS_TAGS defined: Include support for
* emacs style TAGS file.
*/
#ifdef FEAT_BIG
# define FEAT_EMACS_TAGS
#endif
/*
* +tag_binary Can use a binary search for the tags file.
*
* Disabled for EBCDIC:
* On OS/390 Unix we have the problem that /bin/sort sorts ASCII instead of
* EBCDIC. With this binary search doesn't work, as VIM expects a tag file
* sorted by character values. I'm not sure how to fix this. Should we really
* do a EBCDIC to ASCII conversion for this??
*/
#if defined(FEAT_NORMAL) && !defined(EBCDIC)
# define FEAT_TAG_BINS
#endif
/*
* +tag_old_static Old style static tags: "file:tag file ..". Slows
* down tag searching a bit.
*/
#ifdef FEAT_NORMAL
# define FEAT_TAG_OLDSTATIC
#endif
/*
* +tag_any_white Allow any white space to separate the fields in a tags
* file. When not defined, only a TAB is allowed.
*/
/* #define FEAT_TAG_ANYWHITE */
/*
* +cscope Unix only: Cscope support.
*/
#if defined(UNIX) && defined(FEAT_BIG) && !defined(FEAT_CSCOPE) && !defined(MACOS_X)
# define FEAT_CSCOPE
#endif
/*
* +eval Built-in script language and expression evaluation,
* ":let", ":if", etc.
*/
#ifdef FEAT_NORMAL
# define FEAT_EVAL
#endif
/*
* +profile Profiling for functions and scripts.
*/
#if defined(FEAT_HUGE) \
&& defined(FEAT_EVAL) \
&& ((defined(HAVE_GETTIMEOFDAY) && defined(HAVE_SYS_TIME_H)) \
|| defined(WIN3264))
# define FEAT_PROFILE
#endif
/*
* +reltime reltime() function
*/
#if defined(FEAT_NORMAL) \
&& defined(FEAT_EVAL) \
&& ((defined(HAVE_GETTIMEOFDAY) && defined(HAVE_SYS_TIME_H)) \
|| defined(WIN3264))
# define FEAT_RELTIME
#endif
/*
* +textobjects Text objects: "vaw", "das", etc.
*/
#if defined(FEAT_NORMAL) && defined(FEAT_EVAL)
# define FEAT_TEXTOBJ
#endif
/*
* Insert mode completion with 'completefunc'.
*/
#if defined(FEAT_INS_EXPAND) && defined(FEAT_EVAL)
# define FEAT_COMPL_FUNC
#endif
/*
* +user_commands Allow the user to define his own commands.
*/
#ifdef FEAT_NORMAL
# define FEAT_USR_CMDS
#endif
/*
* +printer ":hardcopy" command
* +postscript Printing uses PostScript file output.
*/
#if defined(FEAT_NORMAL) && (defined(MSWIN) || defined(FEAT_EVAL)) \
&& !defined(AMIGA)
# define FEAT_PRINTER
#endif
#if defined(FEAT_PRINTER) && ((defined(MSWIN) && defined(MSWINPS)) \
|| (!defined(MSWIN) && defined(FEAT_EVAL)))
# define FEAT_POSTSCRIPT
#endif
/*
* +modify_fname modifiers for file name. E.g., "%:p:h".
*/
#ifdef FEAT_NORMAL
# define FEAT_MODIFY_FNAME
#endif
/*
* +autocmd ":autocmd" command
*/
#ifdef FEAT_NORMAL
# define FEAT_AUTOCMD
#endif
/*
* +diff Displaying diffs in a nice way.
* Requires +windows and +autocmd.
*/
#if defined(FEAT_NORMAL) && defined(FEAT_WINDOWS) && defined(FEAT_AUTOCMD)
# define FEAT_DIFF
#endif
/*
* +title 'title' and 'icon' options
* +statusline 'statusline', 'rulerformat' and special format of
* 'titlestring' and 'iconstring' options.
* +byte_offset '%o' in 'statusline' and builtin functions line2byte()
* and byte2line().
* Note: Required for Macintosh.
*/
#if defined(FEAT_NORMAL) && !defined(MSDOS)
# define FEAT_TITLE
#endif
#ifdef FEAT_NORMAL
# define FEAT_STL_OPT
# ifndef FEAT_CMDL_INFO
# define FEAT_CMDL_INFO /* 'ruler' is required for 'statusline' */
# endif
#endif
#ifdef FEAT_NORMAL
# define FEAT_BYTEOFF
#endif
/*
* +wildignore 'wildignore' and 'backupskip' options
* Needed for Unix to make "crontab -e" work.
*/
#if defined(FEAT_NORMAL) || defined(UNIX)
# define FEAT_WILDIGN
#endif
/*
* +wildmenu 'wildmenu' option
*/
#if defined(FEAT_NORMAL) && defined(FEAT_WINDOWS)
# define FEAT_WILDMENU
#endif
/*
* +osfiletype filetype checking in autocommand patterns.
* Only on systems that support filetypes (RISC OS).
*/
#if 0
# define FEAT_OSFILETYPE
# define DFLT_OFT "Text"
#endif
/*
* +viminfo reading/writing the viminfo file. Takes about 8Kbyte
* of code.
* VIMINFO_FILE Location of user .viminfo file (should start with $).
* VIMINFO_FILE2 Location of alternate user .viminfo file.
*/
#ifdef FEAT_NORMAL
# define FEAT_VIMINFO
/* #define VIMINFO_FILE "$HOME/foo/.viminfo" */
/* #define VIMINFO_FILE2 "~/bar/.viminfo" */
#endif
/*
* +syntax syntax highlighting. When using this, it's a good
* idea to have +autocmd and +eval too.
*/
#if defined(FEAT_NORMAL) || defined(PROTO)
# define FEAT_SYN_HL
#endif
/*
* +spell spell checking
*/
#if defined(FEAT_NORMAL) || defined(PROTO)
# define FEAT_SPELL
#endif
/*
* +builtin_terms Choose one out of the following four:
*
* NO_BUILTIN_TCAPS Do not include any builtin termcap entries (used only
* with HAVE_TGETENT defined).
*
* (nothing) Machine specific termcap entries will be included.
* This is default for win16 to save static data.
*
* SOME_BUILTIN_TCAPS Include most useful builtin termcap entries (used only
* with NO_BUILTIN_TCAPS not defined).
* This is the default.
*
* ALL_BUILTIN_TCAPS Include all builtin termcap entries
* (used only with NO_BUILTIN_TCAPS not defined).
*/
#ifdef HAVE_TGETENT
/* #define NO_BUILTIN_TCAPS */
#endif
#if !defined(NO_BUILTIN_TCAPS) && !defined(FEAT_GUI_W16)
# ifdef FEAT_BIG
# define ALL_BUILTIN_TCAPS
# else
# define SOME_BUILTIN_TCAPS /* default */
# endif
#endif
/*
* +lispindent lisp indenting (From Eric Fischer).
* +cindent C code indenting (From Eric Fischer).
* +smartindent smart C code indenting when the 'si' option is set.
*
* These two need to be defined when making prototypes.
*/
#if defined(FEAT_NORMAL) || defined(PROTO)
# define FEAT_LISP
#endif
#if defined(FEAT_NORMAL) || defined(PROTO)
# define FEAT_CINDENT
#endif
#ifdef FEAT_NORMAL
# define FEAT_SMARTINDENT
#endif
/*
* +comments 'comments' option.
*/
#ifdef FEAT_NORMAL
# define FEAT_COMMENTS
#endif
/*
* +cryptv Encryption (by Mohsin Ahmed <mosh@sasi.com>).
*/
#if defined(FEAT_NORMAL) || defined(PROTO)
# define FEAT_CRYPT
#endif
/*
* +mksession ":mksession" command.
* Requires +windows and +vertsplit.
*/
#if defined(FEAT_NORMAL) && defined(FEAT_WINDOWS) && defined(FEAT_VERTSPLIT)
# define FEAT_SESSION
#endif
/*
* +multi_lang Multi language support. ":menutrans", ":language", etc.
* +gettext Message translations (requires +multi_lang)
* (only when "lang" archive unpacked)
*/
#ifdef FEAT_NORMAL
# define FEAT_MULTI_LANG
#endif
#if defined(HAVE_GETTEXT) && defined(FEAT_MULTI_LANG) \
&& (defined(HAVE_LOCALE_H) || defined(X_LOCALE))
# define FEAT_GETTEXT
#endif
/*
* +multi_byte Generic multi-byte character handling. Doesn't work
* with 16 bit ints. Required for GTK+ 2.
*
* Disabled for EBCDIC:
* Multibyte support doesn't work on OS390 Unix currently.
*/
#if (defined(FEAT_BIG) || defined(HAVE_GTK2) || defined(FEAT_ARABIC) || defined(PLAN9)) \
&& !defined(FEAT_MBYTE) && !defined(WIN16) \
&& SIZEOF_INT >= 4 && !defined(EBCDIC)
# define FEAT_MBYTE
#endif
/* Define this if you want to use 16 bit Unicode only, reduces memory used for
* the screen structures. */
/* #define UNICODE16 */
/*
* +multi_byte_ime Win32 IME input method. Requires +multi_byte.
* Only for far-east Windows, so IME can be used to input
* chars. Not tested much!
*/
#if defined(FEAT_GUI_W32) && !defined(FEAT_MBYTE_IME)
/* #define FEAT_MBYTE_IME */
# endif
#if defined(FEAT_MBYTE_IME) && !defined(FEAT_MBYTE)
# define FEAT_MBYTE
#endif
#if defined(FEAT_MBYTE) && SIZEOF_INT < 4 && !defined(PROTO)
Error: Can only handle multi-byte feature with 32 bit int or larger
#endif
/* Use iconv() when it's available. */
#if defined(FEAT_MBYTE) && ((defined(HAVE_ICONV_H) && defined(HAVE_ICONV)) \
|| defined(DYNAMIC_ICONV))
# define USE_ICONV
#endif
/*
* +xim X Input Method. For entering special languages like
* chinese and Japanese.
* +hangul_input Internal Hangul input method. Must be included
* through configure: "--enable-hangulin"
* Both are for Unix and VMS only.
*/
#ifndef FEAT_XIM
/* #define FEAT_XIM */
#endif
#if defined(FEAT_XIM) && defined(FEAT_GUI_GTK)
# define USE_XIM 1 /* needed for GTK include files */
#endif
#ifdef FEAT_HANGULIN
# define HANGUL_DEFAULT_KEYBOARD 2 /* 2 or 3 bulsik keyboard */
# define ESC_CHG_TO_ENG_MODE /* if defined, when ESC pressed,
* turn to english mode
*/
# if !defined(FEAT_XFONTSET) && defined(HAVE_X11)
# define FEAT_XFONTSET /* Hangul input requires xfontset */
# endif
# if defined(FEAT_XIM) && !defined(LINT)
Error: You should select only ONE of XIM and HANGUL INPUT
# endif
#endif
#if defined(FEAT_HANGULIN) || defined(FEAT_XIM)
/* # define X_LOCALE */ /* for OS with incomplete locale
support, like old linux versions. */
/* # define SLOW_XSERVER */ /* for extremely slow X server */
#endif
/*
* +xfontset X fontset support. For outputting wide characters.
*/
#ifndef FEAT_XFONTSET
# if defined(FEAT_MBYTE) && defined(HAVE_X11) && !defined(HAVE_GTK2)
# define FEAT_XFONTSET
# else
/* # define FEAT_XFONTSET */
# endif
#endif
/*
* +libcall libcall() function
*/
/* Using dlopen() also requires dlsym() to be available. */
#if defined(HAVE_DLOPEN) && defined(HAVE_DLSYM)
# define USE_DLOPEN
#endif
#if defined(FEAT_EVAL) && (defined(WIN3264) || ((defined(UNIX) || defined(VMS)) \
&& (defined(USE_DLOPEN) || defined(HAVE_SHL_LOAD))))
# define FEAT_LIBCALL
#endif
/*
* +scrollbind synchronization of split windows
*/
#if defined(FEAT_NORMAL) && defined(FEAT_WINDOWS)
# define FEAT_SCROLLBIND
#endif
/*
* +menu ":menu" command
*/
#ifdef FEAT_NORMAL
# define FEAT_MENU
# ifdef FEAT_GUI_W32
# define FEAT_TEAROFF
# endif
#endif
/* There are two ways to use XPM. */
#if (defined(HAVE_XM_XPMP_H) && defined(FEAT_GUI_MOTIF)) \
|| defined(HAVE_X11_XPM_H)
# define HAVE_XPM 1
#endif
/*
* +toolbar Include code for a toolbar (for the Win32 GUI, GTK
* always has it). But only if menus are enabled.
*/
#if defined(FEAT_NORMAL) && defined(FEAT_MENU) \
&& (defined(FEAT_GUI_GTK) \
|| defined(FEAT_GUI_MSWIN) \
|| ((defined(FEAT_GUI_MOTIF) || defined(FEAT_GUI_ATHENA)) \
&& defined(HAVE_XPM)) \
|| defined(FEAT_GUI_PHOTON))
# define FEAT_TOOLBAR
#endif
#if defined(FEAT_TOOLBAR) && !defined(FEAT_MENU)
# define FEAT_MENU
#endif
/*
* GUI tabline
*/
#if defined(FEAT_WINDOWS) && defined(FEAT_NORMAL) \
&& (defined(FEAT_GUI_GTK) \
|| (defined(FEAT_GUI_MOTIF) && defined(HAVE_XM_NOTEBOOK_H)) \
|| defined(FEAT_GUI_MAC) \
|| (defined(FEAT_GUI_MSWIN) && (!defined(_MSC_VER) || _MSC_VER > 1020)))
# define FEAT_GUI_TABLINE
#endif
/*
* +browse ":browse" command.
*/
#if defined(FEAT_NORMAL) && (defined(FEAT_GUI_MSWIN) || defined(FEAT_GUI_MOTIF) || defined(FEAT_GUI_ATHENA) || defined(FEAT_GUI_GTK) || defined(FEAT_GUI_PHOTON) || defined(FEAT_GUI_MAC))
# define FEAT_BROWSE
#endif
/*
* +dialog_gui Use GUI dialog.
* +dialog_con May use Console dialog.
* When none of these defined there is no dialog support.
*/
#ifdef FEAT_NORMAL
# if ((defined(FEAT_GUI_ATHENA) || defined(FEAT_GUI_MOTIF)) \
&& defined(HAVE_X11_XPM_H)) \
|| defined(FEAT_GUI_GTK) \
|| defined(FEAT_GUI_PHOTON) \
|| defined(FEAT_GUI_MSWIN) \
|| defined(FEAT_GUI_MAC)
# define FEAT_CON_DIALOG
# define FEAT_GUI_DIALOG
# else
# define FEAT_CON_DIALOG
# endif
#endif
#if !defined(FEAT_GUI_DIALOG) && (defined(FEAT_GUI_MOTIF) \
|| defined(FEAT_GUI_ATHENA) || defined(FEAT_GUI_GTK))
/* need a dialog to show error messages when starting from the desktop */
# define FEAT_GUI_DIALOG
#endif
#if defined(FEAT_GUI_DIALOG) && \
(defined(FEAT_GUI_MOTIF) || defined(FEAT_GUI_ATHENA) \
|| defined(FEAT_GUI_GTK) || defined(FEAT_GUI_MSWIN) \
|| defined(FEAT_GUI_PHOTON) || defined(FEAT_GUI_MAC))
# define FEAT_GUI_TEXTDIALOG
#endif
/* Mac specific thing: Codewarrior interface. */
#ifdef FEAT_GUI_MAC
# define FEAT_CW_EDITOR
#endif
/*
* Preferences:
* ============
*/
/*
* +writebackup 'writebackup' is default on:
* Use a backup file while overwriting a file. But it's
* deleted again when 'backup' is not set. Changing this
* is strongly discouraged: You can loose all your
* changes when the computer crashes while writing the
* file.
* VMS note: It does work on VMS as well, but because of
* version handling it does not have any purpose.
* Overwrite will write to the new version.
*/
#ifndef VMS
# define FEAT_WRITEBACKUP
#endif
/*
* +xterm_save The t_ti and t_te entries for the builtin xterm will
* be set to save the screen when starting Vim and
* restoring it when exiting.
*/
/* #define FEAT_XTERM_SAVE */
/*
* DEBUG Output a lot of debugging garbage.
*/
/* #define DEBUG */
/*
* STARTUPTIME Time the startup process. Writes a "vimstartup" file
* with timestamps.
*/
/* #define STARTUPTIME "vimstartup" */
/*
* MEM_PROFILE Debugging of memory allocation and freeing.
*/
/* #define MEM_PROFILE */
/*
* VIMRC_FILE Name of the .vimrc file in current dir.
*/
/* #define VIMRC_FILE ".vimrc" */
/*
* EXRC_FILE Name of the .exrc file in current dir.
*/
/* #define EXRC_FILE ".exrc" */
/*
* GVIMRC_FILE Name of the .gvimrc file in current dir.
*/
/* #define GVIMRC_FILE ".gvimrc" */
/*
* SESSION_FILE Name of the default ":mksession" file.
*/
#define SESSION_FILE "Session.vim"
/*
* USR_VIMRC_FILE Name of the user .vimrc file.
* USR_VIMRC_FILE2 Name of alternate user .vimrc file.
* USR_VIMRC_FILE3 Name of alternate user .vimrc file.
*/
/* #define USR_VIMRC_FILE "~/foo/.vimrc" */
/* #define USR_VIMRC_FILE2 "~/bar/.vimrc" */
/* #define USR_VIMRC_FILE3 "$VIM/.vimrc" */
/*
* EVIM_FILE Name of the evim.vim script file
*/
/* #define EVIM_FILE "$VIMRUNTIME/evim.vim" */
/*
* USR_EXRC_FILE Name of the user .exrc file.
* USR_EXRC_FILE2 Name of the alternate user .exrc file.
*/
/* #define USR_EXRC_FILE "~/foo/.exrc" */
/* #define USR_EXRC_FILE2 "~/bar/.exrc" */
/*
* USR_GVIMRC_FILE Name of the user .gvimrc file.
* USR_GVIMRC_FILE2 Name of the alternate user .gvimrc file.
*/
/* #define USR_GVIMRC_FILE "~/foo/.gvimrc" */
/* #define USR_GVIMRC_FILE2 "~/bar/.gvimrc" */
/* #define USR_GVIMRC_FILE3 "$VIM/.gvimrc" */
/*
* SYS_VIMRC_FILE Name of the system-wide .vimrc file.
*/
/* #define SYS_VIMRC_FILE "/etc/vimrc" */
/*
* SYS_GVIMRC_FILE Name of the system-wide .gvimrc file.
*/
/* #define SYS_GVIMRC_FILE "/etc/gvimrc" */
/*
* DFLT_HELPFILE Name of the help file.
*/
/* # define DFLT_HELPFILE "$VIMRUNTIME/doc/help.txt.gz" */
/*
* File names for:
* FILETYPE_FILE switch on file type detection
* FTPLUGIN_FILE switch on loading filetype plugin files
* INDENT_FILE switch on loading indent files
* FTOFF_FILE switch off file type detection
* FTPLUGOF_FILE switch off loading settings files
* INDOFF_FILE switch off loading indent files
*/
/* # define FILETYPE_FILE "filetype.vim" */
/* # define FTPLUGIN_FILE "ftplugin.vim" */
/* # define INDENT_FILE "indent.vim" */
/* # define FTOFF_FILE "ftoff.vim" */
/* # define FTPLUGOF_FILE "ftplugof.vim" */
/* # define INDOFF_FILE "indoff.vim" */
/*
* SYS_MENU_FILE Name of the default menu.vim file.
*/
/* # define SYS_MENU_FILE "$VIMRUNTIME/menu.vim" */
/*
* SYS_OPTWIN_FILE Name of the default optwin.vim file.
*/
#ifndef SYS_OPTWIN_FILE
# define SYS_OPTWIN_FILE "$VIMRUNTIME/optwin.vim"
#endif
/*
* SYNTAX_FNAME Name of a syntax file, where %s is the syntax name.
*/
/* #define SYNTAX_FNAME "/foo/%s.vim" */
/*
* RUNTIME_DIRNAME Generic name for the directory of the runtime files.
*/
#ifndef RUNTIME_DIRNAME
# define RUNTIME_DIRNAME "runtime"
#endif
/*
* RUNTIME_GLOBAL Directory name for global Vim runtime directory.
* Don't define this if the preprocessor can't handle
* string concatenation.
* Also set by "--with-global-runtime" configure argument.
*/
/* #define RUNTIME_GLOBAL "/etc/vim" */
/*
* MODIFIED_BY Name of who modified Vim. Required when distributing
* a modifed version of Vim.
* Also from the "--with-modified-by" configure argument.
*/
/* #define MODIFIED_BY "John Doe" */
/*
* Machine dependent:
* ==================
*/
/*
* +fork Unix only: fork() support (detected by configure)
* +system Use system() instead of fork/exec for starting a
* shell. Doesn't work for the GUI!
*/
/* #define USE_SYSTEM */
/*
* +X11 Unix only. Include code for xterm title saving and X
* clipboard. Only works if HAVE_X11 is also defined.
*/
#if (defined(FEAT_NORMAL) || defined(FEAT_GUI_MOTIF) || defined(FEAT_GUI_ATHENA))
# define WANT_X11
#endif
/*
* XSMP - X11 Session Management Protocol
* It may be preferred to disable this if the GUI supports it (e.g.,
* GNOME/KDE) and implement save-yourself etc. through that, but it may also
* be cleaner to have all SM-aware vims do the same thing (libSM does not
* depend upon X11).
* If your GUI wants to support SM itself, change this ifdef.
* I'm assuming that any X11 implementation will cope with this for now.
*/
#if defined(HAVE_X11) && defined(WANT_X11) && defined(HAVE_X11_SM_SMLIB_H)
# define USE_XSMP
#endif
#if defined(USE_XSMP_INTERACT) && !defined(USE_XSMP)
# undef USE_XSMP_INTERACT
#endif
/*
* +mouse_xterm Unix only: Include code for xterm mouse handling.
* +mouse_dec idem, for Dec mouse handling.
* +mouse_jsbterm idem, for Jsbterm mouse handling.
* +mouse_netterm idem, for Netterm mouse handling.
* (none) MS-DOS mouse support.
* +mouse_gpm Unix only: Include code for Linux console mouse
* handling.
* +mouse_pterm PTerm mouse support for QNX
* +mouse Any mouse support (any of the above enabled).
*/
/* OS/2 and Amiga console have no mouse support */
#if !defined(AMIGA) && !defined(OS2)
# ifdef FEAT_NORMAL
# define FEAT_MOUSE_XTERM
# endif
# ifdef FEAT_BIG
# define FEAT_MOUSE_NET
# endif
# ifdef FEAT_BIG
# define FEAT_MOUSE_DEC
# endif
# if defined(FEAT_NORMAL) && (defined(MSDOS) || defined(WIN3264))
# define DOS_MOUSE
# endif
# if defined(FEAT_NORMAL) && defined(__QNX__)
# define FEAT_MOUSE_PTERM
# endif
#endif
#if defined(FEAT_NORMAL) && defined(HAVE_GPM)
# define FEAT_MOUSE_GPM
#endif
/* Define FEAT_MOUSE when any of the above is defined or FEAT_GUI. */
#if !defined(FEAT_MOUSE_TTY) && (defined(FEAT_MOUSE_XTERM) \
|| defined(FEAT_MOUSE_NET) || defined(FEAT_MOUSE_DEC) \
|| defined(DOS_MOUSE) || defined(FEAT_MOUSE_GPM) \
|| defined(FEAT_MOUSE_JSB) || defined(FEAT_MOUSE_PTERM))
# define FEAT_MOUSE_TTY /* include non-GUI mouse support */
#endif
#if !defined(FEAT_MOUSE) && (defined(FEAT_MOUSE_TTY) || defined(FEAT_GUI))
# define FEAT_MOUSE /* include generic mouse support */
#endif
/*
* +clipboard Clipboard support. Always used for the GUI.
* +xterm_clipboard Unix only: Include code for handling the clipboard
* in an xterm like in the GUI.
*/
#ifdef FEAT_GUI
# ifndef FEAT_CLIPBOARD
# define FEAT_CLIPBOARD
# ifndef FEAT_VISUAL
# define FEAT_VISUAL
# endif
# endif
#endif
#if defined(FEAT_NORMAL) && defined(FEAT_VISUAL) \
&& (defined(UNIX) || defined(VMS)) \
&& defined(WANT_X11) && defined(HAVE_X11)
# define FEAT_XCLIPBOARD
# ifndef FEAT_CLIPBOARD
# define FEAT_CLIPBOARD
# endif
#endif
#if defined(FEAT_NORMAL) && defined(FEAT_VISUAL) \
&& defined(PLAN9)
# define FEAT_CLIPBOARD
#endif
/*
* +dnd Drag'n'drop support. Always used for the GTK+ GUI.
*/
#if defined(FEAT_CLIPBOARD) && defined(FEAT_GUI_GTK)
# define FEAT_DND
#endif
#if defined(FEAT_GUI_MSWIN) && defined(FEAT_SMALL)
# define MSWIN_FIND_REPLACE /* include code for find/replace dialog */
# define MSWIN_FR_BUFSIZE 256
#endif
#if defined(FEAT_GUI_GTK) || defined(FEAT_GUI_MOTIF) \
|| defined(MSWIN_FIND_REPLACE)
# define FIND_REPLACE_DIALOG 1
#endif
/*
* +clientserver Remote control via the remote_send() function
* and the --remote argument
*/
#if (defined(WIN32) || defined(FEAT_XCLIPBOARD)) && defined(FEAT_EVAL)
# define FEAT_CLIENTSERVER
#endif
/*
* +termresponse send t_RV to obtain terminal response. Used for xterm
* to check if mouse dragging can be used and if term
* codes can be obtained.
*/
#if (defined(FEAT_NORMAL) || defined(FEAT_MOUSE)) && defined(HAVE_TGETENT)
# define FEAT_TERMRESPONSE
#endif
/*
* cursor shape Adjust the shape of the cursor to the mode.
* mouse shape Adjust the shape of the mouse pointer to the mode.
*/
#ifdef FEAT_NORMAL
/* MS-DOS console and Win32 console can change cursor shape */
# if defined(MSDOS) || (defined(WIN3264) && !defined(FEAT_GUI_W32))
# define MCH_CURSOR_SHAPE
# endif
# if defined(FEAT_GUI_W32) || defined(FEAT_GUI_W16) || defined(FEAT_GUI_MOTIF) \
|| defined(FEAT_GUI_ATHENA) || defined(FEAT_GUI_GTK) \
|| defined(FEAT_GUI_PHOTON)
# define FEAT_MOUSESHAPE
# endif
#endif
/* GUI and some consoles can change the shape of the cursor. The code is also
* needed for the 'mouseshape' option. */
#if defined(FEAT_GUI) || defined(MCH_CURSOR_SHAPE) || defined(FEAT_MOUSESHAPE) \
|| (defined(UNIX) && defined(FEAT_NORMAL))
# define CURSOR_SHAPE
#endif
#if defined(FEAT_MZSCHEME) && (defined(FEAT_GUI_W32) || defined(FEAT_GUI_GTK) \
|| defined(FEAT_GUI_MOTIF) || defined(FEAT_GUI_ATHENA) \
|| defined(FEAT_GUI_MAC))
# define MZSCHEME_GUI_THREADS
#endif
/*
* +ARP Amiga only. Use arp.library, DOS 2.0 is not required.
*/
#if !defined(NO_ARP) && !defined(__amigaos4__)
# define FEAT_ARP
#endif
/*
* +GUI_Athena To compile Vim with or without the GUI (gvim) you have
* +GUI_Motif to edit the Makefile.
*/
/*
* +ole Win32 OLE automation: Use Makefile.ovc.
*/
/*
* These features can only be included by using a configure argument. See the
* Makefile for a line to uncomment.
* +mzscheme MzScheme interface: "--enable-mzscheme"
* +perl Perl interface: "--enable-perlinterp"
* +python Python interface: "--enable-pythoninterp"
* +tcl TCL interface: "--enable-tclinterp"
* +sniff Sniff interface: "--enable-sniff"
* +sun_workshop Sun Workshop integration
* +netbeans_intg Netbeans integration
*/
/*
* These features are automatically detected:
* +terminfo
* +tgetent
*/
/*
* The Sun Workshop features currently only work with Motif.
*/
#if !defined(FEAT_GUI_MOTIF) && defined(FEAT_SUN_WORKSHOP)
# undef FEAT_SUN_WORKSHOP
#endif
/*
* The Netbeans features currently only work with Motif and GTK and Win32.
* It also requires +listcmds and +eval.
*/
#if ((!defined(FEAT_GUI_MOTIF) && !defined(FEAT_GUI_GTK) && !defined(FEAT_GUI_W32)) \
|| !defined(FEAT_LISTCMDS) || !defined(FEAT_EVAL)) \
&& defined(FEAT_NETBEANS_INTG)
# undef FEAT_NETBEANS_INTG
#endif
/*
* +signs Allow signs to be displayed to the left of text lines.
* Adds the ":sign" command.
*/
#if defined(FEAT_BIG) || defined(FEAT_SUN_WORKSHOP) \
|| defined(FEAT_NETBEANS_INTG)
# define FEAT_SIGNS
# if ((defined(FEAT_GUI_MOTIF) || defined(FEAT_GUI_ATHENA)) \
&& defined(HAVE_X11_XPM_H)) \
|| defined(FEAT_GUI_GTK) \
|| (defined(WIN32) && defined(FEAT_GUI))
# define FEAT_SIGN_ICONS
# endif
#endif
/*
* +balloon_eval Allow balloon expression evaluation. Used with a
* debugger and for tooltips.
* Only for GUIs where it was implemented.
*/
#if (defined(FEAT_GUI_MOTIF) || defined(FEAT_GUI_ATHENA) \
|| defined(FEAT_GUI_GTK) || defined(FEAT_GUI_W32)) \
&& ( ((defined(FEAT_TOOLBAR) || defined(FEAT_GUI_TABLINE)) \
&& !defined(FEAT_GUI_GTK) && !defined(FEAT_GUI_W32)) \
|| defined(FEAT_SUN_WORKSHOP) \
|| defined(FEAT_NETBEANS_INTG) || defined(FEAT_EVAL))
# define FEAT_BEVAL
# if !defined(FEAT_XFONTSET) && !defined(FEAT_GUI_GTK) \
&& !defined(FEAT_GUI_W32)
# define FEAT_XFONTSET
# endif
#endif
#if defined(FEAT_BEVAL) && (defined(FEAT_GUI_MOTIF) || defined(FEAT_GUI_ATHENA))
# define FEAT_BEVAL_TIP /* balloon eval used for toolbar tooltip */
#endif
/* both Motif and Athena are X11 and share some code */
#if defined(FEAT_GUI_MOTIF) || defined(FEAT_GUI_ATHENA)
# define FEAT_GUI_X11
#endif
#if defined(FEAT_SUN_WORKSHOP) || defined(FEAT_NETBEANS_INTG)
/*
* The following features are (currently) only used by Sun Visual WorkShop 6
* and NetBeans. These features could be used with other integrations with
* debuggers so I've used separate feature defines.
*/
# if !defined(FEAT_MENU)
# define FEAT_MENU
# endif
#endif
#if defined(FEAT_SUN_WORKSHOP)
/*
* Use an alternative method of X input for a secondary
* command input.
*/
# define ALT_X_INPUT
/*
* +footer Motif only: Add a message area at the bottom of the
* main window area.
*/
# define FEAT_FOOTER
#endif
/*
* +autochdir 'autochdir' option.
*/
#if defined(FEAT_SUN_WORKSHOP) || defined(FEAT_NETBEANS_INTG) \
|| defined(FEAT_BIG)
# define FEAT_AUTOCHDIR
#endif