ref: 98ef4df54174ec5488d697d9c0a8a0b0cda41aaa
dir: /plugins/audacity/audacity-nyquist.diff/
--- audacity-1.2.1.orig/nyquist/misc.lsp
+++ audacity-1.2.1/nyquist/misc.lsp
@@ -74,19 +74,3 @@
(setf fullpath ":")))
fullpath)
(t nil))))
-
-;; real-random -- pick a random real from a range
-;;
-(defun real-random (from to)
- (cond ((= from to) from)
- (t
- (+ from
- (* (random 10000)
- 0.0001
- (- to from))))))
-
-;; power -- raise a number to some power x^y
-;;
-(defun power (x y)
- (exp (* (log (float x)) y)))
-
--- audacity-1.2.1.orig/nyquist/nyinit.lsp
+++ audacity-1.2.1/nyquist/nyinit.lsp
@@ -26,7 +26,7 @@
(setf *WATCH* NIL)
(format t "~%Nyquist -- A Language for Sound Synthesis and Composition~%")
-(format t " Copyright (c) 1991-2003 by Roger B. Dannenberg~%")
+(format t " Copyright (c) 1991,1992,1995 by Roger B. Dannenberg~%")
(format t " Version 2.29~%~%")
(setf *gc-flag* t)
--- audacity-1.2.1.orig/nyquist/nyquist.lsp
+++ audacity-1.2.1/nyquist/nyquist.lsp
@@ -6,10 +6,7 @@
;;; ###########################################################
;;;
-;;;
-;;; Modifications for using Nyquist within Audacity
-;;; by Dominic Mazzoni
-;;;
+(load "fileio.lsp")
(prog ()
(setq lppp -12.0) (setq lpp -9.0) (setq lp -6.0) (setq lmp -3.0)
@@ -217,7 +214,7 @@
(cond ((> hz (/ *SOUND-SRATE* 2))
(format t "Warning: buzz nominal frequency (~A hz) will alias at current sample rate (~A hz).\n"
hz *SOUND-SRATE*)))
- (setf n (min n 1)) ; avoid divide by zero problem
+ (setf n (max n 1)) ; avoid divide by zero problem
(scale-db (get-loud)
(snd-buzz n ; number of harmonics
*SOUND-SRATE* ; output sample rate
@@ -344,6 +341,7 @@
d ; duration
phase))) ; phase
+
;; FMLFO -- like LFO but uses frequency modulation
;;
(defun fmlfo (freq &optional (sound *SINE-TABLE*) (phase 0.0))
@@ -358,6 +356,7 @@
(t
(error "frequency must be a number or sound")))))
+
;; OSC - table lookup oscillator
;;
(defun osc (pitch &optional (duration 1.0)
@@ -761,6 +760,51 @@
,s))
+;; COMPUTE-DEFAULT-SOUND-FILE -- construct and set *default-sound-file*
+;;
+;; (this is harder than it might seem because the default place for
+;; sound files is in /tmp, which is shared by users, so we'd like to
+;; use a user-specific name to avoid collisions)
+;;
+(defun compute-default-sound-file ()
+ (let (inf user extension)
+ ; the reason for the user name is that if UserA creates a temp file,
+ ; then UserB will not be able to overwrite it. The user name is a
+ ; way to give each user a unique temp file name. Note that we don't
+ ; want each session to generate a unique name because Nyquist doesn't
+ ; delete the sound file at the end of the session.
+ (system "echo $USER > ny_username.tmp")
+ (setf inf (open "ny_username.tmp"))
+ (cond (inf
+ (setf user (read inf))
+ (close inf)
+ (system "rm ny_username.tmp"))
+ (t ; must not be unix, make up a generic name
+ (setf user 'nyquist)))
+ (cond ((null user)
+ (format t
+"Please type your user-id so that I can construct a default
+sound-file name. To avoid this message in the future, add
+this to your .login file:
+ setenv USER <your id here>
+or add this to your init.lsp file:
+ (setf *default-sound-file* \"<your filename here>\")
+ (setf *default-sf-dir* \"<full pathname of desired directory here>\")
+
+Your id please: ")
+ (setf user (read))))
+ ; now compute the extension based on *default-sf-format*
+ (cond ((= *default-sf-format* snd-head-AIFF)
+ (setf extension ".aif"))
+ ((= *default-sf-format* snd-head-Wave)
+ (setf extension ".wav"))
+ (t
+ (setf extension ".snd")))
+ (setf *default-sound-file*
+ (strcat (string-downcase (symbol-name user)) "-temp" extension))
+ (format t "Default sound file is ~A.~%" *default-sound-file*)))
+
+
;; CONTROL-WARP -- apply a warp function to a control function
;;
(defun control-warp (warp-fn control &optional wrate)
@@ -792,6 +836,9 @@
(snd-srate sound)
(local-to-global 0) *START* *STOP* (db-to-linear (get-loud))))
+; (s-plot (progv '(*TIME* *START*)'(0.0 0.5)(cue (snd-sine 20 1 100 1)))1000)
+;(s-plot(progv'(*TIME* *START*)'(0.0 0.5)(cue(cue (snd-sine 20 1 100 1))))1000)
+
;; (sound sound)
;; Same as (cue sound), except also warps the sound.
;; Note that the *WARP* can change the pitch of the
@@ -861,6 +908,13 @@
(setfn control sound)
+;; (cue-file string)
+;; Loads a sound file with the given name, returning a sound which is
+;; transformed to the current environment.
+;(defun cue-file (name)
+; (cue (snd-load name *SOUND-SRATE*)))
+
+
;; (env t1 t2 t4 l1 l2 l3 &optional duration)
;; Creates a 4-phase envelope.
;; tN is the duration of phase N, and lN is the final level of
@@ -1327,6 +1381,54 @@
;
(load "seq" :verbose NIL)
+;(defmacro with%environment (env &rest expr)
+; `(progv ',*environment-variables* ',env ,@expr))
+;
+;(defmacro seq (&rest list)
+; (display "seq" list)
+; (cond ((null list)
+; (snd-zero *time* *sound-srate*))
+; ((null (cdr list))
+; (car list))
+; ((null (cddr list))
+; `(let* ((first%sound ,(car list))
+; (s%rate (snd-srate first%sound)))
+; (snd-seq first%sound
+; #'(lambda (t0)
+; (with%environment
+; ,(the%environment) (setf *time* t0)
+; (force-srate s%rate ,(cadr list)))))))
+; (t
+; `(let* ((first%sound ,(car list))
+; (s%rate (snd-srate first%sound)))
+; (snd-seq first%sound
+; #'(lambda (t0)
+; (format t "snd-seq applying lambda")
+; (with%environment
+; ,(the%environment) (setf *time* t0)
+; (seq (force-srate s%rate ,(cadr list))
+; ,@(cddr list))))) ))))
+;
+;
+;(defmacro seqrep (pair sound)
+; `(let ((,(car pair) 0)
+; ($loop-count (1- ,(cadr pair))))
+; (cond ((< 0 $loop-count)
+; (seqrep2 ,(car pair) ,sound))
+; ((= 0 $loop-count)
+; ,sound)
+; (t
+; (snd-zero *time* *sound-srate*)))))
+;
+;
+;(defmacro seqrep2 (var sound)
+; `(cond ((< ,var $loop-count)
+; (seq (prog1 ,sound (setf ,var (1+ ,var)))
+; (seqrep2 ,var ,sound)))
+; ((= ,var $loop-count)
+; ,sound)))
+
+
; set-logical-stop - modify the sound and return it, time is shifted and
; stretched
(defun set-logical-stop (snd tim)
@@ -1532,4 +1634,4 @@
(defun osc-pulse (hz bias &optional (compare-shape *step-shape*))
(compare bias (osc-tri hz) compare-shape))
-(setf NY:ALL 1000000000)
+
--- audacity-1.2.1.orig/nyquist/seq.lsp
+++ audacity-1.2.1/nyquist/seq.lsp
@@ -176,21 +176,18 @@
(error (format nil "Negative stretch factor in TIMED-SEQ: ~A" event)))
(t
(setf start-time (car event)))))
- (cond ((null score) (s-rest 0))
- (t
- (at (caar score)
- (seqrep (i (length score))
- (cond ((cdr score)
- (let (event)
- (prog1
- (set-logical-stop
- (stretch (cadar score)
- (setf event (eval (caddar score))))
- (- (caadr score) (caar score)))
-; (display "timed-seq" (caddar score) (local-to-global 0))
- (setf score (cdr score)))))
- (t
- (stretch (cadar score) (eval (caddar score)))))))))))
+ (at (caar score)
+ (seqrep (i (length score))
+ (cond ((cdr score)
+ (let (event)
+ (prog1
+ (set-logical-stop (stretch (cadar score)
+ (setf event (eval (caddar score))))
+ (- (caadr score) (caar score)))
+; (display "timed-seq" (caddar score) (local-to-global 0))
+ (setf score (cdr score)))))
+ (t
+ (stretch (cadar score) (eval (caddar score)))))))))
--- audacity-1.2.1.orig/nyquist/system.lsp
+++ audacity-1.2.1/nyquist/system.lsp
@@ -1,23 +1,18 @@
-; system.lsp -- machine/system-dependent definitions
+;; system.lsp -- system-dependent lisp code
-;; default behavior is to call SETUP-CONSOLE to get large white typescript
-;;
-;; set *setup-console* to nil in your personal init.lsp to override this behavior
-;; (this may be necessary to work with emacs)
-;;
-(if (not (boundp '*setup-console*)) (setf *setup-console* t))
-(if *setup-console* (setup-console))
+; local definition for play
+; this one is for Linux:
(setf ny:bigendianp nil)
(if (not (boundp '*default-sf-format*))
- (setf *default-sf-format* snd-head-Wave))
+ (setf *default-sf-format* snd-head-wave))
-;(if (not (boundp '*default-sound-file*))
-; (setf *default-sound-file* "temp.wav"))
+(if (not (boundp '*default-sound-file*))
+ (compute-default-sound-file))
-;(if (not (boundp '*default-sf-dir*))
-; (setf *default-sf-dir* ""))
+(if (not (boundp '*default-sf-dir*))
+ (setf *default-sf-dir* "./"))
(if (not (boundp '*default-sf-mode*))
(setf *default-sf-mode* snd-head-mode-pcm))
@@ -25,25 +20,8 @@
(if (not (boundp '*default-sf-bits*))
(setf *default-sf-bits* 16))
-;(if (not (boundp '*default-plot-file*))
-; (setf *default-plot-file* "points.dat"))
-
-;(if (not (boundp '*plotscript-file*))
-; (setf *plotscript-file* "sys/unix/rs6k/plotscript"))
-
-; local definition for play
-;(defmacro play (expr)
-; `(s-save-autonorm ,expr NY:ALL *default-sound-file* :play *soundenable*))
-
-
-;(defun r ()
-; (s-save (s-read *default-sound-file*) NY:ALL "" :play t)
-;)
-
-
-; PLAY-FILE -- play a file
-;(defun play-file (name)
-; (s-save (s-read name) NY:ALL "" :play t))
+(if (not (boundp '*default-plot-file*))
+ (setf *default-plot-file* "points.dat"))
; FULL-NAME-P -- test if file name is a full path or relative path
@@ -51,67 +29,52 @@
; (otherwise the *default-sf-dir* will be prepended
;
(defun full-name-p (filename)
- (or (eq (char filename 0) #\\)
- (eq (char filename 0) #\.)
- (and (> (length filename) 2)
- (both-case-p (char filename 0))
- (equal (char filename 1) #\:))))
+ (or (eq (char filename 0) #\/)
+ (eq (char filename 0) #\.)))
-(setf *file-separator* #\\)
-;(defun ny:load-file () (load "*.*"))
-;(defun ny:reload-file () (load "*"))
+(setf *file-separator* #\/)
-; save the standard function to write points to a file
-;
-;(setfn s-plot-points s-plot)
+;; PLAY-FILE - play a sound file
+;;
+(defun play-file (name)
+;; (system (strcat "sndplay " (soundfilename name))))
+ (system (strcat "play " (soundfilename name) )))
+
+;; R - replay last file written with PLAY
+(defun r () (play-file *default-sound-file*))
+
+;;;; use this old version if you want to use sndplay to play
+;;;; the result file rather than play the samples as they
+;;;; are computed. This version does not autonormalize.
+;; PLAY - write value of an expression to file and play it
+;;
+;(defmacro play (expr)
+; `(prog (specs)
+; (setf specs (s-save (force-srate *sound-srate* ,expr)
+; 1000000000 *default-sound-file*))
+; (r)))
+;;;;
-;(defun array-max-abs (points)
-; (let ((m 0.0))
-; (dotimes (i (length points))
-; (setf m (max m (abs (aref points i)))))
-; m))
-
-;(setf graph-width 600)
-;(setf graph-height 220)
-
-;(defun s-plot (snd &optional (n 600))
-; (show-graphics)
-; (clear-graphics)
-; (cond ((soundp snd)
-; (s-plot-2 snd n (/ graph-height 2) graph-height))
-; (t
-; (let ((gh (/ graph-height (length snd)))
-; hs)
-; (dotimes (i (length snd))
-; (setf hs (s-plot-2 (aref snd i) n (+ (/ gh 2) (* i gh)) gh hs)))))))
-;
-;
-;(defun s-plot-2 (snd n y-offset graph-height horizontal-scale)
-; (prog ((points (snd-samples snd n))
-; maxpoint horizontal-scale vertical-scale)
-; (setf maxpoint (array-max-abs points))
-; (moveto 0 y-offset)
-; (lineto graph-width y-offset)
-; (moveto 0 y-offset)
-; (cond ((null horizontal-scale)
-; (setf horizontal-scale (/ (float graph-width) (length points)))))
-; (setf vertical-scale (- (/ (float graph-height) 2 maxpoint)))
-; (dotimes (i (length points))
-; (lineto (truncate (* horizontal-scale i))
-; (+ y-offset (truncate (* vertical-scale (aref points i))))))
-; (format t "X Axis: ~A to ~A (seconds)\n" (snd-t0 snd) (/ (length points) (snd-srate snd)))
-; (format t "Y Axis: ~A to ~A\n" (- maxpoint) maxpoint)
-; (format t "~A samples plotted.\n" (length points))
-; (return horizontal-scale)
-; ))
-;
-; S-EDIT - run the audio editor on a sound
-;
-;(defmacro s-edit (&optional expr)
-; `(prog ()
-; (if ,expr (s-save ,expr 1000000000 *default-sound-file*))
-; (system (format nil "audio_editor ~A &"
-; (soundfilename *default-sound-file*)))))
+; local definition for play
+(defmacro play (expr)
+ `(s-save-autonorm ,expr NY:ALL *default-sound-file* :play *soundenable*))
+
+;; for Linux, modify s-plot (defined in nyquist.lsp) by saving s-plot
+;; in standard-s-plot, then call gnuplot to display the points.
+;;
+;; we also need to save the location of this file so we can find
+;; nyquist-plot.txt, the command file for gnuplot
+;;
+(setf *runtime-path* (current-path))
+(display "system.lsp" *runtime-path*)
+
+(setfn standard-s-plot s-plot)
+
+(defun s-plot (s)
+ (let (plot-file)
+ (standard-s-plot s) ;; this calculates the data points
+ (setf plot-file (strcat *runtime-path* "nyquist-plot.txt"))
+ (system (strcat "gnuplot -persist " plot-file))))
--- audacity-1.2.1.orig/nyquist/fileio.lsp
+++ audacity-1.2.1/nyquist/fileio.lsp
@@ -0,0 +1,204 @@
+;; s-save -- saves a file
+(setf NY:ALL 1000000000) ; 1GIG constant for maxlen
+(defmacro s-save (expression &optional (maxlen NY:ALL) filename
+ &key (format '*default-sf-format*)
+ (mode '*default-sf-mode*) (bits '*default-sf-bits*)
+ (endian NIL) ; nil, :big, or :little -- specifies file format
+ (play nil))
+ `(let ((ny:fname ,filename)
+ (ny:maxlen ,maxlen)
+ (ny:endian ,endian)
+ (ny:swap 0))
+ ; allow caller to omit maxlen, in which case the filename will
+ ; be a string in the maxlen parameter position and filename will be null
+ (cond ((null ny:fname)
+ (cond ((stringp ny:maxlen)
+ (setf ny:fname ny:maxlen)
+ (setf ny:maxlen NY:ALL))
+ (t
+ (setf ny:fname *default-sound-file*)))))
+
+ (cond ((equal ny:fname "")
+ (cond ((not ,play)
+ (format t "s-save: no file to write! play option is off!\n"))))
+ (t
+ (setf ny:fname (soundfilename ny:fname))
+ (format t "Saving sound file to ~A~%" ny:fname)))
+ (cond ((eq ny:endian :big)
+ (setf ny:swap (if ny:bigendianp 0 1)))
+ ((eq ny:endian :little)
+ (setf ny:swap (if ny:bigendianp 1 0))))
+ (snd-save ',expression ny:maxlen ny:fname ,format ,mode ,bits ny:swap ,play)))
+
+(defmacro s-save-autonorm (expression &rest arglist)
+ `(let ((peak (s-save (scale *autonorm* ,expression) ,@arglist)))
+ (autonorm-update peak)))
+
+;; The "AutoNorm" facility: when you play something, the Nyquist play
+;; command will automatically compute what normalization factor you
+;; should have used. If you play the same thing again, the normalization
+;; factor is automatically applied.
+;;
+;; Call AUTONORM-OFF to turn off this feature, and AUTONORM-ON to turn
+;; it back on.
+;;
+;; *autonorm-target* is the peak value we're aiming for (it's set below 1
+;; so allow the next signal to get slightly louder without clipping)
+;;
+(setf *autonorm-target* 0.9)
+
+(defun autonorm-on ()
+ (setf *autonorm* 1.0)
+ (setf *autonorm-previous-peak* 1.0)
+ (setf *autonormflag* t)
+ (format t "AutoNorm feature is on.~%"))
+
+(if (not (boundp '*autonormflag*)) (autonorm-on))
+
+(defun autonorm-off ()
+ (setf *autonormflag* nil)
+ (setf *autonorm* 1.0)
+ (format t "AutoNorm feature is off.~%"))
+
+(defun autonorm-update (peak)
+ (cond ((and *autonormflag* (> peak 0.0))
+ (setf *autonorm-previous-peak* (/ peak *autonorm*))
+ (setf *autonorm* (/ *autonorm-target* *autonorm-previous-peak*))
+ (format t "AutoNorm: peak was ~A,~%" *autonorm-previous-peak*)
+ (format t " peak after normalization was ~A,~%" peak)
+ (format t " new normalization factor is ~A~%" *autonorm*)
+ *autonorm-previous-peak*
+ )
+ (t peak)
+ ))
+
+;; s-read -- reads a file
+(defun s-read (filename &key (time-offset 0) (srate *sound-srate*)
+ (dur 10000.0) (nchans 1) (format *default-sf-format*)
+ (mode *default-sf-mode*) (bits *default-sf-bits*) (endian NIL))
+ (let ((swap 0))
+ (cond ((eq endian :big)
+ (setf swap (if ny:bigendianp 0 1)))
+ ((eq endian :little)
+ (setf swap (if ny:bigendianp 1 0))))
+ (snd-read (soundfilename filename) time-offset
+ (local-to-global 0) format nchans mode bits swap srate
+ dur)))
+
+;; SF-INFO -- print sound file info
+;;
+(defun sf-info (filename)
+ (let (s format channels mode bits srate dur flags)
+ (format t "~A:~%" (soundfilename filename))
+ (setf s (s-read filename))
+ (setf format (car *rslt*))
+ (setf channels (cadr *rslt*))
+ (setf mode (caddr *rslt*))
+ (setf bits (cadddr *rslt*))
+ (setf *rslt* (cddddr *rslt*))
+ (setf srate (car *rslt*))
+ (setf dur (cadr *rslt*))
+ (setf flags (caddr *rslt*))
+ (format t "Format: ~A~%"
+ (nth format '("none" "AIFF" "IRCAM" "NeXT" "Wave")))
+ (cond ((setp (logand flags snd-head-channels))
+ (format t "Channels: ~A~%" channels)))
+ (cond ((setp (logand flags snd-head-mode))
+ (format t "Mode: ~A~%"
+ (nth mode '("ADPCM" "PCM" "uLaw" "aLaw" "Float" "UPCM")))))
+ (cond ((setp (logand flags snd-head-bits))
+ (format t "Bits/Sample: ~A~%" bits)))
+ (cond ((setp (logand flags snd-head-srate))
+ (format t "SampleRate: ~A~%" srate)))
+ (cond ((setp (logand flags snd-head-dur))
+ (format t "Duration: ~A~%" dur)))
+ ))
+
+;; SETP -- tests whether a bit is set (non-zero)
+;
+(defun setp (bits) (not (zerop bits)))
+
+;; SOUNDFILENAME -- add default directory to name to get filename
+;;
+(defun soundfilename (filename)
+ (cond ((= 0 (length filename))
+ (break "filename must be at least one character long" filename))
+ ((full-name-p filename))
+ (t
+ ; if sf-dir nonempty and does not end with filename separator,
+ ; append one
+ (cond ((and (< 0 (length *default-sf-dir*))
+ (not (eq (char *default-sf-dir*
+ (1- (length *default-sf-dir*)))
+ *file-separator*)))
+ (setf *default-sf-dir* (strcat *default-sf-dir* (string *file-separator*)))
+ (format t "Warning: appending \"~A\" to *default-sf-dir*~%"
+ *file-separator*)))
+ (setf filename (strcat *default-sf-dir* (string filename)))))
+ filename)
+
+
+(setfn s-read-format car)
+(setfn s-read-channels cadr)
+(setfn s-read-mode caddr)
+(setfn s-read-bits cadddr)
+(defun s-read-swap (rslt) (car (cddddr rslt)))
+(defun s-read-srate (rslt) (cadr (cddddr rslt)))
+(defun s-read-dur (rslt) (caddr (cddddr rslt)))
+(defun s-read-byte-offset (rslt) (car (cddddr (cddddr rslt))))
+(defun round (x) (truncate (+ 0.5 x)))
+
+;; change defaults for PLAY macro:
+(setf *soundenable* t)
+(defun sound-on () (setf *soundenable* t))
+(defun sound-off () (setf *soundenable* nil))
+
+(defmacro s-add-to (expr maxlen filename &optional time-offset)
+ `(let ((ny:fname (soundfilename ,filename))
+ ny:input ny:rslt ny:offset
+ )
+ (cond ((setf ny:input (s-read ny:fname :time-offset ,time-offset))
+ (setf ny:rslt *rslt*)
+ (format t "Adding sound to ~A at offset ~A~%"
+ ny:fname ,time-offset)
+ (setf ny:offset (s-read-byte-offset ny:rslt))
+
+ (snd-overwrite '(let ((ny:addend ,expr))
+ (sum (snd-coterm
+ (s-read ny:fname :time-offset ,time-offset)
+ ny:addend)
+ ny:addend))
+ ,maxlen ny:fname ny:offset
+ (s-read-mode ny:rslt) (s-read-bits ny:rslt)
+ (s-read-srate ny:rslt) (s-read-channels ny:rslt))
+ (format t "Duration written: ~A~%" (car *rslt*)))
+ ((setf ny:input (s-read ny:fname :time-offset 0))
+ (format t "Could not open ~A at time offset ~A~%"
+ ny:fname ,time-offset))
+ (t
+ (format t "Could not open ~A~%" ny:fname)))))
+
+
+(defmacro s-overwrite (expr maxlen filename &optional time-offset)
+ `(let ((ny:fname (soundfilename ,filename))
+ ny:input ny:rslt ny:offset)
+ (setf ny:offset ,time-offset)
+ (cond ((null ny:offset) (setf ny:offset 0)))
+ (cond ((setf ny:input (s-read ny:fname :time-offset ny:offset))
+ (setf ny:rslt *rslt*)
+ (format t "Overwriting ~A at offset ~A~%" ny:fname ny:offset)
+ (setf ny:offset (s-read-byte-offset ny:rslt))
+ (display "s-overwrite" ny:offset)
+ (snd-overwrite `,expr ,maxlen ny:fname ny:offset
+ (s-read-format ny:rslt)
+ (s-read-mode ny:rslt) (s-read-bits ny:rslt)
+ (s-read-swap ny:rslt)
+ (s-read-srate ny:rslt) (s-read-channels ny:rslt))
+ (format t "Duration written: ~A~%" (car *rslt*)))
+ ((s-read ny:fname :time-offset 0)
+ (format t "Could not open ~A at time offset ~A~%"
+ ny:fname ,time-offset))
+ (t
+ (format t "Could not open ~A~%" ny:fname)))))
+
+
--- audacity-1.2.1.orig/nyquist/nyquist-plot.txt
+++ audacity-1.2.1/nyquist/nyquist-plot.txt
@@ -0,0 +1,3 @@
+set nokey
+plot "points.dat" with lines
+