ref: d0e29420a6b872b5e5f2426066c99bcf877c5cbc
dir: /src/arm/64/looprestoration.S/
/* * Copyright © 2018, VideoLAN and dav1d authors * Copyright © 2018, Martin Storsjo * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include "src/arm/asm.S" #include "util.S" // void dav1d_wiener_filter_h_neon(int16_t *dst, const pixel (*left)[4], // const pixel *src, ptrdiff_t stride, // const int16_t fh[7], const intptr_t w, // int h, enum LrEdgeFlags edges); function wiener_filter_h_neon, export=1 mov w8, w5 ld1 {v0.8h}, [x4] mov w9, #(1 << 14) - (1 << 2) dup v30.8h, w9 movi v31.8h, #8, lsl #8 // Calculate mid_stride add w10, w5, #7 bic w10, w10, #7 lsl w10, w10, #1 // Clear the last unused element of v0, to allow filtering a single // pixel with one plain mul+addv. ins v0.h[7], wzr // Set up pointers for reading/writing alternate rows add x12, x0, x10 lsl w10, w10, #1 add x13, x2, x3 lsl x3, x3, #1 // Subtract the width from mid_stride sub x10, x10, w5, uxtw #1 // For w >= 8, we read (w+5)&~7+8 pixels, for w < 8 we read 16 pixels. cmp w5, #8 add w11, w5, #13 bic w11, w11, #7 b.ge 1f mov w11, #16 1: sub x3, x3, w11, uxtw // Set up the src pointers to include the left edge, for LR_HAVE_LEFT, left == NULL tst w7, #1 // LR_HAVE_LEFT b.eq 2f // LR_HAVE_LEFT cbnz x1, 0f // left == NULL sub x2, x2, #3 sub x13, x13, #3 b 1f 0: // LR_HAVE_LEFT, left != NULL 2: // !LR_HAVE_LEFT, increase the stride. // For this case we don't read the left 3 pixels from the src pointer, // but shift it as if we had done that. add x3, x3, #3 1: // Loop vertically ld1 {v3.16b}, [x2], #16 ld1 {v5.16b}, [x13], #16 tst w7, #1 // LR_HAVE_LEFT b.eq 0f cbz x1, 2f // LR_HAVE_LEFT, left != NULL ld1 {v2.s}[3], [x1], #4 // Move x2/x13 back to account for the last 3 bytes we loaded earlier, // which we'll shift out. sub x2, x2, #3 sub x13, x13, #3 ld1 {v4.s}[3], [x1], #4 ext v3.16b, v2.16b, v3.16b, #13 ext v5.16b, v4.16b, v5.16b, #13 b 2f 0: // !LR_HAVE_LEFT, fill v2 with the leftmost byte // and shift v3 to have 3x the first byte at the front. dup v2.16b, v3.b[0] dup v4.16b, v5.b[0] // Move x2 back to account for the last 3 bytes we loaded before, // which we shifted out. sub x2, x2, #3 sub x13, x13, #3 ext v3.16b, v2.16b, v3.16b, #13 ext v5.16b, v4.16b, v5.16b, #13 2: uxtl v2.8h, v3.8b uxtl2 v3.8h, v3.16b uxtl v4.8h, v5.8b uxtl2 v5.8h, v5.16b tst w7, #2 // LR_HAVE_RIGHT b.ne 4f // If we'll need to pad the right edge, load that byte to pad with // here since we can find it pretty easily from here. sub w9, w5, #14 ldr b28, [x2, w9, sxtw] ldr b29, [x13, w9, sxtw] // Fill v28/v29 with the right padding pixel dup v28.8b, v28.b[0] dup v29.8b, v29.b[0] uxtl v28.8h, v28.8b uxtl v29.8h, v29.8b 3: // !LR_HAVE_RIGHT // If we'll have to pad the right edge we need to quit early here. cmp w5, #11 b.ge 4f // If w >= 11, all used input pixels are valid cmp w5, #7 b.ge 5f // If w >= 7, we can filter 4 pixels b 6f 4: // Loop horizontally .macro filter wd // Interleaving the mul/mla chains actually hurts performance // significantly on Cortex A53, thus keeping mul/mla tightly // chained like this. ext v16.16b, v2.16b, v3.16b, #2 ext v17.16b, v2.16b, v3.16b, #4 ext v18.16b, v2.16b, v3.16b, #6 ext v19.16b, v2.16b, v3.16b, #8 ext v20.16b, v2.16b, v3.16b, #10 ext v21.16b, v2.16b, v3.16b, #12 mul v6\wd, v2\wd, v0.h[0] mla v6\wd, v16\wd, v0.h[1] mla v6\wd, v17\wd, v0.h[2] mla v6\wd, v18\wd, v0.h[3] mla v6\wd, v19\wd, v0.h[4] mla v6\wd, v20\wd, v0.h[5] mla v6\wd, v21\wd, v0.h[6] ext v22.16b, v4.16b, v5.16b, #2 ext v23.16b, v4.16b, v5.16b, #4 ext v24.16b, v4.16b, v5.16b, #6 ext v25.16b, v4.16b, v5.16b, #8 ext v26.16b, v4.16b, v5.16b, #10 ext v27.16b, v4.16b, v5.16b, #12 mul v7\wd, v4\wd, v0.h[0] mla v7\wd, v22\wd, v0.h[1] mla v7\wd, v23\wd, v0.h[2] mla v7\wd, v24\wd, v0.h[3] mla v7\wd, v25\wd, v0.h[4] mla v7\wd, v26\wd, v0.h[5] mla v7\wd, v27\wd, v0.h[6] shl v18\wd, v18\wd, #7 shl v24\wd, v24\wd, #7 sub v18\wd, v18\wd, v30\wd sub v24\wd, v24\wd, v30\wd sqadd v6\wd, v6\wd, v18\wd sqadd v7\wd, v7\wd, v24\wd sshr v6\wd, v6\wd, #3 sshr v7\wd, v7\wd, #3 add v6\wd, v6\wd, v31\wd add v7\wd, v7\wd, v31\wd .endm filter .8h st1 {v6.8h}, [x0], #16 st1 {v7.8h}, [x12], #16 subs w5, w5, #8 b.le 9f tst w7, #2 // LR_HAVE_RIGHT mov v2.16b, v3.16b mov v4.16b, v5.16b ld1 {v3.8b}, [x2], #8 ld1 {v5.8b}, [x13], #8 uxtl v3.8h, v3.8b uxtl v5.8h, v5.8b b.ne 4b // If we don't need to pad, just keep filtering. b 3b // If we need to pad, check how many pixels we have left. 5: // Filter 4 pixels, 7 <= w < 11 filter .4h st1 {v6.4h}, [x0], #8 st1 {v7.4h}, [x12], #8 subs w5, w5, #4 // 3 <= w < 7 ext v2.16b, v2.16b, v3.16b, #8 ext v3.16b, v3.16b, v3.16b, #8 ext v4.16b, v4.16b, v5.16b, #8 ext v5.16b, v5.16b, v5.16b, #8 6: // Pad the right edge and filter the last few pixels. // w < 7, w+3 pixels valid in v2-v3 cmp w5, #5 b.lt 7f b.gt 8f // w == 5, 8 pixels valid in v2, v3 invalid mov v3.16b, v28.16b mov v5.16b, v29.16b b 88f 7: // 1 <= w < 5, 4-7 pixels valid in v2 sub w9, w5, #1 // w9 = (pixels valid - 4) adr x11, L(variable_shift_tbl) ldrh w9, [x11, w9, uxtw #1] sub x11, x11, w9, uxth mov v3.16b, v28.16b mov v5.16b, v29.16b br x11 44: // 4 pixels valid in v2/v4, fill the high half with padding. ins v2.d[1], v3.d[0] ins v4.d[1], v5.d[0] b 88f // Shift v2 right, shifting out invalid pixels, // shift v2 left to the original offset, shifting in padding pixels. 55: // 5 pixels valid ext v2.16b, v2.16b, v2.16b, #10 ext v2.16b, v2.16b, v3.16b, #6 ext v4.16b, v4.16b, v4.16b, #10 ext v4.16b, v4.16b, v5.16b, #6 b 88f 66: // 6 pixels valid, fill the upper 2 pixels with padding. ins v2.s[3], v3.s[0] ins v4.s[3], v5.s[0] b 88f 77: // 7 pixels valid, fill the last pixel with padding. ins v2.h[7], v3.h[0] ins v4.h[7], v5.h[0] b 88f L(variable_shift_tbl): .hword L(variable_shift_tbl) - 44b .hword L(variable_shift_tbl) - 55b .hword L(variable_shift_tbl) - 66b .hword L(variable_shift_tbl) - 77b 8: // w > 5, w == 6, 9 pixels valid in v2-v3, 1 pixel valid in v3 ins v28.h[0], v3.h[0] ins v29.h[0], v5.h[0] mov v3.16b, v28.16b mov v5.16b, v29.16b 88: // w < 7, v2-v3 padded properly cmp w5, #4 b.lt 888f // w >= 4, filter 4 pixels filter .4h st1 {v6.4h}, [x0], #8 st1 {v7.4h}, [x12], #8 subs w5, w5, #4 // 0 <= w < 4 ext v2.16b, v2.16b, v3.16b, #8 ext v4.16b, v4.16b, v5.16b, #8 b.eq 9f 888: // 1 <= w < 4, filter 1 pixel at a time mul v6.8h, v2.8h, v0.8h mul v7.8h, v4.8h, v0.8h addv h6, v6.8h addv h7, v7.8h dup v16.4h, v2.h[3] ins v16.h[1], v4.h[3] ins v6.h[1], v7.h[0] shl v16.4h, v16.4h, #7 sub v16.4h, v16.4h, v30.4h sqadd v6.4h, v6.4h, v16.4h sshr v6.4h, v6.4h, #3 add v6.4h, v6.4h, v31.4h st1 {v6.h}[0], [x0], #2 st1 {v6.h}[1], [x12], #2 subs w5, w5, #1 ext v2.16b, v2.16b, v3.16b, #2 ext v4.16b, v4.16b, v5.16b, #2 b.gt 888b 9: subs w6, w6, #2 b.le 0f // Jump to the next row and loop horizontally add x0, x0, x10 add x12, x12, x10 add x2, x2, x3 add x13, x13, x3 mov w5, w8 b 1b 0: ret .purgem filter endfunc // void dav1d_wiener_filter_v_neon(pixel *dst, ptrdiff_t stride, // const int16_t *mid, int w, int h, // const int16_t fv[7], enum LrEdgeFlags edges, // ptrdiff_t mid_stride); function wiener_filter_v_neon, export=1 mov w8, w4 ld1 {v0.8h}, [x5] movi v1.8h, #128 add v1.8h, v1.8h, v0.8h // Calculate the number of rows to move back when looping vertically mov w11, w4 tst w6, #4 // LR_HAVE_TOP b.eq 0f sub x2, x2, x7, lsl #1 add w11, w11, #2 0: tst w6, #8 // LR_HAVE_BOTTOM b.eq 1f add w11, w11, #2 1: // Start of horizontal loop; start one vertical filter slice. // Load rows into v16-v19 and pad properly. tst w6, #4 // LR_HAVE_TOP ld1 {v16.8h}, [x2], x7 b.eq 2f // LR_HAVE_TOP ld1 {v18.8h}, [x2], x7 mov v17.16b, v16.16b ld1 {v19.8h}, [x2], x7 b 3f 2: // !LR_HAVE_TOP mov v17.16b, v16.16b mov v18.16b, v16.16b mov v19.16b, v16.16b 3: cmp w4, #4 b.lt 5f // Start filtering normally; fill in v20-v22 with unique rows. ld1 {v20.8h}, [x2], x7 ld1 {v21.8h}, [x2], x7 ld1 {v22.8h}, [x2], x7 4: .macro filter compare subs w4, w4, #1 // Interleaving the mul/mla chains actually hurts performance // significantly on Cortex A53, thus keeping mul/mla tightly // chained like this. smull v2.4s, v16.4h, v0.h[0] smlal v2.4s, v17.4h, v0.h[1] smlal v2.4s, v18.4h, v0.h[2] smlal v2.4s, v19.4h, v1.h[3] smlal v2.4s, v20.4h, v0.h[4] smlal v2.4s, v21.4h, v0.h[5] smlal v2.4s, v22.4h, v0.h[6] smull2 v3.4s, v16.8h, v0.h[0] smlal2 v3.4s, v17.8h, v0.h[1] smlal2 v3.4s, v18.8h, v0.h[2] smlal2 v3.4s, v19.8h, v1.h[3] smlal2 v3.4s, v20.8h, v0.h[4] smlal2 v3.4s, v21.8h, v0.h[5] smlal2 v3.4s, v22.8h, v0.h[6] sqrshrun v2.4h, v2.4s, #11 sqrshrun2 v2.8h, v3.4s, #11 sqxtun v2.8b, v2.8h st1 {v2.8b}, [x0], x1 .if \compare cmp w4, #4 .else b.le 9f .endif mov v16.16b, v17.16b mov v17.16b, v18.16b mov v18.16b, v19.16b mov v19.16b, v20.16b mov v20.16b, v21.16b mov v21.16b, v22.16b .endm filter 1 b.lt 7f ld1 {v22.8h}, [x2], x7 b 4b 5: // Less than 4 rows in total; not all of v20-v21 are filled yet. tst w6, #8 // LR_HAVE_BOTTOM b.eq 6f // LR_HAVE_BOTTOM cmp w4, #2 // We load at least 2 rows in all cases. ld1 {v20.8h}, [x2], x7 ld1 {v21.8h}, [x2], x7 b.gt 53f // 3 rows in total b.eq 52f // 2 rows in total 51: // 1 row in total, v19 already loaded, load edge into v20-v22. mov v22.16b, v21.16b b 8f 52: // 2 rows in total, v19 already loaded, load v20 with content data // and 2 rows of edge. ld1 {v22.8h}, [x2], x7 mov v23.16b, v22.16b b 8f 53: // 3 rows in total, v19 already loaded, load v20 and v21 with content // and 2 rows of edge. ld1 {v22.8h}, [x2], x7 ld1 {v23.8h}, [x2], x7 mov v24.16b, v23.16b b 8f 6: // !LR_HAVE_BOTTOM cmp w4, #2 b.gt 63f // 3 rows in total b.eq 62f // 2 rows in total 61: // 1 row in total, v19 already loaded, pad that into v20-v22. mov v20.16b, v19.16b mov v21.16b, v19.16b mov v22.16b, v19.16b b 8f 62: // 2 rows in total, v19 already loaded, load v20 and pad that into v21-v23. ld1 {v20.8h}, [x2], x7 mov v21.16b, v20.16b mov v22.16b, v20.16b mov v23.16b, v20.16b b 8f 63: // 3 rows in total, v19 already loaded, load v20 and v21 and pad v21 into v22-v24. ld1 {v20.8h}, [x2], x7 ld1 {v21.8h}, [x2], x7 mov v22.16b, v21.16b mov v23.16b, v21.16b mov v24.16b, v21.16b b 8f 7: // All registers up to v21 are filled already, 3 valid rows left. // < 4 valid rows left; fill in padding and filter the last // few rows. tst w6, #8 // LR_HAVE_BOTTOM b.eq 71f // LR_HAVE_BOTTOM; load 2 rows of edge. ld1 {v22.8h}, [x2], x7 ld1 {v23.8h}, [x2], x7 mov v24.16b, v23.16b b 8f 71: // !LR_HAVE_BOTTOM, pad 3 rows mov v22.16b, v21.16b mov v23.16b, v21.16b mov v24.16b, v21.16b 8: // At this point, all registers up to v22-v24 are loaded with // edge/padding (depending on how many rows are left). filter 0 // This branches to 9f when done mov v22.16b, v23.16b mov v23.16b, v24.16b b 8b 9: // End of one vertical slice. subs w3, w3, #8 b.le 0f // Move pointers back up to the top and loop horizontally. msub x0, x1, x8, x0 msub x2, x7, x11, x2 add x0, x0, #8 add x2, x2, #16 mov w4, w8 b 1b 0: ret .purgem filter endfunc // void dav1d_copy_narrow_neon(pixel *dst, ptrdiff_t stride, // const pixel *src, int w, int h); function copy_narrow_neon, export=1 adr x5, L(copy_narrow_tbl) ldrh w6, [x5, w3, uxtw #1] sub x5, x5, w6, uxth br x5 10: add x7, x0, x1 lsl x1, x1, #1 18: subs w4, w4, #8 b.lt 110f ld1 {v0.8b}, [x2], #8 st1 {v0.b}[0], [x0], x1 st1 {v0.b}[1], [x7], x1 st1 {v0.b}[2], [x0], x1 st1 {v0.b}[3], [x7], x1 st1 {v0.b}[4], [x0], x1 st1 {v0.b}[5], [x7], x1 st1 {v0.b}[6], [x0], x1 st1 {v0.b}[7], [x7], x1 b.le 0f b 18b 110: add w4, w4, #8 asr x1, x1, #1 11: subs w4, w4, #1 ld1 {v0.b}[0], [x2], #1 st1 {v0.b}[0], [x0], x1 b.gt 11b 0: ret 20: add x7, x0, x1 lsl x1, x1, #1 24: subs w4, w4, #4 b.lt 210f ld1 {v0.4h}, [x2], #8 st1 {v0.h}[0], [x0], x1 st1 {v0.h}[1], [x7], x1 st1 {v0.h}[2], [x0], x1 st1 {v0.h}[3], [x7], x1 b.le 0f b 24b 210: add w4, w4, #4 asr x1, x1, #1 22: subs w4, w4, #1 ld1 {v0.h}[0], [x2], #2 st1 {v0.h}[0], [x0], x1 b.gt 22b 0: ret 30: ldrh w5, [x2] ldrb w6, [x2, #2] add x2, x2, #3 subs w4, w4, #1 strh w5, [x0] strb w6, [x0, #2] add x0, x0, x1 b.gt 30b ret 40: add x7, x0, x1 lsl x1, x1, #1 42: subs w4, w4, #2 b.lt 41f ld1 {v0.2s}, [x2], #8 st1 {v0.s}[0], [x0], x1 st1 {v0.s}[1], [x7], x1 b.le 0f b 42b 41: ld1 {v0.s}[0], [x2] st1 {v0.s}[0], [x0] 0: ret 50: ldr w5, [x2] ldrb w6, [x2, #4] add x2, x2, #5 subs w4, w4, #1 str w5, [x0] strb w6, [x0, #4] add x0, x0, x1 b.gt 50b ret 60: ldr w5, [x2] ldrh w6, [x2, #4] add x2, x2, #6 subs w4, w4, #1 str w5, [x0] strh w6, [x0, #4] add x0, x0, x1 b.gt 60b ret 70: ldr w5, [x2] ldrh w6, [x2, #4] ldrb w7, [x2, #6] add x2, x2, #7 subs w4, w4, #1 str w5, [x0] strh w6, [x0, #4] strb w7, [x0, #6] add x0, x0, x1 b.gt 70b ret L(copy_narrow_tbl): .hword 0 .hword L(copy_narrow_tbl) - 10b .hword L(copy_narrow_tbl) - 20b .hword L(copy_narrow_tbl) - 30b .hword L(copy_narrow_tbl) - 40b .hword L(copy_narrow_tbl) - 50b .hword L(copy_narrow_tbl) - 60b .hword L(copy_narrow_tbl) - 70b endfunc #define SUM_STRIDE (384+16) // void dav1d_sgr_box3_h_neon(int32_t *sumsq, int16_t *sum, // const pixel (*left)[4], // const pixel *src, const ptrdiff_t stride, // const int w, const int h, // const enum LrEdgeFlags edges); function sgr_box3_h_neon, export=1 add w5, w5, #2 // w += 2 // Set up pointers for reading/writing alternate rows add x10, x0, #(4*SUM_STRIDE) // sumsq add x11, x1, #(2*SUM_STRIDE) // sum add x12, x3, x4 // src lsl x4, x4, #1 mov x9, #(2*2*SUM_STRIDE) // double sum stride // Subtract the aligned width from the output stride. // With LR_HAVE_RIGHT, align to 8, without it, align to 4. tst w7, #2 // LR_HAVE_RIGHT b.ne 0f // !LR_HAVE_RIGHT add w13, w5, #3 bic w13, w13, #3 b 1f 0: add w13, w5, #7 bic w13, w13, #7 1: sub x9, x9, w13, uxtw #1 // Store the width for the vertical loop mov w8, w5 // Subtract the number of pixels read from the input from the stride add w13, w5, #14 bic w13, w13, #7 sub x4, x4, w13, uxtw // Set up the src pointers to include the left edge, for LR_HAVE_LEFT, left == NULL tst w7, #1 // LR_HAVE_LEFT b.eq 2f // LR_HAVE_LEFT cbnz x2, 0f // left == NULL sub x3, x3, #2 sub x12, x12, #2 b 1f 0: // LR_HAVE_LEFT, left != NULL 2: // !LR_HAVE_LEFT, increase the stride. // For this case we don't read the left 2 pixels from the src pointer, // but shift it as if we had done that. add x4, x4, #2 1: // Loop vertically ld1 {v0.16b}, [x3], #16 ld1 {v4.16b}, [x12], #16 tst w7, #1 // LR_HAVE_LEFT b.eq 0f cbz x2, 2f // LR_HAVE_LEFT, left != NULL ld1 {v1.s}[3], [x2], #4 // Move x3/x12 back to account for the last 2 bytes we loaded earlier, // which we'll shift out. sub x3, x3, #2 sub x12, x12, #2 ld1 {v5.s}[3], [x2], #4 ext v0.16b, v1.16b, v0.16b, #14 ext v4.16b, v5.16b, v4.16b, #14 b 2f 0: // !LR_HAVE_LEFT, fill v1 with the leftmost byte // and shift v0 to have 2x the first byte at the front. dup v1.16b, v0.b[0] dup v5.16b, v4.b[0] // Move x3 back to account for the last 2 bytes we loaded before, // which we shifted out. sub x3, x3, #2 sub x12, x12, #2 ext v0.16b, v1.16b, v0.16b, #14 ext v4.16b, v5.16b, v4.16b, #14 2: umull v1.8h, v0.8b, v0.8b umull2 v2.8h, v0.16b, v0.16b umull v5.8h, v4.8b, v4.8b umull2 v6.8h, v4.16b, v4.16b tst w7, #2 // LR_HAVE_RIGHT b.ne 4f // If we'll need to pad the right edge, load that byte to pad with // here since we can find it pretty easily from here. sub w13, w5, #(2 + 16 - 2 + 1) ldr b30, [x3, w13, sxtw] ldr b31, [x12, w13, sxtw] // Fill v30/v31 with the right padding pixel dup v30.8b, v30.b[0] dup v31.8b, v31.b[0] 3: // !LR_HAVE_RIGHT // If we'll have to pad the right edge we need to quit early here. cmp w5, #10 b.ge 4f // If w >= 10, all used input pixels are valid cmp w5, #6 b.ge 5f // If w >= 6, we can filter 4 pixels b 6f 4: // Loop horizontally .macro uaddl_nh dst1, dst2, src1, src2, w uaddl \dst1, \src1\().4h, \src2\().4h .if \w > 4 uaddl2 \dst2, \src1\().8h, \src2\().8h .endif .endm .macro uaddw_nh dst1, dst2, src, w uaddw \dst1, \dst1, \src\().4h .if \w > 4 uaddw2 \dst2, \dst2, \src\().8h .endif .endm .macro add_nh dst1, dst2, src1, src2, w add \dst1, \dst1, \src1 .if \w > 4 add \dst2, \dst2, \src2 .endif .endm .macro add3 w ext v16.16b, v0.16b, v0.16b, #1 ext v17.16b, v0.16b, v0.16b, #2 ext v18.16b, v4.16b, v4.16b, #1 ext v19.16b, v4.16b, v4.16b, #2 uaddl v3.8h, v0.8b, v16.8b uaddw v3.8h, v3.8h, v17.8b uaddl v7.8h, v4.8b, v18.8b uaddw v7.8h, v7.8h, v19.8b ext v20.16b, v1.16b, v2.16b, #2 ext v21.16b, v1.16b, v2.16b, #4 ext v22.16b, v5.16b, v6.16b, #2 ext v23.16b, v5.16b, v6.16b, #4 uaddl_nh v26.4s, v27.4s, v1, v20, \w uaddw_nh v26.4s, v27.4s, v21, \w uaddl_nh v28.4s, v29.4s, v5, v22, \w uaddw_nh v28.4s, v29.4s, v23, \w .endm add3 8 st1 {v3.8h}, [x1], #16 st1 {v7.8h}, [x11], #16 st1 {v26.4s,v27.4s}, [x0], #32 st1 {v28.4s,v29.4s}, [x10], #32 subs w5, w5, #8 b.le 9f tst w7, #2 // LR_HAVE_RIGHT ld1 {v3.8b}, [x3], #8 ld1 {v7.8b}, [x12], #8 mov v1.16b, v2.16b mov v5.16b, v6.16b ext v0.16b, v0.16b, v3.16b, #8 ext v4.16b, v4.16b, v7.16b, #8 umull v2.8h, v3.8b, v3.8b umull v6.8h, v7.8b, v7.8b b.ne 4b // If we don't need to pad, just keep summing. b 3b // If we need to pad, check how many pixels we have left. 5: // Produce 4 pixels, 6 <= w < 10 add3 4 st1 {v3.4h}, [x1], #8 st1 {v7.4h}, [x11], #8 st1 {v26.4s}, [x0], #16 st1 {v28.4s}, [x10], #16 subs w5, w5, #4 // 2 <= w < 6 ext v0.16b, v0.16b, v0.16b, #4 ext v4.16b, v4.16b, v4.16b, #4 6: // Pad the right edge and produce the last few pixels. // 2 <= w < 6, 2-5 pixels valid in v0 sub w13, w5, #2 // w13 = (pixels valid - 2) adr x14, L(box3_variable_shift_tbl) ldrh w13, [x14, w13, uxtw #1] sub x13, x14, w13, uxth br x13 // Shift v0 right, shifting out invalid pixels, // shift v0 left to the original offset, shifting in padding pixels. 22: // 2 pixels valid ext v0.16b, v0.16b, v0.16b, #2 ext v4.16b, v4.16b, v4.16b, #2 ext v0.16b, v0.16b, v30.16b, #14 ext v4.16b, v4.16b, v31.16b, #14 b 88f 33: // 3 pixels valid ext v0.16b, v0.16b, v0.16b, #3 ext v4.16b, v4.16b, v4.16b, #3 ext v0.16b, v0.16b, v30.16b, #13 ext v4.16b, v4.16b, v31.16b, #13 b 88f 44: // 4 pixels valid ext v0.16b, v0.16b, v0.16b, #4 ext v4.16b, v4.16b, v4.16b, #4 ext v0.16b, v0.16b, v30.16b, #12 ext v4.16b, v4.16b, v31.16b, #12 b 88f 55: // 5 pixels valid ext v0.16b, v0.16b, v0.16b, #5 ext v4.16b, v4.16b, v4.16b, #5 ext v0.16b, v0.16b, v30.16b, #11 ext v4.16b, v4.16b, v31.16b, #11 b 88f L(box3_variable_shift_tbl): .hword L(box3_variable_shift_tbl) - 22b .hword L(box3_variable_shift_tbl) - 33b .hword L(box3_variable_shift_tbl) - 44b .hword L(box3_variable_shift_tbl) - 55b 88: umull v1.8h, v0.8b, v0.8b umull2 v2.8h, v0.16b, v0.16b umull v5.8h, v4.8b, v4.8b umull2 v6.8h, v4.16b, v4.16b add3 4 st1 {v3.4h}, [x1], #8 st1 {v7.4h}, [x11], #8 st1 {v26.4s}, [x0], #16 st1 {v28.4s}, [x10], #16 subs w5, w5, #4 b.le 9f ext v0.16b, v0.16b, v0.16b, #4 ext v4.16b, v4.16b, v4.16b, #4 ext v1.16b, v1.16b, v2.16b, #8 ext v5.16b, v5.16b, v6.16b, #8 // Only one needed pixel left, but do a normal 4 pixel // addition anyway add3 4 st1 {v3.4h}, [x1], #8 st1 {v7.4h}, [x11], #8 st1 {v26.4s}, [x0], #16 st1 {v28.4s}, [x10], #16 9: subs w6, w6, #2 b.le 0f // Jump to the next row and loop horizontally add x0, x0, x9, lsl #1 add x10, x10, x9, lsl #1 add x1, x1, x9 add x11, x11, x9 add x3, x3, x4 add x12, x12, x4 mov w5, w8 b 1b 0: ret .purgem add3 endfunc // void dav1d_sgr_box5_h_neon(int32_t *sumsq, int16_t *sum, // const pixel (*left)[4], // const pixel *src, const ptrdiff_t stride, // const int w, const int h, // const enum LrEdgeFlags edges); function sgr_box5_h_neon, export=1 add w5, w5, #2 // w += 2 // Set up pointers for reading/writing alternate rows add x10, x0, #(4*SUM_STRIDE) // sumsq add x11, x1, #(2*SUM_STRIDE) // sum add x12, x3, x4 // src lsl x4, x4, #1 mov x9, #(2*2*SUM_STRIDE) // double sum stride // Subtract the aligned width from the output stride. // With LR_HAVE_RIGHT, align to 8, without it, align to 4. // Subtract the number of pixels read from the input from the stride. tst w7, #2 // LR_HAVE_RIGHT b.ne 0f // !LR_HAVE_RIGHT add w13, w5, #3 bic w13, w13, #3 add w14, w5, #13 b 1f 0: add w13, w5, #7 bic w13, w13, #7 add w14, w5, #15 1: sub x9, x9, w13, uxtw #1 bic w14, w14, #7 sub x4, x4, w14, uxtw // Store the width for the vertical loop mov w8, w5 // Set up the src pointers to include the left edge, for LR_HAVE_LEFT, left == NULL tst w7, #1 // LR_HAVE_LEFT b.eq 2f // LR_HAVE_LEFT cbnz x2, 0f // left == NULL sub x3, x3, #3 sub x12, x12, #3 b 1f 0: // LR_HAVE_LEFT, left != NULL 2: // !LR_HAVE_LEFT, increase the stride. // For this case we don't read the left 3 pixels from the src pointer, // but shift it as if we had done that. add x4, x4, #3 1: // Loop vertically ld1 {v0.16b}, [x3], #16 ld1 {v4.16b}, [x12], #16 tst w7, #1 // LR_HAVE_LEFT b.eq 0f cbz x2, 2f // LR_HAVE_LEFT, left != NULL ld1 {v1.s}[3], [x2], #4 // Move x3/x12 back to account for the last 3 bytes we loaded earlier, // which we'll shift out. sub x3, x3, #3 sub x12, x12, #3 ld1 {v5.s}[3], [x2], #4 ext v0.16b, v1.16b, v0.16b, #13 ext v4.16b, v5.16b, v4.16b, #13 b 2f 0: // !LR_HAVE_LEFT, fill v2 with the leftmost byte // and shift v3 to have 2x the first byte at the front. dup v1.16b, v0.b[0] dup v5.16b, v4.b[0] // Move x3 back to account for the last 3 bytes we loaded before, // which we shifted out. sub x3, x3, #3 sub x12, x12, #3 ext v0.16b, v1.16b, v0.16b, #13 ext v4.16b, v5.16b, v4.16b, #13 2: umull v1.8h, v0.8b, v0.8b umull2 v2.8h, v0.16b, v0.16b umull v5.8h, v4.8b, v4.8b umull2 v6.8h, v4.16b, v4.16b tst w7, #2 // LR_HAVE_RIGHT b.ne 4f // If we'll need to pad the right edge, load that byte to pad with // here since we can find it pretty easily from here. sub w13, w5, #(2 + 16 - 3 + 1) ldr b30, [x3, w13, sxtw] ldr b31, [x12, w13, sxtw] // Fill v30/v31 with the right padding pixel dup v30.8b, v30.b[0] dup v31.8b, v31.b[0] 3: // !LR_HAVE_RIGHT // If we'll have to pad the right edge we need to quit early here. cmp w5, #11 b.ge 4f // If w >= 11, all used input pixels are valid cmp w5, #7 b.ge 5f // If w >= 7, we can produce 4 pixels b 6f 4: // Loop horizontally .macro add5 w ext v16.16b, v0.16b, v0.16b, #1 ext v17.16b, v0.16b, v0.16b, #2 ext v18.16b, v0.16b, v0.16b, #3 ext v19.16b, v0.16b, v0.16b, #4 ext v20.16b, v4.16b, v4.16b, #1 ext v21.16b, v4.16b, v4.16b, #2 ext v22.16b, v4.16b, v4.16b, #3 ext v23.16b, v4.16b, v5.16b, #4 uaddl v3.8h, v0.8b, v16.8b uaddl v24.8h, v17.8b, v18.8b uaddl v7.8h, v4.8b, v20.8b uaddw v3.8h, v3.8h, v19.8b uaddl v25.8h, v21.8b, v22.8b uaddw v7.8h, v7.8h, v23.8b add v3.8h, v3.8h, v24.8h add v7.8h, v7.8h, v25.8h ext v16.16b, v1.16b, v2.16b, #2 ext v17.16b, v1.16b, v2.16b, #4 ext v18.16b, v1.16b, v2.16b, #6 ext v19.16b, v1.16b, v2.16b, #8 ext v20.16b, v5.16b, v6.16b, #2 ext v21.16b, v5.16b, v6.16b, #4 ext v22.16b, v5.16b, v6.16b, #6 ext v23.16b, v5.16b, v6.16b, #8 uaddl_nh v26.4s, v27.4s, v1, v16, \w uaddl_nh v16.4s, v17.4s, v17, v18, \w uaddl_nh v28.4s, v29.4s, v5, v20, \w uaddw_nh v26.4s, v27.4s, v19, \w uaddl_nh v20.4s, v21.4s, v21, v22, \w uaddw_nh v28.4s, v29.4s, v23, \w add_nh v26.4s, v27.4s, v16.4s, v17.4s, \w add_nh v28.4s, v29.4s, v20.4s, v21.4s, \w .endm add5 8 st1 {v3.8h}, [x1], #16 st1 {v7.8h}, [x11], #16 st1 {v26.4s,v27.4s}, [x0], #32 st1 {v28.4s,v29.4s}, [x10], #32 subs w5, w5, #8 b.le 9f tst w7, #2 // LR_HAVE_RIGHT ld1 {v3.8b}, [x3], #8 ld1 {v7.8b}, [x12], #8 mov v1.16b, v2.16b mov v5.16b, v6.16b ext v0.16b, v0.16b, v3.16b, #8 ext v4.16b, v4.16b, v7.16b, #8 umull v2.8h, v3.8b, v3.8b umull v6.8h, v7.8b, v7.8b b.ne 4b // If we don't need to pad, just keep summing. b 3b // If we need to pad, check how many pixels we have left. 5: // Produce 4 pixels, 7 <= w < 11 add5 4 st1 {v3.4h}, [x1], #8 st1 {v7.4h}, [x11], #8 st1 {v26.4s}, [x0], #16 st1 {v28.4s}, [x10], #16 subs w5, w5, #4 // 3 <= w < 7 ext v0.16b, v0.16b, v0.16b, #4 ext v4.16b, v4.16b, v4.16b, #4 6: // Pad the right edge and produce the last few pixels. // w < 7, w+1 pixels valid in v3/v5 sub w13, w5, #1 // w13 = pixels valid - 2 adr x14, L(box5_variable_shift_tbl) ldrh w13, [x14, w13, uxtw #1] sub x13, x14, w13, uxth br x13 // Shift v3 right, shifting out invalid pixels, // shift v3 left to the original offset, shifting in padding pixels. 22: // 2 pixels valid ext v0.16b, v0.16b, v0.16b, #2 ext v4.16b, v4.16b, v4.16b, #2 ext v0.16b, v0.16b, v30.16b, #14 ext v4.16b, v4.16b, v31.16b, #14 b 88f 33: // 3 pixels valid ext v0.16b, v0.16b, v0.16b, #3 ext v4.16b, v4.16b, v4.16b, #3 ext v0.16b, v0.16b, v30.16b, #13 ext v4.16b, v4.16b, v31.16b, #13 b 88f 44: // 4 pixels valid ext v0.16b, v0.16b, v0.16b, #4 ext v4.16b, v4.16b, v4.16b, #4 ext v0.16b, v0.16b, v30.16b, #12 ext v4.16b, v4.16b, v31.16b, #12 b 88f 55: // 5 pixels valid ext v0.16b, v0.16b, v0.16b, #5 ext v4.16b, v4.16b, v4.16b, #5 ext v0.16b, v0.16b, v30.16b, #11 ext v4.16b, v4.16b, v31.16b, #11 b 88f 66: // 6 pixels valid ext v0.16b, v0.16b, v0.16b, #6 ext v4.16b, v4.16b, v4.16b, #6 ext v0.16b, v0.16b, v30.16b, #10 ext v4.16b, v4.16b, v31.16b, #10 b 88f 77: // 7 pixels valid ext v0.16b, v0.16b, v0.16b, #7 ext v4.16b, v4.16b, v4.16b, #7 ext v0.16b, v0.16b, v30.16b, #9 ext v4.16b, v4.16b, v31.16b, #9 b 88f L(box5_variable_shift_tbl): .hword L(box5_variable_shift_tbl) - 22b .hword L(box5_variable_shift_tbl) - 33b .hword L(box5_variable_shift_tbl) - 44b .hword L(box5_variable_shift_tbl) - 55b .hword L(box5_variable_shift_tbl) - 66b .hword L(box5_variable_shift_tbl) - 77b 88: umull v1.8h, v0.8b, v0.8b umull2 v2.8h, v0.16b, v0.16b umull v5.8h, v4.8b, v4.8b umull2 v6.8h, v4.16b, v4.16b add5 4 st1 {v3.4h}, [x1], #8 st1 {v7.4h}, [x11], #8 st1 {v26.4s}, [x0], #16 st1 {v28.4s}, [x10], #16 subs w5, w5, #4 b.le 9f ext v0.16b, v0.16b, v0.16b, #4 ext v1.16b, v1.16b, v2.16b, #8 ext v4.16b, v4.16b, v4.16b, #4 ext v5.16b, v5.16b, v6.16b, #8 add5 4 st1 {v3.4h}, [x1], #8 st1 {v7.4h}, [x11], #8 st1 {v26.4s}, [x0], #16 st1 {v28.4s}, [x10], #16 9: subs w6, w6, #2 b.le 0f // Jump to the next row and loop horizontally add x0, x0, x9, lsl #1 add x10, x10, x9, lsl #1 add x1, x1, x9 add x11, x11, x9 add x3, x3, x4 add x12, x12, x4 mov w5, w8 b 1b 0: ret .purgem add5 endfunc // void dav1d_sgr_box3_v_neon(int32_t *sumsq, int16_t *sum, // const int w, const int h, // const enum LrEdgeFlags edges); function sgr_box3_v_neon, export=1 add w10, w3, #2 // Number of output rows to move back mov w11, w3 // Number of input rows to move back add w2, w2, #2 // Actual summed width mov x7, #(4*SUM_STRIDE) // sumsq stride mov x8, #(2*SUM_STRIDE) // sum stride sub x0, x0, #(4*SUM_STRIDE) // sumsq -= stride sub x1, x1, #(2*SUM_STRIDE) // sum -= stride tst w4, #4 // LR_HAVE_TOP b.eq 0f // If have top, read from row -2. sub x5, x0, #(4*SUM_STRIDE) sub x6, x1, #(2*SUM_STRIDE) add w11, w11, #2 b 1f 0: // !LR_HAVE_TOP // If we don't have top, read from row 0 even if // we start writing to row -1. add x5, x0, #(4*SUM_STRIDE) add x6, x1, #(2*SUM_STRIDE) 1: tst w4, #8 // LR_HAVE_BOTTOM b.eq 1f // LR_HAVE_BOTTOM add w3, w3, #2 // Sum all h+2 lines with the main loop add w11, w11, #2 1: mov w9, w3 // Backup of h for next loops 1: // Start of horizontal loop; start one vertical filter slice. // Start loading rows into v16-v21 and v24-v26 taking top // padding into consideration. tst w4, #4 // LR_HAVE_TOP ld1 {v16.4s, v17.4s}, [x5], x7 ld1 {v24.8h}, [x6], x8 b.eq 2f // LR_HAVE_TOP ld1 {v18.4s, v19.4s}, [x5], x7 ld1 {v25.8h}, [x6], x8 ld1 {v20.4s, v21.4s}, [x5], x7 ld1 {v26.8h}, [x6], x8 b 3f 2: // !LR_HAVE_TOP mov v18.16b, v16.16b mov v19.16b, v17.16b mov v25.16b, v24.16b mov v20.16b, v16.16b mov v21.16b, v17.16b mov v26.16b, v24.16b 3: subs w3, w3, #1 .macro add3 add v16.4s, v16.4s, v18.4s add v17.4s, v17.4s, v19.4s add v24.8h, v24.8h, v25.8h add v16.4s, v16.4s, v20.4s add v17.4s, v17.4s, v21.4s add v24.8h, v24.8h, v26.8h st1 {v16.4s, v17.4s}, [x0], x7 st1 {v24.8h}, [x1], x8 .endm add3 mov v16.16b, v18.16b mov v17.16b, v19.16b mov v24.16b, v25.16b mov v18.16b, v20.16b mov v19.16b, v21.16b mov v25.16b, v26.16b b.le 4f ld1 {v20.4s, v21.4s}, [x5], x7 ld1 {v26.8h}, [x6], x8 b 3b 4: tst w4, #8 // LR_HAVE_BOTTOM b.ne 5f // !LR_HAVE_BOTTOM // Produce two more rows, extending the already loaded rows. add3 mov v16.16b, v18.16b mov v17.16b, v19.16b mov v24.16b, v25.16b add3 5: // End of one vertical slice. subs w2, w2, #8 b.le 0f // Move pointers back up to the top and loop horizontally. // Input pointers msub x5, x7, x11, x5 msub x6, x8, x11, x6 // Output pointers msub x0, x7, x10, x0 msub x1, x8, x10, x1 add x0, x0, #32 add x1, x1, #16 add x5, x5, #32 add x6, x6, #16 mov w3, w9 b 1b 0: ret .purgem add3 endfunc // void dav1d_sgr_box5_v_neon(int32_t *sumsq, int16_t *sum, // const int w, const int h, // const enum LrEdgeFlags edges); function sgr_box5_v_neon, export=1 add w10, w3, #2 // Number of output rows to move back mov w11, w3 // Number of input rows to move back add w2, w2, #8 // Actual summed width mov x7, #(4*SUM_STRIDE) // sumsq stride mov x8, #(2*SUM_STRIDE) // sum stride sub x0, x0, #(4*SUM_STRIDE) // sumsq -= stride sub x1, x1, #(2*SUM_STRIDE) // sum -= stride tst w4, #4 // LR_HAVE_TOP b.eq 0f // If have top, read from row -2. sub x5, x0, #(4*SUM_STRIDE) sub x6, x1, #(2*SUM_STRIDE) add w11, w11, #2 b 1f 0: // !LR_HAVE_TOP // If we don't have top, read from row 0 even if // we start writing to row -1. add x5, x0, #(4*SUM_STRIDE) add x6, x1, #(2*SUM_STRIDE) 1: tst w4, #8 // LR_HAVE_BOTTOM b.eq 0f // LR_HAVE_BOTTOM add w3, w3, #2 // Handle h+2 lines with the main loop add w11, w11, #2 b 1f 0: // !LR_HAVE_BOTTOM sub w3, w3, #1 // Handle h-1 lines with the main loop 1: mov w9, w3 // Backup of h for next loops 1: // Start of horizontal loop; start one vertical filter slice. // Start loading rows into v16-v25 and v26-v30 taking top // padding into consideration. tst w4, #4 // LR_HAVE_TOP ld1 {v16.4s, v17.4s}, [x5], x7 ld1 {v26.8h}, [x6], x8 b.eq 2f // LR_HAVE_TOP ld1 {v20.4s, v21.4s}, [x5], x7 ld1 {v28.8h}, [x6], x8 mov v18.16b, v16.16b mov v19.16b, v17.16b mov v27.16b, v26.16b ld1 {v22.4s, v23.4s}, [x5], x7 ld1 {v29.8h}, [x6], x8 b 3f 2: // !LR_HAVE_TOP mov v18.16b, v16.16b mov v19.16b, v17.16b mov v27.16b, v26.16b mov v20.16b, v16.16b mov v21.16b, v17.16b mov v28.16b, v26.16b mov v22.16b, v16.16b mov v23.16b, v17.16b mov v29.16b, v26.16b 3: cbz w3, 4f ld1 {v24.4s, v25.4s}, [x5], x7 ld1 {v30.8h}, [x6], x8 3: // Start of vertical loop subs w3, w3, #2 .macro add5 add v16.4s, v16.4s, v18.4s add v17.4s, v17.4s, v19.4s add v26.8h, v26.8h, v27.8h add v0.4s, v20.4s, v22.4s add v1.4s, v21.4s, v23.4s add v2.8h, v28.8h, v29.8h add v16.4s, v16.4s, v24.4s add v17.4s, v17.4s, v25.4s add v26.8h, v26.8h, v30.8h add v16.4s, v16.4s, v0.4s add v17.4s, v17.4s, v1.4s add v26.8h, v26.8h, v2.8h st1 {v16.4s, v17.4s}, [x0], x7 st1 {v26.8h}, [x1], x8 .endm add5 .macro shift2 mov v16.16b, v20.16b mov v17.16b, v21.16b mov v26.16b, v28.16b mov v18.16b, v22.16b mov v19.16b, v23.16b mov v27.16b, v29.16b mov v20.16b, v24.16b mov v21.16b, v25.16b mov v28.16b, v30.16b .endm shift2 add x0, x0, x7 add x1, x1, x8 b.le 5f ld1 {v22.4s, v23.4s}, [x5], x7 ld1 {v29.8h}, [x6], x8 ld1 {v24.4s, v25.4s}, [x5], x7 ld1 {v30.8h}, [x6], x8 b 3b 4: // h == 1, !LR_HAVE_BOTTOM. // Pad the last row with the only content row, and add. mov v24.16b, v22.16b mov v25.16b, v23.16b mov v30.16b, v29.16b add5 shift2 add x0, x0, x7 add x1, x1, x8 add5 b 6f 5: tst w4, #8 // LR_HAVE_BOTTOM b.ne 6f // !LR_HAVE_BOTTOM cbnz w3, 5f // The intended three edge rows left; output the one at h-2 and // the past edge one at h. ld1 {v22.4s, v23.4s}, [x5], x7 ld1 {v29.8h}, [x6], x8 // Pad the past-edge row from the last content row. mov v24.16b, v22.16b mov v25.16b, v23.16b mov v30.16b, v29.16b add5 shift2 add x0, x0, x7 add x1, x1, x8 // The last two rows are already padded properly here. add5 b 6f 5: // w3 == -1, two rows left, output one. // Pad the last two rows from the mid one. mov v22.16b, v20.16b mov v23.16b, v21.16b mov v29.16b, v28.16b mov v24.16b, v20.16b mov v25.16b, v21.16b mov v30.16b, v28.16b add5 add x0, x0, x7 add x1, x1, x8 b 6f 6: // End of one vertical slice. subs w2, w2, #8 b.le 0f // Move pointers back up to the top and loop horizontally. // Input pointers msub x5, x7, x11, x5 msub x6, x8, x11, x6 // Output pointers msub x0, x7, x10, x0 msub x1, x8, x10, x1 add x0, x0, #32 add x1, x1, #16 add x5, x5, #32 add x6, x6, #16 mov w3, w9 b 1b 0: ret .purgem add5 endfunc // void dav1d_sgr_calc_ab1_neon(int32_t *a, int16_t *b, // const int w, const int h, const int strength); // void dav1d_sgr_calc_ab2_neon(int32_t *a, int16_t *b, // const int w, const int h, const int strength); function sgr_calc_ab1_neon, export=1 add x3, x3, #2 // h += 2 movi v31.4s, #9 // n mov x5, #455 mov x8, #SUM_STRIDE b sgr_calc_ab_neon endfunc function sgr_calc_ab2_neon, export=1 add x3, x3, #3 // h += 3 asr x3, x3, #1 // h /= 2 movi v31.4s, #25 // n mov x5, #164 mov x8, #(2*SUM_STRIDE) endfunc function sgr_calc_ab_neon movrel x12, X(sgr_x_by_x) ld1 {v16.16b, v17.16b, v18.16b}, [x12] movi v19.16b, #5 movi v20.8b, #55 // idx of last 5 movi v21.8b, #72 // idx of last 4 movi v22.8b, #101 // idx of last 3 movi v23.8b, #169 // idx of last 2 movi v24.8b, #254 // idx of last 1 add x2, x2, #2 // w += 2 add x7, x2, #7 bic x7, x7, #7 // aligned w sub x7, x8, x7 // increment between rows movi v29.8h, #1, lsl #8 dup v28.4s, w4 dup v30.4s, w5 // one_by_x sub x0, x0, #(4*(SUM_STRIDE)) sub x1, x1, #(2*(SUM_STRIDE)) mov x6, x2 // backup of w sub v16.16b, v16.16b, v19.16b sub v17.16b, v17.16b, v19.16b sub v18.16b, v18.16b, v19.16b 1: subs x2, x2, #8 ld1 {v0.4s, v1.4s}, [x0] // a ld1 {v2.8h}, [x1] // b mul v0.4s, v0.4s, v31.4s // a * n mul v1.4s, v1.4s, v31.4s // a * n umull v3.4s, v2.4h, v2.4h // b * b umull2 v4.4s, v2.8h, v2.8h // b * b uqsub v0.4s, v0.4s, v3.4s // imax(a * n - b * b, 0) uqsub v1.4s, v1.4s, v4.4s // imax(a * n - b * b, 0) mul v0.4s, v0.4s, v28.4s // p * s mul v1.4s, v1.4s, v28.4s // p * s uqshrn v0.4h, v0.4s, #16 uqshrn2 v0.8h, v1.4s, #16 uqrshrn v0.8b, v0.8h, #4 // imin(z, 255) cmhi v25.8b, v0.8b, v20.8b // = -1 if sgr_x_by_x[v0] < 5 cmhi v26.8b, v0.8b, v21.8b // = -1 if sgr_x_by_x[v0] < 4 tbl v1.8b, {v16.16b, v17.16b, v18.16b}, v0.8b cmhi v27.8b, v0.8b, v22.8b // = -1 if sgr_x_by_x[v0] < 3 cmhi v5.8b, v0.8b, v23.8b // = -1 if sgr_x_by_x[v0] < 2 add v25.8b, v25.8b, v26.8b cmhi v6.8b, v0.8b, v24.8b // = -1 if sgr_x_by_x[v0] < 1 add v27.8b, v27.8b, v5.8b add v6.8b, v6.8b, v19.8b add v25.8b, v25.8b, v27.8b add v1.8b, v1.8b, v6.8b add v1.8b, v1.8b, v25.8b uxtl v1.8h, v1.8b // x umull v3.4s, v1.4h, v2.4h // x * BB[i] umull2 v4.4s, v1.8h, v2.8h // x * BB[i] mul v3.4s, v3.4s, v30.4s // x * BB[i] * sgr_one_by_x mul v4.4s, v4.4s, v30.4s // x * BB[i] * sgr_one_by_x srshr v3.4s, v3.4s, #12 // AA[i] srshr v4.4s, v4.4s, #12 // AA[i] sub v2.8h, v29.8h, v1.8h // 256 - x st1 {v3.4s, v4.4s}, [x0], #32 st1 {v2.8h}, [x1], #16 b.gt 1b subs x3, x3, #1 b.le 0f add x0, x0, x7, lsl #2 add x1, x1, x7, lsl #1 mov x2, x6 b 1b 0: ret endfunc #define FILTER_OUT_STRIDE 384 // void dav1d_sgr_finish_filter1_neon(coef *tmp, // const pixel *src, const ptrdiff_t stride, // const int32_t *a, const int16_t *b, // const int w, const int h); function sgr_finish_filter1_neon, export=1 sub x7, x3, #(4*SUM_STRIDE) add x8, x3, #(4*SUM_STRIDE) sub x9, x4, #(2*SUM_STRIDE) add x10, x4, #(2*SUM_STRIDE) mov x11, #SUM_STRIDE mov x12, #FILTER_OUT_STRIDE add x13, x5, #7 bic x13, x13, #7 // Aligned width sub x2, x2, x13 sub x12, x12, x13 sub x11, x11, x13 sub x11, x11, #4 // We read 4 extra elements from a sub x14, x11, #4 // We read 8 extra elements from b mov x13, x5 movi v6.8h, #3 movi v7.4s, #3 1: ld1 {v0.8h, v1.8h}, [x9], #32 ld1 {v2.8h, v3.8h}, [x4], #32 ld1 {v4.8h, v5.8h}, [x10], #32 ld1 {v16.4s, v17.4s, v18.4s}, [x7], #48 ld1 {v19.4s, v20.4s, v21.4s}, [x3], #48 ld1 {v22.4s, v23.4s, v24.4s}, [x8], #48 2: subs x5, x5, #8 ext v25.16b, v0.16b, v1.16b, #2 // -stride ext v26.16b, v2.16b, v3.16b, #2 // 0 ext v27.16b, v4.16b, v5.16b, #2 // +stride ext v28.16b, v0.16b, v1.16b, #4 // +1-stride ext v29.16b, v2.16b, v3.16b, #4 // +1 ext v30.16b, v4.16b, v5.16b, #4 // +1+stride add v2.8h, v2.8h, v25.8h // -1, -stride add v26.8h, v26.8h, v27.8h // 0, +stride add v0.8h, v0.8h, v28.8h // -1-stride, +1-stride add v2.8h, v2.8h, v26.8h add v4.8h, v4.8h, v30.8h // -1+stride, +1+stride add v2.8h, v2.8h, v29.8h // +1 add v0.8h, v0.8h, v4.8h ext v25.16b, v16.16b, v17.16b, #4 // -stride ext v26.16b, v17.16b, v18.16b, #4 shl v2.8h, v2.8h, #2 ext v27.16b, v16.16b, v17.16b, #8 // +1-stride ext v28.16b, v17.16b, v18.16b, #8 ext v29.16b, v19.16b, v20.16b, #4 // 0 ext v30.16b, v20.16b, v21.16b, #4 mla v2.8h, v0.8h, v6.8h // * 3 -> a add v25.4s, v25.4s, v19.4s // -stride, -1 add v26.4s, v26.4s, v20.4s add v16.4s, v16.4s, v27.4s // -1-stride, +1-stride add v17.4s, v17.4s, v28.4s ext v27.16b, v19.16b, v20.16b, #8 // +1 ext v28.16b, v20.16b, v21.16b, #8 add v16.4s, v16.4s, v22.4s // -1+stride add v17.4s, v17.4s, v23.4s add v29.4s, v29.4s, v27.4s // 0, +1 add v30.4s, v30.4s, v28.4s add v25.4s, v25.4s, v29.4s add v26.4s, v26.4s, v30.4s ext v27.16b, v22.16b, v23.16b, #4 // +stride ext v28.16b, v23.16b, v24.16b, #4 ext v29.16b, v22.16b, v23.16b, #8 // +1+stride ext v30.16b, v23.16b, v24.16b, #8 ld1 {v19.8b}, [x1], #8 // src add v25.4s, v25.4s, v27.4s // +stride add v26.4s, v26.4s, v28.4s add v16.4s, v16.4s, v29.4s // +1+stride add v17.4s, v17.4s, v30.4s shl v25.4s, v25.4s, #2 shl v26.4s, v26.4s, #2 mla v25.4s, v16.4s, v7.4s // * 3 -> b mla v26.4s, v17.4s, v7.4s uxtl v19.8h, v19.8b // src mov v0.16b, v1.16b umlal v25.4s, v2.4h, v19.4h // b + a * src umlal2 v26.4s, v2.8h, v19.8h mov v2.16b, v3.16b rshrn v25.4h, v25.4s, #9 rshrn2 v25.8h, v26.4s, #9 mov v4.16b, v5.16b st1 {v25.8h}, [x0], #16 b.le 3f mov v16.16b, v18.16b mov v19.16b, v21.16b mov v22.16b, v24.16b ld1 {v1.8h}, [x9], #16 ld1 {v3.8h}, [x4], #16 ld1 {v5.8h}, [x10], #16 ld1 {v17.4s, v18.4s}, [x7], #32 ld1 {v20.4s, v21.4s}, [x3], #32 ld1 {v23.4s, v24.4s}, [x8], #32 b 2b 3: subs x6, x6, #1 b.le 0f mov x5, x13 add x0, x0, x12, lsl #1 add x1, x1, x2 add x3, x3, x11, lsl #2 add x7, x7, x11, lsl #2 add x8, x8, x11, lsl #2 add x4, x4, x14, lsl #1 add x9, x9, x14, lsl #1 add x10, x10, x14, lsl #1 b 1b 0: ret endfunc // void dav1d_sgr_finish_filter2_neon(coef *tmp, // const pixel *src, const ptrdiff_t stride, // const int32_t *a, const int16_t *b, // const int w, const int h); function sgr_finish_filter2_neon, export=1 add x7, x3, #(4*(SUM_STRIDE)) sub x3, x3, #(4*(SUM_STRIDE)) add x8, x4, #(2*(SUM_STRIDE)) sub x4, x4, #(2*(SUM_STRIDE)) mov x9, #(2*SUM_STRIDE) mov x10, #FILTER_OUT_STRIDE add x11, x5, #7 bic x11, x11, #7 // Aligned width sub x2, x2, x11 sub x10, x10, x11 sub x9, x9, x11 sub x9, x9, #4 // We read 4 extra elements from a sub x12, x9, #4 // We read 8 extra elements from b mov x11, x5 movi v4.8h, #5 movi v5.4s, #5 movi v6.8h, #6 movi v7.4s, #6 1: ld1 {v0.8h, v1.8h}, [x4], #32 ld1 {v2.8h, v3.8h}, [x8], #32 ld1 {v16.4s, v17.4s, v18.4s}, [x3], #48 ld1 {v19.4s, v20.4s, v21.4s}, [x7], #48 2: subs x5, x5, #8 ext v22.16b, v0.16b, v1.16b, #2 // -stride ext v23.16b, v2.16b, v3.16b, #2 // +stride ext v24.16b, v0.16b, v1.16b, #4 // +1-stride ext v25.16b, v2.16b, v3.16b, #4 // +1+stride add v0.8h, v0.8h, v24.8h // -1-stride, +1-stride add v25.8h, v2.8h, v25.8h // -1+stride, +1+stride add v0.8h, v0.8h, v25.8h add v2.8h, v22.8h, v23.8h // -stride, +stride ext v22.16b, v16.16b, v17.16b, #4 // -stride ext v23.16b, v17.16b, v18.16b, #4 ext v24.16b, v19.16b, v20.16b, #4 // +stride ext v25.16b, v20.16b, v21.16b, #4 ext v26.16b, v16.16b, v17.16b, #8 // +1-stride ext v27.16b, v17.16b, v18.16b, #8 ext v28.16b, v19.16b, v20.16b, #8 // +1+stride ext v29.16b, v20.16b, v21.16b, #8 mul v0.8h, v0.8h, v4.8h // * 5 mla v0.8h, v2.8h, v6.8h // * 6 ld1 {v31.8b}, [x1], #8 add v16.4s, v16.4s, v26.4s // -1-stride, +1-stride add v17.4s, v17.4s, v27.4s add v19.4s, v19.4s, v28.4s // -1+stride, +1+stride add v20.4s, v20.4s, v29.4s add v16.4s, v16.4s, v19.4s add v17.4s, v17.4s, v20.4s add v22.4s, v22.4s, v24.4s // -stride, +stride add v23.4s, v23.4s, v25.4s // This is, surprisingly, faster than other variants where the // mul+mla pairs are further apart, on Cortex A53. mul v16.4s, v16.4s, v5.4s // * 5 mla v16.4s, v22.4s, v7.4s // * 6 mul v17.4s, v17.4s, v5.4s // * 5 mla v17.4s, v23.4s, v7.4s // * 6 uxtl v31.8h, v31.8b umlal v16.4s, v0.4h, v31.4h // b + a * src umlal2 v17.4s, v0.8h, v31.8h mov v0.16b, v1.16b rshrn v16.4h, v16.4s, #9 rshrn2 v16.8h, v17.4s, #9 mov v2.16b, v3.16b st1 {v16.8h}, [x0], #16 b.le 3f mov v16.16b, v18.16b mov v19.16b, v21.16b ld1 {v1.8h}, [x4], #16 ld1 {v3.8h}, [x8], #16 ld1 {v17.4s, v18.4s}, [x3], #32 ld1 {v20.4s, v21.4s}, [x7], #32 b 2b 3: subs x6, x6, #1 b.le 0f mov x5, x11 add x0, x0, x10, lsl #1 add x1, x1, x2 add x3, x3, x9, lsl #2 add x7, x7, x9, lsl #2 add x4, x4, x12, lsl #1 add x8, x8, x12, lsl #1 mov x13, x3 mov x14, x4 ld1 {v0.8h, v1.8h}, [x4], #32 ld1 {v16.4s, v17.4s, v18.4s}, [x3], #48 4: subs x5, x5, #8 ext v22.16b, v0.16b, v1.16b, #2 // 0 ext v23.16b, v0.16b, v1.16b, #4 // +1 add v0.8h, v0.8h, v23.8h // -1, +1 ext v24.16b, v16.16b, v17.16b, #4 // 0 ext v25.16b, v17.16b, v18.16b, #4 ext v26.16b, v16.16b, v17.16b, #8 // +1 ext v27.16b, v17.16b, v18.16b, #8 mul v2.8h, v22.8h, v6.8h // * 6 mla v2.8h, v0.8h, v4.8h // * 5 -> a ld1 {v31.8b}, [x1], #8 add v16.4s, v16.4s, v26.4s // -1, +1 add v17.4s, v17.4s, v27.4s uxtl v31.8h, v31.8b // This is, surprisingly, faster than other variants where the // mul+mla pairs are further apart, on Cortex A53. mul v24.4s, v24.4s, v7.4s // * 6 mla v24.4s, v16.4s, v5.4s // * 5 -> b mul v25.4s, v25.4s, v7.4s // * 6 mla v25.4s, v17.4s, v5.4s // * 5 -> b umlal v24.4s, v2.4h, v31.4h // b + a * src umlal2 v25.4s, v2.8h, v31.8h mov v0.16b, v1.16b rshrn v24.4h, v24.4s, #8 rshrn2 v24.8h, v25.4s, #8 mov v16.16b, v18.16b st1 {v24.8h}, [x0], #16 b.le 5f ld1 {v1.8h}, [x4], #16 ld1 {v17.4s, v18.4s}, [x3], #32 b 4b 5: subs x6, x6, #1 b.le 0f mov x5, x11 add x0, x0, x10, lsl #1 add x1, x1, x2 mov x3, x13 // Rewind x3/x4 to where they started mov x4, x14 b 1b 0: ret endfunc // void dav1d_sgr_weighted1_neon(pixel *dst, const ptrdiff_t dst_stride, // const pixel *src, const ptrdiff_t src_stride, // const coef *t1, const int w, const int h, // const int wt); function sgr_weighted1_neon, export=1 dup v31.8h, w7 cmp x6, #2 add x9, x0, x1 add x10, x2, x3 add x11, x4, #2*FILTER_OUT_STRIDE mov x7, #(4*FILTER_OUT_STRIDE) lsl x1, x1, #1 lsl x3, x3, #1 add x8, x5, #7 bic x8, x8, #7 // Aligned width sub x1, x1, x8 sub x3, x3, x8 sub x7, x7, x8, lsl #1 mov x8, x5 b.lt 2f 1: ld1 {v0.8b}, [x2], #8 ld1 {v4.8b}, [x10], #8 ld1 {v1.8h}, [x4], #16 ld1 {v5.8h}, [x11], #16 subs x5, x5, #8 ushll v0.8h, v0.8b, #4 // u ushll v4.8h, v4.8b, #4 // u sub v1.8h, v1.8h, v0.8h // t1 - u sub v5.8h, v5.8h, v4.8h // t1 - u ushll v2.4s, v0.4h, #7 // u << 7 ushll2 v3.4s, v0.8h, #7 // u << 7 ushll v6.4s, v4.4h, #7 // u << 7 ushll2 v7.4s, v4.8h, #7 // u << 7 smlal v2.4s, v1.4h, v31.4h // v smlal2 v3.4s, v1.8h, v31.8h // v smlal v6.4s, v5.4h, v31.4h // v smlal2 v7.4s, v5.8h, v31.8h // v rshrn v2.4h, v2.4s, #11 rshrn2 v2.8h, v3.4s, #11 rshrn v6.4h, v6.4s, #11 rshrn2 v6.8h, v7.4s, #11 sqxtun v2.8b, v2.8h sqxtun v6.8b, v6.8h st1 {v2.8b}, [x0], #8 st1 {v6.8b}, [x9], #8 b.gt 1b sub x6, x6, #2 cmp x6, #1 b.lt 0f mov x5, x8 add x0, x0, x1 add x9, x9, x1 add x2, x2, x3 add x10, x10, x3 add x4, x4, x7 add x11, x11, x7 b.eq 2f b 1b 2: ld1 {v0.8b}, [x2], #8 ld1 {v1.8h}, [x4], #16 subs x5, x5, #8 ushll v0.8h, v0.8b, #4 // u sub v1.8h, v1.8h, v0.8h // t1 - u ushll v2.4s, v0.4h, #7 // u << 7 ushll2 v3.4s, v0.8h, #7 // u << 7 smlal v2.4s, v1.4h, v31.4h // v smlal2 v3.4s, v1.8h, v31.8h // v rshrn v2.4h, v2.4s, #11 rshrn2 v2.8h, v3.4s, #11 sqxtun v2.8b, v2.8h st1 {v2.8b}, [x0], #8 b.gt 2b 0: ret endfunc // void dav1d_sgr_weighted2_neon(pixel *dst, const ptrdiff_t stride, // const pixel *src, const ptrdiff_t src_stride, // const coef *t1, const coef *t2, // const int w, const int h, // const int16_t wt[2]); function sgr_weighted2_neon, export=1 ldr x8, [sp] ld1 {v31.s}[0], [x8] cmp x7, #2 add x10, x0, x1 add x11, x2, x3 add x12, x4, #2*FILTER_OUT_STRIDE add x13, x5, #2*FILTER_OUT_STRIDE mov x8, #4*FILTER_OUT_STRIDE lsl x1, x1, #1 lsl x3, x3, #1 add x9, x6, #7 bic x9, x9, #7 // Aligned width sub x1, x1, x9 sub x3, x3, x9 sub x8, x8, x9, lsl #1 dup v30.8h, v31.h[0] // wt[0] dup v31.8h, v31.h[1] // wt[1] mov x9, x6 b.lt 2f 1: ld1 {v0.8b}, [x2], #8 ld1 {v16.8b}, [x11], #8 ld1 {v1.8h}, [x4], #16 ld1 {v17.8h}, [x12], #16 ld1 {v2.8h}, [x5], #16 ld1 {v18.8h}, [x13], #16 subs x6, x6, #8 ushll v0.8h, v0.8b, #4 // u ushll v16.8h, v16.8b, #4 // u sub v1.8h, v1.8h, v0.8h // t1 - u sub v2.8h, v2.8h, v0.8h // t2 - u sub v17.8h, v17.8h, v16.8h // t1 - u sub v18.8h, v18.8h, v16.8h // t2 - u ushll v3.4s, v0.4h, #7 // u << 7 ushll2 v4.4s, v0.8h, #7 // u << 7 ushll v19.4s, v16.4h, #7 // u << 7 ushll2 v20.4s, v16.8h, #7 // u << 7 smlal v3.4s, v1.4h, v30.4h // wt[0] * (t1 - u) smlal v3.4s, v2.4h, v31.4h // wt[1] * (t2 - u) smlal2 v4.4s, v1.8h, v30.8h // wt[0] * (t1 - u) smlal2 v4.4s, v2.8h, v31.8h // wt[1] * (t2 - u) smlal v19.4s, v17.4h, v30.4h // wt[0] * (t1 - u) smlal v19.4s, v18.4h, v31.4h // wt[1] * (t2 - u) smlal2 v20.4s, v17.8h, v30.8h // wt[0] * (t1 - u) smlal2 v20.4s, v18.8h, v31.8h // wt[1] * (t2 - u) rshrn v3.4h, v3.4s, #11 rshrn2 v3.8h, v4.4s, #11 rshrn v19.4h, v19.4s, #11 rshrn2 v19.8h, v20.4s, #11 sqxtun v3.8b, v3.8h sqxtun v19.8b, v19.8h st1 {v3.8b}, [x0], #8 st1 {v19.8b}, [x10], #8 b.gt 1b subs x7, x7, #2 cmp x7, #1 b.lt 0f mov x6, x9 add x0, x0, x1 add x10, x10, x1 add x2, x2, x3 add x11, x11, x3 add x4, x4, x8 add x12, x12, x8 add x5, x5, x8 add x13, x13, x8 b.eq 2f b 1b 2: ld1 {v0.8b}, [x2], #8 ld1 {v1.8h}, [x4], #16 ld1 {v2.8h}, [x5], #16 subs x6, x6, #8 ushll v0.8h, v0.8b, #4 // u sub v1.8h, v1.8h, v0.8h // t1 - u sub v2.8h, v2.8h, v0.8h // t2 - u ushll v3.4s, v0.4h, #7 // u << 7 ushll2 v4.4s, v0.8h, #7 // u << 7 smlal v3.4s, v1.4h, v30.4h // wt[0] * (t1 - u) smlal v3.4s, v2.4h, v31.4h // wt[1] * (t2 - u) smlal2 v4.4s, v1.8h, v30.8h // wt[0] * (t1 - u) smlal2 v4.4s, v2.8h, v31.8h // wt[1] * (t2 - u) rshrn v3.4h, v3.4s, #11 rshrn2 v3.8h, v4.4s, #11 sqxtun v3.8b, v3.8h st1 {v3.8b}, [x0], #8 b.gt 1b 0: ret endfunc