shithub: leaf

ref: a71835e6d17ecd00bf6d37fa1e4560f4507a6c23
dir: /LEAF/Inc/leaf-physical.h/

View raw version
/*
 ==============================================================================
 
 leaf-physical.h
 Created: 30 Nov 2018 10:41:55am
 Author:  airship
 
 ==============================================================================
 */

#ifndef LEAF_PHYSICAL_H_INCLUDED
#define LEAF_PHYSICAL_H_INCLUDED

#ifdef __cplusplus
extern "C" {
#endif
    
    //==============================================================================
    
#include "leaf-global.h"
#include "leaf-math.h"
#include "leaf-delay.h"
#include "leaf-filters.h"
#include "leaf-oscillators.h"
#include "leaf-envelopes.h"
#include "leaf-dynamics.h"
    
    //==============================================================================
    
    /* Karplus Strong model */
    typedef struct _tPluck
    {
        tAllpassDelay     delayLine; // Allpass or Linear??  big difference...
        tOneZero    loopFilter;
        tOnePole    pickFilter;
        tNoise      noise;
        
        float lastOut;
        float loopGain;
        float lastFreq;
        
        float sr;
        
    } _tPluck;
    
    typedef _tPluck* tPluck;
    
    void        tPluck_init          (tPluck*  const, float lowestFrequency); //float delayBuff[DELAY_LENGTH]);
    void        tPluck_free          (tPluck*  const);
    
    float       tPluck_tick          (tPluck*  const);
    
    // Pluck the string.
    void        tPluck_pluck         (tPluck*  const, float amplitude);
    
    // Start a note with the given frequency and amplitude.;
    void        tPluck_noteOn        (tPluck*  const, float frequency, float amplitude );
    
    // Stop a note with the given amplitude (speed of decay).
    void        tPluck_noteOff       (tPluck*  const, float amplitude );
    
    // Set instrument parameters for a particular frequency.
    void        tPluck_setFrequency  (tPluck*  const, float frequency );
    
    // Perform the control change specified by \e number and \e value (0.0 - 128.0).
    void        tPluck_controlChange (tPluck*  const, int number, float value);
    
    // tPluck Utilities.
    float       tPluck_getLastOut    (tPluck*  const);
    
    //==============================================================================
    
    typedef enum SKControlType
    {
        SKPickPosition = 0,
        SKStringDamping,
        SKDetune,
        SKControlTypeNil
    } SKControlType;
    
    /* Stif Karplus Strong model */
    typedef struct _tKarplusStrong
    {
        tAllpassDelay  delayLine;
        tLinearDelay combDelay;
        tOneZero filter;
        tNoise   noise;
        tBiQuad  biquad[4];
        
        uint32_t length;
        float loopGain;
        float baseLoopGain;
        float lastFrequency;
        float lastLength;
        float stretching;
        float pluckAmplitude;
        float pickupPosition;
        
        float lastOut;
        
    } _tKarplusStrong;
    
    typedef _tKarplusStrong* tKarplusStrong;
    
    void        tKarplusStrong_init               (tKarplusStrong* const, float lowestFrequency); // float delayBuff[2][DELAY_LENGTH]);
    void        tKarplusStrong_free               (tKarplusStrong* const);
    
    float       tKarplusStrong_tick               (tKarplusStrong*  const);
    
    // Pluck the string.
    void        tKarplusStrong_pluck              (tKarplusStrong*  const, float amplitude);
    
    // Start a note with the given frequency and amplitude.;
    void        tKarplusStrong_noteOn             (tKarplusStrong*  const, float frequency, float amplitude );
    
    // Stop a note with the given amplitude (speed of decay).
    void        tKarplusStrong_noteOff            (tKarplusStrong*  const, float amplitude );
    
    // Set instrument parameters for a particular frequency.
    void        tKarplusStrong_setFrequency       (tKarplusStrong*  const, float frequency );
    
    // Perform the control change specified by \e number and \e value (0.0 - 128.0).
    // Use SKPickPosition, SKStringDamping, or SKDetune for type.
    void        tKarplusStrong_controlChange      (tKarplusStrong*  const, SKControlType type, float value);
    
    // Set the stretch "factor" of the string (0.0 - 1.0).
    void        tKarplusStrong_setStretch         (tKarplusStrong*  const, float stretch );
    
    // Set the pluck or "excitation" position along the string (0.0 - 1.0).
    void        tKarplusStrong_setPickupPosition  (tKarplusStrong*  const, float position );
    
    // Set the base loop gain.
    void        tKarplusStrong_setBaseLoopGain    (tKarplusStrong*  const, float aGain );
    
    // tKarplusStrong utilities.
    float       tKarplusStrong_getLastOut         (tKarplusStrong*  const);
    
    // ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
    
    /* Simple Living String */
    typedef struct _tSimpleLivingString {
        float freq, waveLengthInSamples;        // the frequency of the string, determining delay length
        float dampFreq;    // frequency for the bridge LP filter, in Hz
        float decay; // amplitude damping factor for the string (only active in mode 0)
        float levMode;
        float curr;
        tLinearDelay delayLine;
        tOnePole bridgeFilter;
        tHighpass DCblocker;
        tFeedbackLeveler fbLev;
        tExpSmooth wlSmooth;
    } _tSimpleLivingString;
    
    typedef _tSimpleLivingString* tSimpleLivingString;
    
    void    tSimpleLivingString_init      (tSimpleLivingString* const, float freq, float dampFreq, float decay, float targetLev, float levSmoothFactor, float levStrength, int levMode);
    void    tSimpleLivingString_free      (tSimpleLivingString* const);
    float   tSimpleLivingString_tick      (tSimpleLivingString* const, float input);
    float   tSimpleLivingString_sample    (tSimpleLivingString* const);
    void    tSimpleLivingString_setFreq               (tSimpleLivingString* const, float freq);
    void    tSimpleLivingString_setWaveLength        (tSimpleLivingString* const, float waveLength); // in samples
    void    tSimpleLivingString_setDampFreq           (tSimpleLivingString* const, float dampFreq);
    void    tSimpleLivingString_setDecay             (tSimpleLivingString* const, float decay); // should be near 1.0
    void    tSimpleLivingString_setTargetLev        (tSimpleLivingString* const, float targetLev);
    void    tSimpleLivingString_setLevSmoothFactor  (tSimpleLivingString* const, float levSmoothFactor);
    void    tSimpleLivingString_setLevStrength        (tSimpleLivingString* const, float levStrength);
    void    tSimpleLivingString_setLevMode        (tSimpleLivingString* const, int levMode);
    
    // ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
    
    /* Living String */
    typedef struct _tLivingString {
        float freq, waveLengthInSamples;        // the frequency of the whole string, determining delay length
        float pickPos;    // the pick position, dividing the string in two, in ratio
        float prepIndex;    // the amount of pressure on the pickpoint of the string (near 0=soft obj, near 1=hard obj)
        float dampFreq;    // frequency for the bridge LP filter, in Hz
        float decay; // amplitude damping factor for the string (only active in mode 0)
        float levMode;
        float curr;
        tLinearDelay delLF,delUF,delUB,delLB;    // delay for lower/upper/forward/backward part of the waveguide model
        tOnePole bridgeFilter, nutFilter, prepFilterU, prepFilterL;
        tHighpass DCblockerL, DCblockerU;
        tFeedbackLeveler fbLevU, fbLevL;
        tExpSmooth wlSmooth, ppSmooth;
    } _tLivingString;
    
    typedef _tLivingString* tLivingString;
    
    void    tLivingString_init      (tLivingString* const, float freq, float pickPos, float prepIndex, float dampFreq, float decay,
                                     float targetLev, float levSmoothFactor, float levStrength, int levMode);
    void    tLivingString_free      (tLivingString* const);
    float   tLivingString_tick      (tLivingString* const, float input);
    float   tLivingString_sample    (tLivingString* const);
    void    tLivingString_setFreq               (tLivingString* const, float freq);
    void    tLivingString_setWaveLength            (tLivingString* const, float waveLength); // in samples
    void    tLivingString_setPickPos               (tLivingString* const, float pickPos);
    void    tLivingString_setPrepIndex             (tLivingString* const, float prepIndex);
    void    tLivingString_setDampFreq           (tLivingString* const, float dampFreq);
    void    tLivingString_setDecay                 (tLivingString* const, float decay); // should be near 1.0
    void    tLivingString_setTargetLev            (tLivingString* const, float targetLev);
    void    tLivingString_setLevSmoothFactor      (tLivingString* const, float levSmoothFactor);
    void    tLivingString_setLevStrength        (tLivingString* const, float levStrength);
    void    tLivingString_setLevMode            (tLivingString* const, int levMode);
    
    // ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
    
    //Reed Table - borrowed from STK
    typedef struct _tReedTable {
        float offset, slope;
    } _tReedTable;
    
    typedef _tReedTable* tReedTable;
    
    void    tReedTable_init      (tReedTable* const, float offset, float slope);
    void    tReedTable_free      (tReedTable* const);
    float   tReedTable_tick      (tReedTable* const, float input);
    float   tReedTable_tanh_tick     (tReedTable* const p, float input); //tanh softclip version of reed table - replacing the hard clip in original stk code
    void     tReedTable_setOffset   (tReedTable* const, float offset);
    void     tReedTable_setSlope (tReedTable* const, float slope);
    
    //==============================================================================
    
#ifdef __cplusplus
}
#endif

#endif // LEAF_PHYSICAL_H_INCLUDED

//==============================================================================