ref: 01af5a89b3e1ac5c45472ef8ade9c15ffbd19925
dir: /demos/stm32f429_disco/stm/stm32f4_spl/inc/stm32f4xx_hal_dcmi.h/
/**
******************************************************************************
* @file stm32f4xx_hal_dcmi.h
* @author MCD Application Team
* @version V1.0.0
* @date 18-February-2014
* @brief Header file of DCMI HAL module.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_DCMI_H
#define __STM32F4xx_HAL_DCMI_H
#ifdef __cplusplus
extern "C" {
#endif
#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup DCMI
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief DCMI Error source
*/
typedef enum
{
DCMI_ERROR_SYNC = 1, /*!< Synchronisation error */
DCMI_OVERRUN = 2, /*!< DCMI Overrun */
}DCMI_ErrorTypeDef;
/**
* @brief DCMI Embedded Synchronisation CODE Init structure definition
*/
typedef struct
{
uint8_t FrameStartCode; /*!< Specifies the code of the frame start delimiter. */
uint8_t LineStartCode; /*!< Specifies the code of the line start delimiter. */
uint8_t LineEndCode; /*!< Specifies the code of the line end delimiter. */
uint8_t FrameEndCode; /*!< Specifies the code of the frame end delimiter. */
}DCMI_CodesInitTypeDef;
/**
* @brief DCMI Init structure definition
*/
typedef struct
{
uint32_t SynchroMode; /*!< Specifies the Synchronization Mode: Hardware or Embedded.
This parameter can be a value of @ref DCMI_Synchronization_Mode */
uint32_t PCKPolarity; /*!< Specifies the Pixel clock polarity: Falling or Rising.
This parameter can be a value of @ref DCMI_PIXCK_Polarity */
uint32_t VSPolarity; /*!< Specifies the Vertical synchronization polarity: High or Low.
This parameter can be a value of @ref DCMI_VSYNC_Polarity */
uint32_t HSPolarity; /*!< Specifies the Horizontal synchronization polarity: High or Low.
This parameter can be a value of @ref DCMI_HSYNC_Polarity */
uint32_t CaptureRate; /*!< Specifies the frequency of frame capture: All, 1/2 or 1/4.
This parameter can be a value of @ref DCMI_Capture_Rate */
uint32_t ExtendedDataMode; /*!< Specifies the data width: 8-bit, 10-bit, 12-bit or 14-bit.
This parameter can be a value of @ref DCMI_Extended_Data_Mode */
DCMI_CodesInitTypeDef SyncroCode; /*!< Specifies the code of the frame start delimiter. */
uint32_t JPEGMode; /*!< Enable or Disable the JPEG mode.
This parameter can be a value of @ref DCMI_MODE_JPEG */
}DCMI_InitTypeDef;
/**
* @brief HAL DCMI State structures definition
*/
typedef enum
{
HAL_DCMI_STATE_RESET = 0x00, /*!< DCMI not yet initialized or disabled */
HAL_DCMI_STATE_READY = 0x01, /*!< DCMI initialized and ready for use */
HAL_DCMI_STATE_BUSY = 0x02, /*!< DCMI internal processing is ongoing */
HAL_DCMI_STATE_TIMEOUT = 0x03, /*!< DCMI timeout state */
HAL_DCMI_STATE_ERROR = 0x04 /*!< DCMI error state */
}HAL_DCMI_StateTypeDef;
/**
* @brief DCMI handle Structure definition
*/
typedef struct
{
DCMI_TypeDef *Instance; /*!< DCMI Register base address */
DCMI_InitTypeDef Init; /*!< DCMI parameters */
HAL_LockTypeDef Lock; /*!< DCMI locking object */
__IO HAL_DCMI_StateTypeDef State; /*!< DCMI state */
__IO uint32_t XferCount; /*!< DMA transfer counter */
__IO uint32_t XferSize; /*!< DMA transfer size */
uint32_t XferTransferNumber; /*!< DMA transfer number */
uint32_t pBuffPtr; /*!< Pointer to DMA output buffer */
DMA_HandleTypeDef *DMA_Handle; /*!< Pointer to the DMA handler */
__IO uint32_t ErrorCode; /*!< DCMI Error code */
}DCMI_HandleTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup DCMI_Exported_Constants
* @{
*/
/** @defgroup DCMI_Error_Code
* @{
*/
#define HAL_DCMI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
#define HAL_DCMI_ERROR_OVF ((uint32_t)0x00000001) /*!< Overflow error */
#define HAL_DCMI_ERROR_SYNC ((uint32_t)0x00000002) /*!< Synchronization error */
#define HAL_DCMI_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */
/**
* @}
*/
/** @defgroup DCMI_Capture_Mode
* @{
*/
#define DCMI_MODE_CONTINUOUS ((uint32_t)0x00000000) /*!< The received data are transferred continuously
into the destination memory through the DMA */
#define DCMI_MODE_SNAPSHOT ((uint32_t)DCMI_CR_CM) /*!< Once activated, the interface waits for the start of
frame and then transfers a single frame through the DMA */
#define IS_DCMI_CAPTURE_MODE(MODE)(((MODE) == DCMI_MODE_CONTINUOUS) || \
((MODE) == DCMI_MODE_SNAPSHOT))
/**
* @}
*/
/** @defgroup DCMI_Synchronization_Mode
* @{
*/
#define DCMI_SYNCHRO_HARDWARE ((uint32_t)0x00000000) /*!< Hardware synchronization data capture (frame/line start/stop)
is synchronized with the HSYNC/VSYNC signals */
#define DCMI_SYNCHRO_EMBEDDED ((uint32_t)DCMI_CR_ESS) /*!< Embedded synchronization data capture is synchronized with
synchronization codes embedded in the data flow */
#define IS_DCMI_SYNCHRO(MODE)(((MODE) == DCMI_SYNCHRO_HARDWARE) || \
((MODE) == DCMI_SYNCHRO_EMBEDDED))
/**
* @}
*/
/** @defgroup DCMI_PIXCK_Polarity
* @{
*/
#define DCMI_PCKPOLARITY_FALLING ((uint32_t)0x00000000) /*!< Pixel clock active on Falling edge */
#define DCMI_PCKPOLARITY_RISING ((uint32_t)DCMI_CR_PCKPOL) /*!< Pixel clock active on Rising edge */
#define IS_DCMI_PCKPOLARITY(POLARITY)(((POLARITY) == DCMI_PCKPOLARITY_FALLING) || \
((POLARITY) == DCMI_PCKPOLARITY_RISING))
/**
* @}
*/
/** @defgroup DCMI_VSYNC_Polarity
* @{
*/
#define DCMI_VSPOLARITY_LOW ((uint32_t)0x00000000) /*!< Vertical synchronization active Low */
#define DCMI_VSPOLARITY_HIGH ((uint32_t)DCMI_CR_VSPOL) /*!< Vertical synchronization active High */
#define IS_DCMI_VSPOLARITY(POLARITY)(((POLARITY) == DCMI_VSPOLARITY_LOW) || \
((POLARITY) == DCMI_VSPOLARITY_HIGH))
/**
* @}
*/
/** @defgroup DCMI_HSYNC_Polarity
* @{
*/
#define DCMI_HSPOLARITY_LOW ((uint32_t)0x00000000) /*!< Horizontal synchronization active Low */
#define DCMI_HSPOLARITY_HIGH ((uint32_t)DCMI_CR_HSPOL) /*!< Horizontal synchronization active High */
#define IS_DCMI_HSPOLARITY(POLARITY)(((POLARITY) == DCMI_HSPOLARITY_LOW) || \
((POLARITY) == DCMI_HSPOLARITY_HIGH))
/**
* @}
*/
/** @defgroup DCMI_MODE_JPEG
* @{
*/
#define DCMI_JPEG_DISABLE ((uint32_t)0x00000000) /*!< Mode JPEG Disabled */
#define DCMI_JPEG_ENABLE ((uint32_t)DCMI_CR_JPEG) /*!< Mode JPEG Enabled */
#define IS_DCMI_MODE_JPEG(JPEG_MODE)(((JPEG_MODE) == DCMI_JPEG_DISABLE) || \
((JPEG_MODE) == DCMI_JPEG_ENABLE))
/**
* @}
*/
/** @defgroup DCMI_Capture_Rate
* @{
*/
#define DCMI_CR_ALL_FRAME ((uint32_t)0x00000000) /*!< All frames are captured */
#define DCMI_CR_ALTERNATE_2_FRAME ((uint32_t)DCMI_CR_FCRC_0) /*!< Every alternate frame captured */
#define DCMI_CR_ALTERNATE_4_FRAME ((uint32_t)DCMI_CR_FCRC_1) /*!< One frame in 4 frames captured */
#define IS_DCMI_CAPTURE_RATE(RATE) (((RATE) == DCMI_CR_ALL_FRAME) || \
((RATE) == DCMI_CR_ALTERNATE_2_FRAME) || \
((RATE) == DCMI_CR_ALTERNATE_4_FRAME))
/**
* @}
*/
/** @defgroup DCMI_Extended_Data_Mode
* @{
*/
#define DCMI_EXTEND_DATA_8B ((uint32_t)0x00000000) /*!< Interface captures 8-bit data on every pixel clock */
#define DCMI_EXTEND_DATA_10B ((uint32_t)DCMI_CR_EDM_0) /*!< Interface captures 10-bit data on every pixel clock */
#define DCMI_EXTEND_DATA_12B ((uint32_t)DCMI_CR_EDM_1) /*!< Interface captures 12-bit data on every pixel clock */
#define DCMI_EXTEND_DATA_14B ((uint32_t)(DCMI_CR_EDM_0 | DCMI_CR_EDM_1)) /*!< Interface captures 14-bit data on every pixel clock */
#define IS_DCMI_EXTENDED_DATA(DATA)(((DATA) == DCMI_EXTEND_DATA_8B) || \
((DATA) == DCMI_EXTEND_DATA_10B) || \
((DATA) == DCMI_EXTEND_DATA_12B) || \
((DATA) == DCMI_EXTEND_DATA_14B))
/**
* @}
*/
/** @defgroup DCMI_Window_Coordinate
* @{
*/
#define DCMI_WINDOW_COORDINATE ((uint32_t)0x3FFF) /*!< Window coordinate */
#define IS_DCMI_WINDOW_COORDINATE(COORDINATE) ((COORDINATE) <= DCMI_WINDOW_COORDINATE)
/**
* @}
*/
/** @defgroup DCMI_Window_Height
* @{
*/
#define DCMI_WINDOW_HEIGHT ((uint32_t)0x1FFF) /*!< Window Height */
#define IS_DCMI_WINDOW_HEIGHT(HEIGHT) ((HEIGHT) <= DCMI_WINDOW_HEIGHT)
/**
* @}
*/
/** @defgroup DCMI_interrupt_sources
* @{
*/
#define DCMI_IT_FRAME ((uint32_t)DCMI_IER_FRAME_IE)
#define DCMI_IT_OVF ((uint32_t)DCMI_IER_OVF_IE)
#define DCMI_IT_ERR ((uint32_t)DCMI_IER_ERR_IE)
#define DCMI_IT_VSYNC ((uint32_t)DCMI_IER_VSYNC_IE)
#define DCMI_IT_LINE ((uint32_t)DCMI_IER_LINE_IE)
#define IS_DCMI_CONFIG_IT(IT) ((((IT) & (uint16_t)0xFFE0) == 0x0000) && ((IT) != 0x0000))
#define IS_DCMI_GET_IT(IT) (((IT) == DCMI_IT_FRAME) || \
((IT) == DCMI_IT_OVF) || \
((IT) == DCMI_IT_ERR) || \
((IT) == DCMI_IT_VSYNC) || \
((IT) == DCMI_IT_LINE))
/**
* @}
*/
/** @defgroup DCMI_Flags
* @{
*/
/**
* @brief DCMI SR register
*/
#define DCMI_FLAG_HSYNC ((uint32_t)0x2001)
#define DCMI_FLAG_VSYNC ((uint32_t)0x2002)
#define DCMI_FLAG_FNE ((uint32_t)0x2004)
/**
* @brief DCMI RISR register
*/
#define DCMI_FLAG_FRAMERI ((uint32_t)DCMI_RISR_FRAME_RIS)
#define DCMI_FLAG_OVFRI ((uint32_t)DCMI_RISR_OVF_RIS)
#define DCMI_FLAG_ERRRI ((uint32_t)DCMI_RISR_ERR_RIS)
#define DCMI_FLAG_VSYNCRI ((uint32_t)DCMI_RISR_VSYNC_RIS)
#define DCMI_FLAG_LINERI ((uint32_t)DCMI_RISR_LINE_RIS)
/**
* @brief DCMI MISR register
*/
#define DCMI_FLAG_FRAMEMI ((uint32_t)0x1001)
#define DCMI_FLAG_OVFMI ((uint32_t)0x1002)
#define DCMI_FLAG_ERRMI ((uint32_t)0x1004)
#define DCMI_FLAG_VSYNCMI ((uint32_t)0x1008)
#define DCMI_FLAG_LINEMI ((uint32_t)0x1010)
#define IS_DCMI_GET_FLAG(FLAG) (((FLAG) == DCMI_FLAG_HSYNC) || \
((FLAG) == DCMI_FLAG_VSYNC) || \
((FLAG) == DCMI_FLAG_FNE) || \
((FLAG) == DCMI_FLAG_FRAMERI) || \
((FLAG) == DCMI_FLAG_OVFRI) || \
((FLAG) == DCMI_FLAG_ERRRI) || \
((FLAG) == DCMI_FLAG_VSYNCRI) || \
((FLAG) == DCMI_FLAG_LINERI) || \
((FLAG) == DCMI_FLAG_FRAMEMI) || \
((FLAG) == DCMI_FLAG_OVFMI) || \
((FLAG) == DCMI_FLAG_ERRMI) || \
((FLAG) == DCMI_FLAG_VSYNCMI) || \
((FLAG) == DCMI_FLAG_LINEMI))
#define IS_DCMI_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFE0) == 0x0000) && ((FLAG) != 0x0000))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/**
* @brief Enable the DCMI.
* @param __HANDLE__: DCMI handle
* @retval None
*/
#define __HAL_DCMI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DCMI_CR_ENABLE)
/**
* @brief Disable the DCMI.
* @param __HANDLE__: DCMI handle
* @retval None
*/
#define __HAL_DCMI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(DCMI_CR_ENABLE))
/* Interrupt & Flag management */
/**
* @brief Get the DCMI pending flags.
* @param __HANDLE__: DCMI handle
* @param __FLAG__: Get the specified flag.
* This parameter can be any combination of the following values:
* @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask
* @arg DCMI_FLAG_OVFRI: Overflow flag mask
* @arg DCMI_FLAG_ERRRI: Synchronization error flag mask
* @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask
* @arg DCMI_FLAG_LINERI: Line flag mask
* @retval The state of FLAG.
*/
#define __HAL_DCMI_GET_FLAG(__HANDLE__, __FLAG__)\
((((__FLAG__) & 0x3000) == 0x0)? ((__HANDLE__)->Instance->RISR & (__FLAG__)) :\
(((__FLAG__) & 0x2000) == 0x0)? ((__HANDLE__)->Instance->MISR & (__FLAG__)) : ((__HANDLE__)->Instance->SR & (__FLAG__)))
/**
* @brief Clear the DCMI pending flags.
* @param __HANDLE__: DCMI handle
* @param __FLAG__: specifies the flag to clear.
* This parameter can be any combination of the following values:
* @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask
* @arg DCMI_FLAG_OVFRI: Overflow flag mask
* @arg DCMI_FLAG_ERRRI: Synchronization error flag mask
* @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask
* @arg DCMI_FLAG_LINERI: Line flag mask
* @retval None
*/
#define __HAL_DCMI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR |= (__FLAG__))
/**
* @brief Enable the specified DCMI interrupts.
* @param __HANDLE__: DCMI handle
* @param __INTERRUPT__: specifies the DCMI interrupt sources to be enabled.
* This parameter can be any combination of the following values:
* @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
* @arg DCMI_IT_OVF: Overflow interrupt mask
* @arg DCMI_IT_ERR: Synchronization error interrupt mask
* @arg DCMI_IT_VSYNC: VSYNC interrupt mask
* @arg DCMI_IT_LINE: Line interrupt mask
* @retval None
*/
#define __HAL_DCMI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
/**
* @brief Disable the specified DCMI interrupts.
* @param __HANDLE__: DCMI handle
* @param __INTERRUPT__: specifies the DCMI interrupt sources to be enabled.
* This parameter can be any combination of the following values:
* @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
* @arg DCMI_IT_OVF: Overflow interrupt mask
* @arg DCMI_IT_ERR: Synchronization error interrupt mask
* @arg DCMI_IT_VSYNC: VSYNC interrupt mask
* @arg DCMI_IT_LINE: Line interrupt mask
* @retval None
*/
#define __HAL_DCMI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__))
/**
* @brief Check whether the specified DCMI interrupt has occurred or not.
* @param __HANDLE__: DCMI handle
* @param __INTERRUPT__: specifies the DCMI interrupt source to check.
* This parameter can be one of the following values:
* @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
* @arg DCMI_IT_OVF: Overflow interrupt mask
* @arg DCMI_IT_ERR: Synchronization error interrupt mask
* @arg DCMI_IT_VSYNC: VSYNC interrupt mask
* @arg DCMI_IT_LINE: Line interrupt mask
* @retval The state of INTERRUPT.
*/
#define __HAL_DCMI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MISR & (__INTERRUPT__))
/* Exported functions --------------------------------------------------------*/
/* Initialization and de-initialization functions *******************************/
HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi);
HAL_StatusTypeDef HAL_DCMI_DeInit(DCMI_HandleTypeDef *hdcmi);
void HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi);
void HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi);
/* IO operation functions *******************************************************/
HAL_StatusTypeDef HAL_DCMI_Start_DMA(DCMI_HandleTypeDef* hdcmi, uint32_t DCMI_Mode, uint32_t pData, uint32_t Length);
HAL_StatusTypeDef HAL_DCMI_Stop(DCMI_HandleTypeDef* hdcmi);
void HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi);
void HAL_DCMI_LineEventCallback(DCMI_HandleTypeDef *hdcmi);
void HAL_DCMI_FrameEventCallback(DCMI_HandleTypeDef *hdcmi);
void HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi);
void HAL_DCMI_IRQHandler(DCMI_HandleTypeDef *hdcmi);
/* Peripheral Control functions *************************************************/
HAL_StatusTypeDef HAL_DCMI_ConfigCROP(DCMI_HandleTypeDef *hdcmi, uint32_t X0, uint32_t Y0, uint32_t XSize, uint32_t YSize);
HAL_StatusTypeDef HAL_DCMI_EnableCROP(DCMI_HandleTypeDef *hdcmi);
HAL_StatusTypeDef HAL_DCMI_DisableCROP(DCMI_HandleTypeDef *hdcmi);
/* Peripheral State functions ***************************************************/
HAL_DCMI_StateTypeDef HAL_DCMI_GetState(DCMI_HandleTypeDef *hdcmi);
uint32_t HAL_DCMI_GetError(DCMI_HandleTypeDef *hdcmi);
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_DCMI_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/