ref: 4546c5b04d9ed617a64970568acd58eef8d0666e
dir: /demos/stm32f429_disco/stm/stm32f4_spl/inc/stm32f4xx_hal_hcd.h/
/**
******************************************************************************
* @file stm32f4xx_hal_hcd.h
* @author MCD Application Team
* @version V1.0.0
* @date 18-February-2014
* @brief Header file of HCD HAL module.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_HCD_H
#define __STM32F4xx_HAL_HCD_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_ll_usb.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup HCD
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief HCD Status structures structure definition
*/
typedef enum
{
HCD_READY = 0x00,
HCD_ERROR = 0x01,
HCD_BUSY = 0x02,
HCD_TIMEOUT = 0x03
} HCD_StateTypeDef;
typedef USB_OTG_GlobalTypeDef HCD_TypeDef;
typedef USB_OTG_CfgTypeDef HCD_InitTypeDef;
typedef USB_OTG_HCTypeDef HCD_HCTypeDef ;
typedef USB_OTG_URBStateTypeDef HCD_URBStateTypeDef ;
typedef USB_OTG_HCStateTypeDef HCD_HCStateTypeDef ;
/**
* @brief HCD Handle Structure definition
*/
typedef struct
{
HCD_TypeDef *Instance; /*!< Register base address */
HCD_InitTypeDef Init; /*!< HCD required parameters */
HCD_HCTypeDef hc[15]; /*!< Host channels parameters */
HAL_LockTypeDef Lock; /*!< HCD peripheral status */
__IO HCD_StateTypeDef State; /*!< HCD communication state */
void *pData; /*!< Pointer Stack Handler */
} HCD_HandleTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup HCD_Exported_Constants
* @{
*/
/** @defgroup HCD_Instance_definition
* @{
*/
#define __HAL_HCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
#define __HAL_HCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) |= (__INTERRUPT__))
#define __HAL_HCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0)
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
#define IS_HCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS) || \
((INSTANCE) == USB_OTG_HS))
#elif defined(STM32F401xC) || defined(STM32F401xE)
#define IS_HCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS))
#endif
/**
* @}
*/
/** @defgroup HCD_Speed
* @{
*/
#define HCD_SPEED_HIGH 0
#define HCD_SPEED_LOW 2
#define HCD_SPEED_FULL 3
/**
* @}
*/
/** @defgroup HCD_PHY_Module
* @{
*/
#define HCD_PHY_ULPI 1
#define HCD_PHY_EMBEDDED 2
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup HCD_Interrupt_Clock
* @brief macros to handle interrupts and specific clock configurations
* @{
*/
#define __HAL_HCD_ENABLE(__HANDLE__) USB_EnableGlobalInt ((__HANDLE__)->Instance)
#define __HAL_HCD_DISABLE(__HANDLE__) USB_DisableGlobalInt ((__HANDLE__)->Instance)
#define __HAL_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
#define __HAL_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) |= (__INTERRUPT__))
#define __HAL_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0)
#define __HAL_HCD_CLEAR_HC_INT(chnum, __INTERRUPT__) (USBx_HC(chnum)->HCINT = (__INTERRUPT__))
#define __HAL_HCD_MASK_HALT_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_CHHM)
#define __HAL_HCD_UNMASK_HALT_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_CHHM)
#define __HAL_HCD_MASK_ACK_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_ACKM)
#define __HAL_HCD_UNMASK_ACK_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_ACKM)
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/* Initialization/de-initialization functions **********************************/
HAL_StatusTypeDef HAL_HCD_Init(HCD_HandleTypeDef *hhcd);
HAL_StatusTypeDef HAL_HCD_DeInit (HCD_HandleTypeDef *hhcd);
HAL_StatusTypeDef HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd,
uint8_t ch_num,
uint8_t epnum,
uint8_t dev_address,
uint8_t speed,
uint8_t ep_type,
uint16_t mps);
HAL_StatusTypeDef HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd,
uint8_t ch_num);
void HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd);
void HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd);
/* I/O operation functions *****************************************************/
HAL_StatusTypeDef HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd,
uint8_t pipe,
uint8_t direction ,
uint8_t ep_type,
uint8_t token,
uint8_t* pbuff,
uint16_t length,
uint8_t do_ping);
/* Non-Blocking mode: Interrupt */
void HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd);
void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd);
void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd);
void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd);
void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd,
uint8_t chnum,
HCD_URBStateTypeDef urb_state);
/* Peripheral Control functions ************************************************/
HAL_StatusTypeDef HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd);
HAL_StatusTypeDef HAL_HCD_Start(HCD_HandleTypeDef *hhcd);
HAL_StatusTypeDef HAL_HCD_Stop(HCD_HandleTypeDef *hhcd);
/* Peripheral State functions **************************************************/
HCD_StateTypeDef HAL_HCD_GetState(HCD_HandleTypeDef *hhcd);
HCD_URBStateTypeDef HAL_HCD_HC_GetURBState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
uint32_t HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum);
HCD_HCStateTypeDef HAL_HCD_HC_GetState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
uint32_t HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd);
uint32_t HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd);
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_HCD_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/