ref: 504fa350e718a379f4a0ae764a80d1d8dd1b959b
dir: /demos/stm32f429_disco/stm/stm32f429/stm32f429i_discovery_lcd.c/
/**
******************************************************************************
* @file stm32f429i_discovery_lcd.c
* @author MCD Application Team
* @version V2.0.1
* @date 26-February-2014
* @brief This file includes the LCD driver for ILI9341 Liquid Crystal
* Display Modules of STM32F429I-DISCO kit (MB1075).
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* File Info : -----------------------------------------------------------------
User NOTES
1. How To use this driver:
--------------------------
- This driver is used to drive directly an LCD TFT using LTDC controller.
- This driver select dynamically the mounted LCD, ILI9341 240x320 LCD mounted
on MB1075B discovery board, and use the adequate timing and setting for
the specified LCD using device ID of the ILI9341 mounted on MB1075B discovery board
2. Driver description:
---------------------
+ Initialisation steps :
o Initialise the LCD using the LCD_Init() function.
o Apply the Layer configuration using LCD_LayerDefaultInit() function
o Select the LCD layer to be used using LCD_SelectLayer() function.
o Enable the LCD display using LCD_DisplayOn() function.
+ options
o Configure and enable the color keying functionality using LCD_SetColorKeying()
function.
o Modify in the fly the transparency and/or the frame buffer address
using the following functions :
- LCD_SetTransparency()
- LCD_SetLayerAddress()
+ Display on LCD
o Clear the hole LCD using LCD_Clear() function or only one specified string
line using LCD_ClearStringLine() function.
o Display a character on the specified line and column using LCD_DisplayChar()
function or a complete string line using LCD_DisplayStringAtLine() function.
o Display a string line on the specified position (x,y in pixel) and align mode
using LCD_DisplayStringAtLine() function.
o Draw and fill a basic shapes (dot, line, rectangle, cercle, ellipse, .. bitmap)
on LCD using the available set of functions
------------------------------------------------------------------------------*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f429i_discovery_lcd.h"
/** @addtogroup BSP
* @{
*/
/** @addtogroup STM32F429I_DISCOVERY
* @{
*/
/** @defgroup STM32F429I_DISCOVERY_LCD STM32F429I_DISCOVERY_LCD
* @brief This file includes the LCD driver for (ILI9341)
* @{
*/
/** @defgroup STM32F429I_DISCOVERY_LCD_Private_TypesDefinitions STM32F429I_DISCOVERY_LCD_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup STM32F429I_DISCOVERY_LCD_Private_Defines STM32F429I_DISCOVERY_LCD_Private_Defines
* @{
*/
#define POLY_X(Z) ((int32_t)((Points + Z)->X))
#define POLY_Y(Z) ((int32_t)((Points + Z)->Y))
/**
* @}
*/
/** @defgroup STM32F429I_DISCOVERY_LCD_Private_Macros STM32F429I_DISCOVERY_LCD_Private_Macros
* @{
*/
#define ABS(X) ((X) > 0 ? (X) : -(X))
/**
* @}
*/
/** @defgroup STM32F429I_DISCOVERY_LCD_Private_Variables STM32F429I_DISCOVERY_LCD_Private_Variables
* @{
*/
static LTDC_HandleTypeDef LtdcHandler;
static DMA2D_HandleTypeDef Dma2dHandler;
static RCC_PeriphCLKInitTypeDef PeriphClkInitStruct;
/* Default LCD configuration with LCD Layer 1 */
static uint32_t ActiveLayer = 0;
static LCD_DrawPropTypeDef DrawProp[MAX_LAYER_NUMBER];
LCD_DrvTypeDef *LcdDrv;
/**
* @}
*/
/** @defgroup STM32F429I_DISCOVERY_LCD_Private_FunctionPrototypes STM32F429I_DISCOVERY_LCD_Private_FunctionPrototypes
* @{
*/
static void MspInit(void);
static void DrawChar(uint16_t Xpos, uint16_t Ypos, const uint8_t *c);
static void FillBuffer(uint32_t LayerIndex, void * pDst, uint32_t xSize, uint32_t ySize, uint32_t OffLine, uint32_t ColorIndex);
static void ConvertLineToARGB8888(void * pSrc, void * pDst, uint32_t xSize, uint32_t ColorMode);
/**
* @}
*/
/** @defgroup STM32F429I_DISCOVERY_LCD_Private_Functions STM32F429I_DISCOVERY_LCD_Private_Functions
* @{
*/
/**
* @brief Initializes the LCD.
* @param None
* @retval LCD state
*/
uint8_t BSP_LCD_Init(void)
{
/* On STM32F429I-DISCO, it is not possible to read ILI9341 ID because */
/* PIN EXTC is not connected to VDD and then LCD_READ_ID4 is not accessible. */
/* In this case, ReadID function is bypassed.*/
/*if(ili9341_drv.ReadID() == ILI9341_ID)*/
/* LTDC Configuration *********************************************************/
LtdcHandler.Instance = LTDC;
/* Timing configuration (Typical configuration from ILI9341 datasheet)
HSYNC=10 (9+1)
HBP=20 (29-10+1)
ActiveW=240 (269-20-10+1)
HFP=10 (279-240-20-10+1)
VSYNC=2 (1+1)
VBP=2 (3-2+1)
ActiveH=320 (323-2-2+1)
VFP=4 (327-320-2-2+1)
*/
/* Configure horizontal synchronization width */
LtdcHandler.Init.HorizontalSync = ILI9341_HSYNC;
/* Configure vertical synchronization height */
LtdcHandler.Init.VerticalSync = ILI9341_VSYNC;
/* Configure accumulated horizontal back porch */
LtdcHandler.Init.AccumulatedHBP = ILI9341_HBP;
/* Configure accumulated vertical back porch */
LtdcHandler.Init.AccumulatedVBP = ILI9341_VBP;
/* Configure accumulated active width */
LtdcHandler.Init.AccumulatedActiveW = 269;
/* Configure accumulated active height */
LtdcHandler.Init.AccumulatedActiveH = 323;
/* Configure total width */
LtdcHandler.Init.TotalWidth = 279;
/* Configure total height */
LtdcHandler.Init.TotalHeigh = 327;
/* Configure R,G,B component values for LCD background color */
LtdcHandler.Init.Backcolor.Red= 0;
LtdcHandler.Init.Backcolor.Blue= 0;
LtdcHandler.Init.Backcolor.Green= 0;
/* LCD clock configuration */
/* PLLSAI_VCO Input = HSE_VALUE/PLL_M = 1 Mhz */
/* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN = 192 Mhz */
/* PLLLCDCLK = PLLSAI_VCO Output/PLLSAIR = 192/4 = 48 Mhz */
/* LTDC clock frequency = PLLLCDCLK / LTDC_PLLSAI_DIVR_8 = 48/4 = 6Mhz */
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_LTDC;
PeriphClkInitStruct.PLLSAI.PLLSAIN = 192;
PeriphClkInitStruct.PLLSAI.PLLSAIR = 4;
PeriphClkInitStruct.PLLSAIDivR = RCC_PLLSAIDIVR_8;
HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
/* Polarity */
LtdcHandler.Init.HSPolarity = LTDC_HSPOLARITY_AL;
LtdcHandler.Init.VSPolarity = LTDC_VSPOLARITY_AL;
LtdcHandler.Init.DEPolarity = LTDC_DEPOLARITY_AL;
LtdcHandler.Init.PCPolarity = LTDC_PCPOLARITY_IPC;
MspInit();
HAL_LTDC_Init(&LtdcHandler);
/* Select the device */
LcdDrv = &ili9341_drv;
/* LCD Init */
LcdDrv->Init();
/* Initialize the SDRAM */
BSP_SDRAM_Init();
/* Initialize the font */
BSP_LCD_SetFont(&Font16);
return LCD_OK;
}
/**
* @brief Gets the lcd X size.
* @param None.
* @retval the used lcd X size
*/
uint32_t BSP_LCD_GetXSize(void)
{
return LcdDrv->GetLcdPixelWidth();
}
/**
* @brief Gets the lcd Y size.
* @param None.
* @retval the used lcd Y size
*/
uint32_t BSP_LCD_GetYSize(void)
{
return LcdDrv->GetLcdPixelHeight();
}
/**
* @brief Initialise the LCD layers.
* @param LayerIndex: specifies the Layer foreground or background.
* @param FB_Address: specifies the layer frame buffer.
* @retval None
*/
void BSP_LCD_LayerDefaultInit(uint16_t LayerIndex, uint32_t FB_Address)
{
LCD_LayerCfgTypeDef Layercfg;
/* Layer Init */
Layercfg.WindowX0 = 0;
Layercfg.WindowX1 = BSP_LCD_GetXSize();
Layercfg.WindowY0 = 0;
Layercfg.WindowY1 = BSP_LCD_GetYSize();
Layercfg.PixelFormat = LTDC_PIXEL_FORMAT_ARGB8888;
Layercfg.FBStartAdress = FB_Address;
Layercfg.Alpha = 255;
Layercfg.Alpha0 = 0;
Layercfg.Backcolor.Blue = 0;
Layercfg.Backcolor.Green = 0;
Layercfg.Backcolor.Red = 0;
Layercfg.BlendingFactor1 = LTDC_BLENDING_FACTOR1_PAxCA;
Layercfg.BlendingFactor2 = LTDC_BLENDING_FACTOR2_PAxCA;
Layercfg.ImageWidth = BSP_LCD_GetXSize();
Layercfg.ImageHeight = BSP_LCD_GetYSize();
HAL_LTDC_ConfigLayer(&LtdcHandler, &Layercfg, LayerIndex);
DrawProp[LayerIndex].BackColor = LCD_COLOR_WHITE;
DrawProp[LayerIndex].pFont = &Font16;
DrawProp[LayerIndex].TextColor = LCD_COLOR_BLACK;
/* dithering activation */
HAL_LTDC_EnableDither(&LtdcHandler);
}
/**
* @brief Select the LCD Layer.
* @param LayerIndex: specifies the Layer foreground or background.
* @retval None
*/
void BSP_LCD_SelectLayer(uint32_t LayerIndex)
{
ActiveLayer = LayerIndex;
}
/**
* @brief Sets a LCD Layer visible.
* @param LayerIndex: specifies the visible Layer.
* @param state: new state of the specified layer.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void BSP_LCD_SetLayerVisible(uint32_t LayerIndex, FunctionalState state)
{
if(state == ENABLE)
{
__HAL_LTDC_LAYER_ENABLE(&LtdcHandler, LayerIndex);
}
else
{
__HAL_LTDC_LAYER_DISABLE(&LtdcHandler, LayerIndex);
}
__HAL_LTDC_RELOAD_CONFIG(&LtdcHandler);
}
/**
* @brief Configure the Transparency.
* @param LayerIndex: specifies the Layer foreground or background.
* @param Transparency: specifies the Transparency,
* This parameter must range from 0x00 to 0xFF.
* @retval None
*/
void BSP_LCD_SetTransparency(uint32_t LayerIndex, uint8_t Transparency)
{
HAL_LTDC_SetAlpha(&LtdcHandler, Transparency, LayerIndex);
}
/**
* @brief Set a LCD layer frame buffer address.
* @param LayerIndex: specifies the Layer foreground or background.
* @param Address: new LCD frame buffer value.
* @retval None
*/
void BSP_LCD_SetLayerAddress(uint32_t LayerIndex, uint32_t Address)
{
HAL_LTDC_SetAddress(&LtdcHandler, Address, LayerIndex);
}
/**
* @brief Set Display window.
* @param LayerIndex: layer index
* @param Xpos: LCD X position.
* @param Ypos: LCD Y position.
* @param Width: LCD window width.
* @param Height: LCD window height.
* @retval None.
*/
void BSP_LCD_SetLayerWindow(uint16_t LayerIndex, uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height)
{
/* reconfigure the layer size */
HAL_LTDC_SetWindowSize(&LtdcHandler, Width, Height, LayerIndex);
/* reconfigure the layer position */
HAL_LTDC_SetWindowPosition(&LtdcHandler, Xpos, Ypos, LayerIndex);
}
/**
* @brief Configure and Sets the color Keying.
* @param LayerIndex: specifies the Layer foreground or background.
* @param RGBValue: specifies the Color reference.
* @retval None
*/
void BSP_LCD_SetColorKeying(uint32_t LayerIndex, uint32_t RGBValue)
{
/* Configure and Enable the color Keying for LCD Layer */
HAL_LTDC_ConfigColorKeying(&LtdcHandler, RGBValue, LayerIndex);
HAL_LTDC_EnableColorKeying(&LtdcHandler, LayerIndex);
}
/**
* @brief Disable the color Keying.
* @param LayerIndex: specifies the Layer foreground or background.
* @retval None
*/
void BSP_LCD_ResetColorKeying(uint32_t LayerIndex)
{
/* Disable the color Keying for LCD Layer */
HAL_LTDC_DisableColorKeying(&LtdcHandler, LayerIndex);
}
/**
* @brief Gets the LCD Text color.
* @param None.
* @retval Text color.
*/
uint32_t BSP_LCD_GetTextColor(void)
{
return DrawProp[ActiveLayer].TextColor;
}
/**
* @brief Gets the LCD Background color.
* @param None.
* @retval background color.
*/
uint32_t BSP_LCD_GetBackColor(void)
{
return DrawProp[ActiveLayer].BackColor;
}
/**
* @brief Sets the Text color.
* @param Color: specifies the Text color code ARGB(8-8-8-8).
* @retval None
*/
void BSP_LCD_SetTextColor(uint32_t Color)
{
DrawProp[ActiveLayer].TextColor = Color;
}
/**
* @brief Sets the Background color.
* @param Color: specifies the layer Background color code ARGB(8-8-8-8).
* @retval None
*/
void BSP_LCD_SetBackColor(uint32_t Color)
{
DrawProp[ActiveLayer].BackColor = Color;
}
/**
* @brief Sets the Text Font.
* @param pFonts: specifies the layer font to be used.
* @retval None
*/
void BSP_LCD_SetFont(sFONT *pFonts)
{
DrawProp[ActiveLayer].pFont = pFonts;
}
/**
* @brief Gets the Text Font.
* @param None.
* @retval the used layer font.
*/
sFONT *BSP_LCD_GetFont(void)
{
return DrawProp[ActiveLayer].pFont;
}
/**
* @brief Read Pixel.
* @param Xpos: specifies the X position.
* @param Ypos: specifies the Y position.
* @retval RGB pixel color.
*/
uint32_t BSP_LCD_ReadPixel(uint16_t Xpos, uint16_t Ypos)
{
uint32_t ret = 0;
if(LtdcHandler.LayerCfg[ActiveLayer].PixelFormat == LTDC_PIXEL_FORMAT_ARGB8888)
{
/* Read data value from SDRAM memory */
ret = *(__IO uint32_t*) (LtdcHandler.LayerCfg[ActiveLayer].FBStartAdress + (2*(Ypos*BSP_LCD_GetXSize() + Xpos)));
}
else if(LtdcHandler.LayerCfg[ActiveLayer].PixelFormat == LTDC_PIXEL_FORMAT_RGB888)
{
/* Read data value from SDRAM memory */
ret = (*(__IO uint32_t*) (LtdcHandler.LayerCfg[ActiveLayer].FBStartAdress + (2*(Ypos*BSP_LCD_GetXSize() + Xpos))) & 0x00FFFFFF);
}
else if((LtdcHandler.LayerCfg[ActiveLayer].PixelFormat == LTDC_PIXEL_FORMAT_RGB565) || \
(LtdcHandler.LayerCfg[ActiveLayer].PixelFormat == LTDC_PIXEL_FORMAT_ARGB4444) || \
(LtdcHandler.LayerCfg[ActiveLayer].PixelFormat == LTDC_PIXEL_FORMAT_AL88))
{
/* Read data value from SDRAM memory */
ret = *(__IO uint16_t*) (LtdcHandler.LayerCfg[ActiveLayer].FBStartAdress + (2*(Ypos*BSP_LCD_GetXSize() + Xpos)));
}
else
{
/* Read data value from SDRAM memory */
ret = *(__IO uint8_t*) (LtdcHandler.LayerCfg[ActiveLayer].FBStartAdress + (2*(Ypos*BSP_LCD_GetXSize() + Xpos)));
}
return ret;
}
/**
* @brief Clears the hole LCD.
* @param Color: the color of the background.
* @retval None
*/
void BSP_LCD_Clear(uint32_t Color)
{
/* Clear the LCD */
FillBuffer(ActiveLayer, (uint32_t *)(LtdcHandler.LayerCfg[ActiveLayer].FBStartAdress), BSP_LCD_GetXSize(), BSP_LCD_GetYSize(), 0, Color);
}
/**
* @brief Clears the selected line.
* @param Line: Line to be cleared.
* @retval None
*/
void BSP_LCD_ClearStringLine(uint32_t Line)
{
uint32_t colorbackup = DrawProp[ActiveLayer].TextColor;
DrawProp[ActiveLayer].TextColor = DrawProp[ActiveLayer].BackColor;
/* Draw rectangle with background color */
BSP_LCD_FillRect(0, (Line * DrawProp[ActiveLayer].pFont->Height), BSP_LCD_GetXSize(), DrawProp[ActiveLayer].pFont->Height);
DrawProp[ActiveLayer].TextColor = colorbackup;
BSP_LCD_SetTextColor(DrawProp[ActiveLayer].TextColor);
}
/**
* @brief Displays one character.
* @param Xpos: start column address.
* @param Ypos: the Line where to display the character shape.
* @param Ascii: character ascii code, must be between 0x20 and 0x7E.
* @retval None
*/
void BSP_LCD_DisplayChar(uint16_t Xpos, uint16_t Ypos, uint8_t Ascii)
{
DrawChar(Xpos, Ypos, &DrawProp[ActiveLayer].pFont->table[(Ascii-' ') *\
DrawProp[ActiveLayer].pFont->Height * ((DrawProp[ActiveLayer].pFont->Width + 7) / 8)]);
}
/**
* @brief Displays a maximum of 60 char on the LCD.
* @param X : pointer to x position (in pixel).
* @param Y: pointer to y position (in pixel).
* @param *pText: pointer to string to display on LCD.
* @param mode: The display mode.
* This parameter can be one of the following values:
* @arg CENTER_MODE
* @arg RIGHT_MODE
* @arg LEFT_MODE
* @retval None
*/
void BSP_LCD_DisplayStringAt(uint16_t X, uint16_t Y, uint8_t *pText, Text_AlignModeTypdef mode)
{
uint16_t refcolumn = 1, i = 0;
uint32_t size = 0, xsize = 0;
uint8_t *ptr = pText;
/* Get the text size */
while (*ptr++) size ++ ;
/* Characters number per line */
xsize = (BSP_LCD_GetXSize()/DrawProp[ActiveLayer].pFont->Width);
switch (mode)
{
case CENTER_MODE:
{
refcolumn = X+ ((xsize - size)* DrawProp[ActiveLayer].pFont->Width) / 2;
break;
}
case LEFT_MODE:
{
refcolumn = X;
break;
}
case RIGHT_MODE:
{
refcolumn = X + ((xsize - size)*DrawProp[ActiveLayer].pFont->Width);
break;
}
default:
{
refcolumn = X;
break;
}
}
/* Send the string character by character on lCD */
while ((*pText != 0) & (((BSP_LCD_GetXSize() - (i*DrawProp[ActiveLayer].pFont->Width)) & 0xFFFF) >= DrawProp[ActiveLayer].pFont->Width))
{
/* Display one character on LCD */
BSP_LCD_DisplayChar(refcolumn, Y, *pText);
/* Decrement the column position by 16 */
refcolumn += DrawProp[ActiveLayer].pFont->Width;
/* Point on the next character */
pText++;
i++;
}
}
/**
* @brief Displays a maximum of 20 char on the LCD.
* @param Line: the Line where to display the character shape .
* @param *ptr: pointer to string to display on LCD.
* @retval None
*/
void BSP_LCD_DisplayStringAtLine(uint16_t Line, uint8_t *ptr)
{
BSP_LCD_DisplayStringAt(0, LINE(Line), ptr, LEFT_MODE);
}
/**
* @brief Displays an horizontal line.
* @param Xpos: specifies the X position.
* @param Ypos: specifies the Y position.
* @param Length: line length.
* @retval None
*/
void BSP_LCD_DrawHLine(uint16_t Xpos, uint16_t Ypos, uint16_t Length)
{
uint32_t xaddress = 0;
/* Get the line address */
xaddress = (LtdcHandler.LayerCfg[ActiveLayer].FBStartAdress) + 4*(BSP_LCD_GetXSize()*Ypos + Xpos);
/* Write line */
FillBuffer(ActiveLayer, (uint32_t *)xaddress, Length, 1, 0, DrawProp[ActiveLayer].TextColor);
}
/**
* @brief Displays a vertical line.
* @param Xpos: specifies the X position.
* @param Ypos: specifies the Y position.
* @param Length: line length.
* @retval None
*/
void BSP_LCD_DrawVLine(uint16_t Xpos, uint16_t Ypos, uint16_t Length)
{
uint32_t xaddress = 0;
/* Get the line address */
xaddress = (LtdcHandler.LayerCfg[ActiveLayer].FBStartAdress) + 4*(BSP_LCD_GetXSize()*Ypos + Xpos);
/* Write line */
FillBuffer(ActiveLayer, (uint32_t *)xaddress, 1, Length, (BSP_LCD_GetXSize() - 1), DrawProp[ActiveLayer].TextColor);
}
/**
* @brief Displays an uni-line (between two points).
* @param X1: specifies the point 1 x position.
* @param Y1: specifies the point 1 y position.
* @param X2: specifies the point 2 x position.
* @param Y2: specifies the point 2 y position.
* @retval None
*/
void BSP_LCD_DrawLine(uint16_t X1, uint16_t Y1, uint16_t X2, uint16_t Y2)
{
int16_t deltax = 0, deltay = 0, x = 0, y = 0, xinc1 = 0, xinc2 = 0,
yinc1 = 0, yinc2 = 0, den = 0, num = 0, numadd = 0, numpixels = 0,
curpixel = 0;
deltax = ABS(X2 - X1); /* The difference between the x's */
deltay = ABS(Y2 - Y1); /* The difference between the y's */
x = X1; /* Start x off at the first pixel */
y = Y1; /* Start y off at the first pixel */
if (X2 >= X1) /* The x-values are increasing */
{
xinc1 = 1;
xinc2 = 1;
}
else /* The x-values are decreasing */
{
xinc1 = -1;
xinc2 = -1;
}
if (Y2 >= Y1) /* The y-values are increasing */
{
yinc1 = 1;
yinc2 = 1;
}
else /* The y-values are decreasing */
{
yinc1 = -1;
yinc2 = -1;
}
if (deltax >= deltay) /* There is at least one x-value for every y-value */
{
xinc1 = 0; /* Don't change the x when numerator >= denominator */
yinc2 = 0; /* Don't change the y for every iteration */
den = deltax;
num = deltax / 2;
numadd = deltay;
numpixels = deltax; /* There are more x-values than y-values */
}
else /* There is at least one y-value for every x-value */
{
xinc2 = 0; /* Don't change the x for every iteration */
yinc1 = 0; /* Don't change the y when numerator >= denominator */
den = deltay;
num = deltay / 2;
numadd = deltax;
numpixels = deltay; /* There are more y-values than x-values */
}
for (curpixel = 0; curpixel <= numpixels; curpixel++)
{
BSP_LCD_DrawPixel(x, y, DrawProp[ActiveLayer].TextColor); /* Draw the current pixel */
num += numadd; /* Increase the numerator by the top of the fraction */
if (num >= den) /* Check if numerator >= denominator */
{
num -= den; /* Calculate the new numerator value */
x += xinc1; /* Change the x as appropriate */
y += yinc1; /* Change the y as appropriate */
}
x += xinc2; /* Change the x as appropriate */
y += yinc2; /* Change the y as appropriate */
}
}
/**
* @brief Displays a rectangle.
* @param Xpos: specifies the X position.
* @param Ypos: specifies the Y position.
* @param Height: display rectangle height.
* @param Width: display rectangle width.
* @retval None
*/
void BSP_LCD_DrawRect(uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height)
{
/* draw horizontal lines */
BSP_LCD_DrawHLine(Xpos, Ypos, Width);
BSP_LCD_DrawHLine(Xpos, (Ypos+ Height), Width);
/* draw vertical lines */
BSP_LCD_DrawVLine(Xpos, Ypos, Height);
BSP_LCD_DrawVLine((Xpos + Width), Ypos, Height);
}
/**
* @brief Displays a circle.
* @param Xpos: specifies the X position.
* @param Ypos: specifies the Y position.
* @param Radius: specifies the circle radius
* @retval None
*/
void BSP_LCD_DrawCircle(uint16_t Xpos, uint16_t Ypos, uint16_t Radius)
{
int32_t d;/* Decision Variable */
uint32_t curx;/* Current X Value */
uint32_t cury;/* Current Y Value */
d = 3 - (Radius << 1);
curx = 0;
cury = Radius;
while (curx <= cury)
{
BSP_LCD_DrawPixel((Xpos + curx), (Ypos - cury), DrawProp[ActiveLayer].TextColor);
BSP_LCD_DrawPixel((Xpos - curx), (Ypos - cury), DrawProp[ActiveLayer].TextColor);
BSP_LCD_DrawPixel((Xpos + cury), (Ypos - curx), DrawProp[ActiveLayer].TextColor);
BSP_LCD_DrawPixel((Xpos - cury), (Ypos - curx), DrawProp[ActiveLayer].TextColor);
BSP_LCD_DrawPixel((Xpos + curx), (Ypos + cury), DrawProp[ActiveLayer].TextColor);
BSP_LCD_DrawPixel((Xpos - curx), (Ypos + cury), DrawProp[ActiveLayer].TextColor);
BSP_LCD_DrawPixel((Xpos + cury), (Ypos + curx), DrawProp[ActiveLayer].TextColor);
BSP_LCD_DrawPixel((Xpos - cury), (Ypos + curx), DrawProp[ActiveLayer].TextColor);
if (d < 0)
{
d += (curx << 2) + 6;
}
else
{
d += ((curx - cury) << 2) + 10;
cury--;
}
curx++;
}
}
/**
* @brief Displays an poly-line (between many points).
* @param Points: pointer to the points array.
* @param PointCount: Number of points.
* @retval None
*/
void BSP_LCD_DrawPolygon(pPoint Points, uint16_t PointCount)
{
int16_t x = 0, y = 0;
if(PointCount < 2)
{
return;
}
BSP_LCD_DrawLine(Points->X, Points->Y, (Points+PointCount-1)->X, (Points+PointCount-1)->Y);
while(--PointCount)
{
x = Points->X;
y = Points->Y;
Points++;
BSP_LCD_DrawLine(x, y, Points->X, Points->Y);
}
}
/**
* @brief Displays an Ellipse.
* @param Xpos: specifies the X position.
* @param Ypos: specifies the Y position.
* @param XRadius: specifies the X radius of ellipse.
* @param YRadius: specifies the Y radius of ellipse.
* @retval None
*/
void BSP_LCD_DrawEllipse(int Xpos, int Ypos, int XRadius, int YRadius)
{
int x = 0, y = -YRadius, err = 2-2*XRadius, e2;
float k = 0, rad1 = 0, rad2 = 0;
rad1 = XRadius;
rad2 = YRadius;
k = (float)(rad2/rad1);
do {
BSP_LCD_DrawPixel((Xpos-(uint16_t)(x/k)), (Ypos+y), DrawProp[ActiveLayer].TextColor);
BSP_LCD_DrawPixel((Xpos+(uint16_t)(x/k)), (Ypos+y), DrawProp[ActiveLayer].TextColor);
BSP_LCD_DrawPixel((Xpos+(uint16_t)(x/k)), (Ypos-y), DrawProp[ActiveLayer].TextColor);
BSP_LCD_DrawPixel((Xpos-(uint16_t)(x/k)), (Ypos-y), DrawProp[ActiveLayer].TextColor);
e2 = err;
if (e2 <= x) {
err += ++x*2+1;
if (-y == x && e2 <= y) e2 = 0;
}
if (e2 > y) err += ++y*2+1;
}
while (y <= 0);
}
/**
* @brief Displays a bitmap picture loaded in the internal Flash (32 bpp).
* @param X: specifies the bmp x position in the LCD.
* @param Y: specifies the bmp Y position in the LCD.
* @param *pBmp: Bmp picture address in the internal Flash.
* @retval None
*/
void BSP_LCD_DrawBitmap(uint32_t X, uint32_t Y, uint8_t *pBmp)
{
uint32_t index = 0, width = 0, height = 0, bitpixel = 0;
uint32_t address;
uint32_t inputcolormode = 0;
/* Get bitmap data address offset */
index = *(__IO uint16_t *) (pBmp + 10);
index |= (*(__IO uint16_t *) (pBmp + 12)) << 16;
/* Read bitmap width */
width = *(uint16_t *) (pBmp + 18);
width |= (*(uint16_t *) (pBmp + 20)) << 16;
/* Read bitmap height */
height = *(uint16_t *) (pBmp + 22);
height |= (*(uint16_t *) (pBmp + 24)) << 16;
/* Read bit/pixel */
bitpixel = *(uint16_t *) (pBmp + 28);
/* Set Address */
address = LtdcHandler.LayerCfg[ActiveLayer].FBStartAdress + (((BSP_LCD_GetXSize()*Y) + X)*(4));
/* Get the Layer pixel format */
if ((bitpixel/8) == 4)
{
inputcolormode = CM_ARGB8888;
}
else if ((bitpixel/8) == 2)
{
inputcolormode = CM_RGB565;
}
else
{
inputcolormode = CM_RGB888;
}
/* bypass the bitmap header */
pBmp += (index + (width * (height - 1) * (bitpixel/8)));
/* Convert picture to ARGB8888 pixel format */
for(index=0; index < height; index++)
{
/* Pixel format conversion */
ConvertLineToARGB8888((uint32_t *)pBmp, (uint32_t *)address, width, inputcolormode);
/* Increment the source and destination buffers */
address+= ((BSP_LCD_GetXSize() - width + width)*4);
pBmp -= width*(bitpixel/8);
}
}
/**
* @brief Displays a full rectangle.
* @param Xpos: specifies the X position.
* @param Ypos: specifies the Y position.
* @param Height: rectangle height.
* @param Width: rectangle width.
* @retval None
*/
void BSP_LCD_FillRect(uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height)
{
uint32_t xaddress = 0;
/* Set the text color */
BSP_LCD_SetTextColor(DrawProp[ActiveLayer].TextColor);
/* Get the rectangle start address */
xaddress = (LtdcHandler.LayerCfg[ActiveLayer].FBStartAdress) + 4*(BSP_LCD_GetXSize()*Ypos + Xpos);
/* Fill the rectangle */
FillBuffer(ActiveLayer, (uint32_t *)xaddress, Width, Height, (BSP_LCD_GetXSize() - Width), DrawProp[ActiveLayer].TextColor);
}
/**
* @brief Displays a full circle.
* @param Xpos: specifies the X position.
* @param Ypos: specifies the Y position.
* @param Radius: specifies the circle radius
* @retval None
*/
void BSP_LCD_FillCircle(uint16_t Xpos, uint16_t Ypos, uint16_t Radius)
{
int32_t d; /* Decision Variable */
uint32_t curx;/* Current X Value */
uint32_t cury;/* Current Y Value */
d = 3 - (Radius << 1);
curx = 0;
cury = Radius;
BSP_LCD_SetTextColor(DrawProp[ActiveLayer].TextColor);
while (curx <= cury)
{
if(cury > 0)
{
BSP_LCD_DrawHLine(Xpos - cury, Ypos + curx, 2*cury);
BSP_LCD_DrawHLine(Xpos - cury, Ypos - curx, 2*cury);
}
if(curx > 0)
{
BSP_LCD_DrawHLine(Xpos - curx, Ypos - cury, 2*curx);
BSP_LCD_DrawHLine(Xpos - curx, Ypos + cury, 2*curx);
}
if (d < 0)
{
d += (curx << 2) + 6;
}
else
{
d += ((curx - cury) << 2) + 10;
cury--;
}
curx++;
}
BSP_LCD_SetTextColor(DrawProp[ActiveLayer].TextColor);
BSP_LCD_DrawCircle(Xpos, Ypos, Radius);
}
/**
* @brief Fill triangle.
* @param X1: specifies the point 1 x position.
* @param Y1: specifies the point 1 y position.
* @param X2: specifies the point 2 x position.
* @param Y2: specifies the point 2 y position.
* @param X3: specifies the point 3 x position.
* @param Y3: specifies the point 3 y position.
* @retval None
*/
void BSP_LCD_FillTriangle(uint16_t X1, uint16_t X2, uint16_t X3, uint16_t Y1, uint16_t Y2, uint16_t Y3)
{
int16_t deltax = 0, deltay = 0, x = 0, y = 0, xinc1 = 0, xinc2 = 0,
yinc1 = 0, yinc2 = 0, den = 0, num = 0, numadd = 0, numpixels = 0,
curpixel = 0;
deltax = ABS(X2 - X1); /* The difference between the x's */
deltay = ABS(Y2 - Y1); /* The difference between the y's */
x = X1; /* Start x off at the first pixel */
y = Y1; /* Start y off at the first pixel */
if (X2 >= X1) /* The x-values are increasing */
{
xinc1 = 1;
xinc2 = 1;
}
else /* The x-values are decreasing */
{
xinc1 = -1;
xinc2 = -1;
}
if (Y2 >= Y1) /* The y-values are increasing */
{
yinc1 = 1;
yinc2 = 1;
}
else /* The y-values are decreasing */
{
yinc1 = -1;
yinc2 = -1;
}
if (deltax >= deltay) /* There is at least one x-value for every y-value */
{
xinc1 = 0; /* Don't change the x when numerator >= denominator */
yinc2 = 0; /* Don't change the y for every iteration */
den = deltax;
num = deltax / 2;
numadd = deltay;
numpixels = deltax; /* There are more x-values than y-values */
}
else /* There is at least one y-value for every x-value */
{
xinc2 = 0; /* Don't change the x for every iteration */
yinc1 = 0; /* Don't change the y when numerator >= denominator */
den = deltay;
num = deltay / 2;
numadd = deltax;
numpixels = deltay; /* There are more y-values than x-values */
}
for (curpixel = 0; curpixel <= numpixels; curpixel++)
{
BSP_LCD_DrawLine(x, y, X3, Y3);
num += numadd; /* Increase the numerator by the top of the fraction */
if (num >= den) /* Check if numerator >= denominator */
{
num -= den; /* Calculate the new numerator value */
x += xinc1; /* Change the x as appropriate */
y += yinc1; /* Change the y as appropriate */
}
x += xinc2; /* Change the x as appropriate */
y += yinc2; /* Change the y as appropriate */
}
}
/**
* @brief Displays a full poly-line (between many points).
* @param Points: pointer to the points array.
* @param PointCount: Number of points.
* @retval None
*/
void BSP_LCD_FillPolygon(pPoint Points, uint16_t PointCount)
{
int16_t x = 0, y = 0, x2 = 0, y2 = 0, xcenter = 0, ycenter = 0, xfirst = 0, yfirst = 0, pixelx = 0, pixely = 0, counter = 0;
uint16_t imageleft = 0, imageright = 0, imagetop = 0, imagebottom = 0;
imageleft = imageright = Points->X;
imagetop= imagebottom = Points->Y;
for(counter = 1; counter < PointCount; counter++)
{
pixelx = POLY_X(counter);
if(pixelx < imageleft)
{
imageleft = pixelx;
}
if(pixelx > imageright)
{
imageright = pixelx;
}
pixely = POLY_Y(counter);
if(pixely < imagetop)
{
imagetop = pixely;
}
if(pixely > imagebottom)
{
imagebottom = pixely;
}
}
if(PointCount < 2)
{
return;
}
xcenter = (imageleft + imageright)/2;
ycenter = (imagebottom + imagetop)/2;
xfirst = Points->X;
yfirst = Points->Y;
while(--PointCount)
{
x = Points->X;
y = Points->Y;
Points++;
x2 = Points->X;
y2 = Points->Y;
BSP_LCD_FillTriangle(x, x2, xcenter, y, y2, ycenter);
BSP_LCD_FillTriangle(x, xcenter, x2, y, ycenter, y2);
BSP_LCD_FillTriangle(xcenter, x2, x, ycenter, y2, y);
}
BSP_LCD_FillTriangle(xfirst, x2, xcenter, yfirst, y2, ycenter);
BSP_LCD_FillTriangle(xfirst, xcenter, x2, yfirst, ycenter, y2);
BSP_LCD_FillTriangle(xcenter, x2, xfirst, ycenter, y2, yfirst);
}
/**
* @brief Draw a full ellipse.
* @param Xpos: specifies the X position.
* @param Ypos: specifies the Y position.
* @param XRadius: X radius of ellipse.
* @param YRadius: Y radius of ellipse.
* @retval None
*/
void BSP_LCD_FillEllipse(int Xpos, int Ypos, int XRadius, int YRadius)
{
int x = 0, y = -YRadius, err = 2-2*XRadius, e2;
float K = 0, rad1 = 0, rad2 = 0;
rad1 = XRadius;
rad2 = YRadius;
K = (float)(rad2/rad1);
do
{
BSP_LCD_DrawHLine((Xpos-(uint16_t)(x/K)), (Ypos+y), (2*(uint16_t)(x/K) + 1));
BSP_LCD_DrawHLine((Xpos-(uint16_t)(x/K)), (Ypos-y), (2*(uint16_t)(x/K) + 1));
e2 = err;
if (e2 <= x)
{
err += ++x*2+1;
if (-y == x && e2 <= y) e2 = 0;
}
if (e2 > y) err += ++y*2+1;
}
while (y <= 0);
}
/**
* @brief Enables the Display.
* @param None
* @retval None
*/
void BSP_LCD_DisplayOn(void)
{
if(LcdDrv->DisplayOn != NULL)
{
LcdDrv->DisplayOn();
}
}
/**
* @brief Disables the Display.
* @param None
* @retval None
*/
void BSP_LCD_DisplayOff(void)
{
if(LcdDrv->DisplayOff != NULL)
{
LcdDrv->DisplayOff();
}
}
/*******************************************************************************
LTDC and DMA2D BSP Routines
*******************************************************************************/
/**
* @brief Initializes the LTDC MSP.
* @param None.
* @retval None.
*/
static void MspInit(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
/* Enable the LTDC and DMA2D Clock */
__LTDC_CLK_ENABLE();
__DMA2D_CLK_ENABLE();
/* Enable GPIOs clock */
__GPIOA_CLK_ENABLE();
__GPIOB_CLK_ENABLE();
__GPIOC_CLK_ENABLE();
__GPIOD_CLK_ENABLE();
__GPIOF_CLK_ENABLE();
__GPIOG_CLK_ENABLE();
/* GPIOs Configuration */
/*
+------------------------+-----------------------+----------------------------+
+ LCD pins assignment +
+------------------------+-----------------------+----------------------------+
| LCD_TFT R2 <-> PC.10 | LCD_TFT G2 <-> PA.06 | LCD_TFT B2 <-> PD.06 |
| LCD_TFT R3 <-> PB.00 | LCD_TFT G3 <-> PG.10 | LCD_TFT B3 <-> PG.11 |
| LCD_TFT R4 <-> PA.11 | LCD_TFT G4 <-> PB.10 | LCD_TFT B4 <-> PG.12 |
| LCD_TFT R5 <-> PA.12 | LCD_TFT G5 <-> PB.11 | LCD_TFT B5 <-> PA.03 |
| LCD_TFT R6 <-> PB.01 | LCD_TFT G6 <-> PC.07 | LCD_TFT B6 <-> PB.08 |
| LCD_TFT R7 <-> PG.06 | LCD_TFT G7 <-> PD.03 | LCD_TFT B7 <-> PB.09 |
-------------------------------------------------------------------------------
| LCD_TFT HSYNC <-> PC.06 | LCDTFT VSYNC <-> PA.04 |
| LCD_TFT CLK <-> PG.07 | LCD_TFT DE <-> PF.10 |
-----------------------------------------------------
*/
/* GPIOA configuration */
GPIO_InitStructure.Pin = GPIO_PIN_3 | GPIO_PIN_4 | GPIO_PIN_6 |
GPIO_PIN_11 | GPIO_PIN_12;
GPIO_InitStructure.Mode = GPIO_MODE_AF_PP;
GPIO_InitStructure.Pull = GPIO_NOPULL;
GPIO_InitStructure.Speed = GPIO_SPEED_FAST;
GPIO_InitStructure.Alternate= GPIO_AF14_LTDC;
HAL_GPIO_Init(GPIOA, &GPIO_InitStructure);
/* GPIOB configuration */
GPIO_InitStructure.Pin = GPIO_PIN_8 | \
GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_11;
HAL_GPIO_Init(GPIOB, &GPIO_InitStructure);
/* GPIOC configuration */
GPIO_InitStructure.Pin = GPIO_PIN_6 | GPIO_PIN_7 | GPIO_PIN_10;
HAL_GPIO_Init(GPIOC, &GPIO_InitStructure);
/* GPIOD configuration */
GPIO_InitStructure.Pin = GPIO_PIN_3 | GPIO_PIN_6;
HAL_GPIO_Init(GPIOD, &GPIO_InitStructure);
/* GPIOF configuration */
GPIO_InitStructure.Pin = GPIO_PIN_10;
HAL_GPIO_Init(GPIOF, &GPIO_InitStructure);
/* GPIOG configuration */
GPIO_InitStructure.Pin = GPIO_PIN_6 | GPIO_PIN_7 | \
GPIO_PIN_11;
HAL_GPIO_Init(GPIOG, &GPIO_InitStructure);
/* GPIOB configuration */
GPIO_InitStructure.Pin = GPIO_PIN_0 | GPIO_PIN_1;
GPIO_InitStructure.Alternate= GPIO_AF9_LTDC;
HAL_GPIO_Init(GPIOB, &GPIO_InitStructure);
/* GPIOG configuration */
GPIO_InitStructure.Pin = GPIO_PIN_10 | GPIO_PIN_12;
HAL_GPIO_Init(GPIOG, &GPIO_InitStructure);
}
/******************************************************************************
Static Function
*******************************************************************************/
/**
* @brief Writes Pixel.
* @param Xpos: specifies the X position.
* @param Ypos: specifies the Y position.
* @param RGB_Code: the pixel color in ARGB mode (8-8-8-8).
* @retval None
*/
void BSP_LCD_DrawPixel(uint16_t Xpos, uint16_t Ypos, uint32_t RGB_Code)
{
/* Write data value to all SDRAM memory */
*(__IO uint32_t*) (LtdcHandler.LayerCfg[ActiveLayer].FBStartAdress + (4*(Ypos*BSP_LCD_GetXSize() + Xpos))) = RGB_Code;
}
/**
* @brief Draws a character on LCD.
* @param Xpos: the Line where to display the character shape.
* @param Ypos: start column address.
* @param c: pointer to the character data.
* @retval None
*/
static void DrawChar(uint16_t Xpos, uint16_t Ypos, const uint8_t *c)
{
uint32_t i = 0, j = 0;
uint16_t height, width;
uint8_t offset;
uint8_t *pchar;
uint32_t line=0;
height = DrawProp[ActiveLayer].pFont->Height;
width = DrawProp[ActiveLayer].pFont->Width;
offset = 8 *((width + 7)/8) - width ;
for(i = 0; i < height; i++)
{
pchar = ((uint8_t *)c + (width + 7)/8 * i);
switch(((width + 7)/8))
{
case 1:
line = pchar[0];
break;
case 2:
line = (pchar[0]<< 8) | pchar[1];
break;
case 3:
default:
line = (pchar[0]<< 16) | (pchar[1]<< 8) | pchar[2];
break;
}
for (j = 0; j < width; j++)
{
if(line & (1 << (width- j + offset- 1)))
{
BSP_LCD_DrawPixel((Xpos + j), Ypos, DrawProp[ActiveLayer].TextColor);
}
else
{
BSP_LCD_DrawPixel((Xpos + j), Ypos, DrawProp[ActiveLayer].BackColor);
}
}
Ypos++;
}
}
/**
* @brief Fill buffer.
* @param LayerIndex: layer index.
* @param pDst: output color.
* @param xSize: buffer width.
* @param ySize: buffer height.
* @param OffLine: offset.
* @param ColorIndex: Color Index.
* @retval None
*/
static void FillBuffer(uint32_t LayerIndex, void * pDst, uint32_t xSize, uint32_t ySize, uint32_t OffLine, uint32_t ColorIndex)
{
/* Register to memory mode with ARGB8888 as color Mode */
Dma2dHandler.Init.Mode = DMA2D_R2M;
Dma2dHandler.Init.ColorMode = DMA2D_ARGB8888;
Dma2dHandler.Init.OutputOffset = OffLine;
Dma2dHandler.Instance = DMA2D;
/* DMA2D Initialisation */
if(HAL_DMA2D_Init(&Dma2dHandler) == HAL_OK)
{
if(HAL_DMA2D_ConfigLayer(&Dma2dHandler, LayerIndex) == HAL_OK)
{
if (HAL_DMA2D_Start(&Dma2dHandler, ColorIndex, (uint32_t)pDst, xSize, ySize) == HAL_OK)
{
/* Polling For DMA transfer */
HAL_DMA2D_PollForTransfer(&Dma2dHandler, 10);
}
}
}
}
/**
* @brief Convert Line to ARGB8888 pixel format.
* @param pSrc: pointer to source buffer.
* @param pDst: output color.
* @param xSize: buffer width.
* @param ColorMode: Input color mode
* @retval None
*/
static void ConvertLineToARGB8888(void * pSrc, void * pDst, uint32_t xSize, uint32_t ColorMode)
{
/* Configure the DMA2D Mode, Color Mode and output offset */
Dma2dHandler.Init.Mode = DMA2D_M2M_PFC;
Dma2dHandler.Init.ColorMode = DMA2D_ARGB8888;
Dma2dHandler.Init.OutputOffset = 0;
/* Foreground Configuration */
Dma2dHandler.LayerCfg[1].AlphaMode = DMA2D_NO_MODIF_ALPHA;
Dma2dHandler.LayerCfg[1].InputAlpha = 0xFF;
Dma2dHandler.LayerCfg[1].InputColorMode = ColorMode;
Dma2dHandler.LayerCfg[1].InputOffset = 0;
Dma2dHandler.Instance = DMA2D;
/* DMA2D Initialisation */
if(HAL_DMA2D_Init(&Dma2dHandler) == HAL_OK)
{
if(HAL_DMA2D_ConfigLayer(&Dma2dHandler, 1) == HAL_OK)
{
if (HAL_DMA2D_Start(&Dma2dHandler, (uint32_t)pSrc, (uint32_t)pDst, xSize, 1) == HAL_OK)
{
/* Polling For DMA transfer */
HAL_DMA2D_PollForTransfer(&Dma2dHandler, 10);
}
}
}
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/