shithub: openh264

ref: 9e4ab64c738171f4329a4c1a8c12890d783c5bf5
dir: /codec/common/WelsThreadLib.cpp/

View raw version
/*!
 * \copy
 *     Copyright (c)  2009-2013, Cisco Systems
 *     All rights reserved.
 *
 *     Redistribution and use in source and binary forms, with or without
 *     modification, are permitted provided that the following conditions
 *     are met:
 *
 *        * Redistributions of source code must retain the above copyright
 *          notice, this list of conditions and the following disclaimer.
 *
 *        * Redistributions in binary form must reproduce the above copyright
 *          notice, this list of conditions and the following disclaimer in
 *          the documentation and/or other materials provided with the
 *          distribution.
 *
 *     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 *     "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 *     LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 *     FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 *     COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 *     INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 *     BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 *     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 *     CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 *     LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 *     ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 *     POSSIBILITY OF SUCH DAMAGE.
 *
 *
 * \file	WelsThreadLib.c
 *
 * \brief	Interfaces introduced in thread programming
 *
 * \date	11/17/2009 Created
 *
 *************************************************************************************
 */


#ifdef LINUX
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <sched.h>
#elif !defined(_WIN32)
#include <sys/types.h>
#include <sys/sysctl.h>
#include <sys/param.h>
#include <unistd.h>
#ifdef __APPLE__
#define HW_NCPU_NAME "hw.logicalcpu"
#else
#define HW_NCPU_NAME "hw.ncpu"
#endif
#endif

#include "WelsThreadLib.h"
#include <stdio.h>

#ifdef MT_ENABLED

#ifdef  _WIN32

void WelsSleep (uint32_t dwMilliseconds) {
  Sleep (dwMilliseconds);
}

WELS_THREAD_ERROR_CODE    WelsMutexInit (WELS_MUTEX*    mutex) {
  InitializeCriticalSection (mutex);

  return WELS_THREAD_ERROR_OK;
}

WELS_THREAD_ERROR_CODE    WelsMutexLock (WELS_MUTEX*    mutex) {
  EnterCriticalSection (mutex);

  return WELS_THREAD_ERROR_OK;
}

WELS_THREAD_ERROR_CODE    WelsMutexUnlock (WELS_MUTEX* mutex) {
  LeaveCriticalSection (mutex);

  return WELS_THREAD_ERROR_OK;
}

WELS_THREAD_ERROR_CODE    WelsMutexDestroy (WELS_MUTEX* mutex) {
  DeleteCriticalSection (mutex);

  return WELS_THREAD_ERROR_OK;
}

WELS_THREAD_ERROR_CODE    WelsEventInit (WELS_EVENT*    event) {
  WELS_EVENT   h = CreateEvent (NULL, FALSE, FALSE, NULL);

  if (h == NULL) {
    return WELS_THREAD_ERROR_GENERAL;
  }
  *event = h;
  return WELS_THREAD_ERROR_OK;
}

WELS_THREAD_ERROR_CODE    WelsEventSignal (WELS_EVENT* event) {
  if (SetEvent (*event)) {
    return WELS_THREAD_ERROR_OK;
  }
  return WELS_THREAD_ERROR_GENERAL;
}

WELS_THREAD_ERROR_CODE    WelsEventWait (WELS_EVENT* event) {
  return WaitForSingleObject (*event, INFINITE);
}

WELS_THREAD_ERROR_CODE    WelsEventWaitWithTimeOut (WELS_EVENT* event, uint32_t dwMilliseconds) {
  return WaitForSingleObject (*event, dwMilliseconds);
}

WELS_THREAD_ERROR_CODE    WelsMultipleEventsWaitSingleBlocking (uint32_t nCount,
    WELS_EVENT* event_list,
    uint32_t dwMilliseconds) {
  return WaitForMultipleObjects (nCount, event_list, FALSE, dwMilliseconds);
}

WELS_THREAD_ERROR_CODE    WelsMultipleEventsWaitAllBlocking (uint32_t nCount, WELS_EVENT* event_list) {
  return WaitForMultipleObjects (nCount, event_list, TRUE, INFINITE);
}

WELS_THREAD_ERROR_CODE    WelsEventDestroy (WELS_EVENT* event) {
  CloseHandle (*event);

  *event = NULL;
  return WELS_THREAD_ERROR_OK;
}


WELS_THREAD_ERROR_CODE    WelsThreadCreate (WELS_THREAD_HANDLE* thread,  LPWELS_THREAD_ROUTINE  routine,
    void* arg, WELS_THREAD_ATTR attr) {
  WELS_THREAD_HANDLE   h = CreateThread (NULL, 0, routine, arg, 0, NULL);

  if (h == NULL) {
    return WELS_THREAD_ERROR_GENERAL;
  }
  * thread = h;

  return WELS_THREAD_ERROR_OK;
}

WELS_THREAD_ERROR_CODE	  WelsSetThreadCancelable() {
  // nil implementation for WIN32
  return WELS_THREAD_ERROR_OK;
}

WELS_THREAD_ERROR_CODE    WelsThreadJoin (WELS_THREAD_HANDLE  thread) {
  WaitForSingleObject (thread, INFINITE);

  return WELS_THREAD_ERROR_OK;
}

WELS_THREAD_ERROR_CODE    WelsThreadCancel (WELS_THREAD_HANDLE  thread) {
  return WELS_THREAD_ERROR_OK;
}


WELS_THREAD_ERROR_CODE    WelsThreadDestroy (WELS_THREAD_HANDLE* thread) {
  if (thread != NULL) {
    CloseHandle (*thread);
    *thread = NULL;
  }
  return WELS_THREAD_ERROR_OK;
}

WELS_THREAD_HANDLE        WelsThreadSelf() {
  return GetCurrentThread();
}

WELS_THREAD_ERROR_CODE    WelsQueryLogicalProcessInfo (WelsLogicalProcessInfo* pInfo) {
  SYSTEM_INFO  si;

  GetSystemInfo (&si);

  pInfo->ProcessorCount = si.dwNumberOfProcessors;

  return WELS_THREAD_ERROR_OK;
}

#else

void WelsSleep (uint32_t dwMilliseconds) {
  usleep (dwMilliseconds * 1000);	// microseconds
}

WELS_THREAD_ERROR_CODE    WelsThreadCreate (WELS_THREAD_HANDLE* thread,  LPWELS_THREAD_ROUTINE  routine,
    void* arg, WELS_THREAD_ATTR attr) {
  WELS_THREAD_ERROR_CODE err = 0;

  pthread_attr_t at;
  err = pthread_attr_init (&at);
  if (err)
    return err;
  err = pthread_attr_setscope (&at, PTHREAD_SCOPE_SYSTEM);
  if (err)
    return err;
  err = pthread_attr_setschedpolicy (&at, SCHED_FIFO);
  if (err)
    return err;
  err = pthread_create (thread, &at, routine, arg);

  pthread_attr_destroy (&at);

  return err;

//	return pthread_create(thread, NULL, routine, arg);
}

WELS_THREAD_ERROR_CODE	  WelsSetThreadCancelable() {
  WELS_THREAD_ERROR_CODE err = pthread_setcancelstate (PTHREAD_CANCEL_ENABLE, NULL);
  if (0 == err)
    err = pthread_setcanceltype (PTHREAD_CANCEL_DEFERRED, NULL);
  return err;
}

WELS_THREAD_ERROR_CODE    WelsThreadJoin (WELS_THREAD_HANDLE  thread) {
  return pthread_join (thread, NULL);
}

WELS_THREAD_ERROR_CODE    WelsThreadCancel (WELS_THREAD_HANDLE  thread) {
  return pthread_cancel (thread);
}

WELS_THREAD_ERROR_CODE    WelsThreadDestroy (WELS_THREAD_HANDLE* thread) {
  return WELS_THREAD_ERROR_OK;
}

WELS_THREAD_HANDLE        WelsThreadSelf() {
  return pthread_self();
}

WELS_THREAD_ERROR_CODE    WelsMutexInit (WELS_MUTEX*    mutex) {
  return pthread_mutex_init (mutex, NULL);
}

WELS_THREAD_ERROR_CODE    WelsMutexLock (WELS_MUTEX*    mutex) {
  return pthread_mutex_lock (mutex);
}

WELS_THREAD_ERROR_CODE    WelsMutexUnlock (WELS_MUTEX* mutex) {
  return pthread_mutex_unlock (mutex);
}

WELS_THREAD_ERROR_CODE    WelsMutexDestroy (WELS_MUTEX* mutex) {
  return pthread_mutex_destroy (mutex);
}

// unnamed semaphores aren't supported on OS X

WELS_THREAD_ERROR_CODE    WelsEventInit (WELS_EVENT* event) {
  return sem_init (event, 0, 0);
}

WELS_THREAD_ERROR_CODE   WelsEventDestroy (WELS_EVENT* event) {
  return sem_destroy (event);	// match with sem_init
}

WELS_THREAD_ERROR_CODE    WelsEventOpen (WELS_EVENT** p_event, const char* event_name) {
  if (p_event == NULL || event_name == NULL)
    return WELS_THREAD_ERROR_GENERAL;
  *p_event = sem_open (event_name, O_CREAT, (S_IRUSR | S_IWUSR)/*0600*/, 0);
  if (*p_event == (sem_t*)SEM_FAILED) {
    sem_unlink (event_name);
    *p_event = NULL;
    return WELS_THREAD_ERROR_GENERAL;
  } else {
    return WELS_THREAD_ERROR_OK;
  }
}
WELS_THREAD_ERROR_CODE    WelsEventClose (WELS_EVENT* event, const char* event_name) {
  WELS_THREAD_ERROR_CODE err = sem_close (event);	// match with sem_open
  if (event_name)
    sem_unlink (event_name);
  return err;
}

WELS_THREAD_ERROR_CODE   WelsEventSignal (WELS_EVENT* event) {
  WELS_THREAD_ERROR_CODE err = 0;
//	int32_t val = 0;
//	sem_getvalue(event, &val);
//	fprintf( stderr, "before signal it, val= %d..\n",val );
  err = sem_post (event);
//	sem_getvalue(event, &val);
//	fprintf( stderr, "after signal it, val= %d..\n",val );
  return err;
}

WELS_THREAD_ERROR_CODE   WelsEventWait (WELS_EVENT* event) {
  return sem_wait (event);	// blocking until signaled
}

WELS_THREAD_ERROR_CODE    WelsEventWaitWithTimeOut (WELS_EVENT* event, uint32_t dwMilliseconds) {
  if (dwMilliseconds != (uint32_t) - 1) {
    return sem_wait (event);
  } else {
#if defined(__APPLE__)
    int32_t err = 0;
    int32_t wait_count = 0;
    do {
      err = sem_trywait (event);
      if (WELS_THREAD_ERROR_OK == err)
        break;// WELS_THREAD_ERROR_OK;
      else if (wait_count > 0)
        break;
      usleep (dwMilliseconds * 1000);
      ++ wait_count;
    } while (1);
    return err;
#else
    struct timespec ts;
    struct timeval tv;

    gettimeofday (&tv, 0);

    ts.tv_nsec = tv.tv_usec * 1000 + dwMilliseconds * 1000000;
    ts.tv_sec = tv.tv_sec + ts.tv_nsec / 1000000000;
    ts.tv_nsec %= 1000000000;

    return sem_timedwait (event, &ts);
#endif//__APPLE__
  }
}

WELS_THREAD_ERROR_CODE    WelsMultipleEventsWaitSingleBlocking (uint32_t nCount,
    WELS_EVENT** event_list,
    uint32_t dwMilliseconds) {
  // bWaitAll = FALSE && blocking
  uint32_t nIdx = 0;
  const uint32_t kuiAccessTime = 2;	// 2 us once
//	uint32_t uiSleepMs = 0;

  if (nCount == 0)
    return WELS_THREAD_ERROR_WAIT_FAILED;

  while (1) {
    nIdx = 0;	// access each event by order
    while (nIdx < nCount) {
      int32_t err = 0;
//#if defined(__APPLE__)	// clock_gettime(CLOCK_REALTIME) & sem_timedwait not supported on mac, so have below impl
      int32_t wait_count = 0;
//			struct timespec ts;
//			struct timeval tv;
//
//			gettimeofday(&tv,0);
//			ts.tv_sec = tv.tv_sec/*+ kuiAccessTime / 1000*/;		// second
//			ts.tv_nsec = (tv.tv_usec + kuiAccessTime) * 1000;	// nano-second

      /*
       * although such interface is not used in __GNUC__ like platform, to use
       * pthread_cond_timedwait() might be better choice if need
       */
      do {
        err = sem_trywait (event_list[nIdx]);
        if (WELS_THREAD_ERROR_OK == err)
          return WELS_THREAD_ERROR_WAIT_OBJECT_0 + nIdx;
        else if (wait_count > 0)
          break;
        usleep (kuiAccessTime);
        ++ wait_count;
      } while (1);
//#else
//			struct timespec ts;
//
//			if ( clock_gettime(CLOCK_REALTIME, &ts) == -1 )
//				return WELS_THREAD_ERROR_WAIT_FAILED;
//			ts.tv_nsec += kuiAccessTime/*(kuiAccessTime % 1000)*/ * 1000;
//
////			fprintf( stderr, "sem_timedwait(): start to wait event %d..\n", nIdx );
//			err = sem_timedwait(event_list[nIdx], &ts);
////			if ( err == -1 )
////			{
////				sem_getvalue(&event_list[nIdx], &val);
////				fprintf( stderr, "sem_timedwait() errno(%d) semaphore %d..\n", errno, val);
////				return WELS_THREAD_ERROR_WAIT_FAILED;
////			}
////			fprintf( stderr, "sem_timedwait(): wait event %d result %d errno %d..\n", nIdx, err, errno );
//			if ( WELS_THREAD_ERROR_OK == err ) // non-blocking mode
//			{
////				int32_t val = 0;
////				sem_getvalue(&event_list[nIdx], &val);
////				fprintf( stderr, "after sem_timedwait(), event_list[%d] semaphore value= %d..\n", nIdx, val);
////				fprintf( stderr, "WelsMultipleEventsWaitSingleBlocking sleep %d us\n", uiSleepMs);
//				return WELS_THREAD_ERROR_WAIT_OBJECT_0 + nIdx;
//			}
//#endif
      // we do need access next event next time
      ++ nIdx;
//			uiSleepMs += kuiAccessTime;
    }
    usleep (1);	// switch to working threads
//		++ uiSleepMs;
  }

  return WELS_THREAD_ERROR_WAIT_FAILED;
}

WELS_THREAD_ERROR_CODE    WelsMultipleEventsWaitAllBlocking (uint32_t nCount, WELS_EVENT** event_list) {
  // bWaitAll = TRUE && blocking
  uint32_t nIdx = 0;
//	const uint32_t kuiAccessTime = (uint32_t)-1;// 1 ms once
  uint32_t uiCountSignals = 0;
  uint32_t uiSignalFlag	= 0;	// UGLY: suppose maximal event number up to 32

  if (nCount == 0 || nCount > (sizeof (uint32_t) << 3))
    return WELS_THREAD_ERROR_WAIT_FAILED;

  while (1) {
    nIdx = 0;	// access each event by order
    while (nIdx < nCount) {
      const uint32_t kuiBitwiseFlag = (1 << nIdx);

      if ((uiSignalFlag & kuiBitwiseFlag) != kuiBitwiseFlag) { // non-blocking mode
        int32_t err = 0;
//				fprintf( stderr, "sem_wait(): start to wait event %d..\n", nIdx );
        err = sem_wait (event_list[nIdx]);
//				fprintf( stderr, "sem_wait(): wait event %d result %d errno %d..\n", nIdx, err, errno );
        if (WELS_THREAD_ERROR_OK == err) {
//					int32_t val = 0;
//					sem_getvalue(&event_list[nIdx], &val);
//					fprintf( stderr, "after sem_timedwait(), event_list[%d] semaphore value= %d..\n", nIdx, val);

          uiSignalFlag |= kuiBitwiseFlag;
          ++ uiCountSignals;
          if (uiCountSignals >= nCount) {
            return WELS_THREAD_ERROR_OK;
          }
        }
      }
      // we do need access next event next time
      ++ nIdx;
    }
  }

  return WELS_THREAD_ERROR_WAIT_FAILED;
}

WELS_THREAD_ERROR_CODE    WelsQueryLogicalProcessInfo (WelsLogicalProcessInfo* pInfo) {
#ifdef LINUX

  cpu_set_t cpuset;

  CPU_ZERO (&cpuset);

  if (!sched_getaffinity (0, sizeof (cpuset), &cpuset))
    pInfo->ProcessorCount = CPU_COUNT (&cpuset);
  else
    pInfo->ProcessorCount = 1;

  return WELS_THREAD_ERROR_OK;

#else

  size_t len = sizeof (pInfo->ProcessorCount);

  if (sysctlbyname (HW_NCPU_NAME, &pInfo->ProcessorCount, &len, NULL, 0) == -1)
    pInfo->ProcessorCount = 1;

  return WELS_THREAD_ERROR_OK;

#endif//LINUX
}

#endif


#endif // MT_ENABLED