ref: 3c2814b50e808849a6835a9b50265525e2d9a7d4
dir: /tool/
#!/usr/bin/env bash
set -eu -o pipefail
print_usage() {
cat <<EOF
Usage: tool <command> [options] [arguments]
Example:
tool build --portmidi orca
Commands:
build <target>
Compiles the livecoding environment or the CLI tool.
Targets: orca, cli
Output: build/<target>
clean
Removes build/
info
Prints information about the detected build environment.
help
Prints this message and exits.
Options:
-c <name> Use a specific compiler binary. Default: \$CC, or cc
-d Build with debug features. Output changed to:
build/debug/<target>
--harden Enable compiler safeguards like -fstack-protector.
You should probably do this if you plan to give the
compiled binary to other people.
--static Build static binary.
--pie Enable PIE (ASLR).
Note: --pie and --static cannot be mixed.
-s Print statistics about compile time and binary size.
-v Print important commands as they're executed.
-h or --help Print this message and exit.
Optional Features:
--portmidi Enable or disable hardware MIDI output support with
--no-portmidi PortMidi. Note: PortMidi has memory leaks and bugs.
Default: disabled.
--mouse Enable or disable mouse features in the livecoding
--no-mouse environment.
Default: enabled.
EOF
}
if [[ -z "${1:-}" ]]; then
echo "Error: Command required" >&2
print_usage >&2
exit 1
fi
cmd=$1
shift
os=
case $(uname -s | awk '{print tolower($0)}') in
linux*) os=linux;;
darwin*) os=mac;;
cygwin*) os=cygwin;;
*bsd*) os=bsd;;
*) os=unknown;;
esac
cc_exe="${CC:-cc}"
if [[ $os = cygwin ]]; then
# Under cygwin, specifically ignore the mingw compilers if they're set as the
# CC environment variable. This may be the default from the cygwin installer.
# But we want to use 'gcc' from the cygwin gcc-core package (probably aliased
# to cc), *not* the mingw compiler, because otherwise lots of POSIX stuff
# will break. (Note that the 'cli' target might be fine, because it doesn't
# uses curses or networking, but the 'orca' target almost certainly won't
# be.)
#
# I'm worried about ambiguity with 'cc' being still aliased to mingw if the
# user doesn't have gcc-core installed. I have no idea if that actually
# happens. So we'll just explicitly set it to gcc. This might mess up people
# who have clang installed but not gcc, I guess? Is that even possible?
case $cc_exe in
i686-w64-mingw32-gcc.exe|\
x86_64-w64-mingw32-gcc.exe)
cc_exe=gcc;;
esac
fi
verbose=0
protections_enabled=0
stats_enabled=0
pie_enabled=0
static_enabled=0
portmidi_enabled=0
mouse_disabled=0
config_mode=release
while getopts c:dhsv-: opt_val; do
case "$opt_val" in
-)
case "$OPTARG" in
harden) protections_enabled=1;;
help) print_usage; exit 0;;
static) static_enabled=1;;
pie) pie_enabled=1;;
portmidi) portmidi_enabled=1;;
no-portmidi|noportmidi) portmidi_enabled=0;;
mouse) mouse_disabled=0;;
no-mouse|nomouse) mouse_disabled=1;;
*)
echo "Unknown long option --$OPTARG" >&2
print_usage >&2
exit 1
;;
esac
;;
c) cc_exe="$OPTARG";;
d) config_mode=debug;;
h) print_usage; exit 0;;
s) stats_enabled=1;;
v) verbose=1;;
\?) print_usage >&2; exit 1;;
*) break;;
esac
done
arch=
case $(uname -m) in
x86_64) arch=x86_64;;
*) arch=unknown;;
esac
warn() {
echo "Warning: $*" >&2
}
fatal() {
echo "Error: $*" >&2
exit 1
}
script_error() {
echo "Script error: $*" >&2
exit 1
}
verbose_echo() {
if [[ $verbose = 1 ]]; then
echo "$@"
fi
"$@"
}
TIMEFORMAT='%3R'
last_time=
file_size() {
wc -c < "$1" | sed -e 's/^[[:space:]]*//' -e 's/[[:space:]]*$//'
}
timed_stats() {
if [[ $stats_enabled = 1 ]]; then
{ last_time=$( { time "$@" 1>&3- 2>&4-; } 2>&1 ); } 3>&1 4>&2
else
"$@"
fi
}
version_string_normalized() {
echo "$@" | awk -F. '{ printf("%d%03d%03d%03d\n", $1,$2,$3,$4); }';
}
if [[ ($os == bsd) || ($os == unknown) ]]; then
warn "Build script not tested on this platform"
fi
# This is not perfect by any means
cc_id=
cc_vers=
lld_detected=0
if cc_vers=$(echo -e '#ifndef __clang__\n#error Not found\n#endif\n__clang_major__.__clang_minor__.__clang_patchlevel__' | "$cc_exe" -E -xc - 2>/dev/null | tail -n 1 | tr -d '\040'); then
cc_id=clang
# Mac clang/llvm doesn't say the real version of clang. Just assume it's 3.9.0
if [[ $os == mac ]]; then
cc_vers=3.9.0
else
if command -v "lld" >/dev/null 2>&1; then
lld_detected=1
fi
fi
elif cc_vers=$(echo -e '#ifndef __GNUC__\n#error Not found\n#endif\n__GNUC__.__GNUC_MINOR__.__GNUC_PATCHLEVEL__' | "$cc_exe" -E -xc - 2>/dev/null | tail -n 1 | tr -d '\040'); then
cc_id=gcc
elif cc_vers=$(echo -e '#ifndef __TINYC__\n#error Not found\n#endif\n__TINYC__' | "$cc_exe" -E -xc - 2>/dev/null | tail -n 1 | tr -d '\040'); then
cc_id=tcc
fi
if [[ -z $cc_id ]]; then
warn "Failed to detect compiler type"
fi
if [[ -z $cc_vers ]]; then
warn "Failed to detect compiler version"
fi
cc_vers_is_gte() {
if [[ $(version_string_normalized "$cc_vers") -ge $(version_string_normalized "$1") ]]; then
return 0
else
return 1
fi
}
cc_id_and_vers_gte() {
if [[ $cc_id == "$1" ]] && cc_vers_is_gte "$2"; then
return 0
else
return 1
fi
}
add() {
if [[ -z "${1:-}" ]]; then
script_error "At least one argument required for array add"
fi
local array_name
array_name=${1}
shift
eval "$array_name+=($(printf "'%s' " "$@"))"
}
concat() {
if [[ -z "${1:-}" || -z "${2:-}" ]]; then
script_error "Two arguments required for array concat"
fi
local lhs_name
local rhs_name
lhs_name=${1}
rhs_name=${2}
eval "$lhs_name+=(\"\${${rhs_name}[@]}\")"
}
try_make_dir() {
if ! [[ -e "$1" ]]; then
verbose_echo mkdir "$1"
elif ! [[ -d "$1" ]]; then
fatal "File $1 already exists but is not a directory"
fi
}
build_dir=build
build_target() {
local cc_flags=()
local libraries=()
local source_files=()
local out_exe
add cc_flags -std=c99 -pipe -finput-charset=UTF-8 -Wall -Wpedantic -Wextra \
-Wwrite-strings
if cc_id_and_vers_gte gcc 6.0.0 || cc_id_and_vers_gte clang 3.9.0; then
add cc_flags -Wconversion -Wshadow -Wstrict-prototypes \
-Werror=implicit-function-declaration -Werror=implicit-int \
-Werror=incompatible-pointer-types -Werror=int-conversion
fi
if [[ $cc_id = tcc ]]; then
add cc_flags -Wunsupported
fi
if [[ $os = mac && $cc_id = clang ]]; then
# The clang that's shipped with Mac 10.12 has bad behavior for issuing
# warnings for structs initialed with {0} in C99. We have to disable this
# warning, or it will issue a bunch of useless warnings. It might be fixed
# in later versions, but Apple makes the version of clang/LLVM
# indecipherable, so we'll just always turn it off.
add cc_flags -Wno-missing-field-initializers
fi
if [[ $lld_detected = 1 ]]; then
add cc_flags -fuse-ld=lld
fi
if [[ $protections_enabled = 1 ]]; then
add cc_flags -D_FORTIFY_SOURCE=2 -fstack-protector-strong
fi
if [[ $pie_enabled = 1 ]]; then
add cc_flags -pie -fpie -Wl,-pie
# Only explicitly specify no-pie if cc version is new enough
elif cc_id_and_vers_gte gcc 6.0.0 || cc_id_and_vers_gte clang 6.0.0; then
add cc_flags -no-pie -fno-pie
fi
if [[ $static_enabled = 1 ]]; then
add cc_flags -static
fi
case $config_mode in
debug)
add cc_flags -DDEBUG -ggdb
# cygwin gcc doesn't seem to have this stuff, just elide for now
if [[ $os != cygwin ]]; then
if cc_id_and_vers_gte gcc 6.0.0 || cc_id_and_vers_gte clang 3.9.0; then
add cc_flags -fsanitize=address -fsanitize=undefined \
-fsanitize=float-divide-by-zero
fi
if cc_id_and_vers_gte clang 7.0.0; then
add cc_flags -fsanitize=implicit-conversion \
-fsanitize=unsigned-integer-overflow
fi
fi
if [[ $os = mac ]]; then
# Our mac clang does not have -Og
add cc_flags -O1
else
add cc_flags -Og
# needed if address is already specified? doesn't work on mac clang, at
# least
# add cc_flags -fsanitize=leak
fi
case $cc_id in
tcc) add cc_flags -g -bt 10;;
esac
;;
release)
add cc_flags -DNDEBUG -O2 -g0
if [[ $protections_enabled != 1 ]]; then
add cc_flags -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0
case $cc_id in
gcc|clang) add cc_flags -fno-stack-protector;;
esac
fi
if [[ $os = mac ]]; then
# todo some stripping option
true
else
# -flto is good on both clang and gcc on Linux
case $cc_id in
gcc|clang) add cc_flags -flto;;
esac
add cc_flags -s
fi
;;
*) fatal "Unknown build config \"$config_mode\"";;
esac
case $arch in
x86_64)
# 'nehalem' tuning actually produces faster code for orca than later
# archs, for both gcc and clang, even if it's running on a later arch
# CPU. This is likely due to smaller emitted code size. gcc earlier than
# 4.9 does not recognize the arch flag for it it, though, and I haven't
# tested a compiler that old, so I don't know what optimization behavior
# we get with it is. Just leave it at default, in that case.
case $cc_id in
gcc)
if cc_vers_is_gte 4.9; then
add cc_flags -march=nehalem
fi
;;
clang)
add cc_flags -march=nehalem
;;
esac
;;
esac
add source_files gbuffer.c field.c vmio.c sim.c
case $1 in
cli)
add source_files cli_main.c
out_exe=cli
;;
orca|tui)
add source_files osc_out.c term_util.c sysmisc.c thirdparty/oso.c tui_main.c
add cc_flags -D_XOPEN_SOURCE_EXTENDED=1
# thirdparty headers (like sokol_time.h) should get -isystem for their
# include dir so that any warnings they generate with our warning flags
# are ignored. (sokol_time.h may generate sign conversion warning on
# mac.)
add cc_flags -isystem thirdparty
out_exe=orca
case $os in
mac)
local brew_prefix=
if ! brew_prefix=$(printenv HOMEBREW_PREFIX); then
brew_prefix=/usr/local/
fi
local ncurses_dir="$brew_prefix/opt/ncurses"
if ! [[ -d "$ncurses_dir" ]]; then
echo "Error: ncurses directory not found at $ncurses_dir" >&2
echo "Install with: brew install ncurses" >&2
exit 1
fi
# prefer homebrew version of ncurses if installed. Will give us
# better terminfo, so we can use A_DIM in Terminal.app, etc.
add libraries "-L$ncurses_dir/lib"
add cc_flags "-I$ncurses_dir/include"
# todo mach time stuff for mac?
if [[ $portmidi_enabled = 1 ]]; then
local portmidi_dir="$brew_prefix/opt/portmidi"
if ! [[ -d "$portmidi_dir" ]]; then
echo "Error: PortMidi directory not found at $portmidi_dir" >&2
echo "Install with: brew install portmidi" >&2
exit 1
fi
add libraries "-L$portmidi_dir/lib"
add cc_flags "-I$portmidi_dir/include"
fi
# needed for using pbpaste instead of xclip
add cc_flags -DORCA_OS_MAC
;;
*)
# librt and high-res posix timers on Linux
add libraries -lrt
add cc_flags -D_POSIX_C_SOURCE=200809L
;;
esac
add libraries -lmenuw -lformw -lncursesw
if [[ $portmidi_enabled = 1 ]]; then
add libraries -lportmidi
add cc_flags -DFEAT_PORTMIDI
if [[ $config_mode = debug ]]; then
echo -e "Warning: The PortMidi library contains code that may trigger address sanitizer in debug builds.\\nThese are not bugs in orca." >&2
fi
fi
if [[ $mouse_disabled = 1 ]]; then
add cc_flags -DFEAT_NOMOUSE
fi
;;
*)
echo -e "Unknown build target '$1'\\nValid targets: orca, cli" >&2
exit 1
;;
esac
try_make_dir "$build_dir"
if [[ $config_mode = debug ]]; then
build_dir=$build_dir/debug
try_make_dir "$build_dir"
fi
local out_path=$build_dir/$out_exe
# bash versions quirk: empty arrays might give error on expansion, use +
# trick to avoid expanding second operand
verbose_echo timed_stats "$cc_exe" "${cc_flags[@]}" -o "$out_path" "${source_files[@]}" ${libraries[@]+"${libraries[@]}"}
if [[ $stats_enabled = 1 ]]; then
echo "time: $last_time"
echo "size: $(file_size "$out_path")"
fi
}
print_info() {
local linker_name
if [[ $lld_detected = 1 ]]; then
linker_name=LLD
else
linker_name=default
fi
cat <<EOF
Operating system: $os
Architecture: $arch
Compiler name: $cc_exe
Compiler type: $cc_id
Compiler version: $cc_vers
Linker: $linker_name
EOF
}
shift $((OPTIND - 1))
case $cmd in
info)
if [[ "$#" -gt 1 ]]; then
fatal "Too many arguments for 'info'"
fi
print_info; exit 0;;
build)
if [[ "$#" -lt 1 ]]; then
fatal "Too few arguments for 'build'"
fi
if [[ "$#" -gt 1 ]]; then
echo "Too many arguments for 'build'" >&2
echo "The syntax has changed. Updated usage examples:" >&2
echo "./tool build --portmidi orca (release)" >&2
echo "./tool build -d orca (debug)" >&2
exit 1
fi
build_target "$1"
;;
clean)
if [[ -d "$build_dir" ]]; then
verbose_echo rm -rf "$build_dir"
fi
;;
help) print_usage; exit 0;;
-*)
echo "The syntax has changed for the 'tool' build script." >&2
echo "The options now need to come after the command name." >&2
echo "Do it like this instead:" >&2
echo "./tool build --portmidi orca" >&2
exit 1
;;
*) fatal "Unrecognized command $cmd";;
esac