shithub: sox

ref: 34d83c1c8e6dfa635a57c3cd07b54c222b6f39f7
dir: /src/dcshift.c/

/*
 * dcshift.c
 * (c) 2000.04.15 Chris Ausbrooks <weed@bucket.pp.ualr.edu>
 *
 * based on vol.c which is
 * (c) 20/03/2000 Fabien COELHO <fabien@coelho.net> for sox.
 *
 * DC shift a sound file, with basic linear amplitude formula.
 * Beware of saturations! clipping is checked and reported.
 * Cannot handle different number of channels.
 * Cannot handle rate change.
 */

#include "st.h"

#include <math.h>   /* exp(), sqrt() */
#include <limits.h> /* LONG_MAX */

/* type used for computations.
 */
#ifndef DCSHIFT_FLOAT
#define DCSHIFT_FLOAT float
#define DCSHIFT_FLOAT_SCAN "%f"
#endif

/* constants
 */
#define ZERO      ((DCSHIFT_FLOAT)(0.0e0))
#define LOG_10_20 ((DCSHIFT_FLOAT)(0.1151292546497022842009e0))
#define ONE       ((DCSHIFT_FLOAT)(1.0e0))
#define TWENTY    ((DCSHIFT_FLOAT)(20.0e0))

char *dcshift_usage = "Usage: dcshift shift [ limitergain ]\n"
"The peak limiter has a gain much less than 1.0 (ie 0.05 or 0.02) which is only\n"
"used on peaks to prevent clipping. (default is no limiter)";

#define DCSHIFT_USAGE dcshift_usage

typedef struct {
    DCSHIFT_FLOAT dcshift; /* DC shift. */
    int uselimiter; /* boolean: are we using the limiter? */
    DCSHIFT_FLOAT limiterthreshhold;
    DCSHIFT_FLOAT limitergain; /* limiter gain. */
    int limited; /* number of limited values to report. */
    int totalprocessed;
    int clipped;    /* number of clipped values to report. */
} * dcs_t;

/*
 * Process options: dcshift (float) type (amplitude, power, dB)
 */
int st_dcshift_getopts(effp, n, argv)
eff_t effp;
int n;
char **argv;
{
    dcs_t dcs = (dcs_t) effp->priv;
    dcs->dcshift = ONE; /* default is no change */
    dcs->uselimiter = 0; /* default is no limiter */

    if (n < 1)
    {
        st_fail(DCSHIFT_USAGE);
        return ST_EOF;
    }

    if (n && (!sscanf(argv[0], DCSHIFT_FLOAT_SCAN, &dcs->dcshift)))
    {
        st_fail(DCSHIFT_USAGE);
        return ST_EOF;
    }

    if (n>1)
    {
        if (!sscanf(argv[1], DCSHIFT_FLOAT_SCAN, &dcs->limitergain))
        {
                st_fail(DCSHIFT_USAGE);
                return ST_EOF;
        }

        dcs->uselimiter = 1; /* ok, we'll use it */
        /* The following equation is derived so that there is no discontinuity in output amplitudes */
        /* and a LONG_MAX input always maps to a LONG_MAX output when the limiter is activated. */
        /* (NOTE: There **WILL** be a discontinuity in the slope of the output amplitudes when using the limiter.) */
        dcs->limiterthreshhold = LONG_MAX * (ONE - (fabs(dcs->dcshift) - dcs->limitergain));
    }

    return ST_SUCCESS;
}

/*
 * Start processing
 */
int st_dcshift_start(effp)
eff_t effp;
{
    dcs_t dcs = (dcs_t) effp->priv;

    if (effp->outinfo.channels != effp->ininfo.channels)
    {
        st_warn("DCSHIFT cannot handle different channels (in=%d, out=%d)"
             " use avg or pan", effp->ininfo.channels, effp->outinfo.channels);
    }

    if (effp->outinfo.rate != effp->ininfo.rate)
    {
        st_fail("DCSHIFT cannot handle different rates (in=%ld, out=%ld)"
             " use resample or rate", effp->ininfo.rate, effp->outinfo.rate);
        return ST_EOF;
    }

    dcs->clipped = 0;
    dcs->limited = 0;
    dcs->totalprocessed = 0;

    return ST_SUCCESS;
}

/* conversion. clipping could be smoother at high ends?
 * this could be a function on its own, with clip count and report
 * handled by eff_t and caller.
 */
static LONG clip(dcs_t dcs, const DCSHIFT_FLOAT v)
{
    if (v > LONG_MAX)
    {
         dcs->clipped++;
         return LONG_MAX;
    }
    else if (v < -LONG_MAX)
    {
        dcs->clipped++;
        return -LONG_MAX;
    }
    /* else */
    return (LONG) v;
}

#ifndef MIN
#define MIN(s1,s2) ((s1)<(s2)?(s1):(s2))
#endif

/*
 * Process data.
 */
int st_dcshift_flow(effp, ibuf, obuf, isamp, osamp)
eff_t effp;
LONG *ibuf, *obuf;
LONG *isamp, *osamp;
{
    dcs_t dcs = (dcs_t) effp->priv;
    register DCSHIFT_FLOAT dcshift = dcs->dcshift;
    register DCSHIFT_FLOAT limitergain = dcs->limitergain;
    register DCSHIFT_FLOAT limiterthreshhold = dcs->limiterthreshhold;
    register DCSHIFT_FLOAT sample;
    register LONG len;

    len = MIN(*osamp, *isamp);

    /* report back dealt with amount. */
    *isamp = len; *osamp = len;

    if (dcs->uselimiter)
    {
        dcs->totalprocessed += len;

        for (;len>0; len--)
            {
                sample = *ibuf++;

                if (sample > limiterthreshhold && dcshift > 0)
                {
                        sample =  (sample - limiterthreshhold) * limitergain / (LONG_MAX - limiterthreshhold) + limiterthreshhold + dcshift;
                        dcs->limited++;
                }
                else if (sample < -limiterthreshhold && dcshift < 0)
                {
                        sample =  (sample + limiterthreshhold) * limitergain / (LONG_MAX - limiterthreshhold) - limiterthreshhold + dcshift;
                        dcs->limited++;
                }
                else
                {
                        sample = dcshift * LONG_MAX + sample;
                }

                *obuf++ = clip(dcs, sample);
            }
    }
    else
    {
        /* quite basic, with clipping */
        for (;len>0; len--)
                *obuf++ = clip(dcs, dcshift * LONG_MAX + *ibuf++);
    }
    return ST_SUCCESS;
}

/*
 * Do anything required when you stop reading samples.
 * Don't close input file!
 */
int st_dcshift_stop(effp)
eff_t effp;
{
    dcs_t dcs = (dcs_t) effp->priv;

    if (dcs->limited)
    {
        st_warn("DCSHIFT limited %d values (%d percent).",
             dcs->limited, (int) (dcs->limited * 100.0 / dcs->totalprocessed));
    }
    if (dcs->clipped)
    {
        if (dcs->dcshift > 0)
        {
             st_warn("DCSHIFT clipped %d values, dcshift=%f too high...",
                  dcs->clipped, dcs->dcshift);
        }
        else
        {
             st_warn("DCSHIFT clipped %d values, dcshift=%f too low...",
                  dcs->clipped, dcs->dcshift);
        }
    }
    return ST_SUCCESS;
}