ref: 8dd76de3403b5b463f120575bb6b2e5c92a07e6e
dir: /src/deemph.h/
/*
* July 5, 1991
*
* Deemphases Filter
*
* Fixed deemphasis filter for processing pre-emphasized audio cd samples
* 09/02/98 (c) Heiko Eissfeldt
* License: LGPL (Lesser Gnu Public License)
*
* This implements the inverse filter of the optional pre-emphasis stage as
* defined by ISO 908 (describing the audio cd format).
*
* Background:
* In the early days of audio cds, there were recording problems
* with noise (for example in classical recordings). The high dynamics
* of audio cds exposed these recording errors a lot.
*
* The commonly used solution at that time was to 'pre-emphasize' the
* trebles to have a better signal-noise-ratio. That is trebles were
* amplified before recording, so that they would give a stronger
* signal compared to the underlying (tape)noise.
*
* For that purpose the audio signal was prefiltered with the following
* frequency response (simple first order filter):
*
* V (in dB)
* ^
* |
* | _________________
* | /
* | / |
* | 20 dB / decade ->/ |
* | / |
* |____________________/_ _ |_ _ _ _ _ _ _ _ _ _ _ _ _ lg f
* |0 dB | |
* | | |
* | | |
* 3.1KHz ca. 10KHz
*
* So the recorded audio signal has amplified trebles compared to the
* original.
* HiFi cd players do correct this by applying an inverse filter
* automatically, the cd-rom drives or cd burners used by digital
* sampling programs (like cdda2wav) however do not.
*
* So, this is what this effect does.
*
* Here is the gnuplot file for the frequency response
of the deemphasis. The error is below +-0.1dB
-------- Start of gnuplot file ---------------------
# first define the ideal filter. We use the tenfold sampling frequency.
T=1./441000.
OmegaU=1./15E-6
OmegaL=15./50.*OmegaU
V0=OmegaL/OmegaU
H0=V0-1.
B=V0*tan(OmegaU*T/2.)
# the coefficients follow
a1=(B - 1.)/(B + 1.)
b0=(1.0 + (1.0 - a1) * H0/2.)
b1=(a1 + (a1 - 1.0) * H0/2.)
# helper variables
D=b1/b0
o=2*pi*T
H2(f)=b0*sqrt((1+2*cos(f*o)*D+D*D)/(1+2*cos(f*o)*a1+a1*a1))
#
# now approximate the ideal curve with a fitted one for sampling
frequency
# of 44100 Hz. Fitting parameters are
# amplification at high frequencies V02
# and tau of the upper edge frequency OmegaU2 = 2 *pi * f(upper)
T2=1./44100.
V02=0.3365
OmegaU2=1./19E-6
B2=V02*tan(OmegaU2*T2/2.)
# the coefficients follow
a12=(B2 - 1.)/(B2 + 1.)
b02=(1.0 + (1.0 - a12) * (V02-1.)/2.)
b12=(a12 + (a12 - 1.0) * (V02-1.)/2.)
# helper variables
D2=b12/b02
o2=2*pi*T2
H(f)=b02*sqrt((1+2*cos(f*o2)*D2+D2*D2)/(1+2*cos(f*o2)*a12+a12*a12))
# plot best, real, ideal, level with halved attenuation,
# level at full attentuation, 10fold magnified error
set logscale x
set grid xtics ytics mxtics mytics
plot [f=1000:20000] [-12:2] 20*log10(H(f)),20*log10(H2(f)),
20*log10(OmegaL/(2*
pi*f)), 0.5*20*log10(V0), 20*log10(V0), 200*log10(H(f)/H2(f))
pause -1 "Hit return to continue"
-------- End of gnuplot file ---------------------
*/
/* filter coefficients */
p->a1 = -0.62786881719628784282;
p->b0 = 0.45995451989513153057;
p->b1 = -0.08782333709141937339;
/* The sample-rate must be 44100 as this has been harded coded into the
* pre-calculated filter coefficients.
*/
if (effp->ininfo.rate != 44100) {
st_fail("Sample rate must be 44100 (audio-CD)");
return ST_EOF;
}