ref: 9228e6c128882dcb8bbd5a855eb7fb8a1a22d2a3
dir: /src/tx16w.c/
/* Yamaha TX-16W sampler file support
*
* May 20, 1993
* Copyright 1993 Rob Talley (rob@aii.com)
* This source code is freely redistributable and may be used for
* any purpose. This copyright notice and the following copyright
* notice must be maintained intact. No warranty whatsoever is
* provided. This code is furnished AS-IS as a component of the
* larger work Copyright 1991 Lance Norskog and Sundry Contributors.
* Much appreciation to ross-c for his sampConv utility for SGI/IRIX
* from where these methods were derived.
*
* Jan 24, 1994
* Pat McElhatton, HP Media Technology Lab <patmc@apollo.hp.com>
* Handles reading of files which do not have the sample rate field
* set to one of the expected by looking at some other bytes in the
* attack/loop length fields, and defaulting to 33kHz if the sample
* rate is still unknown.
*
* January 12, 1995
* Copyright 1995 Mark Lakata (lakata@physics.berkeley.edu)
* Additions to tx16w.c SOX handler. This version writes as well as
* reads TX16W format.
*
* July 31, 1998
* Cleaned up by Leigh Smith (leigh@psychokiller.dialix.oz.au)
* for incorporation into the main sox distribution.
*
* September 24, 1998
* Forced output to mono signed words to match input. It was basically
* doing this anyways but now the user will see a display that it's been
* overridden. cbagwell@sprynet.com
*
*/
#define TXMAXLEN 0x3FF80
#include <stdio.h>
#include <string.h>
#include "sox_i.h"
/* Private data for TX16 file */
typedef struct txwstuff {
sox_size_t rest; /* bytes remaining in sample file */
} *txw_t;
struct WaveHeader_ {
char filetype[6]; /* = "LM8953", */
unsigned char
nulls[10],
dummy_aeg[6], /* space for the AEG (never mind this) */
format, /* 0x49 = looped, 0xC9 = non-looped */
sample_rate, /* 1 = 33 kHz, 2 = 50 kHz, 3 = 16 kHz */
atc_length[3], /* I'll get to this... */
rpt_length[3],
unused[2]; /* set these to null, to be on the safe side */
} ;
static const unsigned char magic1[4] = {0, 0x06, 0x10, 0xF6};
static const unsigned char magic2[4] = {0, 0x52, 0x00, 0x52};
/* SJB: dangerous static variables */
static sox_size_t tx16w_len=0;
static sox_size_t writedone=0;
/*
* Do anything required before you start reading samples.
* Read file header.
* Find out sampling rate,
* size and encoding of samples,
* mono/stereo/quad.
*/
static int sox_txwstartread(sox_format_t * ft)
{
int c;
char filetype[7];
char format;
char sample_rate;
sox_size_t num_samp_bytes = 0;
char gunk[8];
int blewIt;
uint32_t trash;
txw_t sk = (txw_t) ft->priv;
/* If you need to seek around the input file. */
if (! ft->seekable)
{
sox_fail_errno(ft,SOX_EOF,"txw input file must be a file, not a pipe");
return(SOX_EOF);
}
/* This is dumb but portable, just count the bytes til EOF */
while (sox_readb(ft, (unsigned char *)&trash) != SOX_EOF)
num_samp_bytes++;
num_samp_bytes -= 32; /* calculate num samples by sub header size */
sox_seeki(ft, 0, 0); /* rewind file */
sk->rest = num_samp_bytes; /* set how many sample bytes to read */
/* first 6 bytes are file type ID LM8953 */
sox_readb(ft, (unsigned char *)&filetype[0]);
sox_readb(ft, (unsigned char *)&filetype[1]);
sox_readb(ft, (unsigned char *)&filetype[2]);
sox_readb(ft, (unsigned char *)&filetype[3]);
sox_readb(ft, (unsigned char *)&filetype[4]);
sox_readb(ft, (unsigned char *)&filetype[5]);
filetype[6] = '\0';
for( c = 16; c > 0 ; c-- ) /* Discard next 16 bytes */
sox_readb(ft, (unsigned char *)&trash);
sox_readb(ft, (unsigned char *)&format);
sox_readb(ft, (unsigned char *)&sample_rate);
/*
* save next 8 bytes - if sample rate is 0, then we need
* to look at gunk[2] and gunk[5] to get real rate
*/
for( c = 0; c < 8; c++ )
sox_readb(ft, (unsigned char *)&(gunk[c]));
/*
* We should now be pointing at start of raw sample data in file
*/
/* Check to make sure we got a good filetype ID from file */
sox_debug("Found header filetype %s",filetype);
if(strcmp(filetype,"LM8953"))
{
sox_fail_errno(ft,SOX_EHDR,"Invalid filetype ID in input file header, != LM8953");
return(SOX_EOF);
}
/*
* Set up the sample rate as indicated by the header
*/
switch( sample_rate ) {
case 1:
ft->signal.rate = 33333;
break;
case 2:
ft->signal.rate = 50000;
break;
case 3:
ft->signal.rate = 16667;
break;
default:
blewIt = 1;
switch( gunk[2] & 0xFE ) {
case 0x06:
if ( (gunk[5] & 0xFE) == 0x52 ) {
blewIt = 0;
ft->signal.rate = 33333;
}
break;
case 0x10:
if ( (gunk[5] & 0xFE) == 0x00 ) {
blewIt = 0;
ft->signal.rate = 50000;
}
break;
case 0xF6:
if ( (gunk[5] & 0xFE) == 0x52 ) {
blewIt = 0;
ft->signal.rate = 16667;
}
break;
}
if ( blewIt ) {
sox_debug("Invalid sample rate identifier found %d", (int)sample_rate);
ft->signal.rate = 33333;
}
}
sox_debug("Sample rate = %g", ft->signal.rate);
ft->signal.channels = 1 ; /* not sure about stereo sample data yet ??? */
ft->signal.size = SOX_SIZE_16BIT; /* this is close enough */
ft->signal.encoding = SOX_ENCODING_SIGN2;
return(SOX_SUCCESS);
}
/*
* Read up to len samples from file.
* Convert to sox_sample_ts.
* Place in buf[].
* Return number of samples read.
*/
static sox_size_t sox_txwread(sox_format_t * ft, sox_ssample_t *buf, sox_size_t len)
{
txw_t sk = (txw_t) ft->priv;
sox_size_t done = 0;
unsigned char uc1,uc2,uc3;
unsigned short s1,s2;
/*
* This gets called by the top level 'process' routine.
* We will essentially get called with a buffer pointer
* and a max length to read. Graciously, it is always
* an even amount so we don't have to worry about
* hanging onto the left over odd samples since there
* won't be any. Something to look out for though :-(
* We return the number of samples we read.
* We will get called over and over again until we return
* 0 bytes read.
*/
/*
* This is ugly but it's readable!
* Read three bytes from stream, then decompose these into
* two unsigned short samples.
* TCC 3.0 appeared to do unwanted things, so we really specify
* exactly what we want to happen.
* Convert unsigned short to sox_sample_t then shift up the result
* so that the 12-bit sample lives in the most significant
* 12-bits of the sox_sample_t.
* This gets our two samples into the internal format which we
* deposit into the given buffer and adjust our counts respectivly.
*/
for(done = 0; done < len; ) {
if(sk->rest < 3) break; /* Finished reading from file? */
sox_readb(ft, &uc1);
sox_readb(ft, &uc2);
sox_readb(ft, &uc3);
sk->rest -= 3; /* adjust remaining for bytes we just read */
s1 = (unsigned short) (uc1 << 4) | (((uc2 >> 4) & 017));
s2 = (unsigned short) (uc3 << 4) | (( uc2 & 017 ));
*buf = (sox_ssample_t) s1;
*buf = (*buf << 20);
buf++; /* sample one is done */
*buf = (sox_ssample_t) s2;
*buf = (*buf << 20);
buf++; /* sample two is done */
done += 2; /* adjust converted & stored sample count */
}
return done;
}
static int sox_txwstartwrite(sox_format_t * ft)
{
struct WaveHeader_ WH;
sox_debug("tx16w selected output");
memset(&WH, 0, sizeof(struct WaveHeader_));
if (ft->signal.channels != 1)
sox_report("tx16w is overriding output format to 1 channel.");
ft->signal.channels = 1 ; /* not sure about stereo sample data yet ??? */
if (ft->signal.size != SOX_SIZE_16BIT || ft->signal.encoding != SOX_ENCODING_SIGN2)
sox_report("tx16w is overriding output format to size Signed Word format.");
ft->signal.size = SOX_SIZE_16BIT; /* this is close enough */
ft->signal.encoding = SOX_ENCODING_SIGN2;
/* If you have to seek around the output file */
if (! ft->seekable)
{
sox_fail_errno(ft,SOX_EOF,"Output .txw file must be a file, not a pipe");
return(SOX_EOF);
}
/* dummy numbers, just for place holder, real header is written
at end of processing, since byte count is needed */
sox_writebuf(ft, &WH, 32);
writedone = 32;
return(SOX_SUCCESS);
}
static sox_size_t sox_txwwrite(sox_format_t * ft, const sox_ssample_t *buf, sox_size_t len)
{
sox_size_t i;
sox_ssample_t w1,w2;
tx16w_len += len;
if (tx16w_len > TXMAXLEN) return 0;
for (i=0;i<len;i+=2) {
w1 = *buf++ >> 20;
if (i+1==len)
w2 = 0;
else {
w2 = *buf++ >> 20;
}
sox_writeb(ft, (w1 >> 4) & 0xFF);
sox_writeb(ft, (((w1 & 0x0F) << 4) | (w2 & 0x0F)) & 0xFF);
sox_writeb(ft, (w2 >> 4) & 0xFF);
writedone += 3;
}
return(len);
}
static int sox_txwstopwrite(sox_format_t * ft)
{
struct WaveHeader_ WH;
int AttackLength, LoopLength, i;
/* All samples are already written out. */
/* If file header needs fixing up, for example it needs the */
/* the number of samples in a field, seek back and write them here. */
sox_debug("tx16w:output finished");
memset(&WH, 0, sizeof(struct WaveHeader_));
strncpy(WH.filetype,"LM8953",6);
for (i=0;i<10;i++) WH.nulls[i]=0;
for (i=0;i<6;i++) WH.dummy_aeg[i]=0;
for (i=0;i<2;i++) WH.unused[i]=0;
for (i=0;i<2;i++) WH.dummy_aeg[i] = 0;
for (i=2;i<6;i++) WH.dummy_aeg[i] = 0x7F;
WH.format = 0xC9; /* loop off */
/* the actual sample rate is not that important ! */
if (ft->signal.rate < 24000) WH.sample_rate = 3;
else if (ft->signal.rate < 41000) WH.sample_rate = 1;
else WH.sample_rate = 2;
if (tx16w_len >= TXMAXLEN) {
sox_warn("Sound too large for TX16W. Truncating, Loop Off");
AttackLength = TXMAXLEN/2;
LoopLength = TXMAXLEN/2;
}
else if (tx16w_len >=TXMAXLEN/2) {
AttackLength = TXMAXLEN/2;
LoopLength = tx16w_len - TXMAXLEN/2;
if (LoopLength < 0x40) {
LoopLength +=0x40;
AttackLength -= 0x40;
}
}
else if (tx16w_len >= 0x80) {
AttackLength = tx16w_len -0x40;
LoopLength = 0x40;
}
else {
AttackLength = 0x40;
LoopLength = 0x40;
for(i=tx16w_len;i<0x80;i++) {
sox_writeb(ft, 0);
sox_writeb(ft, 0);
sox_writeb(ft, 0);
writedone += 3;
}
}
/* Fill up to 256 byte blocks; the TX16W seems to like that */
while ((writedone % 0x100) != 0) {
sox_writeb(ft, 0);
writedone++;
}
WH.atc_length[0] = 0xFF & AttackLength;
WH.atc_length[1] = 0xFF & (AttackLength >> 8);
WH.atc_length[2] = (0x01 & (AttackLength >> 16)) +
magic1[WH.sample_rate];
WH.rpt_length[0] = 0xFF & LoopLength;
WH.rpt_length[1] = 0xFF & (LoopLength >> 8);
WH.rpt_length[2] = (0x01 & (LoopLength >> 16)) +
magic2[WH.sample_rate];
sox_rewind(ft);
sox_writebuf(ft, &WH, 32);
return(SOX_SUCCESS);
}
/* Yamaha TX16W and SY99 waves */
static const char *txwnames[] = {
"txw",
NULL
};
static sox_format_handler_t sox_txw_format = {
txwnames,
0,
sox_txwstartread,
sox_txwread,
sox_format_nothing,
sox_txwstartwrite,
sox_txwwrite,
sox_txwstopwrite,
sox_format_nothing_seek
};
const sox_format_handler_t *sox_txw_format_fn(void);
const sox_format_handler_t *sox_txw_format_fn(void)
{
return &sox_txw_format;
}