ref: c52b45fa675267acd65b888ae16bff90b731d24b
dir: /soxexam.txt/
SoX(1) SoX(1)
NAME
soxexam - SoX Examples (CHEAT SHEET)
CONVERSIONS
Introduction
In general, sox will attempt to take an input sound file
format and convert it to a new file format using a similar
data type and sample rate. For instance, "sox monkey.au
monkey.wav" would try and convert the mono 8000Hz u-law
sample .au file that comes with sox to a 8000Hz u-law .wav
file.
If an output format doesn't support the same data type as
the input file then sox will generally select a default
data type to save it in. You can override the default
data type selection by using command line options. This
is also useful for producing a output file with higher or
lower precision data and/or sample rate.
Most file formats that contain headers can automatically
be read in. When working with headerless file formats
then a user must manually tell sox the data type and sam�
ple rate using command line options.
When working with headerless files (raw files), you may
take advantage of they pseudo-file types of .ub, .uw, .sb,
.sw, .ul, and .sl. By using these extensions on your
filenames you will not have to specify the corrisponding
options on the command line.
Precision
The following data types and formats can be represented by
their total uncompressed bit precision. When converting
from one data type to another care must be taken to insure
it has an equal or greater precision. If not then the
audio quality will be degraded. This is not always a bad
thing when your working with things such as voice audio
and are concerned about disk space or bandwidth of the
audio data.
Data Format Precision
___________ _________
unsigned byte 8-bit
signed byte 8-bit
u-law 12-bit
a-law 12-bit
unsigned word 16-bit
signed word 16-bit
ADPCM 16-bit
GSM 16-bit
unsigned long 32-bit
signed long 32-bit
December 10, 1999 1
SoX(1) SoX(1)
___________ _________
Examples
Use the '-V' option on all your command lines. It makes
SoX print out its idea of what is going on. '-V' is your
friend.
To convert from unsigned bytes at 8000 Hz to signed words
at 8000 Hz:
sox -r 8000 -c 1 filename.ub newfile.sw
To convert from Apple's AIFF format to Microsoft's WAV
format:
sox filename.aiff filename.wav
To convert from mono raw 8000 Hz 8-bit unsigned PCM data
to a WAV file:
sox -r 8000 -u -b -c 1 filename.raw filename.wav
SoX is great to use along with other command line programs
by passing data between the programs using pipelines. The
most common example is to use mpg123 to convert mp3 files
in to wav files. The following command line will do this:
mpg123 -b 10000 -s filename.mp3 | sox -t raw -r 44100 -s
-w -c 2 - filename.wav
When working with totally unknown audio data then the
"auto" file format may be of use. It attempts to guess
what the file type is and then you may save it in to a
known audio format.
sox -V -t auto filename.snd filename.wav
It is important to understand how the internals of SoX
work with compressed audio including u-law, a-law, ADPCM,
or GSM. SoX takes ALL input data types and converts them
to uncompressed 32-bit signed data. It will then convert
this internal version into the requested output format.
This means unneeded noise can be introduced from decom�
pressing data and then recompressing. If applying multi�
ple effects to audio data it is best to save the interme�
diate data as PCM data. After the final effect is per�
formed then you can specify it as a compressed output for�
mat. This will keep noise introduction to a minimum.
The following example is to apply various effects to an
8000 Hz ADPCM input file and then end up with the final
file as 44100 Hz ADPCM.
December 10, 1999 2
SoX(1) SoX(1)
sox firstfile.wav -r 44100 -s -w secondfile.wav
sox secondfile.wav thirdfile.wav swap
sox thirdfile.wav -a -b finalfile.wav mask
Under a DOS shell, you can convert several audio files to
an new output format using something similar to the fol�
lowing command line:
FOR %X IN (*.RAW) DO sox -r 11025 -w -s -t raw $X $X.wav
EFFECTS
Special thanks goes to Juergen Mueller
(jmeuller@uia.au.ac.be) for this write up on effects.
Introduction:
The core problem is that you need some experience in using
effects in order to say "that any old sound file sounds
with effects absolutely hip". There isn't any rule-based
system which tell you the correct setting of all the
parameters for every effect. But after some time you will
become an expert in using effects.
Here are some examples which can be used with any music
sample. (For a sample where only a single instrument is
playing, extreme parameter setting may make well-known
"typically" or "classical" sounds. Likewise, for drums,
vocals or guitars.)
Single effects will be explained and some given parameter
settings that can be used to understand the theorie by
listening to the sound file with the added effect.
Using multiple effects in parallel or in sequel can result
either in very perfect sound or ( mostly ) in a dramatic
overloading in variations of sounds such that your ear may
follow the sound but you will feel unsatisfied. Hence, for
the first time using effects try to compose them as less
as possible. We don't regard the composition of effects in
the examples because to many combinations are possible and
you really need a very fast maschine and a lot of memory
to play them in real-time.
And real-time playing of sounds will speed up learning the
parameter setting.
Basically, we will use the "play" front-end of SOX since
it is easier to listen sounds coming out of the speaker or
earphone instead of looking at cryptical data in sound
files.
For easy listening of file.xxx ( "xxx" is any sound format
):
December 10, 1999 3
SoX(1) SoX(1)
play file.xxx effect-name effect-parameters
Or more SOX-like ( for "dsp" output ):
sox file.xxx -t ossdsp -w -s /dev/dsp effect-name
effect-parameters
or ( for "au" output ):
sox file.xxx -t sunau -w -s /dev/audio effect-name
effect-parameters
And for date freaks:
sox file.xxx file.yyy effect-name effect-parameters
Additional options can be used. However, in this case, for
real-time playing you'll need a very fast machine.
Notes:
I played all examples in real-time on a Pentium 100 with
32 Mb and Linux 2.0.30 using a self-recorded sample ( 3:15
min long in "wav" format with 44.1 kHz sample rate and
stereo 16 bit ). The sample should not contain any of the
effects. However, if you take any recording of a sound
track from radio or tape or cd, and it sounds like a live
concert or ten people are playing the same rhythm with
their drums or funky-groves, then take any other sample.
(Typically, less then four different intruments and no
synthesizer in the sample is suitable. Likewise, the com�
bination vocal, drums, bass and guitar.)
Effects:
Echo
An echo effect can be naturally found in the mountains,
standing somewhere on a moutain and shouting a single word
will result in one or more repetitions of the word ( if
not, turn a bit around ant try next, or climb to the next
mountain ).
However, the time difference between shouting and repeat�
ing is the delay (time), its loudness is the decay. Multi�
ple echos can have different delays and decays.
Very popular is using echos to play an instrument with
itself together, like some guitar players ( Brain May from
Queen ) or vocalists are doing. For music samples of more
than one instrument, echo can be used to add a second sam�
ple shortly after the original one.
This will sound as doubling the number of instruments
December 10, 1999 4
SoX(1) SoX(1)
playing the same sample:
play file.xxx echo 0.8 0.88 60.0 0.4
If the delay is very short then it sound like a (metallic)
roboter playing music:
play file.xxx echo 0.8 0.88 6.0 0.4
Longer delay will sound like a open air concert in the
mountains:
play file.xxx echo 0.8 0.9 1000.0 0.3
One mountain more, and:
play file.xxx echo 0.8 0.9 1000.0 0.3 1800.0 0.25
Echos
Like the echo effect, echos stand for "ECHO in Sequel",
that is the first echos takes the input, the second the
input and the first echos, the third the input and the
first and the second echos, ... and so on. Care should be
taken using many echos ( see introduction ); a single
echos has the same effect as a single echo.
The sample will be bounced twice in symmetric echos:
play file.xxx echos 0.8 0.7 700.0 0.25 700.0 0.3
The sample will be bounced twice in asymmetric echos:
play file.xxx echos 0.8 0.7 700.0 0.25 900.0 0.3
The sample will sound as played in a garage:
play file.xxx echos 0.8 0.7 40.0 0.25 63.0 0.3
Chorus
The chorus effect has its name because it will often be
used to make a single vocal sound like a chorus. But it
can be applied to other instrument samples too.
It works like the echo effect with a short delay, but the
delay isn't constant. The delay is varied using a sin�
odial or triangular modulation. The modulation depth
defines the range the modulated delay is played before or
after the delay. Hence the delayed sound will sound slower
or faster, that is the delayed sound tuned around the
original one, like in a chorus where some vocal are a bit
out of tune.
December 10, 1999 5
SoX(1) SoX(1)
The typical delay is around 40ms to 60ms, the speed of the
modualtion is best near 0.25Hz and the modulation depth
around 2ms.
A single delay will make the sample more overloaded:
play file.xxx chorus 0.7 0.9 55.0 0.4 0.25 2.0 -t
Two delays of the original samples sound like this:
play file.xxx chorus 0.6 0.9 50.0 0.4 0.25 2.0 -t
60.0 0.32 0.4 1.3 -s
A big chorus of the sample is ( three additional samples
):
play file.xxx chorus 0.5 0.9 50.0 0.4 0.25 2.0 -t
60.0 0.32 0.4 2.3 -t 40.0 0.3 0.3 1.3 -s
Flanger
The flanger effect is like the chorus effect, but the
delay varies between 0ms and maximal 5ms. It sound like
wind blowing, sometimes faster or slower including changes
of the speed.
The flanger effect is widely used in funk and soul music,
where the guitar sound varies frequently slow or a bit
faster.
The typical delay is around 3ms to 5ms, the speed of the
modulation is best near 0.5Hz.
Now, let's groove the sample:
play file.xxx flanger 0.6 0.87 3.0 0.9 0.5 -s
listen carefully between the difference of sinodial and
triangular modulation:
play file.xxx flanger 0.6 0.87 3.0 0.9 0.5 -t
If the decay is a bit lower, than the effect sounds more
popular:
play file.xxx flanger 0.8 0.88 3.0 0.4 0.5 -t
The drunken loundspeaker system:
play file.xxx flanger 0.9 0.9 4.0 0.23 1.3 -s
Reverb
The reverb effect is often used in audience hall which are
December 10, 1999 6
SoX(1) SoX(1)
to small or to many visitors disturb the reflection of
sound at the walls to make the sound played more monumen�
tal. You can try the reverb effect in your bathroom or
garage or sport halls by shouting loud some words. You'll
hear the words reflected from the walls.
The biggest problem in using the reverb effect is the cor�
rect setting of the (wall) delays such that the sound is
relistic an doesn't sound like music playing in a tin or
overloaded feedback distroys any illusion of any big hall.
To help you for much realisitc reverb effects, you should
decide first, how long the reverb should take place until
it is not loud enough to be registered by your ears. This
is be done by the reverb time "t", in small halls 200ms in
bigger one 1000ms, if you like. Clearly, the walls of such
a hall aren't far away, so you should define its setting
be given every wall its delay time. However, if the wall
is to far eway for the reverb time, you won't hear the
reverb, so the nearest wall will be best "t/4" delay and
the farest "t/2". You can try other distances as well,
but it won't sound very realistic. The walls shouldn't
stand to close to each other and not in a multiple
interger distance to each other ( so avoid wall like:
200.0 and 202.0, or something like 100.0 and 200.0 ).
Since audience halls do have a lot of walls, we will start
designing one beginning with one wall:
play file.xxx reverb 1.0 600.0 180.0
One wall more:
play file.xxx reverb 1.0 600.0 180.0 200.0
Next two walls:
play file.xxx reverb 1.0 600.0 180.0 200.0 220.0
240.0
Now, why not a futuristic hall with six walls:
play file.xxx reverb 1.0 600.0 180.0 200.0 220.0
240.0 280.0 300.0
If you run out of machine power or memory, then stop as
much applications as possible ( every interupt will con�
sume a lot of cpu time which for bigger halls is abso�
lutely neccessary ).
Phaser
The phaser effect is like the flanger effect, but it uses
a reverb instead of an echo and does phase shifting.
You'll hear the difference in the examples comparing both
December 10, 1999 7
SoX(1) SoX(1)
effects ( simply change the effect name ). The delay mod�
ulation can be done sinodial or triangular, preferable is
the later one for multiple instruments playing. For single
instrument sounds the sinodial phaser effect will give a
sharper phasing effect. The decay shouln't be to close to
1.0 which will cause dramatic feedback. A good range is
about 0.5 to 0.1 for the decay.
We will take a parameter setting as for the flanger before
( gain-out is lower since feedback can raise the output
dramatically ):
play file.xxx phaser 0.8 0.74 3.0 0.4 0.5 -t
The drunken loundspeaker system ( now less alkohol ):
play file.xxx phaser 0.9 0.85 4.0 0.23 1.3 -s
A popular sound of the sample is as follows:
play file.xxx phaser 0.89 0.85 1.0 0.24 2.0 -t
The sample sounds if ten springs are in your ears:
play file.xxx phaser 0.6 0.66 3.0 0.6 2.0 -t
Other effects ( copy, rate, avg, stat, vibro, lowp, highp,
band, reverb )
The other effects are simply to use. However, an "easy to
use manual" should be given here.
More effects ( to do ! )
There are a lot of effects around like noise gates, com�
pressors, waw-waw, stereo effects and so on. They should
be implemented making SOX to be more useful in sound mix�
ing technics coming together with a great varity of dif�
ferent sound effects.
Combining effects be using then in parallel or sequel on
different channels needs some easy mechanism which is
real-time stable.
Really missing, is the changing of the parameters, start�
ing and stoping of effects while playing samples in real-
time!
Good luck and have fun with all the effects!
Juergen Mueller (jmueller@uia.ua.ac.be)
December 10, 1999 8
SoX(1) SoX(1)
SEE ALSO
sox(1), play(1), rec(1)
December 10, 1999 9